>From the daily build:

rtl2832.c: In function 'rtl2832_read_status':
rtl2832.c:703:12: warning: 'tmp' may be used uninitialized in this function [-Wmaybe-uninitialized]
  } else if (tmp == 10) {
            ^

The code is OK, it's just the compiler that cannot figure out what's
going on. So just init 'tmp' to 0.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/dvb-frontends/rtl2832.c:157:5: warning: no previous prototype for ‘rtl2832_bulk_write’ [-Wmissing-prototypes]
 int rtl2832_bulk_write(struct i2c_client *client, unsigned int reg,
     ^
drivers/media/dvb-frontends/rtl2832.c:169:5: warning: no previous prototype for ‘rtl2832_update_bits’ [-Wmissing-prototypes]
 int rtl2832_update_bits(struct i2c_client *client, unsigned int reg,
     ^
drivers/media/dvb-frontends/rtl2832.c:181:5: warning: no previous prototype for ‘rtl2832_bulk_read’ [-Wmissing-prototypes]
 int rtl2832_bulk_read(struct i2c_client *client, unsigned int reg, void *val,

Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Introduce own lock to silence lockdep warning. lockdep validator
makes wrong decision when two similar (&map->mutex) locks were taken
recursively, even those are different mutexes in a two different
drivers. After that patch, functionality remains same, but mutex names
are different. That is a temporary hack, proper solution is make
regmap aware of locked nested locking rules.

=============================================
[ INFO: possible recursive locking detected ]
3.18.0-rc4+ #4 Tainted: G           O
---------------------------------------------
kdvb-ad-0-fe-0/2814 is trying to acquire lock:
 (&map->mutex){+.+.+.}, at: [<ffffffff814ec90f>] regmap_lock_mutex+0x2f/0x40

but task is already holding lock:
 (&map->mutex){+.+.+.}, at: [<ffffffff814ec90f>] regmap_lock_mutex+0x2f/0x40

other info that might help us debug this:
 Possible unsafe locking scenario:
       CPU0
       ----
  lock(&map->mutex);
  lock(&map->mutex);

 *** DEADLOCK ***
 May be due to missing lock nesting notation
1 lock held by kdvb-ad-0-fe-0/2814:
 #0:  (&map->mutex){+.+.+.}, at: [<ffffffff814ec90f>] regmap_lock_mutex+0x2f/0x40

stack backtrace:
CPU: 3 PID: 2814 Comm: kdvb-ad-0-fe-0 Tainted: G           O 3.18.0-rc4+ #4
Hardware name: System manufacturer System Product Name/M5A78L-M/USB3, BIOS 2001    09/11/2014
 0000000000000000 00000000410c8772 ffff880293af3868 ffffffff817a6f82
 0000000000000000 ffff8800b3462be0 ffff880293af3968 ffffffff810e7f94
 ffff880293af3888 00000000410c8772 ffffffff82dfee60 ffffffff81ab8f89
Call Trace:
 [<ffffffff817a6f82>] dump_stack+0x4e/0x68
 [<ffffffff810e7f94>] __lock_acquire+0x1ea4/0x1f50
 [<ffffffff810e2a7d>] ? trace_hardirqs_off+0xd/0x10
 [<ffffffff817b01f3>] ? _raw_spin_lock_irqsave+0x83/0xa0
 [<ffffffff810e13e6>] ? up+0x16/0x50
 [<ffffffff810e2a7d>] ? trace_hardirqs_off+0xd/0x10
 [<ffffffff817af8bf>] ? _raw_spin_unlock_irqrestore+0x5f/0x70
 [<ffffffff810e9069>] lock_acquire+0xc9/0x170
 [<ffffffff814ec90f>] ? regmap_lock_mutex+0x2f/0x40
 [<ffffffff817ab50e>] mutex_lock_nested+0x7e/0x430
 [<ffffffff814ec90f>] ? regmap_lock_mutex+0x2f/0x40
 [<ffffffff814ec90f>] ? regmap_lock_mutex+0x2f/0x40
 [<ffffffff817a530b>] ? printk+0x70/0x86
 [<ffffffff8110d9e8>] ? mod_timer+0x168/0x240
 [<ffffffff814ec90f>] regmap_lock_mutex+0x2f/0x40
 [<ffffffff814f08d9>] regmap_update_bits+0x29/0x60
 [<ffffffffa03e9778>] rtl2832_select+0x38/0x70 [rtl2832]
 [<ffffffffa039b03d>] i2c_mux_master_xfer+0x3d/0x90 [i2c_mux]
 [<ffffffff815da493>] __i2c_transfer+0x73/0x2e0
 [<ffffffff815dbaba>] i2c_transfer+0x5a/0xc0
 [<ffffffff815dbb6e>] i2c_master_send+0x4e/0x70
 [<ffffffffa03ff25a>] regmap_i2c_write+0x1a/0x50 [regmap_i2c]
 [<ffffffff817ab713>] ? mutex_lock_nested+0x283/0x430
 [<ffffffff814f06b2>] _regmap_raw_write+0x862/0x880
 [<ffffffff814ec90f>] ? regmap_lock_mutex+0x2f/0x40
 [<ffffffff814f0744>] _regmap_bus_raw_write+0x74/0xa0
 [<ffffffff814ef3d2>] _regmap_write+0x92/0x140
 [<ffffffff814f0b7b>] regmap_write+0x4b/0x70
 [<ffffffffa032b090>] ? dvb_frontend_release+0x110/0x110 [dvb_core]
 [<ffffffffa05141d4>] e4000_init+0x34/0x210 [e4000]
 [<ffffffffa032a029>] dvb_frontend_init+0x59/0xc0 [dvb_core]
 [<ffffffff810bde30>] ? finish_task_switch+0x80/0x180
 [<ffffffff810bddf2>] ? finish_task_switch+0x42/0x180
 [<ffffffffa032b116>] dvb_frontend_thread+0x86/0x7b0 [dvb_core]
 [<ffffffff817a9203>] ? __schedule+0x343/0x930
 [<ffffffffa032b090>] ? dvb_frontend_release+0x110/0x110 [dvb_core]
 [<ffffffff810b826b>] kthread+0x10b/0x130
 [<ffffffff81020099>] ? sched_clock+0x9/0x10
 [<ffffffff810b8160>] ? kthread_create_on_node+0x250/0x250
 [<ffffffff817b063c>] ret_from_fork+0x7c/0xb0
 [<ffffffff810b8160>] ? kthread_create_on_node+0x250/0x250
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

There was 2 muxed I2C adapters, one for demod tuner bus and one for
internal use. Idea of internal I2C adapter was to force I2C repeater
close when demod access its registers. Driver has also delayed work
queue based method to close I2C repeater.

After regmap conversion internal I2C adapter based repeater close
left unused - only work queue method was in use. We could not use
internal mux adapter method with regmap as it makes recursive regmap
call, which causes deadlock as regmap has own locking. Due to that
remove whole method totally.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Put demod to soft reset in order to save power when sleep. That drops
power usage ~30mA @5V on USB dongle I tested. In real life it does
not matter much as USB IF powers off demod too, but now it is done
twice - demod and USB IF.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

I have implemented tons of things for that driver, more than anyone
else, so lets claim copyright and module authorship.

Cc: Thomas Mair <thomas.mair86@gmail.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Remove all the stuff that is not needed anymore. Rename variable.
Remove extra new lines.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Provide register read and write callbacks for SDR module.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Chips uses 8-bit register addresses with 5 pages. Extend register
address by using register page as a first byte of address, defining
virtual register addresses. That is common method of handling
register pages and regmap also uses it. Remove page + address
conversion glue which was there for regmap.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

There is no need to do software reset on init() as it is done a bit
later on end of set_frontend(). Software reset usually means
restarting (resetting to starting point) chip internal state machine
(FSM). Naturally it is done after all parameters are programmed.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Enable regmap register cache in order to reduce IO.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Implement PID filter. This demod has PID filter size of 32 PIDs.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Demod lock flags are derived from demod state machine states. States
are running from 1 to 11, where highest state 11 means demod is
fully locked and streaming. Naturally smaller state numbers means
there is some partial locks.

Define now state 10 as missing synch and lock.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

We don't need it anymore as all users are using muxed I2C adapter.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Estimate signal strength from IF digital AGC.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Change legacy DVBv3 read BER to return values calculated by DVBv5
statistics.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Change legacy DVBv3 read SNR to return values calculated by DVBv5
statistics.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

DVBv5 BER.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

DVBv5 CNR.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Use regmap to cover register access routines.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Move all needed configuration values to platform data structure
and remove old configuration code where possible.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Pass correct device pointer to dev_* logging functions in order
print logs correctly.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Rename it device state variable to dev. Both priv and dev are very
common terms for such variable in kernel, but I like use dev in
order to keep drivers consistent.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Exported resources are not needed anymore as all users are using
callbacks carried via platform data. Due to that we will remove
those.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add callback for all of those functions which are currently
exported using EXPORT_SYMBOL. That allows us convert every user to
callbacks and eventually all exported symbols could be removed.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Convert that driver to I2C driver model.
Legacy DVB binding is left also for later removal...
Tested-by: NBenjamin Larsson <benjamin@southpole.se>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Implement partial PIP mode to carry TS from slave demodulator,
through that master demodulator. RTL2832 demod has TS input
interface to connected another demodulator TS output.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Instead of using 0 or 1 for boolean, use the true/false
defines.

Also, instead of testing foo == false, just use the
simplified notation if(!foo).
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Delay possible I2C gate close a little bit in order to see if there
is next message coming to tuner in a sequence.

Also, export private muxed I2C adapter. That is aimed only for SDR
extension module as SDR belongs to same RTL2832 physical I2C bus (it
is physically property of RTL2832, whilst it is own kernel module).
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Signed-off-by: NLuis Alves <ljalvs@gmail.com>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

There was a deadlock between master I2C adapter and muxed I2C
adapter. Implement two I2C muxed I2C adapters and leave master
alone, just only for offering I2C adapter for these mux adapters.
Reported-by: NLuis Alves <ljalvs@gmail.com>
Reported-by: NBenjamin Larsson <benjamin@southpole.se>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

RTL2832 provides gated / repeater I2C adapter for tuner.
Implement it as a muxed I2C adapter.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Most of those were reported by checkpatch.pl...

debug module parameter is not used anywhere so remove it.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

All used tuners has get_if_frequency() callback and that parameter
is not needed and will not needed as all upcoming tuner drivers
should implement get_if_frequency().
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Dynamic static allocation is evil, as Kernel stack is too low, and
compilation complains about it on some archs:
	drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default]
	drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default]
	drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default]
	drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default]
	drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default]
	drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default]
	drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default]
	drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default]
	drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default]
Instead, let's enforce a limit for the buffer. Considering that I2C
transfers are generally limited, and that devices used on USB has a
max data length of 64 bytes for	the control URBs.
So, it seem safe to use 64 bytes as the hard limit for all those devices.
 On most cases, the limit is a way lower than that, but	this limit
is small enough to not affect the Kernel stack, and it is a no brain
limit, as using smaller ones would require to either carefully each
driver or to take a look on each datasheet.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
Reviewed-by: NHans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Use R820T config for R828D too as those are about same tuner.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Spectrum is inverted. So, we need to invert it when calculating the
value for the IF register
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Tested-by: NAntti Palosaari <crope@iki.fi>

DVBT_EN_BBIN should be set on both places where IF is set. So,
move it to a function and call it where needed.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Tested-by: NAntti Palosaari <crope@iki.fi>

There are some init stuff to be done for each new tuner at the
demod code. Add the code there for r820t.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Tested-by: NAntti Palosaari <crope@iki.fi>

drivers/media/dvb-frontends/rtl2832.c:268:5: warning: no previous prototype for 'rtl2832_rd_demod_reg' [-Wmissing-prototypes]
drivers/media/dvb-frontends/rtl2832.c:308:5: warning: no previous prototype for 'rtl2832_wr_demod_reg' [-Wmissing-prototypes]
drivers/media/dvb-frontends/rtl2832.c:513:5: warning: no previous prototype for 'rtl2832_get_tune_settings' [-Wmissing-prototypes]
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>