When we have VFs and PFs on same host, the VFs are activated within
the mlx4_core module before the mlx4_ib kernel module is loaded.

When the mlx4_ib module initializes the PF (master), it now creates
MAD paravirtualization contexts for any VFs that already active.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Remove the error returns for IB ports from mlx4_ib_add,
mlx4_INIT_PORT_wrapper, and mlx4_CLOSE_PORT_wrapper.

Currently, SRIOV is supported only for devices for which the
link layer is IB on all ports; RoCE support will be added later.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

1. Allow only master to change node description.
2. Prevent AH leakage in send mads.
3. Take device part number from PCI structure, so that guests see the
   VF part number (and not the PF part number).
4. Place the device revision ID into caps structure at startup.
5. SET_PORT in update_gids_task needs to go through wrapper on master.
6. In mlx4_ib_event(), PORT_MGMT_EVENT needs be handled in a work
   queue on the master, since it propagates events to slaves using
   GEN_EQE.
7. Do not support FMR on slaves.
8. Add spinlock to slave_event(), since it is called both in interrupt
   context and in process context (due to 6 above, and also if
   smp_snoop is used).  This fix was found and implemented by Saeed
   Mahameed <saeedm@mellanox.com>
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

For IB ports, we paravirtualize the GUID at index 0 on slaves.  The
GUID at index 0 seen by a slave is the actual GUID occupying the GUID
table at the slave-id index.

The driver, by default, requests at startup time that subnet manager
populate its entire guid table with GUIDs. These guids are then mapped
(paravirtualized) to the slaves, and appear for each slave as its GUID
at index 0.

Until each slave has such a guid, its port status is DOWN.

The guid table is cached to support special QP paravirtualization, and
event propagation to slaves on guid change (we test to see if the guid
really changed before propagating an event to the slave).

To support this caching, add capability to __mlx4_ib_query_gid() to
obtain the network view (i.e., physical view) gid at index X, not just
the host (paravirtualized) view.

Based on a patch from Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

MCG paravirtualization support includes:
- Creating multicast groups by VFs, and keeping accounting of them
- Leaving multicast groups by VFs
- Updating SM only with real changes in the overall picture of MCGs status
- Creation of MGID=0 groups (let SM choose MGID)

Note that the MCG module maintains its own internal MCG object
reference counts.  The reason for this is that the IB core is used to
track only the multicast groups joins generated by the PF it runs
over.  The PF IB core layer is unaware of slaves, so it cannot be used
to keep track of MCG joins they generate.
Signed-off-by: NOren Duer <oren@mellanox.co.il>
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The MAD_IFC firmware command fulfills two functions.

First, it is used in the QP0/QP1 MAD-handling flow to obtain
information from the FW (for answering queries), and for setting
variables in the HCA (MAD SET packets).

For this, MAD_IFC should provide the FW (physical) view of the data.
This is the view that OpenSM needs.  We call this the "network view".

In the second case, MAD_IFC is used by various verbs to obtain data
regarding the local HCA (e.g., ib_query_device()).  We call this the
"host view".

This data needs to be paravirtualized.

MAD_IFC therefore needs a wrapper function, and also needs another
flag indicating whether it should provide the network view (when it is
called by ib_process_mad in special-qp packet handling), or the host
view (when it is called while implementing a verb).

There are currently 2 flag parameters in mlx4_MAD_IFC already:
ignore_bkey and ignore_mkey.  These two parameters are replaced by a
single "mad_ifc_flags" parameter, with different bits set for each
flag.  A third flag is added: "network-view/host-view".
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This requires:

1. Replacing the paravirtualized P_Key index (inserted by the guest)
   with the real P_Key index.

2. For UD QPs, placing the guest's true source GID index in the
   address path structure mgid field, and setting the ud_force_mgid
   bit so that the mgid is taken from the QP context and not from the
   WQE when posting sends.

3. For UC and RC QPs, placing the guest's true source GID index in the
   address path structure mgid field.

4. For tunnel and proxy QPs, setting the Q_Key value reserved for that
   proxy/tunnel pair.

Since not all the above adjustments occur in all the QP transitions,
the QP transitions require separate wrapper functions.

Secondly, initialize the P_Key virtualization table to its default
values: Master virtualized table is 1-1 with the real P_Key table,
guest virtualized table has P_Key index 0 mapped to the real P_Key
index 0, and all the other P_Key indices mapped to the reserved
(invalid) P_Key at index 127.

Finally, add logic in smp_snoop for maintaining the phys_P_Key_cache.
and generating events on the master only if a P_Key actually changed.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Allocate SR-IOV paravirtualization resources and MAD demuxing contexts
on the master.

This has two parts.  The first part is to initialize the structures to
contain the contexts.  This is done at master startup time in
mlx4_ib_init_sriov().

The second part is to actually create the tunneling resources required
on the master to support a slave.  This is performed the master
detects that a slave has started up (MLX4_DEV_EVENT_SLAVE_INIT event
generated when a slave initializes its comm channel).

For the master, there is no such startup event, so it creates its own
tunneling resources when it starts up.  In addition, the master also
creates the real special QPs.  The ib_core layer on the master causes
creation of proxy special QPs, since the master is also
paravirtualized at the ib_core layer.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The sm_lock spinlock is taken in the process context by
mlx4_ib_modify_device, and in the interrupt context by update_sm_ah,
so we need to take that spinlock with irqsave, and release it with
irqrestore.

Lockdeps reports this as follows:

    [ INFO: inconsistent lock state ]
    3.5.0+ #20 Not tainted
    inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
    swapper/0/0 [HC1[1]:SC0[0]:HE0:SE1] takes:
    (&(&ibdev->sm_lock)->rlock){?.+...}, at: [<ffffffffa028af1d>] update_sm_ah+0xad/0x100 [mlx4_ib]
    {HARDIRQ-ON-W} state was registered at:
      [<ffffffff810b84a0>] mark_irqflags+0x120/0x190
      [<ffffffff810b9ce7>] __lock_acquire+0x307/0x4c0
      [<ffffffff810b9f51>] lock_acquire+0xb1/0x150
      [<ffffffff815523b1>] _raw_spin_lock+0x41/0x50
      [<ffffffffa028d563>] mlx4_ib_modify_device+0x63/0x240 [mlx4_ib]
      [<ffffffffa026d1fc>] ib_modify_device+0x1c/0x20 [ib_core]
      [<ffffffffa026c353>] set_node_desc+0x83/0xc0 [ib_core]
      [<ffffffff8136a150>] dev_attr_store+0x20/0x30
      [<ffffffff81201fd6>] sysfs_write_file+0xe6/0x170
      [<ffffffff8118da38>] vfs_write+0xc8/0x190
      [<ffffffff8118dc01>] sys_write+0x51/0x90
      [<ffffffff8155b869>] system_call_fastpath+0x16/0x1b

    ...
    *** DEADLOCK ***

    1 lock held by swapper/0/0:

    stack backtrace:
    Pid: 0, comm: swapper/0 Not tainted 3.5.0+ #20
    Call Trace:
    <IRQ>  [<ffffffff810b7bea>] print_usage_bug+0x18a/0x190
    [<ffffffff810b7370>] ? print_irq_inversion_bug+0x210/0x210
    [<ffffffff810b7fb2>] mark_lock_irq+0xf2/0x280
    [<ffffffff810b8290>] mark_lock+0x150/0x240
    [<ffffffff810b84ef>] mark_irqflags+0x16f/0x190
    [<ffffffff810b9ce7>] __lock_acquire+0x307/0x4c0
    [<ffffffffa028af1d>] ? update_sm_ah+0xad/0x100 [mlx4_ib]
    [<ffffffff810b9f51>] lock_acquire+0xb1/0x150
    [<ffffffffa028af1d>] ? update_sm_ah+0xad/0x100 [mlx4_ib]
    [<ffffffff815523b1>] _raw_spin_lock+0x41/0x50
    [<ffffffffa028af1d>] ? update_sm_ah+0xad/0x100 [mlx4_ib]
    [<ffffffffa026b2fa>] ? ib_create_ah+0x1a/0x40 [ib_core]
    [<ffffffffa028af1d>] update_sm_ah+0xad/0x100 [mlx4_ib]
    [<ffffffff810c27c3>] ? is_module_address+0x23/0x30
    [<ffffffffa028b05b>] handle_port_mgmt_change_event+0xeb/0x150 [mlx4_ib]
    [<ffffffffa028c177>] mlx4_ib_event+0x117/0x160 [mlx4_ib]
    [<ffffffff81552501>] ? _raw_spin_lock_irqsave+0x61/0x70
    [<ffffffffa022718c>] mlx4_dispatch_event+0x6c/0x90 [mlx4_core]
    [<ffffffffa0221b40>] mlx4_eq_int+0x500/0x950 [mlx4_core]

Reported by: Or Gerlitz <ogerlitz@mellanox.com>
Tested-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Enable callers of mlx4_assign_eq to supply a pointer to cpu_rmap.
If supplied, the assigned IRQ is tracked using rmap infrastructure.
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the user queries for device capabilities, fill in the
masked_atomic_cap attribute with the real support level of atomic
capabilities instead of using a hard coded value.
Signed-off-by: NDotan Barak <dotanb@dev.mellanox.co.il>
Reviewed-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The port management change event can replace smp_snoop.  If the
capability bit for this event is set in dev-caps, the event is used
(by the driver setting the PORT_MNG_CHG_EVENT bit in the async event
mask in the MAP_EQ fw command).  In this case, when the driver passes
incoming SMP PORT_INFO SET mads to the FW, the FW generates port
management change events to signal any changes to the driver.

If the FW generates these events, smp_snoop shouldn't be invoked in
ib_process_mad(), or duplicate events will occur (once from the
FW-generated event, and once from smp_snoop).

In the case where the FW does not generate port management change
events smp_snoop needs to be invoked to create these events.  The flow
in smp_snoop has been modified to make use of the same procedures as
in the fw-generated-event event case to generate the port management
events (LID change, Client-rereg, Pkey change, and/or GID change).

Port management change event handling required changing the
mlx4_ib_event and mlx4_dispatch_event prototypes; the "param" argument
(last argument) had to be changed to unsigned long in order to
accomodate passing the EQE pointer.

We also needed to move the definition of struct mlx4_eqe from
net/mlx4.h to file device.h -- to make it available to the IB driver,
to handle port management change events.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Define pr_fmt and add some pr_debug prints.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The driver is modified to support three operation modes.

If supported by firmware use the device managed flow steering
API, that which we call device managed steering mode. Else, if
the firmware supports the B0 steering mode use it, and finally,
if none of the above, use the A0 steering mode.

When the steering mode is device managed, the code is modified
such that L2 based rules set by the mlx4_en driver for Ethernet
unicast and multicast, and the IB stack multicast attach calls
done through the mlx4_ib driver are all routed to use the device
managed API.

When attaching rule using device managed flow steering API,
the firmware returns a 64 bit registration id, which is to be
provided during detach.

Currently the firmware is always programmed during HCA initialization
to use standard L2 hashing. Future work should be done to allow
configuring the flow-steering hash function with common, non
proprietary means.
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1. Limit the max number of WQEs per QP reported when querying the
   device, so that ib_create_qp() will not fail for a QP size that the
   device claimed to support due to additional headroom WQEs being
   allocated.

2. Limit qp resources accepted for ib_create_qp() to the limits
   reported in ib_query_device().  In kernel space, make sure that the
   limits returned to the caller following qp creation also lie within
   the reported device limits. For userspace, report as before, and do
   adjustment in libmlx4 (so as not to break ABI).
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NSagi Grimberg <sagig@mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Commit e605b743 ("IB/mlx4: Increase the number of vectors (EQs)
available for ULPs") didn't handle correctly the case where there
aren't enough MSI-X vectors to increase the number of EQs, so only the
legacy EQs are allocated.  This results in an attempt to memset() to
zero the EQ table which was never allocated and a kernel crash.

Fix this by checking in the teardown flow if the table of EQs was ever
allocated.  Also remove some unneeded setting to zero of the EQ
related fields in struct mlx4_ib_dev.
Signed-off-by: NShlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

We need to use a different loop index for mlx4_counter_alloc() and for
device_create_file() iterations: the mlx4_counter_alloc() loop index
is used in the error flow to free counters.

If the same loop index is used for device_create_file() and, say, the
device_create_file() loop fails on the first iteration, the allocated
counters will not be freed.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Enable IB ULPs to use a larger portion of the device EQs (which map to
IRQs).  The mlx4_ib driver follows the mlx4_core framework of the EQs
to be divided among the device ports.  In this scheme, for each IB
port, the number of allocated EQs follows the number of cores, subject
to other system constraints, such as number available MSI-X vectors.
Signed-off-by: NShlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Signed-off-by: NShlomo Pongratz <shlomop@mellanox.com>

[ Replace one more printk_once() with pr_info_once().  - Roland ]
Signed-off-by: NRoland Dreier <roland@purestorage.com>

If the call to mlx4_MAD_IFC() fails in ib_link_query_port() we will
currently do 'return err;' which will leak 'in_mad' and 'out_mad'.  We
should instead do 'goto out;' where we'll properly free the memory we
previously allocated.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Acked-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

When the IB port is down, the active_speed value returned by the
MAD_IFC command is seven (7) which isn't among the defined IB speeds
in enum ib_port_speed, and this invalid speed value is passed up to
higher layers or applications who do port query.

Fix that by setting the speed to be SDR -- the lowest possible -- when
the port is down.
Signed-off-by: NRoland Dreier <roland@purestorage.com>

To issue a port query, use the QUERY_(Ethernet)_PORT command instead
of the MAD_IFC command, since MAD_IFC attempts to query the firmware
IB SMA, which is irrelevant for IBoE ports.

This allows us to handle both 10Gb/s and 40Gb/s rates (e.g in sysfs),
using QDR speed (10Gb/s) and width of 1X or 4X.
Signed-off-by: NDotan Barak <dotanb@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

While doing the work for commit a6f7feae ("IB/mlx4: pass SMP
vendor-specific attribute MADs to firmware") we realized that the
firmware would respond on all sorts of vendor-specific MADs.
Therefore commit 97285b78 ("mlx4_core: Add extended port
capabilities support") adds redundant code into the driver, since
there's no real reaon to maintain the extended capabilities of the
port, as they can be queried on demand (e.g the FDR10 capability).

This patch reverts commit 97285b78 and removes the check for
extended caps from the mlx4_ib driver port query flow.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The kernel IB stack uses one enumeration for IB speed, which wasn't
explicitly specified in the verbs header file.  Add that enum, and use
it all over the code.

The IB speed/width notation is also used by iWARP and IBoE HW drivers,
which use the convention of rate = speed * width to advertise their
port link rate.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

ConnectX devices have a limit on the number of mappings that can be
done on an FMR before having to call sync_tpt.  The current
mlx4_ib driver reports the limit correctly in max_map_per_fmr in
.query_device(), but mlx4_core doesn't check it when actually
allocating FMRs.

Add a max_fmr_maps field to struct mlx4_caps and enforce this maximum
value on FMR allocations.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For SRIOV, some Hypervisor commands can be executed directly (native = 1).
Others should go through the command wrapper flow (for tracking resource
usage, for example, or for changing some HCA configurations that slaves
need to be notified of).

This patch sets the groundwork for this capability -- adding the correct
value of "native" in each case.

Note that if SRIOV is not activated, this parameter has no effect.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Port mask now has additional state.
Port can be set as "none". In this case neither the mlx4_en or mlx4_ib
drivers take ownership of the port.
In multifunction mode there is an option to set the vfs as single ported devices.
(in single function mode, both physical ports belong to same function)
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit cfcde11c ("IB/mlx4: Use flow counters on IBoE ports") added
code that sets elements of counters[] to -1 if no counter is allocated,
but then goes ahead and passes every entry to mlx4_counter_free() on
shutdown.  This is a bad idea, especially if MLX4_DEV_CAP_FLAG_COUNTERS
isn't set so there isn't even an underlying bitmap to free from.
Tested-by: NSean Hefty <sean.hefty@intel.com>
Cc: <stable@kernel.org>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The IBoE port MTU is derived from the corresponding Ethernet netdevice
MTU, which can support jumbo frames of 9K, and hence surely supports
the max IB mtu of 4K.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Set the extended active speeds based on the hardware configuration.
Signed-off-by: NMarcel Apfelbaum <marcela@dev.mellanox.co.il>
Reviewed-by: NHal Rosenstock <hal@mellanox.com>

[ Move FDR-10 handling into ib_link_query_port().  - Roland ]
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Allow processes that share the same XRC domain to open an existing
shareable QP.  This permits those processes to receive events on the
shared QP and transfer ownership, so that any process may modify the
QP.  The latter allows the creating process to exit, while a remaining
process can still transition it for path migration purposes.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Support the creation of XRC INI and TGT QPs.  To handle the case where
a CQ or PD is not provided, we allocate them internally with the xrcd.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Allow the user to create XRC SRQs.  This patch is based on a patch
from Jack Morgenstrein <jackm@dev.mellanox.co.il>.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Support creating and destroying XRC domains.  Any sharing of the XRCD
is managed above the low-level driver.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Allocate flow counter per Ethernet/IBoE port, and attach this counter
to all the QPs created on that port.  Based on patch by Eli Cohen
<eli@mellanox.co.il>.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

IBoE doesn't use LIDs.  Use the GID change event to update the IB core
cache for addition/deletion of GIDs.
Signed-off-by: NEli Cohen <eli@mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The same packet steering mechanism would be used both for IB and Ethernet,
Both multicasts and unicasts.
This commit prepares the general infrastructure for this.
Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

HW revision is derived from device ID and rev id.
Signed-off-by: NEugenia Emantayev <eugenia@mellanox.co.il>
Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The newest device firmware stores IB vs. Ethernet protocol in two bits
in members_count field of multicast group table (0: Infiniband, 1:
Ethernet).  When changing the QP members count for a multicast group,
it important not to reset this information.  When calling multicast
attach first time, the protocol type should be specified.  In this
patch we always set it IB, but in the future we will handle Ethernet
too.  When looking for a QP, the protocol type shoud be checked too.
Signed-off-by: NAleksey Senin <alekseys@voltaire.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>