- 16 11月, 2016 12 次提交
-
-
When processing ECN via the prescan_rxq path, some fields in the packet structure are passed uninitialized. This can potentially cause NULL pointer exceptions during ECN handling. Reviewed-by: NIra Weiny <ira.weiny@intel.com> Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Jakub Pawlak 提交于
Set the status code BAD_L2 when unsupported type of packet is received and dropped. Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NJakub Pawlak <jakub.pawlak@intel.com> Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Krzysztof Blaszkowski 提交于
Validate the rcvhdrcnt module parameter in a single function at module load time. This allows proper error reporting. Reviewed-by: NDean Luick <dean.luick@intel.com> Signed-off-by: NKrzysztof Blaszkowski <krzysztof.blaszkowski@intel.com> Signed-off-by: NTymoteusz Kielan <tymoteusz.kielan@intel.com> Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Ira Weiny 提交于
The new s_rnr_timeout was not properly being set and the code was incorrectly setting a different timer. Found by code inspection. Cc: <stable@vger.kernel.org> # 4.7.x Fixes: 08279d5c ("staging/rdma/hfi1: use new RNR timer") Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NIra Weiny <ira.weiny@intel.com> Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Easwar Hariharan 提交于
The lock is an unused vestige from qib. Remove it. Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NEaswar Hariharan <easwar.hariharan@intel.com> Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Easwar Hariharan 提交于
hfi1_pcie_ddinit takes the PCI device id as an argument but never uses it. Clean it up. Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NEaswar Hariharan <easwar.hariharan@intel.com> Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Dennis Dalessandro 提交于
A few snoop related variables were missed in the snoop/capture removal to get out of staging. Go back and clean those up too. Reviewed-by: NDean Luick <dean.luick@intel.com> Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Jianxin Xiong 提交于
In the function hfi1_create_ctxts the array "dd->rcd" is allocated and then populated with allocated resources in a loop. Previously, if error happened during the loop, only resource allocated in the current iteration would be freed. The array itself would then be freed, leaving the resources that were allocated in previous iterations and referenced by the array elements in limbo. This patch makes sure all allocated resources are freed before freeing the array "dd->rcd". Also the resource allocation now takes account of the numa node the device is attached to. Reviewed-by: NTadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: NJianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Krzysztof Blaszkowski 提交于
Clean up device type checking. Reviewed-by: NDean Luick <dean.luick@intel.com> Signed-off-by: NKrzysztof Blaszkowski <krzysztof.blaszkowski@intel.com> Signed-off-by: NTymoteusz Kielan <tymoteusz.kielan@intel.com> Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Tadeusz Struk 提交于
This patch fixes an Oops on device unbind, when the device is used by a PSM user process. PSM processes access device resources which are freed on device removal. Similar protection exists in uverbs in ib_core for Verbs clients, but PSM doesn't use ib_uverbs hence a separate protection is required for PSM clients. Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Reviewed-by: NDean Luick <dean.luick@intel.com> Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Jakub Pawlak 提交于
Prevent setting up integrity check flags when module is loaded with NO_INTEGRITY capability. Reviewed-by: NDean Luick <dean.luick@intel.com> Signed-off-by: NJakub Pawlak <jakub.pawlak@intel.com> Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Tadeusz Struk 提交于
The IRQ affinity entry is not needed after the irq notifier patch has been added to the hfi1 driver. The irq affinity settings for SDMA engine should be set using the standard /proc/irq/<N>/ interface. Reviewed-by: NJianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 19 10月, 2016 1 次提交
-
-
由 Lorenzo Stoakes 提交于
This removes the 'write' and 'force' from get_user_pages() and replaces them with 'gup_flags' to make the use of FOLL_FORCE explicit in callers as use of this flag can result in surprising behaviour (and hence bugs) within the mm subsystem. Signed-off-by: NLorenzo Stoakes <lstoakes@gmail.com> Acked-by: NChristian König <christian.koenig@amd.com> Acked-by: NJesper Nilsson <jesper.nilsson@axis.com> Acked-by: NMichal Hocko <mhocko@suse.com> Reviewed-by: NJan Kara <jack@suse.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 10月, 2016 10 次提交
-
-
由 Ram Amrani 提交于
Add error handling support. Register ib device with ib stack. Signed-off-by: NRajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Ram Amrani 提交于
Add support for GSI over light L2. Signed-off-by: NRajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Ram Amrani 提交于
Add light L2 interface for RoCE. Signed-off-by: NRajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Ram Amrani 提交于
Implement fastpath verbs like ib_send_post, ib_post_recv and ib_poll_cq. Signed-off-by: NRajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Ram Amrani 提交于
Add support for user, dma and memory regions registration. Signed-off-by: NRajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Ram Amrani 提交于
Add support for Queue Pair verbs which adds, deletes, modifies and queries Queue Pairs. Signed-off-by: NRajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Ram Amrani 提交于
Add support for protection domain and completion queue verbs. Signed-off-by: NRajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Ram Amrani 提交于
Add support for ucontext, query port, add and del gid verbs. Signed-off-by: NRajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Ram Amrani 提交于
Allocate and setup RoCE resources, interrupts and completion queues. Adds device attributes. Signed-off-by: NRajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Ram Amrani 提交于
Adds a skeletal implementation of the qed* RoCE driver - basically the ability to communicate with the qede driver and receive notifications from it regarding various init/exit events. Signed-off-by: NRajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 08 10月, 2016 17 次提交
-
-
由 Steve Wise 提交于
When processing a REG_MR work request, if fw supports the FW_RI_NSMR_TPTE_WR work request, and if the page list for this registration is <= 2 pages, and the current state of the mr is INVALID, then use FW_RI_NSMR_TPTE_WR to pass down a fully populated TPTE for FW to write. This avoids FW having to do an async read of the TPTE blocking the SQ until the read completes. To know if the current MR state is INVALID or not, iw_cxgb4 must track the state of each fastreg MR. The c4iw_mr struct state is updated as REG_MR and LOCAL_INV WRs are posted and completed, when a reg_mr is destroyed, and when RECV completions are processed that include a local invalidation. This optimization increases small IO IOPS for both iSER and NVMF. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Jack Morgenstein 提交于
In MLX qp packets, the LRH (built by the driver) has both a VL field and an SL field. When building a QP1 packet, the VL field should reflect the SLtoVL mapping and not arbitrarily contain zero (as is done now). This bug causes credit problems in IB switches at high rates of QP1 packets. The fix is to cache the SL to VL mapping in the driver, and look up the VL mapped to the SL provided in the send request when sending QP1 packets. For FW versions which support generating a port_management_config_change event with subtype sl-to-vl-table-change, the driver uses that event to update its sl-to-vl mapping cache. Otherwise, the driver snoops incoming SMP mads to update the cache. There remains the case where the FW is running in secure-host mode (so no QP0 packets are delivered to the driver), and the FW does not generate the sl2vl mapping change event. To support this case, the driver updates (via querying the FW) its sl2vl mapping cache when running in secure-host mode when it receives either a Port Up event or a client-reregister event (where the port is still up, but there may have been an opensm failover). OpenSM modifies the sl2vl mapping before Port Up and Client-reregister events occur, so if there is a mapping change the driver's cache will be properly updated. Fixes: 225c7b1f ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters") Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
This patch moves mthca vendor's specific structures to common UAPI folder which will be visible to all consumers. These structures are used by user-space library driver (libmthca) and currently manually copied to that library. This move will allow cross-compile against these files and simplify introduction of vendor specific data. Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
This patch moves nes vendor's specific structures to common UAPI folder which will be visible to all consumers. These structures are used by user-space library driver (libmlx4) and currently manually copied to that library. This move will allow cross-compile against these files and simplify introduction of vendor specific data. Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
This patch moves ocrdma vendor's specific structures to common UAPI folder which will be visible to all consumers. These structures are used by user-space library driver (libmlx4) and currently manually copied to that library. This move will allow cross-compile against these files and simplify introduction of vendor specific data. In addition, it changes types to be __uXX instead of uXX. Signed-off-by: NLeon Romanovsky <leon@kernel.org> Acked-By: NDevesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
This patch moves mlx4 vendor's specific structures to common UAPI folder which will be visible to all consumers. These structures are used by user-space library driver (libmlx4) and currently manually copied to that library. This move will allow cross-compile against these files and simplify introduction of vendor specific data. Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
This patch moves cxgb4 vendor's specific structures to common UAPI folder which will be visible to all consumers. These structures are used by user-space library driver (libcxgb4) and currently manually copied to that library. This move will allow cross-compile against these files and simplify introduction of vendor specific data. Signed-off-by: NLeon Romanovsky <leon@kernel.org> Reviewed-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
This patch moves cxgb3 vendor's specific structures to common UAPI folder which will be visible to all consumers. These structures are used by user-space library driver (libcxgb3) and currently manually copied to that library. This move will allow cross-compile against these files and simplify introduction of vendor specific data. Signed-off-by: NLeon Romanovsky <leon@kernel.org> Reviewed-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
This patch decouples and moves vendors specific structures to common UAPI folder which will be visible to all consumers. These structures are used by user-space library driver (libmlx5) and currently manually copied to that library. This move will allow cross-compile against these files and simplify introduction of vendor specific data. Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Yuval Shaia 提交于
Signed-off-by: NYuval Shaia <yuval.shaia@oracle.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bhaktipriya Shridhar 提交于
alloc_ordered_workqueue() with WQ_MEM_RECLAIM set, replaces deprecated create_singlethread_workqueue(). This is the identity conversion. The workqueue "wq" queues work item that maps to alias_guid_work. It has been identity converted. WQ_MEM_RECLAIM has been set to ensure forward progress under memory pressure. Signed-off-by: NBhaktipriya Shridhar <bhaktipriya96@gmail.com> Reviewed-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bhaktipriya Shridhar 提交于
alloc_ordered_workqueue() replaces deprecated create_singlethread_workqueue(). The workqueue "event_wq" queues work item &event->event_work and the workqueue "disconn_wq" queues work item work (maps to g_cm_core->disconn_wq). WQ_MEM_RECLAIM has not been set since the workqueues are not being used on a memory reclaim path. Signed-off-by: NBhaktipriya Shridhar <bhaktipriya96@gmail.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bhaktipriya Shridhar 提交于
alloc_ordered_workqueue() with WQ_MEM_RECLAIM set, replaces deprecated create_singlethread_workqueue(). This is the identity conversion. The workqueue "mcg_wq" queues work items &group->work and &group->timeout_work. The workqueue "clean_wq" queues work item mcg_clean_task. Both have been identity converted. WQ_MEM_RECLAIM has been set to ensure forward progress under memory pressure. Signed-off-by: NBhaktipriya Shridhar <bhaktipriya96@gmail.com> Reviewed-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bhaktipriya Shridhar 提交于
alloc_ordered_workqueue() with WQ_MEM_RECLAIM set, replaces deprecated create_singlethread_workqueue(). This is the identity conversion. The workqueue "wq" queues work item &ctx->work and the workqueue "ud_wq" queues work item &dm[i]->work. Both the workqueues have been identity converted. WQ_MEM_RECLAIM has been set to ensure forward progress under memory pressure. Signed-off-by: NBhaktipriya Shridhar <bhaktipriya96@gmail.com> Reviewed-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bhaktipriya Shridhar 提交于
alloc_ordered_workqueue() with WQ_MEM_RECLAIM set, replaces deprecated create_singlethread_workqueue(). This is the identity conversion. The workqueue "wq" queues work items &dm[i]->work, &ew->work. It has been identity converted. WQ_MEM_RECLAIM has been set to ensure forward progress under memory pressure. Signed-off-by: NBhaktipriya Shridhar <bhaktipriya96@gmail.com> Reviewed-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bhaktipriya Shridhar 提交于
alloc_ordered_workqueue() with WQ_MEM_RECLAIM set, replaces deprecated create_singlethread_workqueue(). This is the identity conversion. The workqueue "mlx5_ib_page_fault_wq" queues work item &qp_pfault->work. It has been identity converted. WQ_MEM_RECLAIM has been set to ensure forward progress under memory pressure. Signed-off-by: NBhaktipriya Shridhar <bhaktipriya96@gmail.com> Acked-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Bhaktipriya Shridhar 提交于
alloc_ordered_workqueue() with WQ_MEM_RECLAIM set, replaces deprecated create_singlethread_workqueue(). This is the identity conversion. The workqueue "cache->wq" queues work items &ent->work (maps to cache_work_func) and &ent->dwork(maps to delayed_cache_work_func). It has been identity converted. WQ_MEM_RECLAIM has been set to ensure forward progress under memory pressure. Signed-off-by: NBhaktipriya Shridhar <bhaktipriya96@gmail.com> Acked-by: NLeon Romanovsky <leonro@mellanox.com> Acked-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-