This patch (as1071) combines hub_activate() and hub_restart() into a
single routine.  There's no point keeping them separate, since they
are always called together.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1082) makes a small optimization to the way the hub
driver carries out port debouncing immediately after a hub is
activated (i.e., initialized, reset, or resumed).  If any port-change
statuses are observed, the code will delay for a minimal debounce
period -- thereby making a good start at debouncing all the ports at
once.

If this wasn't sufficient then khubd will debounce any port that still
requires attention.  But in most cases it should suffice; it's rare
for a device to need more than a minimal debounce delay.  (In the
cases of hub initialization or reset even that is most likely not
needed, since any devices plugged in at such times have probably been
attached for a while.)
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1073) adds to khubd a way to recover from power-session
interruption caused by transient connect-change or enable-change
events.  After the debouncing period, khubd attempts to do a
USB-Persist-style reset or reset-resume.  If it works, the connection
will remain unscathed.

The upshot is that we will be more immune to noise caused by EMI.  The
grace period is on the order of 100 ms, so this won't permit recovery
from the "accidentally knocked the USB cable out of its socket" type
of event, but it's a start.

As an added bonus, if a device was suspended when the system goes to
sleep then we no longer need to check for power-session interruptions
when the system wakes up.  Khubd will naturally see the status change
while processing the device's parent hub and will do the right thing.

The remote_wakeup() routine is changed; now it expects the caller to
acquire the device lock rather than acquiring the lock itself.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1081) straightens out the logic of the hub_restart()
routine.  Each port of the hub is scanned and the driver makes sure
that ports which are supposed to be disabled really _are_ disabled.
Any ports with a significant change in status are flagged in
hub->change_bits, so that khubd can focus on them without the need to
scan all the ports a second time -- which means the hub->activating
flag is no longer needed.

Also, it is now recognized explicitly that the only reason for
resuming a port which was not suspended is to carry out a reset-resume
operation, which happens only in a non-CONFIG_USB_SUSPEND setting.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This reverts Linus's previous patch that is in mainline to make it
easier for the USB hub.c patches that follow this to apply cleanly.  The
functionality will be added back in a followon patch in this series.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1080) makes a significant change to the way khubd
handles port connect-change and enable-change events.  Both types of
event are now debounced, and the debouncing is carried out _before_ an
existing usb_device is unregistered, instead of afterward.

This means that drivers will have to deal with longer runs of errors
when a device is unplugged, but they are supposed to be prepared for
that in any case.

The advantage is that when an enable-change occurs (caused for example
by electromagnetic interference), the debouncing period will provide
time for the cause of the problem to die away.  A simple port reset
(added in a forthcoming patch) will then allow us to recover from the
fault.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1070) creates a new subroutine to check whether a device
can be resumed.  This code is needed even when CONFIG_USB_SUSPEND
isn't set, because devices do suspend themselves when the root hub
(and hence the entire bus) is suspended, and power sessions can get
lost during a system sleep even without individual port suspends.

The patch also fixes a loose end in USB-Persist reset-resume handling.
When a low- or full-speed device is attached to an EHCI's companion
controller, the port handoff during resume will cause the companion
port's connect-status-change feature to be set.  If that flag isn't
cleared, the port-reset code will think it indicates that the device
has been unplugged and the reset-resume will fail.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The bus_id field is going away, use the dev_set_name() function
to set it properly.
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The bus_id field is going away, use the dev_name() function instead.
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This reverts Alan's previous patch so that the recent Hub changes will
apply cleanly.  The above mentioned patch was needed for 2.6.26 to work
properly.

Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Lukas Hejtmanek <xhejtman@ics.muni.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This changes usb_create_hcd() to be able to handle the fact that
pci_name() has changed to a constant string.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NMatthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  netfilter: nf_conntrack_sctp: fix sparse warnings
  netfilter: nf_nat_sip: c= is optional for session
  netfilter: xt_TCPMSS: collapse tcpmss_reverse_mtu{4,6} into one function
  netfilter: nfnetlink_log: send complete hardware header
  netfilter: xt_time: fix time's time_mt()'s use of do_div()
  netfilter: accounting rework: ct_extend + 64bit counters (v4)
  netlink: add NLA_PUT_BE64 macro
  netfilter: nf_nat_core: eliminate useless find_appropriate_src for IP_NAT_RANGE_PROTO_RANDOM
  hdlcdrv: Fix CRC calculation.
  Revert "pkt_sched: Make default qdisc nonshared-multiqueue safe."
  net: In __netif_schedule() use WARN_ON instead of BUG_ON
  net: Improve simple_tx_hash().
  pkt_sched: Remove unused variable skb in dev_deactivate_queue function.
  sunhme: Remove stop/wake TX queue calls in set-multicast-list handler.
  ucc_geth: do not touch net queue in adjust_link phylib callback
  gianfar: do not touch net queue in adjust_link phylib callback
  atl1: Do not wake queue before queue has been started.

Fix kernel-doc comments so that they don't produce errors.
Also cut some extraneous copy-paste text.

Error(linhead//drivers/pci/pci.c:1133): duplicate section name 'Description'
Error(linhead//drivers/pci/pci.c:1189): duplicate section name 'Description'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'x86/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (160 commits)
  x86: remove extra calling to get ext cpuid level
  x86: use setup_clear_cpu_cap() when disabling the lapic
  KVM: fix exception entry / build bug, on 64-bit
  x86: add unknown_nmi_panic kernel parameter
  x86, VisWS: turn into generic arch, eliminate leftover files
  x86: add ->pre_time_init to x86_quirks
  x86: extend and use x86_quirks to clean up NUMAQ code
  x86: introduce x86_quirks
  x86: improve debug printout: add target bootmem range in early_res_to_bootmem()
  Subject: devmem, x86: fix rename of CONFIG_NONPROMISC_DEVMEM
  x86: remove arch_get_ram_range
  x86: Add a debugfs interface to dump PAT memtype
  x86: Add a arch directory for x86 under debugfs
  x86: i386: reduce boot fixmap space
  i386/xen: add proper unwind annotations to xen_sysenter_target
  x86: reduce force_mwait visibility
  x86: reduce forbid_dac's visibility
  x86: fix two modpost warnings
  x86: check function status in EDD boot code
  x86_64: ia32_signal.c: remove signal number conversion
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
  dm crypt: add merge
  dm table: remove merge_bvec sector restriction
  dm: linear add merge
  dm: introduce merge_bvec_fn
  dm snapshot: use per device mempools
  dm snapshot: fix race during exception creation
  dm snapshot: track snapshot reads
  dm mpath: fix test for reinstate_path
  dm mpath: return parameter error
  dm io: remove struct padding
  dm log: make dm_dirty_log init and exit static
  dm mpath: free path selector on invalid args

* 'for-linus' of git://neil.brown.name/md: (52 commits)
  md: Protect access to mddev->disks list using RCU
  md: only count actual openers as access which prevent a 'stop'
  md: linear: Make array_size sector-based and rename it to array_sectors.
  md: Make mddev->array_size sector-based.
  md: Make super_type->rdev_size_change() take sector-based sizes.
  md: Fix check for overlapping devices.
  md: Tidy up rdev_size_store a bit:
  md: Remove some unused macros.
  md: Turn rdev->sb_offset into a sector-based quantity.
  md: Make calc_dev_sboffset() return a sector count.
  md: Replace calc_dev_size() by calc_num_sectors().
  md: Make update_size() take the number of sectors.
  md: Better control of when do_md_stop is allowed to stop the array.
  md: get_disk_info(): Don't convert between signed and unsigned and back.
  md: Simplify restart_array().
  md: alloc_disk_sb(): Return proper error value.
  md: Simplify sb_equal().
  md: Simplify uuid_equal().
  md: sb_equal(): Fix misleading printk.
  md: Fix a typo in the comment to cmd_match().
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (48 commits)
  Input: add switch for dock events
  Input: add microphone insert switch definition
  Input: i8042 - add Arima-Rioworks HDAMB board to noloop list
  Input: sgi_btns - add support for SGI Indy volume buttons
  Input: add option to disable HP SDC driver
  Input: serio - trivial documentation fix
  Input: add new serio driver for Xilinx XPS PS2 IP
  Input: add driver for Tabletkiosk Sahara TouchIT-213 touchscreen
  Input: new driver for SGI O2 volume buttons
  Input: yealink - reliably kill urbs
  Input: q40kbd - make q40kbd_lock static
  Input: gtco - eliminate early return
  Input: i8042 - add Dritek quirk for Acer Aspire 5720
  Input: usbtouchscreen - ignore eGalax screens supporting HID protocol
  Input: i8042 - add Medion NAM 2070 to noloop blacklist
  Input: i8042 - add Gericom Bellagio to nomux blacklist
  Input: i8042 - add Acer Aspire 1360 to nomux blacklist
  Input: hp_sdc_mlc.c - make a struct static
  Input: hil_mlc.c - make code static
  Input: wistron - generate normal key event if bluetooth or wifi not present
  ...

Introduced by a258860e (netfilter: ctnetlink: add full support for SCTP to ctnetlink):

net/netfilter/nf_conntrack_proto_sctp.c:483:2: warning: cast from restricted type
net/netfilter/nf_conntrack_proto_sctp.c:483:2: warning: incorrect type in argument 1 (different base types)
net/netfilter/nf_conntrack_proto_sctp.c:483:2:    expected unsigned int [unsigned] [usertype] x
net/netfilter/nf_conntrack_proto_sctp.c:483:2:    got restricted unsigned int const <noident>
net/netfilter/nf_conntrack_proto_sctp.c:483:2: warning: cast from restricted type
net/netfilter/nf_conntrack_proto_sctp.c:483:2: warning: cast from restricted type
net/netfilter/nf_conntrack_proto_sctp.c:483:2: warning: cast from restricted type
net/netfilter/nf_conntrack_proto_sctp.c:483:2: warning: cast from restricted type
net/netfilter/nf_conntrack_proto_sctp.c:487:2: warning: cast from restricted type
net/netfilter/nf_conntrack_proto_sctp.c:487:2: warning: incorrect type in argument 1 (different base types)
net/netfilter/nf_conntrack_proto_sctp.c:487:2:    expected unsigned int [unsigned] [usertype] x
net/netfilter/nf_conntrack_proto_sctp.c:487:2:    got restricted unsigned int const <noident>
net/netfilter/nf_conntrack_proto_sctp.c:487:2: warning: cast from restricted type
net/netfilter/nf_conntrack_proto_sctp.c:487:2: warning: cast from restricted type
net/netfilter/nf_conntrack_proto_sctp.c:487:2: warning: cast from restricted type
net/netfilter/nf_conntrack_proto_sctp.c:487:2: warning: cast from restricted type
net/netfilter/nf_conntrack_proto_sctp.c:532:42: warning: incorrect type in assignment (different base types)
net/netfilter/nf_conntrack_proto_sctp.c:532:42:    expected restricted unsigned int <noident>
net/netfilter/nf_conntrack_proto_sctp.c:532:42:    got unsigned int
net/netfilter/nf_conntrack_proto_sctp.c:534:39: warning: incorrect type in assignment (different base types)
net/netfilter/nf_conntrack_proto_sctp.c:534:39:    expected restricted unsigned int <noident>
net/netfilter/nf_conntrack_proto_sctp.c:534:39:    got unsigned int
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

According to RFC2327, the connection information is optional
in the session description since it can be specified in the
media description instead.

My provider does exactly that and does not provide any connection
information in the session description.  As a result the new
kernel drops all invite responses.

This patch makes it optional as documented.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJan Engelhardt <jengelh@medozas.de>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds some fields to NFLOG to be able to send the complete
hardware header with all necessary informations.
It sends to userspace:
 * the type of hardware link
 * the lenght of hardware header
 * the hardware header
Signed-off-by: NEric Leblond <eric@inl.fr>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix netfilter xt_time's time_mt()'s use of do_div() on an s64 by using
div_s64() instead.

This was introduced by patch ee4411a1
("[NETFILTER]: x_tables: add xt_time match").
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Initially netfilter has had 64bit counters for conntrack-based accounting, but
it was changed in 2.6.14 to save memory. Unfortunately in-kernel 64bit counters are
still required, for example for "connbytes" extension. However, 64bit counters
waste a lot of memory and it was not possible to enable/disable it runtime.

This patch:
 - reimplements accounting with respect to the extension infrastructure,
 - makes one global version of seq_print_acct() instead of two seq_print_counters(),
 - makes it possible to enable it at boot time (for CONFIG_SYSCTL/CONFIG_SYSFS=n),
 - makes it possible to enable/disable it at runtime by sysctl or sysfs,
 - extends counters from 32bit to 64bit,
 - renames ip_conntrack_counter -> nf_conn_counter,
 - enables accounting code unconditionally (no longer depends on CONFIG_NF_CT_ACCT),
 - set initial accounting enable state based on CONFIG_NF_CT_ACCT
 - removes buggy IPCT_COUNTER_FILLING event handling.

If accounting is enabled newly created connections get additional acct extend.
Old connections are not changed as it is not possible to add a ct_extend area
to confirmed conntrack. Accounting is performed for all connections with
acct extend regardless of a current state of "net.netfilter.nf_conntrack_acct".
Signed-off-by: NKrzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add NLA_PUT_BE64 macro required for 64bit counters in netfilter
Signed-off-by: NKrzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NChangli Gao <xiaosuo@gmail.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is a trivial patch against the hdlcdrv module that fixes its CRC
calculation. The finished CRC was overwriting the first two bytes of
each packet rather than being appended to the end.

I've tested this with 2.6.8 and 2.6.10-rc1, but hdlcdrv hasn't changed
much recently so it should work with many other kernel versions.
Signed-off-by: NMicah Dowty <micah@navi.cx>
Acked-by: NThomas Sailer <t.sailer@alumni.ethz.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit a0c80b80.

After discussions with Jamal and Herbert on netdev, we should
provide at least minimal prioritization at the qdisc level
even in multiqueue situations.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based upon feedback from Eric Dumazet and Andi Kleen.

Cure several deficiencies in simple_tx_hash() by using
jhash + reciprocol multiply.

1) Eliminates expensive modulus operation.

2) Makes hash less attackable by using random seed.

3) Eliminates endianness hash distribution issues.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: (44 commits)
  sparc: Remove Sparc's asm-offsets for sclow.S
  sparc64: Update defconfig.
  sparc64: Add Niagara2 RNG driver.
  sparc64: Add missing hypervisor service group numbers.
  sparc64: Remove 4MB and 512K base page size options.
  sparc64: Convert to generic helpers for IPI function calls.
  sparc: Use new '%pS' infrastructure to print symbols.
  sparc32: fix init.c allnoconfig build error
  sparc64: Config category "Processor type and features" absent
  sparc: arch/sparc/kernel/apc.c to unlocked_ioctl
  sparc: join the remaining header files
  sparc: merge header files with trivial differences
  sparc: when header files are equal use asm-sparc version
  sparc: copy sparc64 specific files to asm-sparc
  sparc: Merge asm-sparc{,64}/asi.h
  sparc: export openprom.h to userspace
  sparc: Merge asm-sparc{,64}/types.h
  sparc: Merge asm-sparc{,64}/termios.h
  sparc: Merge asm-sparc{,64}/termbits.h
  sparc: Merge asm-sparc{,64}/setup.h
  ...

Commits b02f5ad6 ("istallion: use
tty_port") and a352def2 ("tty: Ldisc
revamp") broke the istallion driver.

Fix the compile error and silence a warning.
Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Removed unused variable 'skb' in the dev_deactivate_queue function
Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based upon a bug report by Alexander Beregalov and commentary
from Ben Hutchings.

These are totally unnecessary, in particular because this
driver's ->hard_start_xmit() handler takes the same driver
spinlock that the set-multicast-list handler uses.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the net queue has not been started, we'll get this nice oops
and non-working ethernet:

------------[ cut here ]------------
Kernel BUG at c01f4648 [verbose debug info unavailable]
Oops: Exception in kernel mode, sig: 5 [#1]
MPC836x RDK
Modules linked in:
NIP: c01f4648 LR: c01c0a10 CTR: c01c08e4
REGS: cf839e40 TRAP: 0700   Not tainted  (2.6.26-05254-gc7b9969)
MSR: 00021032 <ME,IR,DR>  CR: 22042044  XER: 00000000
TASK = cf828c30[4] 'events/0' THREAD: cf838000
GPR00: c01c0a10 cf839ef0 cf828c30 c035ceb0 cf8469a0 00000064 00000000 00000000
GPR08: c035ceb0 00000001 00000001 cf99c280 22044044 7ca81020 0fffc000 00000000
GPR16: 0fff2544 0fff63c0 00000000 0fff78e0 0ffa5580 00000004 00000000 00000000
GPR24: 02082000 cf9d0000 d1068000 00009032 cf846800 cf846b80 00000001 00000014
NIP [c01f4648] __netif_schedule+0x28/0x8c
LR [c01c0a10] adjust_link+0x12c/0x1e4
Call Trace:
[cf839ef0] [c0380f50] 0xc0380f50 (unreliable)
[cf839f10] [c01c0a10] adjust_link+0x12c/0x1e4
[cf839f40] [c01c2628] phy_state_machine+0x2e0/0x448
[cf839f60] [c00425e8] run_workqueue+0xc8/0x168
[cf839f90] [c0042c6c] worker_thread+0x70/0xd0
[cf839fd0] [c0046954] kthread+0x48/0x84
[cf839ff0] [c0012488] kernel_thread+0x44/0x60
Instruction dump:
7c0803a6 4e800020 3d20c036 9421ffe0 7c0802a6 7c681b78 3929ceb0 7c694a78
7d290034 90010024 bfa10014 5529d97e <0f090000> 39600002 38030024 7d200028
---[ end trace a57d367843bd2904 ]---

Since the driver is using phylib (which is doing netif_carrier_on/off()),
we should simply remove netif_tx_schedule_all() from adjust_link().
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the net queue has not been started, we'll get this nice oops
and non-working ethernet:

PHY: 0:01 - Link is Up - 1000/Full
------------[ cut here ]------------
kernel BUG at net/core/dev.c:1328!
Oops: Exception in kernel mode, sig: 5 [#1]
MPC837x RDB
Modules linked in:
NIP: c02544a0 LR: c01a17d0 CTR: c01a16ac
REGS: cf837e40 TRAP: 0700   Not tainted  (2.6.26-05253-g14b395e3)
MSR: 00021032 <ME,IR,DR>  CR: 22042044  XER: 00000000
TASK = cf819400[5] 'events/0' THREAD: cf836000
GPR00: c01a17d0 cf837ef0 cf819400 c03d8d08 cf8469a0 00000064 00000000 00000000
GPR08: c03d8d08 00000001 00000001 cf899ba0 22044044 00000000 0fffd000 00000000
GPR16: 0fff3028 0fff6cf0 00000000 0fff8390 0ff494a0 00000004 00000000 00000000
GPR24: c0361a00 00001058 cf9f6600 00009032 cf846800 cf846b80 00000001 00000014
NIP [c02544a0] __netif_schedule+0x28/0x8c
LR [c01a17d0] adjust_link+0x124/0x1cc
Call Trace:
[cf837ef0] [c03fb3a0] 0xc03fb3a0 (unreliable)
[cf837f10] [c01a17d0] adjust_link+0x124/0x1cc
[cf837f40] [c01a8e28] phy_state_machine+0x2e0/0x448
[cf837f60] [c0040254] run_workqueue+0xc8/0x168
[cf837f90] [c00408d8] worker_thread+0x70/0xd0
[cf837fd0] [c0044630] kthread+0x48/0x84
[cf837ff0] [c0012610] kernel_thread+0x44/0x60
Instruction dump:
7c0803a6 4e800020 3d20c03e 9421ffe0 7c0802a6 7c681b78 39298d08 7c694a78
7d290034 90010024 bfa10014 5529d97e <0f090000> 39600002 38030024 7d200028
---[ end trace 13dfd73ee42d0c30 ]---

Since the driver is using phylib (which is doing netif_carrier_on/off()),
we should simply remove netif_tx_schedule_all() from adjust_link().
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based upon a bug report by Alexey Dobriyan, the patch is
also tested by him and confirmed to fix the problem.

Packet flow during link state events should not be done by
waking and stopping the TX queue anyways, that is handled
transparently by netif_carrier_{on,off}().

So, remove the netif_{wake,stop}_queue() calls in the link
check code, and add the necessary netif_start_queue() call
to atl1_up().
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branches 'x86/urgent', 'x86/amd-iommu', 'x86/apic', 'x86/cleanups', 'x86/core', 'x86/cpu', 'x86/fixmap', 'x86/gart', 'x86/kprobes', 'x86/memtest', 'x86/modules', 'x86/nmi', 'x86/pat', 'x86/reboot', 'x86/setup', 'x86/step', 'x86/unify-pci', 'x86/uv', 'x86/xen' and 'xen-64bit' into x86/for-linus