Now that we have a "Headset Mic" name, let's use it for some devices
we know for sure has a headset mic jack.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Headset mic jacks, i e TRRS style jacks with Headphone Left,
Headphone Right, Mic and GND signals, are becoming increasingly
common and are now being shipped by several manufacturers.

Unfortunately, the HDA specification does not give us any hint
of whether a Mic pin belongs to such a jack or not, but it would
still be helpful for the user to know (especially if there is one
TRS Mic jack and one TRRS headset jack).

This new fixup causes the first (non-dock, non-internal) mic to
be a headset mic jack. The algorithm can be later refined if needed.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The new HP desktop machines have Realtek codecs and their LEDs are
controlled via GPIO as for many laptop models.  Add similar hooks as
well as in patch_sigmatel.c for controlling LEDs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The verb to set up the digital beep via AC_VERB_SET_DIGI_CONVERT_2
should be executed at resume as well.  Use the cached write for it
being performed automatically at resume.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

While playing the digital beep tone, the codec shouldn't be turned
off.  This patch adds proper snd_hda_power_up()/down() calls at each
time when the beep is played or off.

Also, this fixes automatically an unnecessary codec power-up at
detaching the beep device when the beep isn't being played.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Instead of calling snd_hda_attach_beep_device() and
snd_hda_detach_beep_device() in each codec driver, move them to the
generic parser.  The codec driver just needs to set spec->beep_nid for
activating the digital beep.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Back-merged for refactoring beep stuff.

The argument passed to snd_hda_attach_beep_device() is a widget NID
while spec->beep_amp holds the composed value for amp controls.

Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This leaks the beep input device after module unload, which leads to
Oops.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=55321Signed-off-by: NTakashi Iwai <tiwai@suse.de>

"Playback Design" products need a 50ms delay after setting the USB
interface.
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Reported-by: NAndreas Koch <andreas@akdesigninc.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

UAC2 compliant audio devices may announce the capability to transport
raw audio data on their endpoints. Catch this and handle it as
'special' stream on the ALSA side.
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Reported-by: NAndreas Koch <andreas@akdesigninc.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This field may use up to 32 bits, so it should be handled as unsigned
int.
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Reported-by: NAndreas Koch <andreas@akdesigninc.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The maxpacksize field is given in some quirks, but it gets ignored (in
favour of wMaxPacketSize from the first endpoint.) This patch favours
the one in the quirk.

Digidesign Mbox and Mbox 2 are the only affected quirks and the devices
are assumed to be working without this patch. So for safety against the
values in the quirk being incorrect, remove them.

The datainterval is also ignored but there are not currently any quirks
which choose to override this.

Cc: Damien Zammit <damien@zamaudio.com>
Cc: Chris J Arges <christopherarges@gmail.com>
Signed-off-by: NMark Hills <mark@xwax.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The hardware also has a PCM capture device which is not implemented in
this patch.

It may be possible to generalise this to Saffire 6 USB support and some
of the other Focusrite interfaces, but as I don't have access to these
devices we should wait until capture support is working first.

Capture support is not implemented because the code assumes the endpoint
to have its own interface (instead, it shares the interface with playback)
and some thought will be needed to lift this limitation.
Signed-off-by: NMark Hills <mark@xwax.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Correct spelling typos in Documentation/sound/alsa
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

During the transition to the generic parser, the hook to the codec
specific automute function was forgotten.  This resulted in the silent
output on some MacBooks.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

"chn" here is a number between 0 and 255, but ->chn_info[] only has
16 elements so there is a potential write beyond the end of the
array.

If the seq_mode isn't SEQ_2 then we let the individual drivers
(either opl3.c or midi_synth.c) handle it.  Those functions all
do a bounds check on "chn" so I haven't changed anything here.
The opl3.c driver has up to 18 channels and not 16.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

spec->dsp_state is initialized to DSP_DOWNLOAD_INIT, no need to reset
and check it in ca0132_download_dsp().
Signed-off-by: NDylan Reid <dgreid@chromium.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Instead of using the dspload_is_loaded() function, check the dsp_state
that is kept in the spec.  The dspload_is_loaded() function returns
true if the DSP transfer was never started.  This false-positive leads
to multiple second delays when ca0132_setup_efaults() times out on
each write.
Signed-off-by: NDylan Reid <dgreid@chromium.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

If dspload_image() fails, it was ignored and dspload_wait_loaded() was
still called.  dsp_loaded should never be set to true in this case,
skip it.  The check in dspload_wait_loaded() return true if the DSP is
loaded or if it never started.
Signed-off-by: NDylan Reid <dgreid@chromium.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

If there are no internal speakers, we should not turn the eapd switch
off, because it might be necessary to keep high for Headphone.

BugLink: https://bugs.launchpad.net/bugs/1155016Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

So far, the driver doesn't power down the widget at going down to D3
when the widget node has an EAPD capability and EAPD is actually set
on all codecs unless codec->power_filter is set explicitly.
This caused a problem on some Conexant codecs, leading to click
noises, and we set it as NULL there.  But it is very unlikely that the
problem hits only these codecs.

Looking back at the development history, this workaround for EAPD was
introduced just for some laptops with STAC9200 codec, then we applied
it blindly for all.  Now, since it's revealed to have an ill effect,
we should disable this workaround per default and apply only for the
known requiring systems.

The EAPD workaround is implemented now as snd_hda_codec_eapd_power_filter(),
and this has to be set explicitly by the codec driver when needed.
As of now, only patch_stac9200() sets this one.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use the dynamic array allocations for pins, converters and PCM arrays
instead of the fixed size arrays.  The modern HDMI codecs get more and
more pins, and we don't know the sensitive limit.

Most of the patch are spent for the straight conversions from the
fixed array access to snd_array helpers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Make sure that the allocated buffer for reading the proc file won't
expose the uncleared kernel memory.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In the connection list expansion in hda_codec.c and hda_proc.c, the
value returned from snd_hda_get_num_raw_conns() is used as the array
size to store the connection list.  However, the function returns
simply a raw value of the AC_PAR_CONNLIST_LEN parameter, and the
widget list with ranges isn't considered there.  Thus it may return a
smaller size than the actual list, which results in -ENOSPC in
snd_hda_get_raw_conections().

This patch fixes the bug by parsing the connection list correctly also
for snd_hda_get_num_raw_conns().
Reported-and-tested-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The NuForce UDH-100 numbers its interfaces incorrectly, which makes the
interface associations come out wrong, which results in the driver
erroring out with the message "Audio class v2 interfaces need an
interface association".

Work around this by searching for the interface association descriptor
also in some other place where it might have ended up.
Reported-and-tested-by: NDave Helstroom <helstroom@google.com>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The dereference should be moved below the NULL test.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

script/kernel-doc reports the following type of warnings (when run in verbose
mode):

Warning(sound/core/init.c:152): No description found for return value of
'snd_card_create'

To fix that:
- add missing descriptions of function return values
- use "Return:" sections to describe those return values

Along the way:
- complete some descriptions
- fix some typos
Signed-off-by: NYacine Belkadi <yacine.belkadi.1@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Expose the newly added TCO LTC and sync check functions to userspace.
Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds new ALSA controls to query the LTC state from userspace.
Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch prepares snd_hdspm_get_sync_check() to also check the TCO
sync state. The added feature will be exposed to the user in a later
commit.
Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Considerably shorten the code by using a macro. Though this won't lower
the binary size, it makes the source more readable.
Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

For 96kHz, MADI allows to multiplex the samples (SMUX) or to use a
dedicated 96K mode. The RME cards default to 96K mode, but since not all
external MADI equipment supports this, provide a switch to users that
changes the on-wire protocol to SMUX.
Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When using the additional Time Code Option module in slave mode or the
SYNC-In wordclock connector, the sample rate needs to be returned by
hdspm_external_sample_rate().

Since this sample rate may contain any value with 1Hz granularity, we
need to round it to a common rate as done by the OSX driver.

[Fixed missing function declarations by tiwai]
Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This commit introduces hdspm_get_pll_freq() to avoid code duplication.
Reading the sample rate from the DDS register will be required by
upcoming code.
Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When a headphone pin is set up as a shared hp/mic pin, we rather want
to keep it as a headphone primarily as default, but the driver
overrides it always as a mic pin, just because the input controls are
created after outputs.  Add a check of pin NID and skip the
re-initialization of pinctl for such a shared hp/mic pin.
Reported-by: NJonathan Woithe <jwoithe@just42.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_seq_timer_open() didn't catch the whole error path but let through
if the timer id is a slave.  This may lead to Oops by accessing the
uninitialized pointer.

 BUG: unable to handle kernel NULL pointer dereference at 00000000000002ae
 IP: [<ffffffff819b3477>] snd_seq_timer_open+0xe7/0x130
 PGD 785cd067 PUD 76964067 PMD 0
 Oops: 0002 [#4] SMP
 CPU 0
 Pid: 4288, comm: trinity-child7 Tainted: G      D W 3.9.0-rc1+ #100 Bochs Bochs
 RIP: 0010:[<ffffffff819b3477>]  [<ffffffff819b3477>] snd_seq_timer_open+0xe7/0x130
 RSP: 0018:ffff88006ece7d38  EFLAGS: 00010246
 RAX: 0000000000000286 RBX: ffff88007851b400 RCX: 0000000000000000
 RDX: 000000000000ffff RSI: ffff88006ece7d58 RDI: ffff88006ece7d38
 RBP: ffff88006ece7d98 R08: 000000000000000a R09: 000000000000fffe
 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
 R13: ffff8800792c5400 R14: 0000000000e8f000 R15: 0000000000000007
 FS:  00007f7aaa650700(0000) GS:ffff88007f800000(0000) GS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00000000000002ae CR3: 000000006efec000 CR4: 00000000000006f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Process trinity-child7 (pid: 4288, threadinfo ffff88006ece6000, task ffff880076a8a290)
 Stack:
  0000000000000286 ffffffff828f2be0 ffff88006ece7d58 ffffffff810f354d
  65636e6575716573 2065756575712072 ffff8800792c0030 0000000000000000
  ffff88006ece7d98 ffff8800792c5400 ffff88007851b400 ffff8800792c5520
 Call Trace:
  [<ffffffff810f354d>] ? trace_hardirqs_on+0xd/0x10
  [<ffffffff819b17e9>] snd_seq_queue_timer_open+0x29/0x70
  [<ffffffff819ae01a>] snd_seq_ioctl_set_queue_timer+0xda/0x120
  [<ffffffff819acb9b>] snd_seq_do_ioctl+0x9b/0xd0
  [<ffffffff819acbe0>] snd_seq_ioctl+0x10/0x20
  [<ffffffff811b9542>] do_vfs_ioctl+0x522/0x570
  [<ffffffff8130a4b3>] ? file_has_perm+0x83/0xa0
  [<ffffffff810f354d>] ? trace_hardirqs_on+0xd/0x10
  [<ffffffff811b95ed>] sys_ioctl+0x5d/0xa0
  [<ffffffff813663fe>] ? trace_hardirqs_on_thunk+0x3a/0x3f
  [<ffffffff81faed69>] system_call_fastpath+0x16/0x1b
Reported-and-tested-by: NTommi Rantala <tt.rantala@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Having snd_BUG_ON() only evaluate its conditional when CONFIG_SND_DEBUG
is set leads to frequent bugs, since other similar macros in the kernel
have different behavior. Let's make snd_BUG_ON() act like those macros
so it will stop being accidentally misused.
Signed-off-by: NChristine Spang <christine.spang@oracle.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>