The integrated PHY in 2.5Gbps chip RTL8125 is the first (known to me)
PHY that uses standard Clause 22 for all modes up to 1Gbps and adds
2.5Gbps control using vendor-specific registers. To use phylib for
the standard part little extensions are needed:
- Move most of genphy_config_aneg to a new function
  __genphy_config_aneg that takes a parameter whether restarting
  auto-negotiation is needed (depending on whether content of
  vendor-specific advertisement register changed).
- Don't clear phydev->lp_advertising in genphy_read_status so that
  we can set non-C22 mode flags before.

Basically both changes mimic the behavior of the equivalent Clause 45
functions.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Using linkmode_adv_to_mii_adv_t and linkmode_adv_to_mii_ctrl1000_t
allows to simplify the code. In addition avoiding the conversion to
the legacy u32 advertisement format allows to remove the warning.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Suggested-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Register couple of devlink params, one generic, one driver-specific.
Make the values available over debugfs.

Example:
$ echo "111" > /sys/bus/netdevsim/new_device
$ devlink dev param
netdevsim/netdevsim111:
  name max_macs type generic
    values:
      cmode driverinit value 32
  name test1 type driver-specific
    values:
      cmode driverinit value true
$ cat /sys/kernel/debug/netdevsim/netdevsim111/max_macs
32
$ cat /sys/kernel/debug/netdevsim/netdevsim111/test1
Y
$ devlink dev param set netdevsim/netdevsim111 name max_macs cmode driverinit value 16
$ devlink dev param set netdevsim/netdevsim111 name test1 cmode driverinit value false
$ devlink dev reload netdevsim/netdevsim111
$ cat /sys/kernel/debug/netdevsim/netdevsim111/max_macs
16
$ cat /sys/kernel/debug/netdevsim/netdevsim111/test1
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: Alexander Aring <alex.aring@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Harry Morris <h.morris@cascoda.com>
Cc: linux-wpan@vger.kernel.org
Cc: netdev@vger.kernel.org
Acked-by: NStefan Schmidt <stefan@datenfreihafen.org>
Acked-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Maxime Chevallier <maxime.chevallier@bootlin.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Huckleberry <nhuck@google.com>
Cc: netdev@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: Mirko Lindner <mlindner@marvell.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Michael Heimpold <michael.heimpold@i2se.com>
Cc: Yangtao Li <tiny.windzz@gmail.com>
Cc: netdev@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Because we don't care about the individual files, we can remove the
stored dentry for the files, as they are not needed to be kept track of
at all.

Cc: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Because we don't care about the individual files, we can remove the
stored dentry for the files, as they are not needed to be kept track of
at all.

Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Edwin Peer <edwin.peer@netronome.com>
Cc: Yangtao Li <tiny.windzz@gmail.com>
Cc: Simon Horman <simon.horman@netronome.com>
Cc: oss-drivers@netronome.com
Cc: netdev@vger.kernel.org
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Cc: Salil Mehta <salil.mehta@huawei.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

If a debugfs call fails, it will properly warn in the syslog, there's no
need for all individual drivers to also print a message, so that is one
more reason to not care about checking the return values.

Cc: Vishal Kulkarni <vishal@chelsio.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Casey Leedom <leedom@chelsio.com>
Cc: netdev@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

This cleans up a lot of unneeded code and logic around the debugfs
files, making all of this much simpler and easier to understand.

Cc: Michael Chan <michael.chan@broadcom.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

This cleans up a lot of unneeded code and logic around the debugfs
files, making all of this much simpler and easier to understand.

Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

This cleans up a lot of unneeded code and logic around the debugfs
files, making all of this much simpler and easier to understand as we
don't need to keep the dentries saved anymore.

Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The debugfs core now will print a message if this function fails, so
don't duplicate that logic.  Also, no need to change the code logic if
the call fails either, as no debugfs calls should interrupt normal
kernel code for any reason.

Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

This cleans up a lot of unneeded code and logic around the debugfs wimax
files, making all of this much simpler and easier to understand.

Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Cc: linux-wimax@intel.com
Cc: netdev@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

refcount_t is better for reference counters since its
implementation can prevent overflows.
So convert atomic_t ref counters to refcount_t.
Signed-off-by: NChuhong Yuan <hslester96@gmail.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

It is desired to use unique port indices when multiple pci devices'
devlink instance have the same switch-id.

Make use of vhca-id to generate such unique devlink port indices.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

System image GUID doesn't depend on eswitch switchdev mode.

Hence, remove the check which simplifies the code.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NVu Pham <vuhuong@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Currently mlx5_eswitch_rep stores same hw ID for all representors.
However it is never used from this structure.
It is always used from mlx5_vport.

Hence, remove unused field.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NVu Pham <vuhuong@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Encap entries creation is fully synchronized by encap_tbl_lock. In order to
allow concurrent allocation of hardware resources used to offload
encapsulation, extend mlx5e_encap_entry with 'res_ready' completion. Move
call to mlx5e_tc_tun_create_header_ipv{4|6}() out of encap_tbl_lock
critical section. Modify code that attaches new flows to existing encap to
wait for 'res_ready' completion before using the entry. Insert encap entry
to table before provisioning it to hardware and modify all users of the
encap table to verify that encap was fully initialized by checking
completion result for non-zero value (and to wait for 'res_ready'
completion, if necessary).
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

To remove dependency on rtnl lock, protect encap hash table from concurrent
modifications with new "encap_tbl_lock" mutex. Use the mutex to protect
internal encap entry state from concurrent modification. This is necessary
because a flow can be attached to multiple encap entries simultaneously,
which significantly complicates using finer grained per-entry lock.
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

List of flows attached to encap entry is used as implicit reference
counter (encap entry is deallocated when list becomes free) and as a
mechanism to obtain encap entry that flow is attached to (through list
head). This is not safe when concurrent modification of list of flows
attached to encap entry is possible. Proper atomic reference counter is
required to support concurrent access.

As a preparation for extending encap with reference counting, extract code
that lookups and deletes encap entry into standalone put/get helpers. In
order to remove this dependency on external locking, extend encap entry
with reference counter to manage its lifetime and extend flow structure
with direct pointer to encap entry that flow is attached to.
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Reviewed-by: NJianbo Liu <jianbol@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Mod_hdr entries creation is fully synchronized by mod_hdr_tbl->lock. In
order to allow concurrent allocation of hardware resources used to offload
header rewrite, extend mlx5e_mod_hdr_entry with 'res_ready' completion.
Move call to mlx5_modify_header_alloc() out of mod_hdr_tbl->lock critical
section. Modify code that attaches new flows to existing mh to wait for
'res_ready' completion before using the entry. Insert mh to mod_hdr table
before provisioning it to hardware and modify all users of mod_hdr table to
verify that mh was fully initialized by checking completion result for
negative value (and to wait for 'res_ready' completion, if necessary).
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

To remove dependency on rtnl lock, protect mod_hdr hash table from
concurrent modifications with new mutex.

Implement helper function to get flow namespace to prevent code
duplication.
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

To remove dependency on rtnl lock, extend mod header entry with spinlock
and use it to protect list of flows attached to mod header entry from
concurrent modifications.
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Reviewed-by: NJianbo Liu <jianbol@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

List of flows attached to mod header entry is used as implicit reference
counter (mod header entry is deallocated when list becomes free) and as a
mechanism to obtain mod header entry that flow is attached to (through list
head). This is not safe when concurrent modification of list of flows
attached to mod header entry is possible. Proper atomic reference counter
is required to support concurrent access.

As a preparation for extending mod header with reference counting, extract
code that lookups and deletes mod header entry into standalone put/get
helpers. In order to remove this dependency on external locking, extend mod
header entry with reference counter to manage its lifetime and extend flow
structure with direct pointer to mod header entry that flow is attached to.

To remove code duplication between legacy and switchdev mode
implementations that both support mod_hdr functionality, store mod_hdr
table in dedicated structure used by both fdb and kernel namespaces. New
table structure is extended with table lock by one of the following patches
in this series. Implement helper function to get correct mod_hdr table
depending on flow namespace.
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Reviewed-by: NJianbo Liu <jianbol@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Hairpin entries creation is fully synchronized by hairpin_tbl_lock. In
order to allow concurrent initialization of mlx5e_hairpin structure
instances and provisioning of hairpin entries to hardware, extend
mlx5e_hairpin_entry with 'res_ready' completion. Move call to
mlx5e_hairpin_create() out of hairpin_tbl_lock critical section. Modify
code that attaches new flows to existing hpe to wait for 'res_ready'
completion before using the hpe. Insert hpe to hairpin table before
provisioning it to hardware and modify all users of hairpin table to verify
that hpe was fully initialized by checking hpe->hp pointer (and to wait for
'res_ready' completion, if necessary).

Modify dead peer update event handling function to save hpe's to temporary
list with their reference counter incremented. Wait for completion of hpe's
in temporary list and update their 'peer_gone' flag outside of
hairpin_tbl_lock critical section.
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

To remove dependency on rtnl lock, protect hairpin hash table from
concurrent modifications with new "hairpin_tbl_lock" mutex.
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

To remove dependency on rtnl lock, extend hairpin entry with spinlock and
use it to protect list of flows attached to hairpin entry from concurrent
modifications.
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Reviewed-by: NJianbo Liu <jianbol@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

List of flows attached to hairpin entry is used as implicit reference
counter (hairpin entry is deallocated when list becomes free) and as a
mechanism to obtain hairpin entry that flow is attached to (through list
head). This is not safe when concurrent modification of list of flows
attached to hairpin entry is possible. Proper atomic reference counter is
required to support concurrent access.

As a preparation for extending hairpin with reference counting, extract
code that deletes hairpin entry into standalone function. In order to
remove this dependency on external locking, extend hairpin entry with
reference counter to manage its lifetime and extend flow structure with
direct pointer to hairpin entry that flow is attached to.
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Reviewed-by: NJianbo Liu <jianbol@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Macro arguments should be enclosed in parentheses, in case of
expression argument, but parentheses of pure number in macro
definition should be removed for simplicity.
Signed-off-by: NGuojia Liao <liaoguojia@huawei.com>
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Before PF asserting function reset, it should make sure
that all its VFs have been ready, otherwise, it will cause
some hardware errors.

So this patch adds function hclge_func_reset_sync_vf() to
synchronize VF before asserting PF function reset. For new
firmware which supports command HCLGE_OPC_QUERY_VF_RST_RDY,
we will try to query VFs' ready status within 30 seconds.
And keep the old implementation for compatible with firmware
which does not support this command.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Reviewed-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch refines the interface for querying MAC pause
statistics, and adds structure hns3_mac_stats to keep the
count of TX & RX.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Reviewed-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds a new function hclge_ncl_config_data_print()
to print the data of NCL_CONFIG, to make the code more
readable. Also, using macro replaces some magic number.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Reviewed-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hardware supports up to 8 TX BD for non-TSO skb and 63 TX
BD for TSO skb. Currently hns3 driver does not check the max
BD num that required by a skb before filling desc, which may
cause the hardware to issue a RAS error throug PCIe AER.

This patch adds the max BD num check before filling desc,
if the bd num is not within the hardware limit, it will
record the error by ring->stats.sw_err_cnt counter and
free the skb.

This patch also cleans up the hns3_nic_bd_num function by
changing the return type and removing an unnecessary check.
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>