- 25 12月, 2012 1 次提交
-
-
由 Stephen Warren 提交于
Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: NRobert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: NStephen Warren <swarren@nvidia.com>
-
- 19 9月, 2012 1 次提交
-
-
由 Arnd Bergmann 提交于
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the samsung include directories Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NNicolas Pitre <nico@linaro.org> Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Bryan Wu <bryan.wu@canonical.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Felipe Balbi <balbi@ti.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Liam Girdwood <lrg@ti.com> Cc: linux-samsung-soc@vger.kernel.org
-
- 03 3月, 2012 1 次提交
-
-
由 Kukjin Kim 提交于
This patch moves S3C2410 stuff into mach-s3c24xx/ directory so that we can merge the s3c24 series' directories to the just one mach-s3c24xx/ directory. And this patch is including following. - re-ordered alphabetically by option text at Kconfig and Makefile - removed unused option, MACH_N35 - fixed duplcated option name, S3C2410_DMA to S3C24XX_DMA which is in plat-s3c24xx/ Cc: Ben Dooks <ben-linux@fluff.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 05 1月, 2012 1 次提交
-
-
由 Kukjin Kim 提交于
Hook these platforms restart code into the new restart hook rather than using arch_reset(). And adds local header file, common.h in arch/arm/mach-s3c2410/ and arch/arm/mach-s3c2440/ directories. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 22 8月, 2011 1 次提交
-
-
由 Nicolas Pitre 提交于
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
- 31 3月, 2011 1 次提交
-
-
由 Lucas De Marchi 提交于
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
-
- 08 3月, 2011 1 次提交
-
-
由 Lars-Peter Clausen 提交于
Currently all boards using the s3c2410_udc driver use a GPIO to control the state of the pullup, as a result the same code is reimplemented in each board This patch changes these boards to use the common implementation for GPIO controlled pullup in the UDC driver. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NVasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 20 10月, 2010 1 次提交
-
-
由 Nicolas Pitre 提交于
Since we're now using addruart to establish the debug mapping, we can remove the io_pg_offst and phys_io members of struct machine_desc. The various declarations were removed using the following script: grep -rl MACHINE_START arch/arm | xargs \ sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }' [ Initial patch was from Jeremy Kerr, example script from Russell King ] Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Eric Miao <eric.miao at canonical.com>
-
- 07 5月, 2010 8 次提交
-
-
由 Ben Dooks 提交于
The n30_init_irq() call is simply a call to s3c24xx_init_irq, so just remove it and update the machine definitions to call the IRQ initialision call directly. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Move to using gpio_request() and gpio_set_value() for the MMC power control calls. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Pinkava J 提交于
Signed-off-by: NJiri Pinkava <jiri.pinkava@vscht.cz> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Pinkava J 提交于
Signed-off-by: NJiri Pinkava <jiri.pinkava@vscht.cz> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Pinkava J 提交于
Signed-off-by: NJiri Pinkava <jiri.pinkava@vscht.cz> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Pinkava J 提交于
Signed-off-by: NJiri Pinkava <jiri.pinkava@vscht.cz> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Pinkava J 提交于
Signed-off-by: NJiri Pinkava <jiri.pinkava@vscht.cz> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Pinkava J 提交于
There is bug in USB setup code for Acer n35 (it is related directly to s3c2410, see doc). We want suspend host port (is not connected) but device port should be active. Signed-off-by: NJiri Pinkava <jiri.pinkava@vscht.cz> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 06 5月, 2010 1 次提交
-
-
由 Ben Dooks 提交于
Change mach-n30.c to use gpiolib for the GPIO lines that are directly manipulated by it. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 15 1月, 2010 1 次提交
-
-
由 Ben Dooks 提交于
Prepare for the forthcoming device changes by renaming s3c_device_usb to s3c_device_ohci as this is what the device represents. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 01 12月, 2009 1 次提交
-
-
由 Ben Dooks 提交于
Fix mach-n30.c to use the s3c_i2c0_set_platdata() call to register the platform data with the system to get rid of any reliance on having a real device structure available in memory. Since s3c_i2c0_set_platdata() copies the data, mark the original as __initdata so it is thrown away. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 18 5月, 2009 2 次提交
-
-
由 Ben Dooks 提交于
Prepare to remove the large number of S3C2410_GPxn defines by moving to S3C2410_GPx(n) in arch/arm. The following perl was used to change the files: perl -pi~ -e 's/S3C2410_GP([A-Z])([0-9]+)([^_^0-9])/S3C2410_GP\1\(\2\)\3/g' Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Move all the gpio functions out of <mach/hardware.h> as this file is for defining the generic IO base addresses for the kernel IO calls. Make a new header <mach/gpio-fns.h> to take this and include it via the chain from <linux/gpio.h> which is what most of these files should be using (and will be changed as soon as possible). Note, this does make minor changes to some drivers but should not mess up any pending merges. CC: Richard Purdie <rpurdie@rpsys.net> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> CC: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 07 4月, 2009 1 次提交
-
-
由 Daniel Silverstone 提交于
The platform data for the i2c-s3c2410 driver used to allow a min, max and desired frequency for the I2C bus. This patch reduces it to simply a desired frequency ceiling and corrects all the uses of the platform data appropriately. This means, for example, that on a system with a 66MHz fclk, a request for 100KHz will achieve 65KHz which is safe and acceptable, rather than 378KHz which it would have achieved without this change. Signed-off-by: NSimtec Linux Team <linux@simtec.co.uk> Signed-off-by: NDaniel Silverstone <dsilvers@simtec.co.uk> [ben-linux@fluff.org: tidy subject and description] Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 19 12月, 2008 1 次提交
-
-
由 Ben Dooks 提交于
As per Russell King's last review comment, find and remove all unnecessary includes of <linux/delay.h> in the files that do not need them. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 16 12月, 2008 1 次提交
-
-
由 Ben Dooks 提交于
Make the device i2c0 common to plat-s3c and move the definitions from arch/arm/plat-s3c24xx/devs.c Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 30 10月, 2008 2 次提交
-
-
由 Ben Dooks 提交于
Move the udc headers to the proper home in arch/arm/plat-s3c24xx/include/plat ready to clean out the old include directories. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Move the i2c headers to arch/arm/plat-s3c/include/plat ready to clean out the old include directories. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 08 10月, 2008 2 次提交
-
-
由 Ben Dooks 提交于
Continue moving the include files into arch/arm Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
First move of items out of include/asm-arm/plat-s3c* to their new homes under arch/arm/plat-s3c/include/plat and arch/arm/plat-s3c24xx/include/plat directories. Note, we have to create a dummy arch/arm/plat-s3c/Makefile to allow us to add arch/arm/plat-s3c/include/plat to the path. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 06 9月, 2008 1 次提交
-
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 07 8月, 2008 2 次提交
-
-
由 Russell King 提交于
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 08 7月, 2008 8 次提交
-
-
由 Ben Dooks 提交于
Minor style fixes. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Christer Weinigel 提交于
Initialise the hardware register settings on boot, to allow the device to function correctly. Signed-off-by: NChrister Weinigel <christer@weinigel.se> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Christer Weinigel 提交于
This patch adds the configuration needed for the LCD display on the n30. Signed-off-by: NChrister Weinigel <christer@weinigel.se> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Christer Weinigel 提交于
Add support for the Acer N35 and related devices. Signed-off-by: NChrister Weinigel <christer@weinigel.se> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Christer Weinigel 提交于
Add support for the LEDs on the Acer N30. Signed-off-by: NChrister Weinigel <christer@weinigel.se> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Christer Weinigel 提交于
Add support for the GPIO buttons on the Acer N30. Signed-off-by: NChrister Weinigel <christer@weinigel.se> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Christer Weinigel 提交于
Add support for the USB D+ pull up on the Acer N30. This is needed for the USB gadget to work properly. Signed-off-by: NChrister Weinigel <christer@weinigel.se> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Christer Weinigel 提交于
Clean up some junk from the official kernel. The compile-command is something that's only useful for me personally and doesn't belong in the mainstream kernel. Signed-off-by: NChrister Weinigel <christer@weinigel.se> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 22 7月, 2007 1 次提交
-
-
由 Ben Dooks 提交于
This patch moves items of the s3c24xx support into a new plat-s3c directory for items that use the s3c24xx support but are not directly s3c24xx compatible, such as the s3c2400 and s3c6400. git mv commands: git mv include/asm-arm/arch-s3c2410/iic.h include/asm-arm/plat-s3c/iic.h git mv include/asm-arm/arch-s3c2410/nand.h include/asm-arm/plat-s3c/nand.h git mv include/asm-arm/arch-s3c2410/regs-iic.h include/asm-arm/plat-s3c/regs-iic.h git mv include/asm-arm/arch-s3c2410/regs-nand.h include/asm-arm/plat-s3c/regs-nand.h git mv include/asm-arm/arch-s3c2410/regs-rtc.h include/asm-arm/plat-s3c/regs-rtc.h git mv include/asm-arm/arch-s3c2410/regs-serial.h include/asm-arm/plat-s3c/regs-serial.h git mv include/asm-arm/arch-s3c2410/regs-timer.h include/asm-arm/plat-s3c/regs-timer.h git mv include/asm-arm/arch-s3c2410/regs-watchdog.h include/asm-arm/plat-s3c/regs-watchdog.h Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-