- 05 8月, 2010 24 次提交
-
-
由 Kyungmin Park 提交于
To use OneNAND interrupt at drivers, also extend DMA address to cover fully. Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Marek Szyprowski 提交于
This patch performs minor clocks cleanup for S5PV210 SoC. The duplicate HCLK clock entry for sdhci-s3c has been disabled and the index of a reserved entry has been fixed. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Marek Szyprowski 提交于
This patch add support for SDHCI blocks on Samsung Goni board. The following host controllers are defined: 1. Internal MoviNAND device (permanently wired to the controller) 2. Internal WiFI SDIO device (card is activated by power regualor) 3. External MMC/SD socket (card detection is provided by external gpio interrupt) Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Marek Szyprowski 提交于
This patch add support for SDHCI blocks on Samsung Aquila board. The following host controllers are defined: 1. Internal MoviNAND device (permanently wired to the controller) 2. Internal WiFI SDIO device (card is activated by power regualor) 3. External MMC/SD socket (card detection is provided by external gpio interrupt) Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Naveen Krishna Ch 提交于
This patch adds support I2C-0/1/2 devices to the SMDKV210/SMDKC110. Signed-off-by: NNaveen Krishna Ch <ch.naveen@samsung.com> [kgene.kim@samsung.com: Fixes wrong name] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Jongpill Lee 提交于
This patch adds s5pv210_sw_reset() which includes SWRESET for S5PV210/S5PC110. Signed-off-by: NJongpill Lee <boyko.lee@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Atul Dahiya 提交于
This patch adds support RTC driver for Samsung S5PV210/S5PC110. Signed-off-by: NAtul Dahiya <atul.dahiya@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Hyuk Lee 提交于
This patch adds support HSMMC on SMDKV210, and gpio configuration for S5PV210 hsmmc3. Signed-off-by: NHyuk Lee <hyuk1.lee@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Naveen Krishna Ch 提交于
This patch is to support keypad device to the SMDKV210 board. Signed-off-by: NNaveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Joonyoung Shim 提交于
This patch adds the keypad device platform helpers for S5PV210 cpu. Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
Now that S5PC110 machines and S5PV210 machines can be built into one kernel, update mach-s5pv210/Kconfig and s5pv210_defconfig. Tested on Aquila(S5PC110), GONI(S5PC110), SMDKC110(S5PC110) and SMDKV210(S5PV210). Created and tested against linux-2.6.35-rc5. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Acked-by: NMarek Szyprowski <m.szyprowski@samsung.com>
-
由 Abhilash Kesavan 提交于
Following is added for the CF-ATA driver: - Platform data strucure instantiation - Platform device enabling code - Platform-specific gpio setup code - Fixed IRQ naming to match across 64xx and v210 Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Marek Szyprowski 提交于
This patch adds required platform definitions for MAX8998 PMIC driver. Power regulators for LDO and BUCK outputs has been defined as well as a simple gpio-keys button for power key (to enable wakeup functionality with external interrupt). Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> [broonie@opensource.wolfsonmicro.com: For the regulator API usage] Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> [kgene.kim@samsung.com: minor title fix] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Marek Szyprowski 提交于
This patch adds required platform definitions for MAX8998 PMIC driver. Power regulators for LDO and BUCK outputs has been defined as well as a simple gpio-keys button for power key (to enable wakeup functionality with external interrupt). Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> [broonie@opensource.wolfsonmicro.com: For the regulator API usage] Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> [kgene.kim@samsung.com: minor title fix] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Marek Szyprowski 提交于
This patch adds required platform definitions to enable s3c-fb driver on GONI board. One framebuffer window in 480x800x16bpp mode is defined. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: minor title fix] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch fixes on MAX_PHYSMEM_BITS for Sparsemem on S5PV210/S5PC110. Because physical memory can be located from 0x20000000 to 0x7fffffff, so MAX_PHYSMEM_BITS is 31 and not 32. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Joonyoung Shim 提交于
This patch is to support OneNAND device to the Aquila board. Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Joonyoung Shim 提交于
This patch is to support OneNAND device to the GONI board. Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Joonyoung Shim 提交于
The GONI board uses max UART FIFO size to each UART channels. Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Joonyoung Shim 提交于
The Aquila board uses max UART FIFO size to each UART channels. UART0 supports 256 bytes FIFO, but Aquila board supports 128 bytes FIFO because of initial chip bug. Also, this patch fixes to "s/smdkv210/aquila". Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Marek Szyprowski 提交于
This patch adds support for MP04 and MP05 gpio banks. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: minor title fix] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Jongpill Lee 提交于
This patch adds support common arch_reset() for S5P6440, S5P6442, S5PC100 and S5PV210/S5PC110. Now perform reset using Watchdog reset, SWRESET support with s5p_reset_hook() will be added later. Signed-off-by: NJongpill Lee <boyko.lee@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Kukjin Kim 提交于
This patch changes the definition name of default UCON, ULCON, and UFCON UART registers from ARCH(SoC) to Machine(Board). Because it depends on machine. Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
由 Joonyoung Shim 提交于
This patch adds an initcall for the s5p platforms so that they register their PMU IRQs with the PMU framework in the Kernel. Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 05 7月, 2010 1 次提交
-
-
由 MyungJoo Ham 提交于
1. Corrected shift values of I2S and UART clocks (CLK_GATE_IP3), which were defined incorrectly. 2. Corrected shift values of sclk_audio, uclk1, sclk_fimd, sclk_mmc, sclk_spi, sclk_pwm, which had duplicated .enable/.ctrlbit with their twins defined in struct clk init_clocks_disable[] and struct clk init_clocks[]. We've changed their .enable/.ctrlbit to use CLK_SRC_MASK register to avoid the duplicated clock problem described below. NOTE: Duplicated Clock Problem Please note that each clock definition should access different control register; otherwise, the system may suffer lockups. For example, if we have two clock definitions "a" and "b" which access the same register (and the shift value). Then, when we do: module A clk = clk_get("a"); clk->clk_enable(clk); module B (context switch) clk = clk_get("b"); clk->clk_enable(clk); do something with clk. clk->clk_disable(clk); module A (context switch) do something with clk * At this point, the system may hang. Therefore, there should be no clock definitions with the same contol register/shift. If we need to create "aliases", then, creating child clocks sharing the clock should be fine. 3. Corrected other sclk_* shift values and access registers. Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: minor title and message fix] Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
-
- 26 5月, 2010 1 次提交
-
-
由 Pannaga Bhushan 提交于
This patch does the following: 1. Corrects the common platform code for external interrupts for using the VIC mask/unmask bits also. 2. Moves the common defines related to external interrupt for plat-s5p to common files. 3. Based on the new common defines, corresponding changes are made in the affected platforms (S5P6440, S5P6442 and S5PC100). Signed-off-by: NPannaga Bhushan <p.bhushan@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
- 20 5月, 2010 14 次提交
-
-
由 Ben Dooks 提交于
Add temporary <mach/regs-fb.h> until the new framebuffer driver can be merged. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Ensure the ADC device is touched only if S3C_DEV_ADC is selected. Fixes: arch/arm/mach-s5pv210/built-in.o: In function `s5pv210_map_io': /home/kgene/bjdooks/arch/arm/mach-s5pv210/cpu.c:92: undefined reference to `s3c_device_adc' Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Banajit Goswami 提交于
This patch adds support for Watchdog timer for Samsung S5PV210. Signed-off-by: NBanajit Goswami <banajit.g@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Jassi Brar 提交于
Define SPI platform devices for the SoC. Signed-off-by: NJassi Brar <jassi.brar@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
Update the Kconfig order and add a spacer between device setup support and the machine definitions. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Joonyoung Shim 提交于
This is for samsung GONI board using s5pc110. Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Reviewed-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Marek Szyprowski 提交于
This patch adds sdhci platform helpers required by sdhci-s3c driver. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Marek Szyprowski 提交于
This patch adds I2C platform helpers required by s3c2440-i2c driver. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Marek Szyprowski 提交于
This patch adds common framebuffer device helpers and register defines for S5PV210 based machines. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Marek Szyprowski 提交于
This patch adds setup code for Samsung OneNAND controller driver. The driver needs to be aware on which SoC it is running, so the actual device id is being changed in cpu init code. S3C64xx SoCs have 2 OneNAND controllers while S5PC100 and S5PC110 has only one. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> [ben-linux@fluff.org: sort map.h entries] Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Marek Szyprowski 提交于
This patch adds required platform definitions to enable s3c-fb driver. Two framebuffer windows in 480x800x16bpp mode are defined. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Marek Szyprowski 提交于
Add basic support for Samsung Aquila board. This board is based on S5PC110 SoC. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Ben Dooks 提交于
The arch/arm/mach-s5pv210/Kconfig had a choice entry to choose which of the two machines to build, which is silly since you can easily build more than one machine at a time. Remove the choice entry so that both machines and any future additions can all build in harmony. Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Jongpill Lee 提交于
Add support for external interrupts on S5PV210. Signed-off-by: NJongpill Lee <boyko.lee@samsung.com> Signed-off-by: NPannaga Bhushan <p.bhushan@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> [ben-linux@fluff.org: Ext => IRQ_EINT in title] Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-