- 12 7月, 2019 40 次提交
-
-
由 Janusz Krzysztofik 提交于
Use the "_probe" nomenclature not only in i915_driver_probe() helper name but also in other related function / variable names for consistency. Only the userspace exposed name of a related module parameter is left untouched. Signed-off-by: NJanusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190712112429.740-4-janusz.krzysztofik@linux.intel.com
-
由 Janusz Krzysztofik 提交于
Current names of i915_driver_load/unload() functions originate in legacy DRM stubs. Reduce nomenclature ambiguity by renaming them to match their current use as helpers called from PCI entry points. Suggested by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NJanusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190712112429.740-3-janusz.krzysztofik@linux.intel.com
-
由 Janusz Krzysztofik 提交于
Follow dim checkpatch recommendation so it doesn't complain on that now and again on header file modifications. v2: drop testing leftover (Chris) Signed-off-by: NJanusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190712112429.740-2-janusz.krzysztofik@linux.intel.com
-
由 Chris Wilson 提交于
We can simplify our gtt walking code by comparing against NULL for scratch entries as opposed to looking up the distinct per-level scratch pointer. The only caveat is to remember to protect external parties and map the NULL to the scratch top pd. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190712094327.24437-6-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
Each level has its own scratch. Make the levels more obvious by forgoing the fancy similarly names and replace them with a number. 0 is the bottom most level, the physical page used for actual data; 1+ are the page directories. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190712094327.24437-5-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
The radix levels of each page directory are easily determined so replace the numerous hardcoded constants with precomputed derived constants. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190712094327.24437-4-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
This will be useful to consolidate recursive code. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190712094327.24437-3-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
In preparation for refactoring the free/clear/alloc, first move the code around so that we can avoid forward declarations in the next set of patches. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190712094327.24437-2-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
The page directory extends the page table with the shadow entries. Make the page directory struct embed the page table for easier code reuse. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190712094327.24437-1-chris@chris-wilson.co.uk
-
由 Chris Wilson 提交于
We only use the dma pages for scratch, and so do not need to allocate the extra storage for the shadow page directory. v2: Refrain from reintroducing I915_PDES Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190712075818.20616-1-chris@chris-wilson.co.uk
-
由 John Harrison 提交于
There is a debug message in the workaround initialisation path that reports how many entries were added of each type. However, whitelist workarounds exist for multiple engines but the type name is just 'whitelist'. Tvrtko suggested adding the engine name to make the message more useful. v2: Updated the similar message in the workaround reset selftest. Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com> CC: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190712070745.35239-4-John.C.Harrison@Intel.com
-
由 John Harrison 提交于
Newer hardware supports extra feature in the whitelist registers. This patch updates the selftest to test that entries marked as read only are actually read only. v2: Removed all use of 'rsvd' for read-only registers to avoid ambiguous code or error messages. Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com> CC: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190712070745.35239-3-John.C.Harrison@Intel.com
-
由 John Harrison 提交于
As per review feedback by Tvrtko, added a check that no invalid bits are being set in the whitelist flags fields. Also updated the read/write access definitions to make it clearer that they are an enum field not a set of single bit flags. Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com> CC: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190712070745.35239-2-John.C.Harrison@Intel.com
-
由 José Roberto de Souza 提交于
This register definition changed from ICL and has now another meaning. Use the right bits on TGL. Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-22-lucas.demarchi@intel.com
-
由 Lucas De Marchi 提交于
On TGL the port programming for combophy is very similar to ICL, so adapt the callers to possibly use the different register values. v2 (Lucas): Add TODO with about DPLL4 (requested by Ville) Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-21-lucas.demarchi@intel.com
-
由 Mahesh Kumar 提交于
Add VBT-value to DDC bus pin mapping for the same. Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-20-lucas.demarchi@intel.com
-
由 Lucas De Marchi 提交于
Make the icl function generic so it is based on phy type and can be applied to tgl as well. I checked if this could not apply to EHL as well, but unfortunately there the HPD and DDC/GMBUS pins for DDI C are mapped to TypeC Port 1 even though it doesn't have TC phy. v2: don't add a separate function for TGL, but rather reuse the ICL one (suggested by Rodrigo) v3: rebase after the introduction of enum phy and use it for the conversions Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: NMatt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-19-lucas.demarchi@intel.com
-
由 Mahesh Kumar 提交于
Add default GPIO pin mapping for all ports. Tiger Lake has 3 combophy ports and 6 TC ports, gpio pin1-3 are mapped to combophy & pin9-14 are mapped to TC ports. Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-18-lucas.demarchi@intel.com
-
由 Rodrigo Vivi 提交于
Previously, the recommended B credit for all platforms was 24 / number of pipes, which would give 6 for newer platforms with 4 pipes. However 6 is not enough and we need 12 on these cases. We also need a different BW credit for these platforms. Cc: Arthur J Runyan <arthur.j.runyan@intel.com> Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-17-lucas.demarchi@intel.com
-
由 Lucas De Marchi 提交于
Add port C to workaround to cover Tiger Lake. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190708231629.9296-22-lucas.demarchi@intel.comReviewed-by: NMatt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711213517.13674-1-lucas.demarchi@intel.com
-
由 Mahesh Kumar 提交于
This patch initializes DDI PORT A, B & C for Tiger lake. Other TC ports need to be initialized later once corresponding code is there. Cc: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-15-lucas.demarchi@intel.com
-
由 Lucas De Marchi 提交于
Tiger Lake has up to 3 combo phys and 6 TC phys. Extend the helper conversion functions from port to phy. Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: NMatt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-14-lucas.demarchi@intel.com
-
由 Vandita Kulkarni 提交于
There are 2 new additional typeC ports in Tiger Lake and PORT-C is now a combophy port. This results in 6 typeC ports and 3 combophy ports. These 6 TC ports can be DP alternate mode, DP over thunderbolt, native DP on legacy DP connector or native HDMI on legacy connector. v2: Rebase on new modular FIA code (Lucas) v3: Also add new port in port_identifier(), even though it can't possibly be used there (requested by José) v4: Add conversion port->tc_port in helper function after introction of phy namespace (Lucas) Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: NVandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: NMatt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-13-lucas.demarchi@intel.com
-
由 Vandita Kulkarni 提交于
Add a new pll array for Tiger Lake. The TC pll functions for type C will be covered in later patches after its phy is implemented. Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: NVandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-12-lucas.demarchi@intel.com
-
由 Vandita Kulkarni 提交于
Add 2 new PLLs for additional TC ports. The names for the PLLs on TGL changed, but most registers remained the same, like MGPLL5_ENABLE, MGPLL6_ENABLE. So continue to use the name from ICL. Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: NVandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-11-lucas.demarchi@intel.com
-
由 Mika Kahola 提交于
Add power well 5 to support 4th pipe and transcoder on TGL. Cc: James Ausmus <james.ausmus@intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: NMika Kahola <mika.kahola@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-10-lucas.demarchi@intel.com
-
由 Imre Deak 提交于
The patch adds the new power wells introduced by TGL (GEN 12) and maps these to existing/new power domains. The changes for GEN 12 wrt to GEN 11 are the following: - Transcoder#EDP removed from power well#1 (Transcoder#A used in low-power mode instead) - Transcoder#A is now backed by power well#1 instead of power well#3 - The DDI#B/C combo PHY ports are now backed by power well#1 instead of power well#3 - New power well#5 added for pipe#D functionality (TODO) - 2 additional TC ports (TC#5-6) backed by power well#3, 2 port specific IO power wells (only for the non-TBT modes) and 4 port specific AUX power wells (2-2 for TBT vs. non-TBT modes) - Power well#2 backs now VDSC/joining for pipe#A instead of VDSC for eDP and MIPI DSI (TODO) On TGL Port DDI#C changed to be a combo PHY (native DP/HDMI) and BSpec has renamed ports DDI#D-F to TC#4-6 respectively. Thus on ICL we have the following naming for ports: - Combo PHYs (native DP/HDMI): DDI#A-B - TBT/non-TBT (TC altmode, native DP/HDMI) PHYs: DDI#C-F Starting from GEN 12 we have the following naming for ports: - Combo PHYs (native DP/HDMI): DDI#A-C - TBT/non-TBT (TC altmode, native DP/HDMI) PHYs: DDI TC#1-6 To save some space in the power domain enum the power domain naming in the driver reflects the above change, that is power domains TC#1-3 are added as aliases for DDI#D-F and new power domains are reserved for TC#4-6. v2 (Lucas): - Separate out the bits and definitions for TGL from the ICL ones. Fix use of TRANSCODER_EDP_VDSC, that is now the correct define since we don't define TRANSCODER_A_VDSC power domain to spare a one bit in the bitmask (suggested by Ville) v3 (Lucas): - Fix missing squashes on v2 - Rebase on renamed TRANSCODER_EDP_VDSC Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: NImre Deak <imre.deak@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-9-lucas.demarchi@intel.com
-
由 José Roberto de Souza 提交于
On TGL the special EDP transcoder is gone and it should be handled by transcoder A. v2 (Lucas): - Reuse POWER_DOMAIN_TRANSCODER_EDP_VDSC (suggested by Ville) - Use crtc->dev since new_crtc_state->state may be NULL on atomic commit (suggested by Maarten) v3 (Lucas): - Rename power domain so it's clear it can also be used for transcoder A in TGL (requested by José and Manasi) Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Acked-by: NJosé Roberto de Souza <jose.souza@intel.com> Reviewed-by: NManasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-8-lucas.demarchi@intel.com
-
由 José Roberto de Souza 提交于
On Tiger Lake there is one more pipe - check if it's fused. Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: NMika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-7-lucas.demarchi@intel.com
-
由 Lucas De Marchi 提交于
Current list of PCI IDs for Tiger Lake. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: NMika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-6-lucas.demarchi@intel.com
-
由 Mahesh Kumar 提交于
Assume PCH_TGP when platform is TGL. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-5-lucas.demarchi@intel.com
-
由 Radhakrishna Sripada 提交于
Add the enum additions to TGP. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: David Weinehall <david.weinehall@intel.com> Cc: James Ausmus <james.ausmus@intel.com> Signed-off-by: NRadhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-4-lucas.demarchi@intel.com
-
由 Daniele Ceraolo Spurio 提交于
Tiger Lake is a Intel® Processor containing Intel® HD Graphics. This is just an initial Tiger Lake definition. PCI IDs, generic support and new features coming in following patches. v2 (Lucas): - Remove modular FIA - feature will be re-introduced in future Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-3-lucas.demarchi@intel.com
-
由 Lucas De Marchi 提交于
Add pipe D and transcoder D to prepare for platforms having them. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711173115.28296-2-lucas.demarchi@intel.com
-
由 Ville Syrjälä 提交于
With 4:2:0 output the LS clock can be half of what it is with 4:4:4. Make that happen. Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190710125851.3275-1-ville.syrjala@linux.intel.comReviewed-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com> Tested-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
-
由 Steven Rostedt (VMware) 提交于
Currently the intel_update_plane and intel_disable_plane tracepoints record the address of plane->name in the ring buffer, and then when reading the ring buffer uses %s to get the name. The issue with this, is that those two events can be minutes, hours or even days apart. It is very dangerous to dereference a string pointer without knowing if it still exists or not. The proper way to handle this is to use the __string() macro in the tracepoint which will save the string into the ring buffer at the time of recording. Then there's no worries if the original string still exists in memory when the ring buffer is read. Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org> [vsyrjala: Rebase on top of drm-tip] Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190710171230.7471-1-ville.syrjala@linux.intel.com
-
由 Chris Wilson 提交于
drivers/gpu/drm/i915/intel_guc_submission.c:799: warning: Excess function parameter 'ctx' description in 'guc_client_alloc' Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190711162415.2938-1-chris@chris-wilson.co.uk
-
由 Ville Syrjälä 提交于
Zero initialize val2 so that we don't pass stack garbage to the pcode qgv read command. I suspect in this case pcode just ignores the initial value in that registers, but better safe than sorry. Cc: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190710134937.25835-1-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Ville Syrjälä 提交于
Make life less annoying by favoring the intel_ types over the drm_ types in intel_atomic_commit(). Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190701160550.24205-6-ville.syrjala@linux.intel.comReviewed-by: NImre Deak <imre.deak@intel.com>
-
由 Ville Syrjälä 提交于
Streamline the code a bit by using intel_ types instead of the drm_ types. Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190701160550.24205-5-ville.syrjala@linux.intel.comReviewed-by: NImre Deak <imre.deak@intel.com>
-