- 09 11月, 2012 1 次提交
-
-
由 Kautuk Consul 提交于
Commit d065bd81 (mm: retry page fault when blocking on disk transfer) and commit 37b23e05 (x86,mm: make pagefault killable) The above commits introduced changes into the x86 pagefault handler for making the page fault handler retryable as well as killable. These changes reduce the mmap_sem hold time, which is crucial during OOM killer invocation. Port these changes to unicore32. Signed-off-by: NKautuk Consul <consul.kautuk@gmail.com> Acked-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
-
- 07 11月, 2012 14 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes由 Linus Torvalds 提交于
Pull gfs2 fixes from Steven Whitehouse: "Here are a number of GFS2 bug fixes. There are three from Andy Price which fix various issues spotted by automated code analysis. There are two from Lukas Czerner fixing my mistaken assumptions as to how FITRIM should work. Finally Ben Marzinski has fixed a bug relating to mmap and atime and also a bug relating to a locking issue in the transaction code." * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes: GFS2: Test bufdata with buffer locked and gfs2_log_lock held GFS2: Don't call file_accessed() with a shared glock GFS2: Fix FITRIM argument handling GFS2: Require user to provide argument for FITRIM GFS2: Clean up some unused assignments GFS2: Fix possible null pointer deref in gfs2_rs_alloc GFS2: Fix an unchecked error from gfs2_rs_alloc
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging由 Linus Torvalds 提交于
Pull hwmon fixes from Jean Delvare. * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: Fix chip feature table headers hwmon: (w83627ehf) Force initial bank selection
-
由 Benjamin Marzinski 提交于
In gfs2_trans_add_bh(), gfs2 was testing if a there was a bd attached to the buffer without having the gfs2_log_lock held. It was then assuming it would stay attached for the rest of the function. However, without either the log lock being held of the buffer locked, __gfs2_ail_flush() could detach bd at any time. This patch moves the locking before the test. If there isn't a bd already attached, gfs2 can safely allocate one and attach it before locking. There is no way that the newly allocated bd could be on the ail list, and thus no way for __gfs2_ail_flush() to detach it. Signed-off-by: NBenjamin Marzinski <bmarzins@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Benjamin Marzinski 提交于
file_accessed() was being called by gfs2_mmap() with a shared glock. If it needed to update the atime, it was crashing because it dirtied the inode in gfs2_dirty_inode() without holding an exclusive lock. gfs2_dirty_inode() checked if the caller was already holding a glock, but it didn't make sure that the glock was in the exclusive state. Now, instead of calling file_accessed() while holding the shared lock in gfs2_mmap(), file_accessed() is called after grabbing and releasing the glock to update the inode. If file_accessed() needs to update the atime, it will grab an exclusive lock in gfs2_dirty_inode(). gfs2_dirty_inode() now also checks to make sure that if the calling process has already locked the glock, it has an exclusive lock. Signed-off-by: NBenjamin Marzinski <bmarzins@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Lukas Czerner 提交于
Currently implementation in gfs2 uses FITRIM arguments as it were in file system blocks units which is wrong. The FITRIM arguments (fstrim_range.start, fstrim_range.len and fstrim_range.minlen) are actually in bytes. Moreover, check for start argument beyond the end of file system, len argument being smaller than file system block and minlen argument being bigger than biggest resource group were missing. This commit converts the code to convert FITRIM argument to file system blocks and also adds appropriate checks mentioned above. All the problems were recognised by xfstests 251 and 260. Signed-off-by: NLukas Czerner <lczerner@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Lukas Czerner 提交于
When the fstrim_range argument is not provided by user in FITRIM ioctl we should just return EFAULT and not promoting bad behaviour by filling the structure in kernel. Let the user deal with it. Signed-off-by: NLukas Czerner <lczerner@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Andrew Price 提交于
Cleans up two cases where variables were assigned values but then never used again. Signed-off-by: NAndrew Price <anprice@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Andrew Price 提交于
Despite the return value from kmem_cache_zalloc() being checked, the error wasn't being returned until after a possible null pointer dereference. This patch returns the error immediately, allowing the removal of the error variable. Signed-off-by: NAndrew Price <anprice@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Andrew Price 提交于
Check the return value of gfs2_rs_alloc(ip) and avoid a possible null pointer dereference. Signed-off-by: NAndrew Price <anprice@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "A single radeon typo fix for a regressions and two fixes for a regression in the open helper address space stuff." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: fix typo in evergreen_mc_resume() drm: set dev_mapping before calling drm_open_helper drm: restore open_count if drm_setup fails
-
git://git.linaro.org/people/rmk/linux-arm由 Linus Torvalds 提交于
Pull arm fixes from Russell King: "Not much here again. The two most notable things here are the sched_clock() fix, which was causing problems with the scheduling of threaded IRQs after a suspend event, and the vfp fix, which afaik has only been seen on some older OMAP boards. Nevertheless, both are fairly important fixes." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7569/1: mm: uninitialized warning corrections ARM: 7567/1: io: avoid GCC's offsettable addressing modes for halfword accesses ARM: 7566/1: vfp: fix save and restore when running on pre-VFPv3 and CONFIG_VFPv3 set ARM: 7565/1: sched: stop sched_clock() during suspend
-
由 Alex Deucher 提交于
Add missing index that may have led us to enabling more crtcs than necessary. May also fix: https://bugs.freedesktop.org/show_bug.cgi?id=56139Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Ilija Hadzic 提交于
Some drivers (specifically vmwgfx) look at dev_mapping in their open hook, so we have to set dev->dev_mapping earlier in the process. Reference: http://lists.freedesktop.org/archives/dri-devel/2012-October/029420.htmlSigned-off-by: NIlija Hadzic <ihadzic@research.bell-labs.com> Reported-by: NThomas Hellstrom <thellstrom@vmware.com> Cc: stable@vger.kernel.org Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Ilija Hadzic 提交于
If drm_setup (called at first open) fails, the whole open call has failed, so we should not keep the open_count incremented. Signed-off-by: NIlija Hadzic <ihadzic@research.bell-labs.com> Cc: stable@vger.kernel.org Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 06 11月, 2012 2 次提交
-
-
由 Jean Delvare 提交于
These got broken by recent patches fixing checkpatch warnings in these drivers. The trick is that the patches themselves looked good, but the source files after applying them do not. That's why I am not a big fan of using tabs inside comments. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Jean Delvare 提交于
Don't assume bank 0 is selected at device probe time. This may not be the case. Force bank selection at first register access to guarantee that we read the right registers upon driver loading. Signed-off-by: NJean Delvare <khali@linux-fr.org> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org
-
- 05 11月, 2012 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 04 11月, 2012 5 次提交
-
-
由 viresh kumar 提交于
The variables here are really not used uninitialized. arch/arm/mm/alignment.c: In function 'do_alignment': arch/arm/mm/alignment.c:327:15: warning: 'offset.un' may be used uninitialized in this function [-Wmaybe-uninitialized] arch/arm/mm/alignment.c:748:21: note: 'offset.un' was declared here Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull NFS client bugfixes from Trond Myklebust: - Fix a bunch of deadlock situations: * State recovery can deadlock if we fail to release sequence ids before scheduling the recovery thread. * Calling deactivate_super() from an RPC workqueue thread can deadlock because of the call to rpc_shutdown_client. - Display the device name correctly in /proc/*/mounts - Fix a number of incorrect error return values: * When NFSv3 mounts fail due to a timeout. * On NFSv4.1 backchannel setup failure * On NFSv4 open access checks - pnfs_find_alloc_layout() must check the layout pointer for NULL - Fix a regression in the legacy DNS resolved * tag 'nfs-for-3.7-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS4: nfs4_opendata_access should return errno NFSv4: Initialise the NFSv4.1 slot table highest_used_slotid correctly SUNRPC: return proper errno from backchannel_rqst NFS: add nfs_sb_deactive_async to avoid deadlock nfs: Show original device name verbatim in /proc/*/mount{s,info} nfsv3: Make v3 mounts fail with ETIMEDOUTs instead EIO on mountd timeouts nfs: Check whether a layout pointer is NULL before free it NFS: fix bug in legacy DNS resolver. NFSv4: nfs4_locku_done must release the sequence id NFSv4.1: We must release the sequence id when we fail to get a session slot NFS: Wait for session recovery to finish before returning
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux由 Linus Torvalds 提交于
Pull thermal management & ACPI update from Zhang Rui, Ho humm. Normally these things go through Len. But it's just three small fixes, I guess I can pull directly too. * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: exynos4_tmu_driver_ids should be exynos_tmu_driver_ids. ACPI video: Ignore errors after _DOD evaluation. thermal: solve compilation errors in rcar_thermal
-
git://git.pengutronix.de/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c embedded fixes from Wolfram Sang: "Two patches are usual stuff. The bigger patch is needed to correct a wrong decision made in this merge window. We hoped to get the PIOQUEUE mode in the mxs driver working with DMA, but it turned out to be too broken (leading to data loss), so we now think it is best to remove it entirely and work only with DMA now. The patch should be in 3.7. IMO, so users never get the chance to use both modes in parallel." * 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux: i2c: tegra: set irq name as device name i2c-nomadik: Fixup clock handling i2c: mxs: remove broken PIOQUEUE support
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Scattered selection of fixes: - radeon: load detect fixes from SuSE/AMD - intel: misc i830, sdvo regression, vesafb kickoff ums fix - exynos: maintainers entry update + fixes - udl: fix stride scanout issue it's slightly bigger than I'd probably like, but nothing looked dangerous enough to hold off on." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/udl: fix stride issues scanning out stride != width*bpp drm/radeon: add load detection support for ext DAC on R200 (v2) DRM/radeon: For single CRTC GPUs move handling of CRTC_CRT_ON to crtc_dpms(). DRM/Radeon: Fix TV DAC Load Detection for single CRTC chips. DRM/Radeon: Clean up code in TV DAC load detection. drm/radeon: fix ATPX function documentation drivers/gpu/drm/radeon/evergreen_cs.c: Remove unnecessary semicolon DRM/Radeon: On DVI-I use Load Detection when EDID is bogus. DRM/Radeon: Fix primary DAC Load Detection for RV100 chips. DRM/Radeon: Fix Load Detection on legacy primary DAC. drm: exynos: removed warning due to missing typecast for mixer driver data drm/exynos: add support for ARCH_MULTIPLATFORM MAINTAINERS: Add git repository for Exynos DRM drm/exynos: fix display on issue drm/i915: Only kick out vesafb if we takeover the fbcon with KMS drm/i915: be less verbose about inability to provide vendor backlight drm/i915: clear the entire sdvo infoframe buffer drm/i915: VGA needs to be on pipe A on i830M drm/i915: fix overlay on i830M
-
- 03 11月, 2012 17 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: "First post-Sandy pull request" 1) Fix antenna gain handling and initialization of chan->max_reg_power in wireless, from Felix Fietkau. 2) Fix nexthop handling in H.232 conntrack helper, from Julian Anastasov. 3) Only process 80211 mesh config header in certain kinds of frames, from Javier Cardona. 4) 80211 management frame header length needs to be validated, from Johannes Berg. 5) Don't access free'd SKBs in ath9k driver, from Felix Fietkay. 6) Test for permanent state correctly in VXLAN driver, from Stephen Hemminger. 7) BNX2X bug fixes from Yaniv Rosner and Dmitry Kravkov. 8) Fix off by one errors in bonding, from Nikolay ALeksandrov. 9) Fix divide by zero in TCP-Illinois congestion control. From Jesper Dangaard Brouer. 10) TCP metrics code says "Yo dawg, I heard you like sizeof, so I did a sizeof of a sizeof, so you can size your size" Fix from Julian Anastasov. 11) Several drivers do mdiobus_free without first doing an mdiobus_unregister leading to stray pointer references. Fix from Peter Senna Tschudin. 12) Fix OOPS in l2tp_eth_create() error path, it's another danling pointer kinda situation. Fix from Tom Parkin. 13) Hardware driven by the vmxnet driver can't handle larger than 16K fragments, so split them up when necessary. From Eric Dumazet. 14) Handle zero length data length in tcp_send_rcvq() properly. Fix from Pavel Emelyanov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits) tcp-repair: Handle zero-length data put in rcv queue vmxnet3: must split too big fragments l2tp: fix oops in l2tp_eth_create() error path cxgb4: Fix unable to get UP event from the LLD drivers/net/phy/mdio-bitbang.c: Call mdiobus_unregister before mdiobus_free drivers/net/ethernet/nxp/lpc_eth.c: Call mdiobus_unregister before mdiobus_free bnx2x: fix HW initialization using fw 7.8.x tcp: Fix double sizeof in new tcp_metrics code net: fix divide by zero in tcp algorithm illinois net: sctp: Fix typo in net/sctp bonding: fix second off-by-one error bonding: fix off-by-one error bnx2x: Disable FCoE for 57840 since not yet supported by FW bnx2x: Fix no link on 577xx 10G-baseT bnx2x: Fix unrecognized SFP+ module after driver is loaded bnx2x: Fix potential incorrect link speed provision bnx2x: Restore global registers back to default. bnx2x: Fix link down in 57712 following LFA bnx2x: Fix 57810 1G-KR link against certain switches. ixgbe: PTP get_ts_info missing software support ...
-
由 Pavel Emelyanov 提交于
When sending data into a tcp socket in repair state we should check for the amount of data being 0 explicitly. Otherwise we'll have an skb with seq == end_seq in rcv queue, but tcp doesn't expect this to happen (in particular a warn_on in tcp_recvmsg shoots). Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Reported-by: NGiorgos Mavrikas <gmavrikas@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
vmxnet3 has a 16Kbytes limit per tx descriptor, that happened to work as long as we provided PAGE_SIZE fragments. Our stack can now build larger fragments, so we need to split them to the 16kbytes boundary. Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: Njongman heo <jongman.heo@samsung.com> Tested-by: Njongman heo <jongman.heo@samsung.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Reviewed-by: NBhavesh Davda <bhavesh@vmware.com> Signed-off-by: NShreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Parkin 提交于
When creating an L2TPv3 Ethernet session, if register_netdev() should fail for any reason (for example, automatic naming for "l2tpeth%d" interfaces hits the 32k-interface limit), the netdev is freed in the error path. However, the l2tp_eth_sess structure's dev pointer is left uncleared, and this results in l2tp_eth_delete() then attempting to unregister the same netdev later in the session teardown. This results in an oops. To avoid this, clear the session dev pointer in the error path. Signed-off-by: NTom Parkin <tparkin@katalix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jonghwan Choi 提交于
Signed-off-by: NJonghwan Choi <jhbird.choi@samsung.com> Reviewed-by: NAmit Daniel Kachhap <amit.kachhap@linaro.org> Signed-off-by: NZhang Rui <rui.zhang@intel.com>
-
由 Igor Murzov 提交于
There are systems where video module known to work fine regardless of broken _DOD and ignoring returned value here doesn't cause any issues later. This should fix brightness controls on some laptops. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47861Signed-off-by: NIgor Murzov <e-mail@date.by> Reviewed-by: NSergey V <sftp.mtuci@gmail.com> Signed-off-by: NZhang Rui <rui.zhang@intel.com>
-
由 Devendra Naga 提交于
following were the errors reported drivers/thermal/rcar_thermal.c: In function ‘rcar_thermal_probe’: drivers/thermal/rcar_thermal.c:214:10: warning: passing argument 3 of ‘thermal_zone_device_register’ makes integer from pointer without a cast [enabled by default] include/linux/thermal.h:166:29: note: expected ‘int’ but argument is of type ‘struct rcar_thermal_priv *’ drivers/thermal/rcar_thermal.c:214:10: error: too few arguments to function ‘thermal_zone_device_register’ include/linux/thermal.h:166:29: note: declared here make[1]: *** [drivers/thermal/rcar_thermal.o] Error 1 make: *** [drivers/thermal/rcar_thermal.o] Error 2 with gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) Signed-off-by: NDevendra Naga <develkernel412222@gmail.com> Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NZhang Rui <rui.zhang@intel.com>
-
由 Vipul Pandya 提交于
If T4 configuration file gets loaded from the /lib/firmware/cxgb4/ directory then offload capabilities of the cards were getting disabled during initialization. Hence ULDs do not get an UP event from the LLD. Signed-off-by: NJay Hernandez <jay@chelsio.com> Signed-off-by: NVipul Pandya <vipul@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Senna Tschudin 提交于
Based on commit b27393ae Calling mdiobus_free without calling mdiobus_unregister causes BUG_ON(). This patch fixes the issue. The semantic patch that found this issue(http://coccinelle.lip6.fr/): // <smpl> @@ expression E; @@ ... when != mdiobus_unregister(E); + mdiobus_unregister(E); mdiobus_free(E); // </smpl> Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Senna Tschudin 提交于
Based on commit b27393ae Calling mdiobus_free without calling mdiobus_unregister causes BUG_ON(). This patch fixes the issue. The semantic patch that found this issue(http://coccinelle.lip6.fr/): // <smpl> @@ expression E; @@ ... when != mdiobus_unregister(E); + mdiobus_unregister(E); mdiobus_free(E); // </smpl> Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com> Tested-by: NRoland Stigge <stigge@antcom.de> Tested-by: NAlexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Kravkov 提交于
Since commit 96bed4b9 (use FW 7.8.2) BRB HW block needs to be initialized using fw values for all devices. Otherwise ETS on 57712/578xx will not work. Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management update from Rafael J. Wysocki: "Change the email address of the powernow-k8 maintainer." * tag 'pm-for-3.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq / powernow-k8: Change maintainer's email address
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input subsystem fixes from Dmitry Torokhov: "Just a few driver fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: tsc40 - remove wrong announcement of pressure support Input: lpc32xx-keys - select INPUT_MATRIXKMAP Input: pxa27x_keypad - clear pending interrupts on keypad config Input: wacom - correct bad Cintiq 24HD check Input: wacom - add INPUT_PROP_DIRECT flag to Cintiq 24HD Input: egalax_ts - get gpio from devicetree
-
由 Weston Andros Adamson 提交于
Return errno - not an NFS4ERR_. This worked because NFS4ERR_ACCESS == EACCES. Signed-off-by: NWeston Andros Adamson <dros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull more scsi target fixes from Nicholas Bellinger: "This series is a second round of target fixes for v3.7-rc4 that have come into target-devel over the last days, and are important enough to be applied ASAP. All are being CC'ed to stable. The most important two are: - target: Re-add explict zeroing of INQUIRY bounce buffer memory to fix a regression for handling zero-length payloads, a bug that went during v3.7-rc1, and hit >= v3.6.3 stable. (nab + paolo) - iscsi-target: Fix a long-standing missed R2T wakeup race in TX thread processing when using a single queue slot. (Roland) Thanks to Roland & PureStorage team for helping to track down this long standing race with iscsi-target single queue slot operation. Also, the tcm_fc(FCoE) regression bug that was observed recently with -rc2 code has also been resolved with the cancel_delayed_work() return bugfix (commit c0158ca6: "workqueue: cancel_delayed_work() should return %false if work item is idle") now in -rc3. Thanks again to Yi Zou, MDR, Robert Love @ Intel for helping to track this down." * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: Fix incorrect usage of nested IRQ spinlocks in ABORT_TASK path iscsi-target: Fix missed wakeup race in TX thread target: Avoid integer overflow in se_dev_align_max_sectors() target: Don't return success from module_init() if setup fails target: Re-add explict zeroing of INQUIRY bounce buffer memory
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging由 Linus Torvalds 提交于
Pull hwmon fixes from Guenter Roeck: "An e-mail address update, and fix a compile error on SPARC" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: Only include of_match_table with CONFIG_OF_GPIO hwmon, fam15h_power: Change email address, MAINTAINERS entry
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-frv由 Linus Torvalds 提交于
Pull FRV fixes from David Howells: "A collection of small fixes for the FRV architecture." * tag 'frv-fixes-20121102' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-frv: frv: fix the broken preempt frv: switch to saner kernel_execve() semantics FRV: Fix the new-style kernel_thread() stuff FRV: Fix the preemption handling FRV: gcc-4.1.2 also inlines weak functions FRV: Don't objcopy the GNU build_id note FRV: Add missing linux/export.h #inclusions
-