Move the panel/encoder driver compatible-string converter from
arch/arm/mach-omap2/display.c to omapdss driver. That is a more logical
place for it, as it's really an omapdss internal hack.

The code is rewritten to follow the video node graph, starting from
omapdss. This removes the need to have the device compatible-string
database.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

devm_ioremap_resource returns ERR_PTR on error, not NULL. Fix the
error checks in the driver.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Remove some unused defines from the HDMI driver.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Commit 59b3d38a missed cleaning up the
hdmi_wp.c file.

Clean up hdmi_wp.c the same way as the others.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

We don't have any working boards using this panel right now, and the
panel driver looks odd compared to the panel specs. For example, the
panel spec does not mention any QVGA pin.

So, while this patch adds DT support to the driver, it's not really
supported and there are not bindings documentation for the panel until
someone can verify how the panel actually works.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Erik Gilling <konkers@android.com>

Add DT binding documentation for TPO td043mtea1 panel
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Cc: devicetree@vger.kernel.org
Cc: Grazvydas Ignotas <notasas@gmail.com>

Add DT support for panel TPO-TD043MTEA1.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Grazvydas Ignotas <notasas@gmail.com>

Add DT binding documentation for SHARP LS037V7DW01 panel.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Cc: devicetree@vger.kernel.org

Add DT support for sharp-ls037v7dw01.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Using gpiod will make it easier to add device tree support
for this panel in the following patches.

Note that all the GPIOs for this panel are optional, any
of the the GPIOs could be configured with external pulls
instead of GPIOs, so let's not error out if GPIOs are not
found to make the panel more generic.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Add DT bindings documentation for LG.Philips LB035Q02 LCD panel.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Cc: devicetree@vger.kernel.org

Add DT support for panel-lgphilips-lb035q02.

We disable the use of the backlight_gpio as it should be handled via
backlight framework with DT boots.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: NFlorian Vaussard <florian.vaussard@epfl.ch>

The new gpiod API supports automatic handling of active-high/active-low
with DT. To make it possible to use that when booting with DT, change
the driver's handling of the enable GPIO to use gpiod.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Use correct variable name for base address.
Signed-off-by: NJyri Sarha <jsarha@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The enable gpio should be optional, but the driver returns an error if
it doesn't get the gpio.

So change the driver to accept -ENOENT error.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: NJoachim Eastwood <manabian@gmail.com>

When omapdss writes to DISPC_POL_FREQ register, it always ORs the bits
with the current contents of the register, never clearing the old ones,
causing wrong signal polarity settings.

As we write all the bits in DISPC_POL_FREQ, we don't need to care about
the current contents of the register. So fix the issue by constructing
new register value from scratch.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Add DT binding documentation for OMAP5 Display Subsystem.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Cc: devicetree@vger.kernel.org

Now that all the boards using OMAP HDMI are using DT boot, we can remove
the hacks for getting the ioresources with non-DT boot.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

This adds a new driver to omapdss for OMAP5 HDMI. However, the new
driver uses common HDMI files which are shared with OMAP4 HDMI driver.

OMAP5 HDMI has a different HDMI core IP compared to OMAP4, but has very
similar PLL and PHY IPs which can be handled with common code.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Add a features struct to differentiate between the HDMI PLLs on OMAP4
and OMAP5. The OMAP5 PLL is more sensitive when it comes to locking.  We
need to ensure that the DCO freq isn't too low for lower pixel clocks.

Modify the PLL computation slightly to ensure the HDMI PLL locks for lower
frequencies. This will be later replaced by a more complex computation
which makes sure all the PLL constraints are met.
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

OMAP5 HDMI PHY has some differences compared to OMAP4 HDMI PHY. This
patch creates a features struct which help the driver configure the PHY
based on what SoC it is.

Some of the features aren't currenlty used, but will come in use later.
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The HDMI core IP on OMAP5 has a wider address range for registers. The offsets
for the later registers can't fit into the u16 type currently used for hdmi
register read and write functions. Use u32 for offsets instead.
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

HDMI IRQ handling was moved into hdmi_phy.c when restructuring the HDMI
driver. While this worked fine, it's not correct.

The HDMI IRQ handling should be either in the hdmi_wp, or in the main
hdmi driver. This patch moves the handling to the main hdmi driver, as I
feel it's a more appropriate choice.

This move also requires changing the handling of the PHY power, as that
was partly handled in the IRQ handler. The PHY power is handled via the
WP module. An option would be to give HDMI PHY driver function pointers
that it could use to manage the PHY power, but as the PHY power is not
needed to access the PHY registers, the handling was also moved to the
main HDMI driver. This could be changed later if need be.

Note that there's slightly similar power issue with the PLL: the HDMI
PLLs power is also handled via the WP module. For now, the PLL power
handling is still done inside the PLL driver.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

We'll soon add support for OMAP5 HDMI, which uses some of the same files
as OMAP4 HDMI does.

This patch adds a new config entry "OMAP2_DSS_HDMI_COMMON", which both
OMAP4 and OMAP5 HDMI config entries can select. OMAP2_DSS_HDMI_COMMON
will cause the common HDMI files to be compiled.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Add OMAP5 DSI module ID support to the OMAP DSI driver.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

At the moment the dpi driver does not handle LCD3 clock source at all.

LCD3 channel gets the DSI PLL clock from DSI2 instance. Add support for
LCD3's clock source in the dpi driver.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

OMAP5 has LCD3 overlay manager, and total 4 overlay managers. These are
not correctly defined in the dss features. Fix them.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Add omap5 entries to dispc's and dss's of_device_id tables.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Add detection of omap5-dss nodes so that the related devices get
initialized.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Add DSS features for AM43xx.
Signed-off-by: NSathya Prakash M R <sathyap@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Macros to_dss_driver() and to_dss_device() are no longer used, and the
latter doesn't even work. Remove them.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The use of venc_panel.c was removed in
09d2e7cd (OMAPDSS: VENC: remove code
related to old panel model), but the file itself was left behind. Remove
the unused file.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The support for simpler port/endpoint binding was removed in the merged version
of omapdss DT. But dss_init_ports still tries to get to an endpoint even if no
port exists. Remove this as this doesn't work.
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

dss_uninit_ports is only called by __exit omap_dsshw_remove

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-omap@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

If LPAE is enabled, dma_addr_t is 64 bit, so we have to
change a few type for everything in this driver to match
again.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NPeter Griffin <peter.griffin@linaro.org>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Add module alias string to make it working when panel is compiled as module.
Without this change panel module is not probed thus display is not working.
Signed-off-by: NMarek Belisko <marek@goldelico.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Signed-off-by: NMarek Belisko <marek@goldelico.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Set the DSI vdd regulator voltage to the required 1.8V.

This is required for the case when the regulator in the DT data defines
a range of allowed voltages. In this case it's required to set the
voltage, as otherwise enabling the voltage fails.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Set the HDMI vdda regulator voltage to the required 1.8V.

This is required for the case when the regulator in the DT data defines
a range of allowed voltages. In this case it's required to set the
voltage, as otherwise enabling the voltage fails.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Add documentation for defining HDMI lane functions and polarities.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Cc: devicetree@vger.kernel.org