In commit 98e3862c ("kcm: fix 0-length case for kcm_sendmsg()")
I tried to avoid skb allocation for 0-length case, but missed
a check for NULL pointer in the non EOR case.

Fixes: 98e3862c ("kcm: fix 0-length case for kcm_sendmsg()")
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NTom Herbert <tom@herbertland.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a check on the type of the source address for the case
where the destination address is in6addr_any. If the source is an
IPv4-mapped IPv6 source address, the destination is changed to
::ffff:127.0.0.1, and otherwise the destination is changed to ::1. This
is done in three locations to handle UDP calls to either connect() or
sendmsg() and TCP calls to connect(). Note that udpv6_sendmsg() delays
handling an in6addr_any destination until very late, so the patch only
needs to handle the case where the source is an IPv4-mapped IPv6
address.
Signed-off-by: NJonathan T. Leighton <jtleight@udel.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a check for the problematic case of an IPv4-mapped IPv6
source address and a destination address that is neither an IPv4-mapped
IPv6 address nor in6addr_any, and returns an appropriate error. The
check in done before returning from looking up the route.
Signed-off-by: NJonathan T. Leighton <jtleight@udel.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are two problems with the function tipc_sk_reinit.  Firstly
it's doing a manual walk over an rhashtable.  This is broken as
an rhashtable can be resized and if you manually walk over it
during a resize then you may miss entries.

Secondly it's missing memory barriers as previously the code used
spinlocks which provide the barriers implicitly.

This patch fixes both problems.

Fixes: 07f6c4bc ("tipc: convert tipc reference table to...")
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Acked-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When sending ARP requests over AX.25 links the hwaddress in the neighbour
cache are not getting initialized.  For such an incomplete arp entry
ax2asc2 will generate an empty string resulting in /proc/net/arp output
like the following:

$ cat /proc/net/arp
IP address       HW type     Flags       HW address            Mask     Device
192.168.122.1    0x1         0x2         52:54:00:00:5d:5f     *        ens3
172.20.1.99      0x3         0x0              *        bpq0

The missing field will confuse the procfs parsing of arp(8) resulting in
incorrect output for the device such as the following:

$ arp
Address                  HWtype  HWaddress           Flags Mask            Iface
gateway                  ether   52:54:00:00:5d:5f   C                     ens3
172.20.1.99                      (incomplete)                              ens3

This changes the content of /proc/net/arp to:

$ cat /proc/net/arp
IP address       HW type     Flags       HW address            Mask     Device
172.20.1.99      0x3         0x0         *                     *        bpq0
192.168.122.1    0x1         0x2         52:54:00:00:5d:5f     *        ens3

To do so it change ax2asc to put the string "*" in buf for a NULL address
argument.  Finally the HW address field is left aligned in a 17 character
field (the length of an ethernet HW address in the usual hex notation) for
readability.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It seems nobody used LLC since linux-3.12.

Fortunately fuzzers like syzkaller still know how to run this code,
otherwise it would be no fun.

Setting skb->sk without skb->destructor leads to all kinds of
bugs, we now prefer to be very strict about it.

Ideally here we would use skb_set_owner() but this helper does not exist yet,
only CAN seems to have a private helper for that.

Fixes: 376c7311 ("net: add a temporary sanity check in skb_orphan()")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

udp_ioctl(), as its name suggests, is used by UDP protocols,
but is also used by L2TP :(

L2TP should use its own handler, because it really does not
look the same.

SIOCINQ for instance should not assume UDP checksum or headers.

Thanks to Andrey and syzkaller team for providing the report
and a nice reproducer.

While crashes only happen on recent kernels (after commit
7c13f97f ("udp: do fwd memory scheduling on dequeue")), this
probably needs to be backported to older kernels.

Fixes: 7c13f97f ("udp: do fwd memory scheduling on dequeue")
Fixes: 85584672 ("udp: Fix udp_poll() and ioctl()")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NAndrey Konovalov <andreyknvl@google.com>
Acked-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In function igmpv3/mld_add_delrec() we allocate pmc and put it in
idev->mc_tomb, so we should free it when we don't need it in del_delrec().
But I removed kfree(pmc) incorrectly in latest two patches. Now fix it.

Fixes: 24803f38 ("igmp: do not remove igmp souce list info when ...")
Fixes: 1666d49e ("mld: do not remove mld souce list info when ...")
Reported-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Dmitry reported a kernel warning:

 WARNING: CPU: 3 PID: 2936 at net/kcm/kcmsock.c:627
 kcm_write_msgs+0x12e3/0x1b90 net/kcm/kcmsock.c:627
 CPU: 3 PID: 2936 Comm: a.out Not tainted 4.10.0-rc6+ #209
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
 Call Trace:
  __dump_stack lib/dump_stack.c:15 [inline]
  dump_stack+0x2ee/0x3ef lib/dump_stack.c:51
  panic+0x1fb/0x412 kernel/panic.c:179
  __warn+0x1c4/0x1e0 kernel/panic.c:539
  warn_slowpath_null+0x2c/0x40 kernel/panic.c:582
  kcm_write_msgs+0x12e3/0x1b90 net/kcm/kcmsock.c:627
  kcm_sendmsg+0x163a/0x2200 net/kcm/kcmsock.c:1029
  sock_sendmsg_nosec net/socket.c:635 [inline]
  sock_sendmsg+0xca/0x110 net/socket.c:645
  sock_write_iter+0x326/0x600 net/socket.c:848
  new_sync_write fs/read_write.c:499 [inline]
  __vfs_write+0x483/0x740 fs/read_write.c:512
  vfs_write+0x187/0x530 fs/read_write.c:560
  SYSC_write fs/read_write.c:607 [inline]
  SyS_write+0xfb/0x230 fs/read_write.c:599
  entry_SYSCALL_64_fastpath+0x1f/0xc2

when calling syscall(__NR_write, sock2, 0x208aaf27ul, 0x0ul) on a KCM
seqpacket socket. It appears that kcm_sendmsg() does not handle len==0
case correctly, which causes an empty skb is allocated and queued.
Fix this by skipping the skb allocation for len==0 case.
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

dsa_slave_create() can fail, and dsa_user_port_unapply() will properly check
for the network device not being NULL before attempting to destroy it. We were
not setting the slave network device as NULL if dsa_slave_create() failed, so
we would later on be calling dsa_slave_destroy() on a now free'd and
unitialized network device, causing crashes in dsa_slave_destroy().

Fixes: 83c0afae ("net: dsa: Add new binding implementation")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Andrey reported a kernel crash:

  general protection fault: 0000 [#1] SMP KASAN
  Dumping ftrace buffer:
     (ftrace buffer empty)
  Modules linked in:
  CPU: 2 PID: 3880 Comm: syz-executor1 Not tainted 4.10.0-rc6+ #124
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  task: ffff880060048040 task.stack: ffff880069be8000
  RIP: 0010:ping_v4_push_pending_frames net/ipv4/ping.c:647 [inline]
  RIP: 0010:ping_v4_sendmsg+0x1acd/0x23f0 net/ipv4/ping.c:837
  RSP: 0018:ffff880069bef8b8 EFLAGS: 00010206
  RAX: dffffc0000000000 RBX: ffff880069befb90 RCX: 0000000000000000
  RDX: 0000000000000018 RSI: ffff880069befa30 RDI: 00000000000000c2
  RBP: ffff880069befbb8 R08: 0000000000000008 R09: 0000000000000000
  R10: 0000000000000002 R11: 0000000000000000 R12: ffff880069befab0
  R13: ffff88006c624a80 R14: ffff880069befa70 R15: 0000000000000000
  FS:  00007f6f7c716700(0000) GS:ffff88006de00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000000004a6f28 CR3: 000000003a134000 CR4: 00000000000006e0
  Call Trace:
   inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:744
   sock_sendmsg_nosec net/socket.c:635 [inline]
   sock_sendmsg+0xca/0x110 net/socket.c:645
   SYSC_sendto+0x660/0x810 net/socket.c:1687
   SyS_sendto+0x40/0x50 net/socket.c:1655
   entry_SYSCALL_64_fastpath+0x1f/0xc2

This is because we miss a check for NULL pointer for skb_peek() when
the queue is empty. Other places already have the same check.

Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind")
Reported-by: NAndrey Konovalov <andreyknvl@google.com>
Tested-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Link layer protocols may unconditionally pull headers, as Ethernet
does in eth_type_trans. Ensure that the entire link layer header
always lies in the skb linear segment. tpacket_snd has such a check.
Extend this to packet_snd.

Variable length link layer headers complicate the computation
somewhat. Here skb->len may be smaller than dev->hard_header_len.

Round up the linear length to be at least as long as the smallest of
the two.
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The stack must not pass packets to device drivers that are shorter
than the minimum link layer header length.

Previously, packet sockets would drop packets smaller than or equal
to dev->hard_header_len, but this has false positives. Zero length
payload is used over Ethernet. Other link layer protocols support
variable length headers. Support for validation of these protocols
removed the min length check for all protocols.

Introduce an explicit dev->min_header_len parameter and drop all
packets below this value. Initially, set it to non-zero only for
Ethernet and loopback. Other protocols can follow in a patch to
net-next.

Fixes: 9ed988cd ("packet: validate variable length ll headers")
Reported-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Acked-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Dmitry reported a double free in sit_init_net():

  kernel BUG at mm/percpu.c:689!
  invalid opcode: 0000 [#1] SMP KASAN
  Dumping ftrace buffer:
     (ftrace buffer empty)
  Modules linked in:
  CPU: 0 PID: 15692 Comm: syz-executor1 Not tainted 4.10.0-rc6-next-20170206 #1
  Hardware name: Google Google Compute Engine/Google Compute Engine,
  BIOS Google 01/01/2011
  task: ffff8801c9cc27c0 task.stack: ffff88017d1d8000
  RIP: 0010:pcpu_free_area+0x68b/0x810 mm/percpu.c:689
  RSP: 0018:ffff88017d1df488 EFLAGS: 00010046
  RAX: 0000000000010000 RBX: 00000000000007c0 RCX: ffffc90002829000
  RDX: 0000000000010000 RSI: ffffffff81940efb RDI: ffff8801db841d94
  RBP: ffff88017d1df590 R08: dffffc0000000000 R09: 1ffffffff0bb3bdd
  R10: dffffc0000000000 R11: 00000000000135dd R12: ffff8801db841d80
  R13: 0000000000038e40 R14: 00000000000007c0 R15: 00000000000007c0
  FS:  00007f6ea608f700(0000) GS:ffff8801dbe00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 000000002000aff8 CR3: 00000001c8d44000 CR4: 00000000001426f0
  DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
  Call Trace:
   free_percpu+0x212/0x520 mm/percpu.c:1264
   ipip6_dev_free+0x43/0x60 net/ipv6/sit.c:1335
   sit_init_net+0x3cb/0xa10 net/ipv6/sit.c:1831
   ops_init+0x10a/0x530 net/core/net_namespace.c:115
   setup_net+0x2ed/0x690 net/core/net_namespace.c:291
   copy_net_ns+0x26c/0x530 net/core/net_namespace.c:396
   create_new_namespaces+0x409/0x860 kernel/nsproxy.c:106
   unshare_nsproxy_namespaces+0xae/0x1e0 kernel/nsproxy.c:205
   SYSC_unshare kernel/fork.c:2281 [inline]
   SyS_unshare+0x64e/0xfc0 kernel/fork.c:2231
   entry_SYSCALL_64_fastpath+0x1f/0xc2

This is because when tunnel->dst_cache init fails, we free dev->tstats
once in ipip6_tunnel_init() and twice in sit_init_net(). This looks
redundant but its ndo_uinit() does not seem enough to clean up everything
here. So avoid this by setting dev->tstats to NULL after the first free,
at least for -net.
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Under some circumstances it is possible that no new temporary addresses
will be generated.

For instance, addrconf_prefix_rcv_add_addr() indirectly calls
ipv6_create_tempaddr(), which creates a tentative temporary address and
starts dad. Next, addrconf_prefix_rcv_add_addr() indirectly calls
addrconf_verify_rtnl(). Now, assume that the previously created temporary
address has the least preferred lifetime among all existing addresses and
is still tentative (that is, dad is still running). Hence, the next run of
addrconf_verify_rtnl() is performed when the preferred lifetime of the
temporary address ends. If dad succeeds before the next run, the temporary
address becomes deprecated during the next run, but no new temporary
address is generated.

In order to fix this, schedule the next addrconf_verify_rtnl() run slightly
before the temporary address becomes deprecated, if dad succeeded.
Signed-off-by: NMarcus Huewe <suse-tux@gmx.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 6f29a130 ("sctp: sctp_addr_id2transport should verify the
addr before looking up assoc") invoked sctp_verify_addr to verify the
addr.

But it didn't check af variable beforehand, once users pass an address
with family = 0 through sockopt, sctp_get_af_specific will return NULL
and NULL pointer dereference will be caused by af->sockaddr_len.

This patch is to fix it by returning NULL if af variable is NULL.

Fixes: 6f29a130 ("sctp: sctp_addr_id2transport should verify the addr before looking up assoc")
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Alexander Popov reported that an application may trigger a BUG_ON in
sctp_wait_for_sndbuf if the socket tx buffer is full, a thread is
waiting on it to queue more data and meanwhile another thread peels off
the association being used by the first thread.

This patch replaces the BUG_ON call with a proper error handling. It
will return -EPIPE to the original sendmsg call, similarly to what would
have been done if the association wasn't found in the first place.
Acked-by: NAlexander Popov <alex.popov@linux.com>
Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Dmitry reported that UDP sockets being destroyed would trigger the
WARN_ON(atomic_read(&sk->sk_rmem_alloc)); in inet_sock_destruct()

It turns out we do not properly destroy skb(s) that have wrong UDP
checksum.

Thanks again to syzkaller team.

Fixes : 7c13f97f ("udp: do fwd memory scheduling on dequeue")
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Splicing from TCP socket is vulnerable when a packet with URG flag is
received and stored into receive queue.

__tcp_splice_read() returns 0, and sk_wait_data() immediately
returns since there is the problematic skb in queue.

This is a nice way to burn cpu (aka infinite loop) and trigger
soft lockups.

Again, this gem was found by syzkaller tool.

Fixes: 9c55e01c ("[TCP]: Splice receive support.")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NDmitry Vyukov  <dvyukov@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When for instance a mobile Linux device roams from one access point to
another with both APs sharing the same broadcast domain and a
multicast snooping switch in between:

1)    (c) <~~~> (AP1) <--[SSW]--> (AP2)

2)              (AP1) <--[SSW]--> (AP2) <~~~> (c)

Then currently IPv6 multicast packets will get lost for (c) until an
MLD Querier sends its next query message. The packet loss occurs
because upon roaming the Linux host so far stayed silent regarding
MLD and the snooping switch will therefore be unaware of the
multicast topology change for a while.

This patch fixes this by always resending MLD reports when an interface
change happens, for instance from NO-CARRIER to CARRIER state.
Signed-off-by: NLinus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Dmitry reported use-after-free in ip6_datagram_recv_specific_ctl()

A similar bug was fixed in commit 8ce48623 ("ipv6: tcp: restore
IP6CB for pktoptions skbs"), but I missed another spot.

tcp_v6_syn_recv_sock() can indeed set np->pktoptions from ireq->pktopts

Fixes: 971f10ec ("tcp: better TCP_SKB_CB layout to reduce cache line misses")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A previous change to fix checks for NL80211_MESHCONF_HT_OPMODE
missed setting the flag when replacing FILL_IN_MESH_PARAM_IF_SET
with checking codes. This results in dropping the received HT
operation value when called by nl80211_update_mesh_config(). Fix
this by setting the flag properly.

Fixes: 9757235f ("nl80211: correct checks for NL80211_MESHCONF_HT_OPMODE value")
Signed-off-by: NMasashi Honma <masashi.honma@gmail.com>
[rewrite commit message to use Fixes: line]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The function ieee80211_ie_split_vendor doesn't return 0 on errors. Instead
it returns any offset < ielen when WLAN_EID_VENDOR_SPECIFIC is found. The
return value in mesh_add_vendor_ies must therefore be checked against
ifmsh->ie_len and not 0. Otherwise all ifmsh->ie starting with
WLAN_EID_VENDOR_SPECIFIC will be rejected.

Fixes: 082ebb0c ("mac80211: fix mesh beacon format")
Signed-off-by: NThorsten Horstmann <thorsten@defutech.de>
Signed-off-by: NMathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>
[sven@narfation.org: Add commit message]
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The skcipher could have been of the async variant which may return from
skcipher_encrypt() with -EINPROGRESS after having queued the request.
The FILS AEAD implementation here does not have code for dealing with
that possibility, so allocate a sync cipher explicitly to avoid
potential issues with hardware accelerators.

This is based on the patch sent out by Ard.

Fixes: 39404fee ("mac80211: FILS AEAD protection for station mode association frames")
Reported-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NJouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Incorrect num_elem parameter value (1 vs. 5) was used in the
aes_siv_encrypt() call. This resulted in only the first one of the five
AAD vectors to SIV getting included in calculation. This does not
protect all the contents correctly and would not interoperate with a
standard compliant implementation.

Fix this by using the correct number. A matching fix is needed in the AP
side (hostapd) to get FILS authentication working properly.

Fixes: 39404fee ("mac80211: FILS AEAD protection for station mode association frames")
Reported-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NJouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Andrey Konovalov reported out of bound accesses in ip6gre_err()

If GRE flags contains GRE_KEY, the following expression
*(((__be32 *)p) + (grehlen / 4) - 1)

accesses data ~40 bytes after the expected point, since
grehlen includes the size of IPv6 headers.

Let's use a "struct gre_base_hdr *greh" pointer to make this
code more readable.

p[1] becomes greh->protocol.
grhlen is the GRE header length.

Fixes: c12b395a ("gre: Support GRE over IPv6")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

syzkaller found another out of bound access in ip_options_compile(),
or more exactly in cipso_v4_validate()

Fixes: 20e2a864 ("cipso: handle CIPSO options correctly when NetLabel is disabled")
Fixes: 446fda4f ("[NetLabel]: CIPSOv4 engine")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NDmitry Vyukov  <dvyukov@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Acked-by: NPaul Moore <paul@paul-moore.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Andrey Konovalov got crashes in __ip_options_echo() when a NULL skb->dst
is accessed.

ipv4_pktinfo_prepare() should not drop the dst if (evil) IP options
are present.

We could refine the test to the presence of ts_needtime or srr,
but IP options are not often used, so let's be conservative.

Thanks to syzkaller team for finding this bug.

Fixes: d826eb14 ("ipv4: PKTINFO doesnt need dst reference")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Dmitry reported a warning [1] showing that we were calling
net_disable_timestamp() -> static_key_slow_dec() from a non
process context.

Grabbing a mutex while holding a spinlock or rcu_read_lock()
is not allowed.

As Cong suggested, we now use a work queue.

It is possible netstamp_clear() exits while netstamp_needed_deferred
is not zero, but it is probably not worth trying to do better than that.

netstamp_needed_deferred atomic tracks the exact number of deferred
decrements.

[1]
[ INFO: suspicious RCU usage. ]
4.10.0-rc5+ #192 Not tainted
-------------------------------
./include/linux/rcupdate.h:561 Illegal context switch in RCU read-side
critical section!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 0
2 locks held by syz-executor14/23111:
 #0:  (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffff83a35c35>] lock_sock
include/net/sock.h:1454 [inline]
 #0:  (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffff83a35c35>]
rawv6_sendmsg+0x1e65/0x3ec0 net/ipv6/raw.c:919
 #1:  (rcu_read_lock){......}, at: [<ffffffff83ae2678>] nf_hook
include/linux/netfilter.h:201 [inline]
 #1:  (rcu_read_lock){......}, at: [<ffffffff83ae2678>]
__ip6_local_out+0x258/0x840 net/ipv6/output_core.c:160

stack backtrace:
CPU: 2 PID: 23111 Comm: syz-executor14 Not tainted 4.10.0-rc5+ #192
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:15 [inline]
 dump_stack+0x2ee/0x3ef lib/dump_stack.c:51
 lockdep_rcu_suspicious+0x139/0x180 kernel/locking/lockdep.c:4452
 rcu_preempt_sleep_check include/linux/rcupdate.h:560 [inline]
 ___might_sleep+0x560/0x650 kernel/sched/core.c:7748
 __might_sleep+0x95/0x1a0 kernel/sched/core.c:7739
 mutex_lock_nested+0x24f/0x1730 kernel/locking/mutex.c:752
 atomic_dec_and_mutex_lock+0x119/0x160 kernel/locking/mutex.c:1060
 __static_key_slow_dec+0x7a/0x1e0 kernel/jump_label.c:149
 static_key_slow_dec+0x51/0x90 kernel/jump_label.c:174
 net_disable_timestamp+0x3b/0x50 net/core/dev.c:1728
 sock_disable_timestamp+0x98/0xc0 net/core/sock.c:403
 __sk_destruct+0x27d/0x6b0 net/core/sock.c:1441
 sk_destruct+0x47/0x80 net/core/sock.c:1460
 __sk_free+0x57/0x230 net/core/sock.c:1468
 sock_wfree+0xae/0x120 net/core/sock.c:1645
 skb_release_head_state+0xfc/0x200 net/core/skbuff.c:655
 skb_release_all+0x15/0x60 net/core/skbuff.c:668
 __kfree_skb+0x15/0x20 net/core/skbuff.c:684
 kfree_skb+0x16e/0x4c0 net/core/skbuff.c:705
 inet_frag_destroy+0x121/0x290 net/ipv4/inet_fragment.c:304
 inet_frag_put include/net/inet_frag.h:133 [inline]
 nf_ct_frag6_gather+0x1106/0x3840
net/ipv6/netfilter/nf_conntrack_reasm.c:617
 ipv6_defrag+0x1be/0x2b0 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c:68
 nf_hook_entry_hookfn include/linux/netfilter.h:102 [inline]
 nf_hook_slow+0xc3/0x290 net/netfilter/core.c:310
 nf_hook include/linux/netfilter.h:212 [inline]
 __ip6_local_out+0x489/0x840 net/ipv6/output_core.c:160
 ip6_local_out+0x2d/0x170 net/ipv6/output_core.c:170
 ip6_send_skb+0xa1/0x340 net/ipv6/ip6_output.c:1722
 ip6_push_pending_frames+0xb3/0xe0 net/ipv6/ip6_output.c:1742
 rawv6_push_pending_frames net/ipv6/raw.c:613 [inline]
 rawv6_sendmsg+0x2d1a/0x3ec0 net/ipv6/raw.c:927
 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:744
 sock_sendmsg_nosec net/socket.c:635 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:645
 sock_write_iter+0x326/0x600 net/socket.c:848
 do_iter_readv_writev+0x2e3/0x5b0 fs/read_write.c:695
 do_readv_writev+0x42c/0x9b0 fs/read_write.c:872
 vfs_writev+0x87/0xc0 fs/read_write.c:911
 do_writev+0x110/0x2c0 fs/read_write.c:944
 SYSC_writev fs/read_write.c:1017 [inline]
 SyS_writev+0x27/0x30 fs/read_write.c:1014
 entry_SYSCALL_64_fastpath+0x1f/0xc2
RIP: 0033:0x445559
RSP: 002b:00007f6f46fceb58 EFLAGS: 00000292 ORIG_RAX: 0000000000000014
RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 0000000000445559
RDX: 0000000000000001 RSI: 0000000020f1eff0 RDI: 0000000000000005
RBP: 00000000006e19c0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000292 R12: 0000000000700000
R13: 0000000020f59000 R14: 0000000000000015 R15: 0000000000020400
BUG: sleeping function called from invalid context at
kernel/locking/mutex.c:752
in_atomic(): 1, irqs_disabled(): 0, pid: 23111, name: syz-executor14
INFO: lockdep is turned off.
CPU: 2 PID: 23111 Comm: syz-executor14 Not tainted 4.10.0-rc5+ #192
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:15 [inline]
 dump_stack+0x2ee/0x3ef lib/dump_stack.c:51
 ___might_sleep+0x47e/0x650 kernel/sched/core.c:7780
 __might_sleep+0x95/0x1a0 kernel/sched/core.c:7739
 mutex_lock_nested+0x24f/0x1730 kernel/locking/mutex.c:752
 atomic_dec_and_mutex_lock+0x119/0x160 kernel/locking/mutex.c:1060
 __static_key_slow_dec+0x7a/0x1e0 kernel/jump_label.c:149
 static_key_slow_dec+0x51/0x90 kernel/jump_label.c:174
 net_disable_timestamp+0x3b/0x50 net/core/dev.c:1728
 sock_disable_timestamp+0x98/0xc0 net/core/sock.c:403
 __sk_destruct+0x27d/0x6b0 net/core/sock.c:1441
 sk_destruct+0x47/0x80 net/core/sock.c:1460
 __sk_free+0x57/0x230 net/core/sock.c:1468
 sock_wfree+0xae/0x120 net/core/sock.c:1645
 skb_release_head_state+0xfc/0x200 net/core/skbuff.c:655
 skb_release_all+0x15/0x60 net/core/skbuff.c:668
 __kfree_skb+0x15/0x20 net/core/skbuff.c:684
 kfree_skb+0x16e/0x4c0 net/core/skbuff.c:705
 inet_frag_destroy+0x121/0x290 net/ipv4/inet_fragment.c:304
 inet_frag_put include/net/inet_frag.h:133 [inline]
 nf_ct_frag6_gather+0x1106/0x3840
net/ipv6/netfilter/nf_conntrack_reasm.c:617
 ipv6_defrag+0x1be/0x2b0 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c:68
 nf_hook_entry_hookfn include/linux/netfilter.h:102 [inline]
 nf_hook_slow+0xc3/0x290 net/netfilter/core.c:310
 nf_hook include/linux/netfilter.h:212 [inline]
 __ip6_local_out+0x489/0x840 net/ipv6/output_core.c:160
 ip6_local_out+0x2d/0x170 net/ipv6/output_core.c:170
 ip6_send_skb+0xa1/0x340 net/ipv6/ip6_output.c:1722
 ip6_push_pending_frames+0xb3/0xe0 net/ipv6/ip6_output.c:1742
 rawv6_push_pending_frames net/ipv6/raw.c:613 [inline]
 rawv6_sendmsg+0x2d1a/0x3ec0 net/ipv6/raw.c:927
 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:744
 sock_sendmsg_nosec net/socket.c:635 [inline]
 sock_sendmsg+0xca/0x110 net/socket.c:645
 sock_write_iter+0x326/0x600 net/socket.c:848
 do_iter_readv_writev+0x2e3/0x5b0 fs/read_write.c:695
 do_readv_writev+0x42c/0x9b0 fs/read_write.c:872
 vfs_writev+0x87/0xc0 fs/read_write.c:911
 do_writev+0x110/0x2c0 fs/read_write.c:944
 SYSC_writev fs/read_write.c:1017 [inline]
 SyS_writev+0x27/0x30 fs/read_write.c:1014
 entry_SYSCALL_64_fastpath+0x1f/0xc2
RIP: 0033:0x445559

Fixes: b90e5794 ("net: dont call jump_label_dec from irq context")
Suggested-by: NCong Wang <xiyou.wangcong@gmail.com>
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If ->get_regs_len() callback return 0, we allocate 0 bytes of memory,
what print ugly warning in dmesg, which can be found further below.

This happen on mac80211 devices where ieee80211_get_regs_len() just
return 0 and driver only fills ethtool_regs structure and actually
do not provide any dump. However I assume this can happen on other
drivers i.e. when for some devices driver provide regs dump and for
others do not. Hence preventing to to print warning in ethtool code
seems to be reasonable.

ethtool: vmalloc: allocation failure: 0 bytes, mode:0x24080c2(GFP_KERNEL|__GFP_HIGHMEM|__GFP_ZERO)
<snip>
Call Trace:
[<ffffffff813bde47>] dump_stack+0x63/0x8c
[<ffffffff811b0a1f>] warn_alloc+0x13f/0x170
[<ffffffff811f0476>] __vmalloc_node_range+0x1e6/0x2c0
[<ffffffff811f0874>] vzalloc+0x54/0x60
[<ffffffff8169986c>] dev_ethtool+0xb4c/0x1b30
[<ffffffff816adbb1>] dev_ioctl+0x181/0x520
[<ffffffff816714d2>] sock_do_ioctl+0x42/0x50
<snip>
Mem-Info:
active_anon:435809 inactive_anon:173951 isolated_anon:0
 active_file:835822 inactive_file:196932 isolated_file:0
 unevictable:0 dirty:8 writeback:0 unstable:0
 slab_reclaimable:157732 slab_unreclaimable:10022
 mapped:83042 shmem:306356 pagetables:9507 bounce:0
 free:130041 free_pcp:1080 free_cma:0
Node 0 active_anon:1743236kB inactive_anon:695804kB active_file:3343288kB inactive_file:787728kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:332168kB dirty:32kB writeback:0kB shmem:0kB shmem_thp: 0kB shmem_pmdmapped: 0kB anon_thp: 1225424kB writeback_tmp:0kB unstable:0kB pages_scanned:0 all_unreclaimable? no
Node 0 DMA free:15900kB min:136kB low:168kB high:200kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB present:15984kB managed:15900kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB
lowmem_reserve[]: 0 3187 7643 7643
Node 0 DMA32 free:419732kB min:28124kB low:35152kB high:42180kB active_anon:541180kB inactive_anon:248988kB active_file:1466388kB inactive_file:389632kB unevictable:0kB writepending:0kB present:3370280kB managed:3290932kB mlocked:0kB slab_reclaimable:217184kB slab_unreclaimable:4180kB kernel_stack:160kB pagetables:984kB bounce:0kB free_pcp:2236kB local_pcp:660kB free_cma:0kB
lowmem_reserve[]: 0 0 4456 4456
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the latest version of the IPv6 Segment Routing IETF draft [1] the
cleanup flag is removed and the flags field length is shrunk from 16 bits
to 8 bits. As a consequence, the input of the HMAC computation is modified
in a non-backward compatible way by covering the whole octet of flags
instead of only the cleanup bit. As such, if an implementation compatible
with the latest draft computes the HMAC of an SRH who has other flags set
to 1, then the HMAC result would differ from the current implementation.

This patch carries those modifications to prevent conflict with other
implementations of IPv6 SR.

[1] https://tools.ietf.org/html/draft-ietf-6man-segment-routing-header-05Signed-off-by: NDavid Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

syszkaller fuzzer was able to trigger a divide by zero, when
TCP window scaling is not enabled.

SO_RCVBUF can be used not only to increase sk_rcvbuf, also
to decrease it below current receive buffers utilization.

If mss is negative or 0, just return a zero TCP window.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NDmitry Vyukov  <dvyukov@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Casting is a high precedence operation but "off" and "i" are in terms of
bytes so we need to have some parenthesis here.

Fixes: fbfa743a ("ipv6: fix ip6_tnl_parse_tlv_enc_lim()")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the current version, the matchall internal state is split into two
structs: cls_matchall_head and cls_matchall_filter. This makes little
sense, as matchall instance supports only one filter, and there is no
situation where one exists and the other does not. In addition, that led
to some races when filter was deleted while packet was processed.

Unify that two structs into one, thus simplifying the process of matchall
creation and deletion. As a result, the new, delete and get callbacks have
a dummy implementation where all the work is done in destroy and change
callbacks, as was done in cls_cgroup.

Fixes: bf3994d2 ("net/sched: introduce Match-all classifier")
Reported-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NYotam Gigi <yotamg@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Olga Kornievskaia says: "I ran into this oops in the nfsd (below)
(4.10-rc3 kernel). To trigger this I had a client (unsuccessfully) try
to mount the server with krb5 where the server doesn't have the
rpcsec_gss_krb5 module built."

The problem is that rsci.cred is copied from a svc_cred structure that
gss_proxy didn't properly initialize.  Fix that.

[120408.542387] general protection fault: 0000 [#1] SMP
...
[120408.565724] CPU: 0 PID: 3601 Comm: nfsd Not tainted 4.10.0-rc3+ #16
[120408.567037] Hardware name: VMware, Inc. VMware Virtual =
Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015
[120408.569225] task: ffff8800776f95c0 task.stack: ffffc90003d58000
[120408.570483] RIP: 0010:gss_mech_put+0xb/0x20 [auth_rpcgss]
...
[120408.584946]  ? rsc_free+0x55/0x90 [auth_rpcgss]
[120408.585901]  gss_proxy_save_rsc+0xb2/0x2a0 [auth_rpcgss]
[120408.587017]  svcauth_gss_proxy_init+0x3cc/0x520 [auth_rpcgss]
[120408.588257]  ? __enqueue_entity+0x6c/0x70
[120408.589101]  svcauth_gss_accept+0x391/0xb90 [auth_rpcgss]
[120408.590212]  ? try_to_wake_up+0x4a/0x360
[120408.591036]  ? wake_up_process+0x15/0x20
[120408.592093]  ? svc_xprt_do_enqueue+0x12e/0x2d0 [sunrpc]
[120408.593177]  svc_authenticate+0xe1/0x100 [sunrpc]
[120408.594168]  svc_process_common+0x203/0x710 [sunrpc]
[120408.595220]  svc_process+0x105/0x1c0 [sunrpc]
[120408.596278]  nfsd+0xe9/0x160 [nfsd]
[120408.597060]  kthread+0x101/0x140
[120408.597734]  ? nfsd_destroy+0x60/0x60 [nfsd]
[120408.598626]  ? kthread_park+0x90/0x90
[120408.599448]  ret_from_fork+0x22/0x30

Fixes: 1d658336 "SUNRPC: Add RPC based upcall mechanism for RPCGSS auth"
Cc: stable@vger.kernel.org
Cc: Simo Sorce <simo@redhat.com>
Reported-by: NOlga Kornievskaia <kolga@netapp.com>
Tested-by: NOlga Kornievskaia <kolga@netapp.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

When matching on the ICMPv6 code ICMPV6_CODE rather than
ICMPV4_CODE attributes should be used.

This corrects what appears to be a typo.

Sample usage:

tc qdisc add dev eth0 ingress
tc filter add dev eth0 protocol ipv6 parent ffff: flower \
	indev eth0 ip_proto icmpv6 type 128 code 0 action drop

Without this change the code parameter above is effectively ignored.

Fixes: 7b684884 ("net/sched: cls_flower: Support matching on ICMP type and code")
Signed-off-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IPv6 will mark data that is smaller that mtu - headersize as
CHECKSUM_PARTIAL, but if the data will completely fill the mtu,
the packet checksum will be computed in software instead.
Extend the conditional to include the data that fills the mtu
as well.
Signed-off-by: NVladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When removing a bcm tx operation either a hrtimer or a tasklet might run.
As the hrtimer triggers its associated tasklet and vice versa we need to
take care to mutually terminate both handlers.
Reported-by: NMichael Josenhans <michael.josenhans@web.de>
Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net>
Tested-by: NMichael Josenhans <michael.josenhans@web.de>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

Zhang Yanmin reported crashes [1] and provided a patch adding a
synchronize_rcu() call in can_rx_unregister()

The main problem seems that the sockets themselves are not RCU
protected.

If CAN uses RCU for delivery, then sockets should be freed only after
one RCU grace period.

Recent kernels could use sock_set_flag(sk, SOCK_RCU_FREE), but let's
ease stable backports with the following fix instead.

[1]
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff81495e25>] selinux_socket_sock_rcv_skb+0x65/0x2a0

Call Trace:
 <IRQ>
 [<ffffffff81485d8c>] security_sock_rcv_skb+0x4c/0x60
 [<ffffffff81d55771>] sk_filter+0x41/0x210
 [<ffffffff81d12913>] sock_queue_rcv_skb+0x53/0x3a0
 [<ffffffff81f0a2b3>] raw_rcv+0x2a3/0x3c0
 [<ffffffff81f06eab>] can_rcv_filter+0x12b/0x370
 [<ffffffff81f07af9>] can_receive+0xd9/0x120
 [<ffffffff81f07beb>] can_rcv+0xab/0x100
 [<ffffffff81d362ac>] __netif_receive_skb_core+0xd8c/0x11f0
 [<ffffffff81d36734>] __netif_receive_skb+0x24/0xb0
 [<ffffffff81d37f67>] process_backlog+0x127/0x280
 [<ffffffff81d36f7b>] net_rx_action+0x33b/0x4f0
 [<ffffffff810c88d4>] __do_softirq+0x184/0x440
 [<ffffffff81f9e86c>] do_softirq_own_stack+0x1c/0x30
 <EOI>
 [<ffffffff810c76fb>] do_softirq.part.18+0x3b/0x40
 [<ffffffff810c8bed>] do_softirq+0x1d/0x20
 [<ffffffff81d30085>] netif_rx_ni+0xe5/0x110
 [<ffffffff8199cc87>] slcan_receive_buf+0x507/0x520
 [<ffffffff8167ef7c>] flush_to_ldisc+0x21c/0x230
 [<ffffffff810e3baf>] process_one_work+0x24f/0x670
 [<ffffffff810e44ed>] worker_thread+0x9d/0x6f0
 [<ffffffff810e4450>] ? rescuer_thread+0x480/0x480
 [<ffffffff810ebafc>] kthread+0x12c/0x150
 [<ffffffff81f9ccef>] ret_from_fork+0x3f/0x70
Reported-by: NZhang Yanmin <yanmin.zhang@intel.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Unlike ipv4, this control socket is shared by all cpus so we cannot use
it as scratchpad area to annotate the mark that we pass to ip6_xmit().

Add a new parameter to ip6_xmit() to indicate the mark. The SCTP socket
family caches the flowi6 structure in the sctp_transport structure, so
we cannot use to carry the mark unless we later on reset it back, which
I discarded since it looks ugly to me.

Fixes: bf99b4de ("tcp: fix mark propagation with fwmark_reflect enabled")
Suggested-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>