Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 30 5月, 2014 4 次提交
    • A
      KVM: PPC: Add CAP to indicate hcall fixes · f2e91042
      由 Alexander Graf 提交于 
      We worked around some nasty KVM magic page hcall breakages:

  1) NX bit not honored, so ignore NX when we detect it
  2) LE guests swizzle hypercall instruction

Without these fixes in place, there's no way it would make sense to expose kvm
hypercalls to a guest. Chances are immensely high it would trip over and break.

So add a new CAP that gives user space a hint that we have workarounds for the
bugs above in place. It can use those as hint to disable PV hypercalls when
the guest CPU is anything POWER7 or higher and the host does not have fixes
in place.
Signed-off-by: NAlexander Graf <agraf@suse.de>
      f2e91042
    • A
      KVM: PPC: Disable NX for old magic page using guests · f3383cf8
      由 Alexander Graf 提交于 
      Old guests try to use the magic page, but map their trampoline code inside
of an NX region.

Since we can't fix those old kernels, try to detect whether the guest is sane
or not. If not, just disable NX functionality in KVM so that old guests at
least work at all. For newer guests, add a bit that we can set to keep NX
functionality available.
Signed-off-by: NAlexander Graf <agraf@suse.de>
      f3383cf8
    • A
      KVM: PPC: Make shared struct aka magic page guest endian · 5deb8e7a
      由 Alexander Graf 提交于 
      The shared (magic) page is a data structure that contains often used
supervisor privileged SPRs accessible via memory to the user to reduce
the number of exits we have to take to read/write them.

When we actually share this structure with the guest we have to maintain
it in guest endianness, because some of the patch tricks only work with
native endian load/store operations.

Since we only share the structure with either host or guest in little
endian on book3s_64 pr mode, we don't have to worry about booke or book3s hv.

For booke, the shared struct stays big endian. For book3s_64 hv we maintain
the struct in host native endian, since it never gets shared with the guest.

For book3s_64 pr we introduce a variable that tells us which endianness the
shared struct is in and route every access to it through helper inline
functions that evaluate this variable.
Signed-off-by: NAlexander Graf <agraf@suse.de>
      5deb8e7a
    • A
      KVM: PPC: PR: Fill pvinfo hcall instructions in big endian · 2743103f
      由 Alexander Graf 提交于 
      We expose a blob of hypercall instructions to user space that it gives to
the guest via device tree again. That blob should contain a stream of
instructions necessary to do a hypercall in big endian, as it just gets
passed into the guest and old guests use them straight away.
Signed-off-by: NAlexander Graf <agraf@suse.de>
      2743103f
  3. 27 1月, 2014 2 次提交
    • S
      kvm/ppc: IRQ disabling cleanup · 6c85f52b
      由 Scott Wood 提交于 
      Simplify the handling of lazy EE by going directly from fully-enabled
to hard-disabled.  This replaces the lazy_irq_pending() check
(including its misplaced kvm_guest_exit() call).

As suggested by Tiejun Chen, move the interrupt disabling into
kvmppc_prepare_to_enter() rather than have each caller do it.  Also
move the IRQ enabling on heavyweight exit into
kvmppc_prepare_to_enter().
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>
      6c85f52b
    • C
      KVM: PPC: Book3S: MMIO emulation support for little endian guests · 73601775
      由 Cédric Le Goater 提交于 
      MMIO emulation reads the last instruction executed by the guest
and then emulates. If the guest is running in Little Endian order,
or more generally in a different endian order of the host, the
instruction needs to be byte-swapped before being emulated.

This patch adds a helper routine which tests the endian order of
the host and the guest in order to decide whether a byteswap is
needed or not. It is then used to byteswap the last instruction
of the guest in the endian order of the host before MMIO emulation
is performed.

Finally, kvmppc_handle_load() of kvmppc_handle_store() are modified
to reverse the endianness of the MMIO if required.
Signed-off-by: NCédric Le Goater <clg@fr.ibm.com>
[agraf: add booke handling]
Signed-off-by: NAlexander Graf <agraf@suse.de>
      73601775
  5. 09 1月, 2014 1 次提交
  7. 18 10月, 2013 2 次提交
  9. 17 10月, 2013 4 次提交
  11. 04 9月, 2013 1 次提交
  13. 18 7月, 2013 1 次提交
  15. 11 7月, 2013 1 次提交
  17. 02 5月, 2013 2 次提交
  19. 27 4月, 2013 6 次提交
  21. 17 4月, 2013 1 次提交
  23. 22 3月, 2013 1 次提交
  25. 05 3月, 2013 3 次提交
  27. 10 1月, 2013 2 次提交
    • A
      KVM: PPC: BookE: Implement EPR exit · 1c810636
      由 Alexander Graf 提交于 
      The External Proxy Facility in FSL BookE chips allows the interrupt
controller to automatically acknowledge an interrupt as soon as a
core gets its pending external interrupt delivered.

Today, user space implements the interrupt controller, so we need to
check on it during such a cycle.

This patch implements logic for user space to enable EPR exiting,
disable EPR exiting and EPR exiting itself, so that user space can
acknowledge an interrupt when an external interrupt has successfully
been delivered into the guest vcpu.
Signed-off-by: NAlexander Graf <agraf@suse.de>
      1c810636
    • A
      KVM: PPC: Only WARN on invalid emulation · 5a33169e
      由 Alexander Graf 提交于 
      When we hit an emulation result that we didn't expect, that is an error,
but it's nothing that warrants a BUG(), because it can be guest triggered.

So instead, let's only WARN() the user that this happened.
Signed-off-by: NAlexander Graf <agraf@suse.de>
      5a33169e
  29. 14 12月, 2012 1 次提交
  31. 06 12月, 2012 2 次提交
    • P
      KVM: PPC: Book3S HV: Provide a method for userspace to read and write the HPT · a2932923
      由 Paul Mackerras 提交于 
      A new ioctl, KVM_PPC_GET_HTAB_FD, returns a file descriptor.  Reads on
this fd return the contents of the HPT (hashed page table), writes
create and/or remove entries in the HPT.  There is a new capability,
KVM_CAP_PPC_HTAB_FD, to indicate the presence of the ioctl.  The ioctl
takes an argument structure with the index of the first HPT entry to
read out and a set of flags.  The flags indicate whether the user is
intending to read or write the HPT, and whether to return all entries
or only the "bolted" entries (those with the bolted bit, 0x10, set in
the first doubleword).

This is intended for use in implementing qemu's savevm/loadvm and for
live migration.  Therefore, on reads, the first pass returns information
about all HPTEs (or all bolted HPTEs).  When the first pass reaches the
end of the HPT, it returns from the read.  Subsequent reads only return
information about HPTEs that have changed since they were last read.
A read that finds no changed HPTEs in the HPT following where the last
read finished will return 0 bytes.

The format of the data provides a simple run-length compression of the
invalid entries.  Each block of data starts with a header that indicates
the index (position in the HPT, which is just an array), the number of
valid entries starting at that index (may be zero), and the number of
invalid entries following those valid entries.  The valid entries, 16
bytes each, follow the header.  The invalid entries are not explicitly
represented.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
[agraf: fix documentation]
Signed-off-by: NAlexander Graf <agraf@suse.de>
      a2932923
    • A
      KVM: PPC: Support eventfd · 0e673fb6
      由 Alexander Graf 提交于 
      In order to support the generic eventfd infrastructure on PPC, we need
to call into the generic KVM in-kernel device mmio code.
Signed-off-by: NAlexander Graf <agraf@suse.de>
      0e673fb6
  33. 28 11月, 2012 1 次提交
  35. 06 10月, 2012 5 次提交
    • S
      KVM: PPC: set IN_GUEST_MODE before checking requests · 5bd1cf11
      由 Scott Wood 提交于 
      Avoid a race as described in the code comment.

Also remove a related smp_wmb() from booke's kvmppc_prepare_to_enter().
I can't see any reason for it, and the book3s_pr version doesn't have it.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>
      5bd1cf11
    • P
      KVM: PPC: Book3S HV: Fix updates of vcpu->cpu · a47d72f3
      由 Paul Mackerras 提交于 
      This removes the powerpc "generic" updates of vcpu->cpu in load and
put, and moves them to the various backends.

The reason is that "HV" KVM does its own sauce with that field
and the generic updates might corrupt it. The field contains the
CPU# of the -first- HW CPU of the core always for all the VCPU
threads of a core (the one that's online from a host Linux
perspective).

However, the preempt notifiers are going to be called on the
threads VCPUs when they are running (due to them sleeping on our
private waitqueue) causing unload to be called, potentially
clobbering the value.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>
      a47d72f3
    • P
      KVM: PPC: Book3S HV: Handle memory slot deletion and modification correctly · dfe49dbd
      由 Paul Mackerras 提交于 
      This adds an implementation of kvm_arch_flush_shadow_memslot for
Book3S HV, and arranges for kvmppc_core_commit_memory_region to
flush the dirty log when modifying an existing slot.  With this,
we can handle deletion and modification of memory slots.

kvm_arch_flush_shadow_memslot calls kvmppc_core_flush_memslot, which
on Book3S HV now traverses the reverse map chains to remove any HPT
(hashed page table) entries referring to pages in the memslot.  This
gets called by generic code whenever deleting a memslot or changing
the guest physical address for a memslot.

We flush the dirty log in kvmppc_core_commit_memory_region for
consistency with what x86 does.  We only need to flush when an
existing memslot is being modified, because for a new memslot the
rmap array (which stores the dirty bits) is all zero, meaning that
every page is considered clean already, and when deleting a memslot
we obviously don't care about the dirty bits any more.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>
      dfe49dbd
    • P
      KVM: PPC: Move kvm->arch.slot_phys into memslot.arch · a66b48c3
      由 Paul Mackerras 提交于 
      Now that we have an architecture-specific field in the kvm_memory_slot
structure, we can use it to store the array of page physical addresses
that we need for Book3S HV KVM on PPC970 processors.  This reduces the
size of struct kvm_arch for Book3S HV, and also reduces the size of
struct kvm_arch_memory_slot for other PPC KVM variants since the fields
in it are now only compiled in for Book3S HV.

This necessitates making the kvm_arch_create_memslot and
kvm_arch_free_memslot operations specific to each PPC KVM variant.
That in turn means that we now don't allocate the rmap arrays on
Book3S PR and Book E.

Since we now unpin pages and free the slot_phys array in
kvmppc_core_free_memslot, we no longer need to do it in
kvmppc_core_destroy_vm, since the generic code takes care to free
all the memslots when destroying a VM.

We now need the new memslot to be passed in to
kvmppc_core_prepare_memory_region, since we need to initialize its
arch.slot_phys member on Book3S HV.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>
      a66b48c3
    • B
      KVM: PPC: booke: Add watchdog emulation · f61c94bb
      由 Bharat Bhushan 提交于 
      This patch adds the watchdog emulation in KVM. The watchdog
emulation is enabled by KVM_ENABLE_CAP(KVM_CAP_PPC_BOOKE_WATCHDOG) ioctl.
The kernel timer are used for watchdog emulation and emulates
h/w watchdog state machine. On watchdog timer expiry, it exit to QEMU
if TCR.WRC is non ZERO. QEMU can reset/shutdown etc depending upon how
it is configured.
Signed-off-by: NLiu Yu <yu.liu@freescale.com>
Signed-off-by: NScott Wood <scottwood@freescale.com>
[bharat.bhushan@freescale.com: reworked patch]
Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com>
[agraf: adjust to new request framework]
Signed-off-by: NAlexander Graf <agraf@suse.de>
      f61c94bb