Frameworks that may want to enumerate CMA heaps (e.g. Ion) will find it
useful to have an explicit name attached to each region. Store the name
in each CMA structure.
Signed-off-by: NLaura Abbott <labbott@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-fixes-for-4.11e' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Fifth set of IIO fixes for the 4.11 cycle.

As these are rather late in the cycle, they may sneak over into 4.12.
There is a fix for a regression caused by another fix (hid sensors
hardware seems to vary a lot in how various corner cases are handled).

* ad7303
  - fix channel description. Numeric values were being passed as characters
  presumably leading to garbage from the userspace interface.
* as3935
  - the write data macro was wrong so fix it.
* bmp280
  - incorrect handling of negative values as being unsigned broke humidity
  calculation.
* hid-sensor
  - Restore the poll and hysteresis values after resume as some hardware
  doesn't do it.
* stm32-trigger
  - buglet in reading the sampling frequency

Merge tag 'iio-for-4.12d' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Fourth set of IIO new device support, features and cleanups for the 4.12 cycle

New device support
* max1117, 1118 and 1119
  - new ADC driver
* max9611
  - new ADC driver
* pm8xxx hk/xoadc
  - new driver with some shared features broken out from the SPMI vadc.
* sun4i-gpadc
  - A33 thermal sensor support (with associated rework)
* stm32-dac
  - new driver and bindings
* stm32 trigger
  - enable support of quadrature encoder device and counter modes

Features
* apds9960
  - use the runtime pm for normal suspend
* stm32-adc
  - add opition to sest resolution via devicetree
* xoadc
  - augment DT bindings to deal with some weird mux cases

Cleanups
* ad5933
  - protect direct mode using claim and release helpers
* ade7759
  - S_IRUGO and friends to octal in two goes
* adis16203
  - drop unnecessary brackets
* hid-sensor
  - fix unbalanced pm_runtieme_enable error when probing after remove
* lsm6dsx
  - use actual part numbers for device name when known
  - simplify data read pin parsing
* mpu3050
  - avoid double reporting errors

This patch fixes the following sparse warning:
ieee80211_tx.c:174:36: incorrect type in assignment (different base types)
ieee80211_tx.c:174:36: expected unsigned short [unsigned] [short] [usertype] <noident>
ieee80211_tx.c:174:36: got restricted __be16 [usertype] <noident>

by adding left side cast to __be16.
Signed-off-by: NMartin Karamihov <martinowar@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Changed the type of wpa_ie_len from (int *) to (unsigned int *) in the
function rtw_get_wpa_ie(..) to suppress signedness mismatch warnings in
rtw_generate_ie of the type-

drivers/staging/rtl8188eu//core/rtw_ieee80211.c:1009:60: warning: incorrect
type in argument 2 (different signedness)
drivers/staging/rtl8188eu//core/rtw_ieee80211.c:1009:60:    expected int
*wpa_ie_len
drivers/staging/rtl8188eu//core/rtw_ieee80211.c:1009:60:    got unsigned
int *<noident>
Signed-off-by: NAishwarya Pant <aishpant@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Changed the type of sz from (int) to (unsigned int) to suppress
signedness mismatch warnings of the type-

drivers/staging/rtl8188eu//core/rtw_ieee80211.c:258:97: warning:
incorrect type in argument 5 (different signedness)
drivers/staging/rtl8188eu//core/rtw_ieee80211.c:258:97:    expected
unsigned int [usertype] *frlen
drivers/staging/rtl8188eu//core/rtw_ieee80211.c:258:97:    got int
*<noident>
Signed-off-by: NAishwarya Pant <aishpant@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Changed the type of len from (int *) to (unsigned int *) in the
function rtw_get_ie(..) and wherever this function is called to
suppress signedness mismatch warnings of the type-

drivers/staging/rtl8188eu//core/rtw_ap.c:78:60: warning: incorrect type
in argument 3 (different signedness)
drivers/staging/rtl8188eu//core/rtw_ap.c:78:60:    expected int *len
drivers/staging/rtl8188eu//core/rtw_ap.c:78:60:    got unsigned int
*<noident>
Signed-off-by: NAishwarya Pant <aishpant@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The two different paths for an if statement are identical and hence
we can just replace it with the single statement.

Detected by CoverityScan, CID#1428443 ("Identical code for
different branches")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The comparison of mode >= 0 is redundant as mode is a u32 and this
is always true.  Remove this redundant code.

Detected with CoverityScan ("Unsigned compared against 0")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Gstreamer's v4l2src reacted poorly to certain outputs from the bcm2835
video driver's ioctl ops function vidioc_enum_framesizes, so a
workaround was created that could be activated by user input. This
workaround would replace the driver's ioctl ops struct with another,
similar struct--only with no function pointed to by
vidioc_enum_framesizes. With no response, gstreamer would attempt to
continue with some default settings that happened to work better.

However, this bug has been fixed in gstreamer since 2014, so we
shouldn't include this workaround in the stable version of the driver.
Signed-off-by: NKevin Wern <kevin.m.wern@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Checkpatch emits WARNING: quoted string split across lines.

Concatenate string onto single line.
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Driver SDIO code uses helper functions to do IO to the SDIO
device. Current helpers handle IO of a single byte as well as
multi-byte. Driver predominately uses single byte IO. If the
common case is made simple it simplifies the whole driver. The common
case can be made simple by splitting the multi-byte and single byte
calls into separate functions, i.e 4 functions in total, read single
byte, read multi-byte, write single byte, write multi-byte.

Also, we need to handle the debug code. Currently debug calls after
read/write fail access the IO buffer. This buffer, at best, does not hold
useful data on the error path, at worst is uninitialized and holds
garbage.

Split read/write helper functions into two functions each, one for
single byte IO and one for multi-byte IO. Fix all call sites. Do not
change the program logic.
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Checkpatch emits CHECK: Please don't use multiple blank lines.

Remove multiple blank lines.
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Checkpatch emits WARNING: please, no space before tabs.

Remove space before tabs.
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

goto label includes 'err_' suffix but is executed on non-error paths.

Remove err_ suffix from goto label.
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

SDIO code currently has a number of unneeded comments. Following
kernel coding style we do not need extraneous comments, especially on
code where it is clear what is being done. Spelling typos can be
fixed.

Remove unnecessary comments, fix typos in comments.
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

ks_sdio_card structure description does not have a kernel doc format
comment.

Add kernel doc format comment to struct ks_sdio_card.
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently driver uses a hardware information struct description to
group some SDIO related functionality (work, work queue, sdio private
data pointer). This structure is then embedded in the device private
data structure. Having nested structures described in different header
files means that to view the device private data programmers must open
two header files. This structure could be embedded anonymously in the
device private data and achieve the same result (grouping of function
specific to SDIO) without the need to open multiple headers. However,
the SDIO private data structure already has various different data and
pointers, adding the embedded structure adds little extra meaning and
lengthens all the dereferences throughout the driver, often meaning
addition line breaks and braces. We can increase readability and
reduce code complexity by moving the hardware information data and
pointers to directly be within the device private data structure
description.

While preparing for this refactoring it was noted that the identifier
currently used for the delayed work is 'rw_wq', this is confusing
since the 'wq' suffix typically means 'work queue'. This identifier
would be more meaningful if it used the suffix 'dwork' as does the
declaration of queue_delayed_work() (include/linux/workqueue.h).

The identifier for the work queue is currently 'ks7010sdio_wq'. This
identifier can be shortened without loss of meaning because there is
only one work queue within the driver. Identifier 'wq' is typical
within in-tree driver code and aptly describes the pointer.

Current pointer to the SDIO private data is identified by 'sdio_card',
this is sufficiently meaningful from within the hw_info structure but
once the hw_info_t structure is removed the pointer would be better to
have a prefix appended to it to retain the prior level of meaning.

Move members from struct hw_info_t to struct ks_wlan_private.

Rename identifiers;
struct delayed_work pointer 'rw_wq' to 'rw_dwork'.
struct workqueue_struct pointer 'ks7010sdio_wq' to 'wq'.
struct ks_sdio_card  pointer 'sdio_card' to 'ks_sdio_card'.

Remove structure description hw_info_t. Fix init/destroy calls. Fix
all call sites, SDIO private data access calls, and queuing calls.
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently a pointer to the tasklet_struct used for bottom half
processing on the receive path is within the hw_info_t structure. This
structure is then embedded in the device private data
structure. Having the tasklet_struct nested does not add meaning to
the device private data, device private data already (and typically)
has various data relating to the device, there is no real need to
separate the tasklet_struct to a SDIO specific structure. While not
adding allot of extra meaning having the nested structure means the
programmer must open two header files to read the description of the
device private data, the code would be easier to read if the device
private data struct description was not spread over two files.

Move tasklet_struct out of sdio header file and into the device
private data structure description.
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

struct work_struct uses identifier ks_wlan_wakeup_task, this is
confusing because the 'task' suffix implies that this is a
tasklet_struct instead of a work struct. Suffix 'work' would be more
clear. The code would be easier to read if it followed the principle
of least surprise and used the 'work' suffix for a work_struct
identifier.

Rename work_struct structure 'ks_wlan_wakeup_task' to 'wakeup_work'.
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

SDIO header file does not use kernel doc format struct
comments. Adding them aids readability and enables documentation to be
built from the source code. Other comments may be tidied up as we do this.

Add kernel format struct comments. Tidy up comments.
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

complete_handler() takes void * types as parameters. void * parameters are then
cast to struct types. Call sites for this function either pass in NULL
or pointers to the struct types cast to void *. This casting is
unnecessary and can be removed.

Struct tx_device_buffer (which contains a pointer member to the
complete_handler() function) has as member 'ks_wlan_priv *priv' this is
unnecessary, we always have a pointer to this struct there is no need
to store it here.

The complete_handler can be more clearly defined by using struct
pointer types instead of void * types. The code is currently
unnecessarily complex, storing and passing extraneous pointer
parameters.

Remove unnecessary parameters, unnecessary casting to/from 'void
*'. Fix all call sites involving complete_handler().
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Header has multiple constants defined using preprocessor
directive. In the cases where these are an integer progression an
enumeration type can be used. Doing so adds documentation to the code
and makes the usage explicit. Maintain original constant value, this
value is returned by the device.

Replace (integer progression) preprocessor constants with enumeration
type.
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

SDIO header currently defines unused constants READ_STATUS_BUSY and
WRITE_STATUS_IDLE. There are reciprocal constants that are used
READ_STATUS_IDLE and WRITE_STATUS_BUSY. We can roll these into a
single enumeration type and remove the two that are unused.

Add enumeration type containing IDLE/BUSY pair that are currently used
within the SDIO source. Change source to use new enum types.
Signed-off-by: NTobin C. Harding <me@tobin.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

$ make includecheck | grep staging
./drivers/staging/greybus/uart.c: linux/serial.h is included more than once.
Signed-off-by: NDarryl T. Agostinelli <dagostinelli@gmail.com>
Reviewed-by: NAlex Elder <elder@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes:
$ make versioncheck | grep staging
./drivers/staging/greybus/light.c: 15 linux/version.h not needed.
Signed-off-by: NDarryl T. Agostinelli <dagostinelli@gmail.com>
Reviewed-by: NRui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: NAlex Elder <elder@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The struct lu_dirpage elements in lustre_idl.h file are modified to
__le64 and __le32 types since the  elements are always converted from
litte endian to processor native format in mdc_request.c file.

Following warnings are removed by this fix.

drivers/staging/lustre/lustre/mdc/mdc_request.c:958:42: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:959:42: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:962:42: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:963:42: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:985:50: warning: cast to restricted __le32
drivers/staging/lustre/lustre/mdc/mdc_request.c:1193:24: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:1328:25: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:1329:23: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:1332:25: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:1333:23: warning: cast to restricted __le64
Signed-off-by: NSkanda Guruanand <skanda.kashyap@gmail.com>
Reviewed-by: NAndreas Dilger <andreas.dilger@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This resolves a checkpatch warning that "Single statement macros should
not use a do {} while (0) loop" by removing the loop and adjusting line
length accordingly.
Signed-off-by: NCraig Inches <Craig@craiginches.com>
Reviewed-by: NAndreas Dilger <andreas.dilger@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The cport_quiesce() method is mandatory in the case of
the es2 Greybus hd controller to shutdown the cports on
the es2 controller.
In order to add support of another controller which may not
need to shutdown its cports, make the cport_quiesce() optional,
and check if the controller implement it before to use it.
Signed-off-by: NAlexandre Bailon <abailon@baylibre.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The Makefile / Kconfig currently controlling compilation of this code is:

clock/Makefile:obj-$(CONFIG_INTEL_ATOMISP)     += vlv2_plat_clock.o

atomisp/Kconfig:menuconfig INTEL_ATOMISP
atomisp/Kconfig:        bool "Enable support to Intel MIPI camera drivers"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

Since module_init was already not in use by this driver, the init
ordering remains unchanged with this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Cox <alan@linux.intel.com>
Cc: linux-media@vger.kernel.org
Cc: devel@driverdev.osuosl.org
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This removes a strange 'list' file in
drivers/staging/media/atomisp/pci/atomisp2/ that was not being used for
anything.

Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Previous patches deleted files, but the Makefile still referenced their
.o files.  Fix this up by removing them in the Makefile.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

While calculating the compensation of the humidity there are negative values
interpreted as unsigned because of unsigned variables used.  These values as
well as the constants need to be casted to signed as indicated by the
documentation of the sensor.
Signed-off-by: NAndreas Klinger <ak@it-klinger.de>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: NMatt Ranostay <matt.ranostay@konsulko.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

APDS9960 can safely force runtime suspend if the system wants
to enter system-wide suspend
Signed-off-by: NMatt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Add support for STMicroelectronics STM32 DAC. It's a 12-bit, voltage
output digital-to-analog converter. It has two output channels, each
with its own converter.
It supports 8 bits or 12bits left/right aligned data format. Only
12bits right-aligned is used here. It has built-in noise or
triangle waveform generator, and supports external triggers for
conversions.
Each channel can be used independently, with separate trigger, then
separate IIO devices are used to handle this. Core driver is intended
to share common resources such as clock, reset, reference voltage and
registers.
Signed-off-by: NFabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Document STMicroelectronics STM32 DAC (digital-to-analog converter).
Signed-off-by: NFabrice Gasnier <fabrice.gasnier@st.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Fixed a brace coding style issue.
Signed-off-by: NRené Hickersberger <renehickersberger@gmx.net>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Simplify st_lsm6dsx_of_get_drdy_pin routine since of_property_read_u32
error conditions are already managed in st_lsm6dsx_get_drdy_reg()
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This fixes the coding style issue of using (S_IWUSR | S_IRUGO) in place of
4-digit octal numbers.
Signed-off-by: NChen Guanqiao <chen.chenchacha@foxmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This device operates in DIRECT_MODE and BUFFER_HARDWARE mode.
Replace usages of iio_dev->mlock with iio_device_{claim|release}_direct_mode()
helper functions to guarantee DIRECT mode and consequently protect
BUFFER mode too.

Add and use a device private lock to protect against conflicting access of the
state data.
This helps with IIO subsystem redefining iio_dev->mlock to be used by
the IIO core only for protecting device operating mode changes.
ie. Changes between INDIO_DIRECT_MODE, INDIO_BUFFER_* modes.

Protect changing of attributes inside ad5933_store(). Attributes
can no longer be changed while in buffered mode.

Remove lock from ad5933_work() because buffer mode should be enabled
when we reach this, and claiming DIRECT mode in all the other places
should protect it.
Signed-off-by: NNarcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>