The members have been effectively unused since "Btrfs: rework qgroup
accounting" (fcebe456), there's no substitute for
assert_qgroups_uptodate so it's removed as well.
Reviewed-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: NElena Reshetova <elena.reshetova@intel.com>
Signed-off-by: NHans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NDavid Windsor <dwindsor@gmail.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Added but never used.
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

write_all_supers and write_ctree_super are almost equal, the parameter
'trans' is unused so we can drop it and have just one helper.
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The quota status used to be tracked as a variable, so the mutex was
needed (until "Btrfs: add a flags field to btrfs_fs_info" afcdd129).
Since the status is a bit modified atomically and we don't hold the
mutex beyond the check, we can drop it.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Once a qgroup limit is exceeded, it's impossible to restore normal
operation to the subvolume without modifying the limit or removing
the subvolume.  This is a surprising situation for many users used
to the typical workflow with quotas on other file systems where it's
possible to remove files until the used space is back under the limit.

When we go to unlink a file and start the transaction, we'll hit
the qgroup limit while trying to reserve space for the items we'll
modify while removing the file.  We discussed last month how best
to handle this situation and agreed that there is no perfect solution.
The best principle-of-least-surprise solution is to handle it similarly
to how we already handle ENOSPC when unlinking, which is to allow
the operation to succeed with the expectation that it will ultimately
release space under most circumstances.

This patch modifies the transaction start path to select whether to
honor the qgroups limits.  btrfs_start_transaction_fallback_global_rsv
is the only caller that skips enforcement.  The reservation and tracking
still happens normally -- it just skips the enforcement step.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Reviewed-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Currently btrfs_ino takes a struct inode and this causes a lot of
internal btrfs functions which consume this ino to take a VFS inode,
rather than btrfs' own struct btrfs_inode. In order to fix this "leak"
of VFS structs into the internals of btrfs first it's necessary to
eliminate all uses of struct inode for the purpose of inode. This patch
does that by using BTRFS_I to convert an inode to btrfs_inode. With
this problem eliminated subsequent patches will start eliminating the
passing of struct inode altogether, eventually resulting in a lot cleaner
code.
Signed-off-by: NNikolay Borisov <n.borisov.lkml@gmail.com>
[ fix btrfs_get_extent tracepoint prototype ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This replaces ACCESS_ONCE macro with the corresponding
READ|WRITE macros
Signed-off-by: NSeraphime Kirkovski <kirkseraph@gmail.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Now we only use the root parameter to print the root objectid in
a tracepoint.  We can use the root parameter from the transaction
handle for that.  It's also used to join the transaction with
async commits, so we remove the comment that it's just for checking.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

btrfs_write_and_wait_marked_extents and btrfs_sync_log both call
btrfs_wait_marked_extents, which provides a core loop and then handles
errors differently based on whether it's it's a log root or not.

This means that btrfs_write_and_wait_marked_extents needs to take a root
because btrfs_wait_marked_extents requires one, even though it's only
used to determine whether the root is a log root.  The log root code
won't ever call into the transaction commit code using a log root, so we
can factor out the core loop and provide the error handling appropriate
to each waiter in new routines.  This allows us to eventually remove
the root argument from btrfs_commit_transaction, and as a result,
btrfs_end_transaction.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

There are loads of functions in btrfs that accept a root parameter
but only use it to obtain an fs_info pointer.  Let's convert those to
just accept an fs_info pointer directly.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This results in btrfs_assert_delayed_root_empty and
btrfs_destroy_delayed_inode taking an fs_info instead of a root.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

In routines where someptr->fs_info is referenced multiple times, we
introduce a convenience variable.  This makes the code considerably
more readable.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We track the node sizes per-root, but they never vary from the values
in the superblock.  This patch messes with the 80-column style a bit,
but subsequent patches to factor out root->fs_info into a convenience
variable fix it up again.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

There are many functions that are always called with the same root
argument.  Rather than passing the same root every time, we can
pass an fs_info pointer instead and have the function get the root
pointer itself.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

There are 11 functions that accept a root parameter and immediately
overwrite it.  We can pass those an fs_info pointer instead.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

current_fs_time() uses struct super_block* as an argument.
As per Linus's suggestion, this is changed to take struct
inode* as a parameter instead. This is because the function
is primarily meant for vfs inode timestamps.
Also the function was renamed as per Arnd's suggestion.

Change all calls to current_fs_time() to use the new
current_time() function instead. current_fs_time() will be
deleted.
Signed-off-by: NDeepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

For many printks, we want to know which file system issued the message.

This patch converts most pr_* calls to use the btrfs_* versions instead.
In some cases, this means adding plumbing to allow call sites access to
an fs_info pointer.

fs/btrfs/check-integrity.c is left alone for another day.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This patch converts printk(KERN_* style messages to use the pr_* versions.

One side effect is that anything that was KERN_DEBUG is now automatically
a dynamic debug message.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

CodingStyle chapter 2:
"[...] never break user-visible strings such as printk messages,
because that breaks the ability to grep for them."

This patch unsplits user-visible strings.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Since we could get errors from the concurrent aborted transaction,
the check of this BUG_ON in start_transaction is not true any more.

Say, while flushing free space cache inode's dirty pages,
btrfs_finish_ordered_io
 -> btrfs_join_transaction_nolock
      (the transaction has been aborted.)
      -> BUG_ON(type == TRANS_JOIN_NOLOCK);
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We have a lot of random ints in btrfs_fs_info that can be put into flags.  This
is mostly equivalent with the exception of how we deal with quota going on or
off, now instead we set a flag when we are turning it on or off and deal with
that appropriately, rather than just having a pending state that the current
quota_enabled gets set to.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When running fstests generic/068, sometimes we got below deadlock:
  xfs_io          D ffff8800331dbb20     0  6697   6693 0x00000080
  ffff8800331dbb20 ffff88007acfc140 ffff880034d895c0 ffff8800331dc000
  ffff880032d243e8 fffffffeffffffff ffff880032d24400 0000000000000001
  ffff8800331dbb38 ffffffff816a9045 ffff880034d895c0 ffff8800331dbba8
  Call Trace:
  [<ffffffff816a9045>] schedule+0x35/0x80
  [<ffffffff816abab2>] rwsem_down_read_failed+0xf2/0x140
  [<ffffffff8118f5e1>] ? __filemap_fdatawrite_range+0xd1/0x100
  [<ffffffff8134f978>] call_rwsem_down_read_failed+0x18/0x30
  [<ffffffffa06631fc>] ? btrfs_alloc_block_rsv+0x2c/0xb0 [btrfs]
  [<ffffffff810d32b5>] percpu_down_read+0x35/0x50
  [<ffffffff81217dfc>] __sb_start_write+0x2c/0x40
  [<ffffffffa067f5d5>] start_transaction+0x2a5/0x4d0 [btrfs]
  [<ffffffffa067f857>] btrfs_join_transaction+0x17/0x20 [btrfs]
  [<ffffffffa068ba34>] btrfs_evict_inode+0x3c4/0x5d0 [btrfs]
  [<ffffffff81230a1a>] evict+0xba/0x1a0
  [<ffffffff812316b6>] iput+0x196/0x200
  [<ffffffffa06851d0>] btrfs_run_delayed_iputs+0x70/0xc0 [btrfs]
  [<ffffffffa067f1d8>] btrfs_commit_transaction+0x928/0xa80 [btrfs]
  [<ffffffffa0646df0>] btrfs_freeze+0x30/0x40 [btrfs]
  [<ffffffff81218040>] freeze_super+0xf0/0x190
  [<ffffffff81229275>] do_vfs_ioctl+0x4a5/0x5c0
  [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70
  [<ffffffff810038cf>] ? syscall_trace_enter_phase1+0x11f/0x140
  [<ffffffff81229409>] SyS_ioctl+0x79/0x90
  [<ffffffff81003c12>] do_syscall_64+0x62/0x110
  [<ffffffff816acbe1>] entry_SYSCALL64_slow_path+0x25/0x25

>From this warning, freeze_super() already holds SB_FREEZE_FS, but
btrfs_freeze() will call btrfs_commit_transaction() again, if
btrfs_commit_transaction() finds that it has delayed iputs to handle,
it'll start_transaction(), which will try to get SB_FREEZE_FS lock
again, then deadlock occurs.

The root cause is that in btrfs, sync_filesystem(sb) does not make
sure all metadata is updated. There still maybe some codes adding
delayed iputs, see below sample race window:

         CPU1                                  |         CPU2
|-> freeze_super()                             |
    |-> sync_filesystem(sb);                   |
    |                                          |-> cleaner_kthread()
    |                                          |   |-> btrfs_delete_unused_bgs()
    |                                          |       |-> btrfs_remove_chunk()
    |                                          |           |-> btrfs_remove_block_group()
    |                                          |               |-> btrfs_add_delayed_iput()
    |                                          |
    |-> sb->s_writers.frozen = SB_FREEZE_FS;   |
    |-> sb_wait_write(sb, SB_FREEZE_FS);       |
    |   acquire SB_FREEZE_FS lock.             |
    |                                          |
    |-> btrfs_freeze()                         |
        |-> btrfs_commit_transaction()         |
            |-> btrfs_run_delayed_iputs()      |
            |   will handle delayed iputs,     |
            |   that means start_transaction() |
            |   will be called, which will try |
            |   to get SB_FREEZE_FS lock.      |

To fix this issue, introduce a "int fs_frozen" to record internally whether
fs has been frozen. If fs has been frozen, we can not handle delayed iputs.
Signed-off-by: NWang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
[ add comment to btrfs_freeze ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>

__btrfs_abort_transaction doesn't use its root parameter except to
obtain an fs_info pointer.  We can obtain that from trans->root->fs_info
for now and from trans->fs_info in a later patch.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

btrfs_trans_handle->root is documented as for use for confirming
that the root passed in to start the transaction is the same as the
one ending it.  It's used in several places when an fs_info pointer
is needed, so let's just add an fs_info pointer directly.  Eventually,
the root pointer can be removed.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

btrfs_test_opt and friends only use the root pointer to access
the fs_info.  Let's pass the fs_info directly in preparation to
eliminate similar patterns all over btrfs.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Using the offwakecputime bpf script I noticed most of our time was spent waiting
on the delayed ref throttling.  This is what is supposed to happen, but
sometimes the transaction can commit and then we're waiting for throttling that
doesn't matter anymore.  So change this stuff to be a little smarter by tracking
the transid we were in when we initiated the throttling.  If the transaction we
get is different then we can just bail out.  This resulted in a 50% speedup in
my fs_mark test, and reduced the amount of time spent throttling by 60 seconds
over the entire run (which is about 30 minutes).  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

Introduced in 2c1984f2 ("btrfs: build fixup for
qgroup_account_snapshot") as temporary bisectability build fixup.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We've renamed btrfs_std_error, this one is left from last merge.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Before the relocation process of a block group starts, it sets the block
group to readonly mode, then flushes all delalloc writes and then finally
it waits for all ordered extents to complete. This last step includes
waiting for ordered extents destinated at extents allocated in other block
groups, making us waste unecessary time.

So improve this by waiting only for ordered extents that fall into the
block group's range.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>

The macro btrfs_std_error got renamed to btrfs_handle_fs_error in an
independent branch for the same merge target (4.7). To make the code
compilable for bisectability reasons, add a temporary stub.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Current btrfs qgroup design implies a requirement that after calling
btrfs_qgroup_account_extents() there must be a commit root switch.

Normally this is OK, as btrfs_qgroup_accounting_extents() is only called
inside btrfs_commit_transaction() just be commit_cowonly_roots().

However there is a exception at create_pending_snapshot(), which will
call btrfs_qgroup_account_extents() but no any commit root switch.

In case of creating a snapshot whose parent root is itself (create a
snapshot of fs tree), it will corrupt qgroup by the following trace:
(skipped unrelated data)
======
btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1
qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0
qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384
btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0
======

The problem here is in first qgroup_account_extent(), the
nr_new_roots of the extent is 1, which means its reference got
increased, and qgroup increased its rfer and excl.

But at second qgroup_account_extent(), its reference got decreased, but
between these two qgroup_account_extent(), there is no switch roots.
This leads to the same nr_old_roots, and this extent just got ignored by
qgroup, which means this extent is wrongly accounted.

Fix it by call commit_cowonly_roots() after qgroup_account_extent() in
create_pending_snapshot(), with needed preparation.

Mark: I added a check at the top of qgroup_account_snapshot() to skip this
code if qgroups are turned off. xfstest btrfs/122 exposes this problem.
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.de>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Single caller passes GFP_NOFS. We can get rid of the
gfpflags_allow_blocking checks as NOFS can block but does not recurse to
filesystem through reclaim.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

btrfs_std_error() handles errors, puts FS into readonly mode
(as of now). So its good idea to rename it to btrfs_handle_fs_error().
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
[ edit changelog ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

CURRENT_TIME macro is not appropriate for filesystems as it
doesn't use the right granularity for filesystem timestamps.
Use current_fs_time() instead.
Signed-off-by: NDeepa Dinamani <deepa.kernel@gmail.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: linux-btrfs@vger.kernel.org
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

There are a few places where we add to trans->bytes_reserved but don't have the
corresponding trace point.  With these added my tool no longer sees transaction
leaks.
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>