- 24 10月, 2010 40 次提交
-
-
由 Joerg Roedel 提交于
This is necessary to implement Nested Nested Paging. As a side effect this allows some cleanups in the SVM nested paging code. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch changes the tdp_enabled flag from its global meaning to the mmu-context and renames it to direct_map there. This is necessary for Nested SVM with emulation of Nested Paging where we need an extra MMU context to shadow the Nested Nested Page Table. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
The walk_addr function checks for !is_long_mode in its 64 bit version. But what is meant here is a check for pae paging. Change the condition to really check for pae paging so that it also works with nested nested paging. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Jes Sorensen 提交于
Some operating systems store data about the host processor at the time of installation, and when booted on a more uptodate cpu tries to read MSR_EBC_FREQUENCY_ID. This has been found with XP. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Reviewed-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Jes Sorensen 提交于
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Roedel, Joerg 提交于
This patch changes the rip handling in the vmrun emulation path from using next_rip to the generic kvm register access functions. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Joerg Roedel 提交于
This patch implements restoring of the correct rip, rsp, and rax after the svm emulation in KVM injected a selective_cr0 write intercept into the guest hypervisor. The problem was that the vmexit is emulated in the instruction emulation which later commits the registers right after the write-cr0 instruction. So the l1 guest will continue to run with the l2 rip, rsp and rax resulting in unpredictable behavior. This patch is not the final word, it is just an easy patch to fix the issue. The real fix will be done when the instruction emulator is made aware of nested virtualization. Until this is done this patch fixes the issue and provides an easy way to fix this in -stable too. Cc: stable@kernel.org Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Joerg Roedel 提交于
This patch fixes 32 bit legacy paging with NPT enabled. The mmu_check_root call on the top-level of the loop causes root_gfn to take values (in the tdp_enabled path) which are outside of guest memory. So the mmu_check_root call fails at some point in the loop interation causing the guest to tiple-fault. This patch changes the mmu_check_root calls to the places where they are really necessary. As a side-effect it introduces a check for the root of a pae page table too. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Alexander Graf 提交于
We have to protect the include for linux/of.h by __KERNEL__ so it doesn't accidently get referenced outside. This patch fixes this and makes the tree compile again. Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
This documents how to detect additional features inside the magic page when a guest maps it. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
The e500_tlb.c file didn't compile for me due to the following error: arch/powerpc/kvm/e500_tlb.c: In function ‘kvmppc_e500_shadow_map’: arch/powerpc/kvm/e500_tlb.c:300: error: format ‘%lx’ expects type ‘long unsigned int’, but argument 2 has type ‘gfn_t’ So let's explicitly cast the argument to make printk happy. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Kyle Moffett 提交于
The kvmppc_e500_stlbe_invalidate() function was trying to pass too many parameters to trace_kvm_stlb_inval(). This appears to be a bad copy-paste from a call to trace_kvm_stlb_write(). Signed-off-by: NKyle Moffett <Kyle.D.Moffett@boeing.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
This adds some documentation for the KVM_INTERRUPT special cases that PowerPC now implements. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
BookE also wants to support level based interrupts, so let's implement all the necessary logic there. We need to trick a bit here because the irqprios are 1:1 assigned to architecture defined values. But since there is some space left there, we can just pick a random one and move it later on - it's internal anyways. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
Now that we have all the level interrupt magic in place, let's expose the capability to user space, so it can make use of it! Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
The current interrupt logic is just completely broken. We get a notification from user space, telling us that an interrupt is there. But then user space expects us that we just acknowledge an interrupt once we deliver it to the guest. This is not how real hardware works though. On real hardware, the interrupt controller pulls the external interrupt line until it gets notified that the interrupt was received. So in reality we have two events: pulling and letting go of the interrupt line. To maintain backwards compatibility, I added a new request for the pulling part. The letting go part was implemented earlier already. With this in place, we can now finally start guests that do not randomly stall and stop to work at random times. This patch implements above logic for Book3S. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
Before I incorrectly enabled napping also for BookE, which would result in needless dcache flushes. Since we only need to force enable napping on Book3s_64 because it doesn't go into MSR_POW otherwise, we can just #ifdef that code to this particular platform. Reported-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Hollis Blanchard 提交于
Match only the first part of cur_cpu_spec->platform. 440GP (the first 440 processor) is identified by the string "ppc440gp", while all later 440 processors use simply "ppc440". Signed-off-by: NHollis Blanchard <hollis_blanchard@mentor.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Hollis Blanchard 提交于
Missing local variable. Signed-off-by: NHollis Blanchard <hollis_blanchard@mentor.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Hollis Blanchard 提交于
Developers can now tell at a glace the exact type of the premature interrupt, instead of just knowing that there was some premature interrupt. Signed-off-by: NHollis Blanchard <hollis_blanchard@mentor.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
On Book3S a mtmsr with the MSR_POW bit set indicates that the OS is in idle and only needs to be waked up on the next interrupt. Now, unfortunately we let that bit slip into the stored MSR value which is not what the real CPU does, so that we ended up executing code like this: r = mfmsr(); /* r containts MSR_POW */ mtmsr(r | MSR_EE); This obviously breaks, as we're going into idle mode in code sections that don't expect to be idling. This patch masks MSR_POW out of the stored MSR value on wakeup, making guests happy again. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
Up until now we were doing segment mappings wrong on Book3s_32. For Book3s_64 we were using a trick where we know that a single mmu_context gives us 16 bits of context ids. The mm system on Book3s_32 instead uses a clever algorithm to distribute VSIDs across the available range, so a context id really only gives us 16 available VSIDs. To keep at least a few guest processes in the SID shadow, let's map a number of contexts that we can use as VSID pool. This makes the code be actually correct and shouldn't hurt performance too much. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
There are some heuristics in the PPC power management code that try to find out if the particular hardware we're running on supports proper power management or just hangs the machine when going into nap mode. Since we know that KVM is safe with nap, let's force enable it in the PV code once we're certain that we are on a KVM VM. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
We had an arbitrary limitation in mtmsrd L=1 that kept us from using r30 and r31 as input registers. Let's get rid of that and get more potential speedups! Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
When having a decrementor interrupt pending, the dequeuing happens manually through an mtdec instruction. This instruction simply calls dequeue on that interrupt, so the int_pending hint doesn't get updated. This patch enables updating the int_pending hint also on dequeue, thus correctly enabling guests to stay in guest contexts more often. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
So far we've been restricting ourselves to r0-r29 as registers an mtmsr instruction could use. This was bad, as there are some code paths in Linux actually using r30. So let's instead handle all registers gracefully and get rid of that stupid limitation Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
This is the guest side of the mtsr acceleration. Using this a guest can now call mtsrin with almost no overhead as long as it ensures that it only uses it with (MSR_IR|MSR_DR) == 0. Linux does that, so we're good. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
Now that the actual mtsr doesn't do anything anymore, we can move the sr contents over to the shared page, so a guest can directly read and write its sr contents from guest context. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
Right now we're examining the contents of Book3s_32's segment registers when the register is written and put the interpreted contents into a struct. There are two reasons this is bad. For starters, the struct has worse real-time performance, as it occupies more ram. But the more important part is that with segment registers being interpreted from their raw values, we can put them in the shared page, allowing guests to mess with them directly. This patch makes the internal representation of SRs be u32s. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
The current approach duplicates the spr->bat finding logic and makes it harder to reuse the actually used variables. So let's move everything down to the spr handler. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
We will soon add SR PV support to the shared page, so we need some infrastructure that allows the guest to query for features KVM exports. This patch adds a second return value to the magic mapping that indicated to the guest which features are available. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
The define VSID_ALL is unused. Let's remove it. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
It turns out the in-kernel hash function is sub-optimal for our subtle hash inputs where every bit is significant. So let's revert to the original hash functions. This reverts commit 05340ab4f9a6626f7a2e8f9fe5397c61d494f445. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
This patch moves debugging printks for shadow SLB debugging over to tracepoints. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
There is a race condition in the pte invalidation code path where we can't be sure if a pte was invalidated already. So let's move the spin lock around to get rid of the race. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
When hitting a no-execute or read-only data/inst storage interrupt we were flushing the respective PTE so we're sure it gets properly overwritten next. According to the spec, this is unnecessary though. The guest issues a tlbie anyways, so we're safe to just keep the PTE around and have it manually removed from the guest, saving us a flush. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
When the guest jumps into kernel mode and has the magic page mapped, theres a very high chance that it will also use it. So let's detect that scenario and map the segment accordingly. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
The different ways of flusing shadow ptes have their own debug prints which use stupid old printk. Let's move them to tracepoints, making them easier available, faster and possible to activate on demand Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
After a flush the sid map contained lots of entries with 0 for their gvsid and hvsid value. Unfortunately, 0 can be a real value the guest searches for when looking up a vsid so it would incorrectly find the host's 0 hvsid mapping which doesn't belong to our sid space. So let's also check for the valid bit that indicated that the sid we're looking at actually contains useful data. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
This patch moves the SPTE flush debug printk over to tracepoints. Signed-off-by: NAlexander Graf <agraf@suse.de>
-