- 08 5月, 2008 14 次提交
-
-
由 Michael Buesch 提交于
This patch removes some dead code from the driver. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This patch distributes the Local Oscillator calibration bursts over time, so that calibration only happens when it's actually needed. Currently we periodically perform a recalibration of the whole table. The table is huge and this takes lots of time. Additionally only small bits of the table are actually needed at a given time. So instead of maintaining a huge table with all possible calibration values, we create dynamic calibration settings that a) We only calibrate when they are actually needed. b) Are cached for some time until they expire. So a recalibration might happen if we need a calibration setting that's not cached, or if the active calibration setting expires. Currently the expire timeout is set to 30 seconds. We may raise that in future. This patch reduces overall memory consumption by nuking the huge static calibration tables. This patch has been tested on several 4306, 4311 and 4318 flavours. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
The current code checks for the special signature that signifies a revision 4 SPROM. Now that a rev. 8 SPROM with a 440-byte length has been found that may not have any special code, this check could be relaxed. With this patch, if the CRC is incorrect for a 256-byte SPROM, the code will immediately check for a 440-byte SPROM. If there is still a CRC error, the size is set to 440 bytes, which allows dumping of most of any 512-byte SPROM if one is encountered. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ester Kummer 提交于
This patch corrects the allocation of skb in ADDBA req/resp and DELBA it removes redundant space u.addba_* are already counted in sizeof(*mgmt) Signed-off-by: NEster Kummer <ester.kummer@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This handler is universal for most of the HW Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch defines ANA_PLL values in iwl-csr.h Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ron Rindjunsky 提交于
This patch makes some renaming of the ampdu_action functions inside iwlwifi, and adds checks for correct station id in Rx flows Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
This patch fixes several issues in security: 1) the uCode doesn't know about TKIP-MMIC failure, if uCode set RX_RES_STATUS_BAD_ICV_MIC, it means ICV failure: drop the packet silently. 2) do not allocate room in the key table of the uCode is the set_key call is a replacement of an old key 3) check the keyidx of the key in the uCode before removing it upon disable_key call Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
This adds a new flag to the ieee80211_key_conf structure. This flag will inform the driver the key is pairwise rather then a shared key. This is important for drivers who support both types of keys, and need to be informed which type of key this is. Alternative would be drivers checking the address argument of set_key(), but it will be safer when mac80211 is more explicit. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This has some code cleanups (some inspired by checkpatch), I got bored at probably a third of the output though so if somebody else wants to... Signed-off-by: Johannes Berg <johannes@sipsolutions.net Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
The hw_key_idx inside the ieee80211_key_conf structure does not provide all the information drivers might need to perform hardware encryption. This is in particular true for rt2x00 who needs to know the key algorithm and whether it is a shared or pairwise key. By passing the ieee80211_key_conf pointer it assures us that drivers can make full use of all information that it should know about a particular key. Additionally this patch updates all drivers to grab the hw_key_idx from the ieee80211_key_conf structure. v2: Removed bogus u16 cast v3: Add warning about ieee80211_tx_control pointers v4: Update warning about ieee80211_tx_control pointers Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch cleans up semantic of set_pwr_src set_pwr_src is now part of apm handlers group in iwlcore Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch move iwl_find_station into iwl-sta.c file Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
This patch does several things: 1) rename CONFIG_IWL4965_SENSITIVITY to IWL4965_RUN_TIME_CALIB which is better semantic 2) move all the run time calibration to a new file: iwl-calib.c 3) simplify the sensitivity calibration flow and make it HW dependent 4) make the chain noise calibration flow HW dependent Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 05 5月, 2008 26 次提交
-
-
由 Allan Stephens 提交于
This patch updates TIPC's version number to 1.6.4. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch modifies TIPC to only exclude debug-related print buffer routines when debugging capabilities are not required. It also fixes up some related #defines that exceed 80 characters. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch contains changes to make TIPC's system & debug message declarations more readable. Declarations have been regrouped and recommented to make it easier to understand what output is generated in both standard and debugging modes. In addition, oversize lines have been fixed to respect the 80 character upper bound used in the kernel. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch contains changes to make TIPC's print buffer code conform more closely to Linux kernel coding guidelines. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch revamps TIPC's print buffer subsystem to eliminate support for arbitrary chains of print buffers, which were rarely needed and difficult to use safely. In its place, print buffers can now be configured to echo their output to the system console. This provides an equivalent for the only chaining currently utilized by TIPC, in a faster and more compact manner. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch eliminates an obsolete use of the DBG_OUTPUT print buffer which could lead to a null pointer crash in tipc_printf() if TIPC's debugging capabilities are configured. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch fixes two routines that allow the global print buffer spinlock to be taken recursively. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch provides feedback to the user when TIPC is unable to set its log buffer to the requested size. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch simplifies & standardizes the way TIPC's print buffer log is resized. Code to terminate use of the log buffer is eliminated by simply setting the log buffer size to 0 bytes. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-inttypes由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-inttypes: fix asm-mips/types.h syntax error fix asm-alpha/types.h breakage
-
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-fixes由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-fixes: x86: fix setup printk format warning x86: olpc build fix x86: video/fbdev.c: add MODULE_LICENSE x86: fix up bootparam.h for userspace inclusion x86: relocs ELF handling - use SELFMAG instead of numeric constant x86: vdso ELF handling - use SELFMAG instead of numeric constant x86: remove dell reboot dmi quirk board name match x86: es7000 build fix x86: make additional_cpus static x86: make start_secondary() static kbuild, suspend, x86: fix rebuild of wakeup.bin uml: fix gcc problem x86: undo visws/numaq build changes
-
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes: kconfig-language.txt: remove bogus hint kconfig: fix MAC OS X warnings in menuconfig modpost: i2c aliases need no trailing wildcard
-
由 Bryan Wu 提交于
CC fs/proc/task_nommu.o fs/proc/task_nommu.c: In function ‘task_mem’: fs/proc/task_nommu.c:55: error: dereferencing pointer to incomplete type make[2]: *** [fs/proc/task_nommu.o] Error 1 make[1]: *** [fs/proc] Error 2 make: *** [fs] Error 2 Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: IDE_HFLAG_SERIALIZE_DMA bugfix
-
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm由 Linus Torvalds 提交于
* 'kvm-updates-2.6.26' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: x86: KVM geust: make setup_secondary_clock definition dependent on local apic KVM: MMU: Allow more than PAGES_PER_HPAGE write protections per large page KVM: avoid fx_init() schedule in atomic KVM: Avoid spurious execeptions after setting registers KVM: PIT: support mode 4 KVM: x86 emulator: disable writeback on lmsw KVM: ppc: deliver INTERRUPT_FP_UNAVAIL to the guest KVM: ppc: Handle guest idle by emulating MSR[WE] writes KVM: x86: task switch: fix wrong bit setting for the busy flag KVM: VMX: Enable EPT feature for KVM KVM: VMX: Prepare an identity page table for EPT in real mode KVM: Export necessary function for EPT KVM: MMU: Remove #ifdef CONFIG_X86_64 to support 4 level EPT KVM: MMU: Add EPT support KVM: Add kvm_x86_ops get_tdp_level() KVM: MMU: Move some definitions to a header file KVM: VMX: EPT Feature Detection
-
由 Ingo Molnar 提交于
x86.git testing found the following build failure on v2.6.26-rc1: In file included from include/linux/kobject.h:22, from include/linux/module.h:17, from include/linux/crypto.h:22, from arch/x86/kernel/asm-offsets_32.c:8, from arch/x86/kernel/asm-offsets.c:3: include/linux/sysfs.h:201: error: redefinition of 'sysfs_update_group' include/linux/sysfs.h:195: error: previous definition of 'sysfs_update_group' was here make[1]: *** [arch/x86/kernel/asm-offsets.s] Error 1 make: *** [prepare0] Error 2 with the following config: http://redhat.com/~mingo/misc/config-Sun_May__4_07_09_30_CEST_2008.bad the reason for the build failure is the duplicate definition of the sysfs_update_group() inline function in include/linux/sysfs.h. The duplication was a merge error: it was added via -mm by commit v2.6.25-7262-g2850699c, "sysfs: sysfs_update_group stub for CONFIG_SYSFS=n" a day before v2.6.26-rc1, but a day before that the same commit was already merged upstream via the sysfs tree, with commit v2.6.25-7211-g1cbfb7a5. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
The kernel module loader used to be much too happy to allow loading of modules for the wrong kernel version by default. For example, if you had MODVERSIONS enabled, but tried to load a module with no version info, it would happily load it and taint the kernel - whether it was likely to actually work or not! Generally, such forced module loading should be considered a really really bad idea, so make it conditional on a new config option (MODULE_FORCE_LOAD), and make it default to off. If somebody really wants to force module loads, that's their problem, but we should not encourage it. Especially as it happened to me by mistake (ie regular unversioned Fedora modules getting loaded) causing lots of strange behavior. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Adrian Bunk 提交于
This patch fixes the following compile error caused by commit 23cf11dd (mips: types: use <asm-generic/int-*.h> for the mips architecture): <-- snip --> ... CC kernel/bounds.s In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/types.h:12, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/page-flags.h:8, from /home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/bounds.c:9: include2/asm/types.h:56:2: error: #endif without #if make[2]: *** [kernel/bounds.s] Error 1 <-- snip --> Signed-off-by: NAdrian Bunk <bunk@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Adrian Bunk 提交于
This patch fixes the following compile error on alpha caused by commit 3726c23d (alpha: types: use <asm-generic/int-*.h> for the alpha architecture): <-- snip --> ... CC arch/alpha/kernel/asm-offsets.s In file included from include2/asm/topology.h:6, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/topology.h:34, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/mmzone.h:683, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/gfp.h:4, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/slab.h:12, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/percpu.h:5, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/rcupdate.h:39, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/pid.h:4, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/sched.h:74, from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/alpha/kernel/asm-offsets.c:9: include2/asm/machvec.h:44: error: expected declaration specifiers or '...' before 'dma_addr_t' include2/asm/machvec.h:44: error: expected declaration specifiers or '...' before 'dma_addr_t' In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/alpha/kernel/asm-offsets.c:12: include2/asm/io.h:94: warning: type defaults to 'int' in declaration of 'dma_addr_t' include2/asm/io.h:94: warning: variable 'dma_addr_t' declared 'inline' include2/asm/io.h:94: error: expected ',' or ';' before 'isa_page_to_bus' make[2]: *** [arch/alpha/kernel/asm-offsets.s] Error 1 <-- snip --> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Adrian Bunk 提交于
For the use case the hint describe a simple dependency is enough. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
-
由 Sam Ravnborg 提交于
Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Acked-by: NTimur Tabi <timur@freescale.com>
-
由 Randy Dunlap 提交于
Fix x86 setup printk format warming: next-20080430/arch/x86/kernel/setup.c:172: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'ssize_t' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Cc: mingo@elte.hu Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
CONFIG_OLPC needs to depend on MGEODE_LX Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Adrian Bunk 提交于
Add the missing MODULE_LICENSE("GPL"). Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Rusty Russell 提交于
commit 8b664aa6 (x86, boot: add linked list of struct setup_data) put a new struct in bootparam.h, but didn't use the userspace-safe types. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Huang Ying <ying.huang@intel.com> Acked-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Cyrill Gorcunov 提交于
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Cc: akpm@linux-foundation.org Cc: hpa@zytor.com Cc: mingo@elte.hu Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-