- 27 12月, 2019 40 次提交
-
-
commit 12209993 upstream. There is one user of __kernel_fpu_begin() and before invoking it, it invokes preempt_disable(). So it could invoke kernel_fpu_begin() right away. The 32bit version of arch_efi_call_virt_setup() and arch_efi_call_virt_teardown() does this already. The comment above *kernel_fpu*() claims that before invoking __kernel_fpu_begin() preemption should be disabled and that KVM is a good example of doing it. Well, KVM doesn't do that since commit f775b13e ("x86,kvm: move qemu/guest FPU switching out to vcpu_run") so it is not an example anymore. With EFI gone as the last user of __kernel_fpu_{begin|end}(), both can be made static and not exported anymore. Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: NBorislav Petkov <bp@suse.de> Reviewed-by: NRik van Riel <riel@surriel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Nicolai Stange <nstange@suse.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm ML <kvm@vger.kernel.org> Cc: linux-efi <linux-efi@vger.kernel.org> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20181129150210.2k4mawt37ow6c2vq@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Jan Kara 提交于
commit f2c57d91 upstream. In DAX mode a write pagefault can race with write(2) in the following way: CPU0 CPU1 write fault for mapped zero page (hole) dax_iomap_rw() iomap_apply() xfs_file_iomap_begin() - allocates blocks dax_iomap_actor() invalidate_inode_pages2_range() - invalidates radix tree entries in given range dax_iomap_pte_fault() grab_mapping_entry() - no entry found, creates empty ... xfs_file_iomap_begin() - finds already allocated block ... vmf_insert_mixed_mkwrite() - WARNs and does nothing because there is still zero page mapped in PTE unmap_mapping_pages() This race results in WARN_ON from insert_pfn() and is occasionally triggered by fstest generic/344. Note that the race is otherwise harmless as before write(2) on CPU0 is finished, we will invalidate page tables properly and thus user of mmap will see modified data from write(2) from that point on. So just restrict the warning only to the case when the PFN in PTE is not zero page. Link: http://lkml.kernel.org/r/20180824154542.26872-1-jack@suse.czSigned-off-by: NJan Kara <jack@suse.cz> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Daniel Borkmann 提交于
commit a9d57ef1 upstream. Commit ce02ef06 ("x86, retpolines: Raise limit for generating indirect calls from switch-case") raised the limit under retpolines to 20 switch cases where gcc would only then start to emit jump tables, and therefore effectively disabling the emission of slow indirect calls in this area. After this has been brought to attention to gcc folks [0], Martin Liska has then fixed gcc to align with clang by avoiding to generate switch jump tables entirely under retpolines. This is taking effect in gcc starting from stable version 8.4.0. Given kernel supports compilation with older versions of gcc where the fix is not being available or backported anymore, we need to keep the extra KBUILD_CFLAGS around for some time and generally set the -fno-jump-tables to align with what more recent gcc is doing automatically today. More than 20 switch cases are not expected to be fast-path critical, but it would still be good to align with gcc behavior for versions < 8.4.0 in order to have consistency across supported gcc versions. vmlinux size is slightly growing by 0.27% for older gcc. This flag is only set to work around affected gcc, no change for clang. [0] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=86952Suggested-by: NMartin Liska <mliska@suse.cz> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Björn Töpel<bjorn.topel@intel.com> Cc: Magnus Karlsson <magnus.karlsson@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: H.J. Lu <hjl.tools@gmail.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: David S. Miller <davem@davemloft.net> Link: https://lkml.kernel.org/r/20190325135620.14882-1-daniel@iogearbox.netSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Daniel Borkmann 提交于
commit ce02ef06 upstream. From networking side, there are numerous attempts to get rid of indirect calls in fast-path wherever feasible in order to avoid the cost of retpolines, for example, just to name a few: * 283c16a2 ("indirect call wrappers: helpers to speed-up indirect calls of builtin") * aaa5d90b ("net: use indirect call wrappers at GRO network layer") * 028e0a47 ("net: use indirect call wrappers at GRO transport layer") * 356da6d0 ("dma-mapping: bypass indirect calls for dma-direct") * 09772d92 ("bpf: avoid retpoline for lookup/update/delete calls on maps") * 10870dd8 ("netfilter: nf_tables: add direct calls for all builtin expressions") [...] Recent work on XDP from Björn and Magnus additionally found that manually transforming the XDP return code switch statement with more than 5 cases into if-else combination would result in a considerable speedup in XDP layer due to avoidance of indirect calls in CONFIG_RETPOLINE enabled builds. On i40e driver with XDP prog attached, a 20-26% speedup has been observed [0]. Aside from XDP, there are many other places later in the networking stack's critical path with similar switch-case processing. Rather than fixing every XDP-enabled driver and locations in stack by hand, it would be good to instead raise the limit where gcc would emit expensive indirect calls from the switch under retpolines and stick with the default as-is in case of !retpoline configured kernels. This would also have the advantage that for archs where this is not necessary, we let compiler select the underlying target optimization for these constructs and avoid potential slow-downs by if-else hand-rewrite. In case of gcc, this setting is controlled by case-values-threshold which has an architecture global default that selects 4 or 5 (latter if target does not have a case insn that compares the bounds) where some arch back ends like arm64 or s390 override it with their own target hooks, for example, in gcc commit db7a90aa0de5 ("S/390: Disable prediction of indirect branches") the threshold pretty much disables jump tables by limit of 20 under retpoline builds. Comparing gcc's and clang's default code generation on x86-64 under O2 level with retpoline build results in the following outcome for 5 switch cases: * gcc with -mindirect-branch=thunk-inline -mindirect-branch-register: # gdb -batch -ex 'disassemble dispatch' ./c-switch Dump of assembler code for function dispatch: 0x0000000000400be0 <+0>: cmp $0x4,%edi 0x0000000000400be3 <+3>: ja 0x400c35 <dispatch+85> 0x0000000000400be5 <+5>: lea 0x915f8(%rip),%rdx # 0x4921e4 0x0000000000400bec <+12>: mov %edi,%edi 0x0000000000400bee <+14>: movslq (%rdx,%rdi,4),%rax 0x0000000000400bf2 <+18>: add %rdx,%rax 0x0000000000400bf5 <+21>: callq 0x400c01 <dispatch+33> 0x0000000000400bfa <+26>: pause 0x0000000000400bfc <+28>: lfence 0x0000000000400bff <+31>: jmp 0x400bfa <dispatch+26> 0x0000000000400c01 <+33>: mov %rax,(%rsp) 0x0000000000400c05 <+37>: retq 0x0000000000400c06 <+38>: nopw %cs:0x0(%rax,%rax,1) 0x0000000000400c10 <+48>: jmpq 0x400c90 <fn_3> 0x0000000000400c15 <+53>: nopl (%rax) 0x0000000000400c18 <+56>: jmpq 0x400c70 <fn_2> 0x0000000000400c1d <+61>: nopl (%rax) 0x0000000000400c20 <+64>: jmpq 0x400c50 <fn_1> 0x0000000000400c25 <+69>: nopl (%rax) 0x0000000000400c28 <+72>: jmpq 0x400c40 <fn_0> 0x0000000000400c2d <+77>: nopl (%rax) 0x0000000000400c30 <+80>: jmpq 0x400cb0 <fn_4> 0x0000000000400c35 <+85>: push %rax 0x0000000000400c36 <+86>: callq 0x40dd80 <abort> End of assembler dump. * clang with -mretpoline emitting search tree: # gdb -batch -ex 'disassemble dispatch' ./c-switch Dump of assembler code for function dispatch: 0x0000000000400b30 <+0>: cmp $0x1,%edi 0x0000000000400b33 <+3>: jle 0x400b44 <dispatch+20> 0x0000000000400b35 <+5>: cmp $0x2,%edi 0x0000000000400b38 <+8>: je 0x400b4d <dispatch+29> 0x0000000000400b3a <+10>: cmp $0x3,%edi 0x0000000000400b3d <+13>: jne 0x400b52 <dispatch+34> 0x0000000000400b3f <+15>: jmpq 0x400c50 <fn_3> 0x0000000000400b44 <+20>: test %edi,%edi 0x0000000000400b46 <+22>: jne 0x400b5c <dispatch+44> 0x0000000000400b48 <+24>: jmpq 0x400c20 <fn_0> 0x0000000000400b4d <+29>: jmpq 0x400c40 <fn_2> 0x0000000000400b52 <+34>: cmp $0x4,%edi 0x0000000000400b55 <+37>: jne 0x400b66 <dispatch+54> 0x0000000000400b57 <+39>: jmpq 0x400c60 <fn_4> 0x0000000000400b5c <+44>: cmp $0x1,%edi 0x0000000000400b5f <+47>: jne 0x400b66 <dispatch+54> 0x0000000000400b61 <+49>: jmpq 0x400c30 <fn_1> 0x0000000000400b66 <+54>: push %rax 0x0000000000400b67 <+55>: callq 0x40dd20 <abort> End of assembler dump. For sake of comparison, clang without -mretpoline: # gdb -batch -ex 'disassemble dispatch' ./c-switch Dump of assembler code for function dispatch: 0x0000000000400b30 <+0>: cmp $0x4,%edi 0x0000000000400b33 <+3>: ja 0x400b57 <dispatch+39> 0x0000000000400b35 <+5>: mov %edi,%eax 0x0000000000400b37 <+7>: jmpq *0x492148(,%rax,8) 0x0000000000400b3e <+14>: jmpq 0x400bf0 <fn_0> 0x0000000000400b43 <+19>: jmpq 0x400c30 <fn_4> 0x0000000000400b48 <+24>: jmpq 0x400c10 <fn_2> 0x0000000000400b4d <+29>: jmpq 0x400c20 <fn_3> 0x0000000000400b52 <+34>: jmpq 0x400c00 <fn_1> 0x0000000000400b57 <+39>: push %rax 0x0000000000400b58 <+40>: callq 0x40dcf0 <abort> End of assembler dump. Raising the cases to a high number (e.g. 100) will still result in similar code generation pattern with clang and gcc as above, in other words clang generally turns off jump table emission by having an extra expansion pass under retpoline build to turn indirectbr instructions from their IR into switch instructions as a built-in -mno-jump-table lowering of a switch (in this case, even if IR input already contained an indirect branch). For gcc, adding --param=case-values-threshold=20 as in similar fashion as s390 in order to raise the limit for x86 retpoline enabled builds results in a small vmlinux size increase of only 0.13% (before=18,027,528 after=18,051,192). For clang this option is ignored due to i) not being needed as mentioned and ii) not having above cmdline parameter. Non-retpoline-enabled builds with gcc continue to use the default case-values-threshold setting, so nothing changes here. [0] https://lore.kernel.org/netdev/20190129095754.9390-1-bjorn.topel@gmail.com/ and "The Path to DPDK Speeds for AF_XDP", LPC 2018, networking track: - http://vger.kernel.org/lpc_net2018_talks/lpc18_pres_af_xdp_perf-v3.pdf - http://vger.kernel.org/lpc_net2018_talks/lpc18_paper_af_xdp_perf-v2.pdfSigned-off-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NJesper Dangaard Brouer <brouer@redhat.com> Acked-by: NBjörn Töpel <bjorn.topel@intel.com> Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Cc: netdev@vger.kernel.org Cc: David S. Miller <davem@davemloft.net> Cc: Magnus Karlsson <magnus.karlsson@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Link: https://lkml.kernel.org/r/20190221221941.29358-1-daniel@iogearbox.netSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Mike Marshall 提交于
commit ec51f8ee1e63498e9f521ec0e5a6d04622bb2c67 upstream. A recent optimization had left private uninitialized. Fixes: 2bc4ca9bb600 ("aio: don't zero entire aio_kiocb aio_get_req()") Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NMike Marshall <hubcap@omnibond.com> Signed-off-by: NJens Axboe <axboe@kernel.dk> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Jens Axboe 提交于
commit 2bc4ca9bb600cbe36941da2b2a67189fc4302a04 upstream. It's 192 bytes, fairly substantial. Most items don't need to be cleared, especially not upfront. Clear the ones we do need to clear, and leave the other ones for setup when the iocb is prepared and submitted. Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJens Axboe <axboe@kernel.dk> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com> Conflicts: fs/aio.c [yyl: adjust context] Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Jens Axboe 提交于
commit bc9bff61624ac33b7c95861abea1af24ee7a94fc upstream. We know this is a read/write request, but in preparation for having different kinds of those, ensure that we call the assigned handler instead of assuming it's aio_complete_rq(). Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJens Axboe <axboe@kernel.dk> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Eric Dumazet 提交于
commit 032be5f1 upstream. After commit 5271953c ("rxrpc: Use the UDP encap_rcv hook"), rxrpc_input_packet() is directly called from lockless UDP receive path, under rcu_read_lock() protection. It must therefore use RCU rules : - udp_sk->sk_user_data can be cleared at any point in this function. rcu_dereference_sk_user_data() is what we need here. - Also, since sk_user_data might have been set in rxrpc_open_socket() we must observe a proper RCU grace period before kfree(local) in rxrpc_lookup_local() v4: @local can be NULL in xrpc_lookup_local() as reported by kbuild test robot <lkp@intel.com> and Julia Lawall <julia.lawall@lip6.fr>, thanks ! v3,v2 : addressed David Howells feedback, thanks ! syzbot reported : kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 19236 Comm: syz-executor703 Not tainted 5.1.0-rc6 #79 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__lock_acquire+0xbef/0x3fb0 kernel/locking/lockdep.c:3573 Code: 00 0f 85 a5 1f 00 00 48 81 c4 10 01 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 ea 03 <80> 3c 02 00 0f 85 4a 21 00 00 49 81 7d 00 20 54 9c 89 0f 84 cf f4 RSP: 0018:ffff88809d7aef58 EFLAGS: 00010002 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000026 RSI: 0000000000000000 RDI: 0000000000000001 RBP: ffff88809d7af090 R08: 0000000000000001 R09: 0000000000000001 R10: ffffed1015d05bc7 R11: ffff888089428600 R12: 0000000000000000 R13: 0000000000000130 R14: 0000000000000001 R15: 0000000000000001 FS: 00007f059044d700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004b6040 CR3: 00000000955ca000 CR4: 00000000001406f0 Call Trace: lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4211 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x95/0xcd kernel/locking/spinlock.c:152 skb_queue_tail+0x26/0x150 net/core/skbuff.c:2972 rxrpc_reject_packet net/rxrpc/input.c:1126 [inline] rxrpc_input_packet+0x4a0/0x5536 net/rxrpc/input.c:1414 udp_queue_rcv_one_skb+0xaf2/0x1780 net/ipv4/udp.c:2011 udp_queue_rcv_skb+0x128/0x730 net/ipv4/udp.c:2085 udp_unicast_rcv_skb.isra.0+0xb9/0x360 net/ipv4/udp.c:2245 __udp4_lib_rcv+0x701/0x2ca0 net/ipv4/udp.c:2301 udp_rcv+0x22/0x30 net/ipv4/udp.c:2482 ip_protocol_deliver_rcu+0x60/0x8f0 net/ipv4/ip_input.c:208 ip_local_deliver_finish+0x23b/0x390 net/ipv4/ip_input.c:234 NF_HOOK include/linux/netfilter.h:289 [inline] NF_HOOK include/linux/netfilter.h:283 [inline] ip_local_deliver+0x1e9/0x520 net/ipv4/ip_input.c:255 dst_input include/net/dst.h:450 [inline] ip_rcv_finish+0x1e1/0x300 net/ipv4/ip_input.c:413 NF_HOOK include/linux/netfilter.h:289 [inline] NF_HOOK include/linux/netfilter.h:283 [inline] ip_rcv+0xe8/0x3f0 net/ipv4/ip_input.c:523 __netif_receive_skb_one_core+0x115/0x1a0 net/core/dev.c:4987 __netif_receive_skb+0x2c/0x1c0 net/core/dev.c:5099 netif_receive_skb_internal+0x117/0x660 net/core/dev.c:5202 napi_frags_finish net/core/dev.c:5769 [inline] napi_gro_frags+0xade/0xd10 net/core/dev.c:5843 tun_get_user+0x2f24/0x3fb0 drivers/net/tun.c:1981 tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2027 call_write_iter include/linux/fs.h:1866 [inline] do_iter_readv_writev+0x5e1/0x8e0 fs/read_write.c:681 do_iter_write fs/read_write.c:957 [inline] do_iter_write+0x184/0x610 fs/read_write.c:938 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1002 do_writev+0x15e/0x370 fs/read_write.c:1037 __do_sys_writev fs/read_write.c:1110 [inline] __se_sys_writev fs/read_write.c:1107 [inline] __x64_sys_writev+0x75/0xb0 fs/read_write.c:1107 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 5271953c ("rxrpc: Use the UDP encap_rcv hook") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: Nsyzbot <syzkaller@googlegroups.com> Acked-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Tetsuo Handa 提交于
commit dd3ac9a6 upstream. syzbot is reporting uninitialized value at rds_connect() [1] and rds_bind() [2]. This is because syzbot is passing ulen == 0 whereas these functions expect that it is safe to access sockaddr->family field in order to determine minimal address length for validation. [1] https://syzkaller.appspot.com/bug?id=f4e61c010416c1e6f0fa3ffe247561b60a50ad71 [2] https://syzkaller.appspot.com/bug?id=a4bf9e41b7e055c3823fdcd83e8c58ca7270e38fReported-by: Nsyzbot <syzbot+0049bebbf3042dbd2e8f@syzkaller.appspotmail.com> Reported-by: Nsyzbot <syzbot+915c9f99f3dbc4bd6cd1@syzkaller.appspotmail.com> Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 YueHaibing 提交于
commit d3706566 upstream. Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by: NHulk Robot <hulkci@huawei.com> Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Yue Haibing 提交于
commit 01ca667133d019edc9f0a1f70a272447c84ec41f upstream. Syzkaller report this: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI CPU: 0 PID: 4378 Comm: syz-executor.0 Tainted: G C 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__lock_acquire+0x95b/0x3200 kernel/locking/lockdep.c:3573 Code: 00 0f 85 28 1e 00 00 48 81 c4 08 01 00 00 5b 5d 41 5c 41 5d 41 5e 41 5f c3 4c 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 cc 24 00 00 49 81 7d 00 e0 de 03 a6 41 bc 00 00 RSP: 0018:ffff8881e3c07a40 EFLAGS: 00010002 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000010 RSI: 0000000000000000 RDI: 0000000000000080 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8881e3c07d98 R11: ffff8881c7f21f80 R12: 0000000000000001 R13: 0000000000000080 R14: 0000000000000000 R15: 0000000000000001 FS: 00007fce2252e700(0000) GS:ffff8881f2400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fffc7eb0228 CR3: 00000001e5bea002 CR4: 00000000007606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: lock_acquire+0xff/0x2c0 kernel/locking/lockdep.c:4211 __mutex_lock_common kernel/locking/mutex.c:925 [inline] __mutex_lock+0xdf/0x1050 kernel/locking/mutex.c:1072 drain_workqueue+0x24/0x3f0 kernel/workqueue.c:2934 destroy_workqueue+0x23/0x630 kernel/workqueue.c:4319 __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x30c/0x480 kernel/module.c:961 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fce2252dc58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000140 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fce2252e6bc R13: 00000000004bcca9 R14: 00000000006f6b48 R15: 00000000ffffffff If alloc_workqueue fails, it should return -ENOMEM, otherwise may trigger this NULL pointer dereference while unloading drivers. Reported-by: NHulk Robot <hulkci@huawei.com> Fixes: 0a38c17a ("fm10k: Remove create_workqueue") Signed-off-by: NYue Haibing <yuehaibing@huawei.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Florian Westphal 提交于
commit 7caa56f0 upstream. It means userspace gave us a ruleset where there is some other data after the ebtables target but before the beginning of the next rule. Fixes: 81e675c2 ("netfilter: ebtables: add CONFIG_COMPAT support") Reported-by: syzbot+659574e7bcc7f7eb4df7@syzkaller.appspotmail.com Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Todd Kjos 提交于
commit 26528be6 upstream. Fixes crash found by syzbot: kernel BUG at drivers/android/binder_alloc.c:LINE! (2) Reported-and-tested-by: syzbot+55de1eb4975dec156d8f@syzkaller.appspotmail.com Signed-off-by: NTodd Kjos <tkjos@google.com> Reviewed-by: NJoel Fernandes (Google) <joel@joelfernandes.org> Cc: stable <stable@vger.kernel.org> # 5.0, 4.19, 4.14 Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Tetsuo Handa 提交于
commit 4d43d395 upstream. syzbot found a flush_work() caller who forgot to call INIT_WORK() because that work_struct was allocated by kzalloc() [1]. But the message INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. by lock_map_acquire() is failing to tell that INIT_WORK() is missing. Since flush_work() without INIT_WORK() is a bug, and INIT_WORK() should set ->func field to non-zero, let's warn if ->func field is zero. [1] https://syzkaller.appspot.com/bug?id=a5954455fcfa51c29ca2ab55b203076337e1c770Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Alexander Shishkin 提交于
commit 91d3f8a6 upstream. Commit 9ed3f222 ("intel_th: Don't reference unassigned outputs") fixes a NULL dereference for all masters except the last one ("256+"), which keeps the stale pointer after the output driver had been unassigned. Fix the off-by-one. Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: 9ed3f222 ("intel_th: Don't reference unassigned outputs") Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Linus Torvalds 提交于
commit baf76f0c upstream. This way, slhc_free() accepts what slhc_init() returns, whether that is an error or not. In particular, the pattern in sl_alloc_bufs() is slcomp = slhc_init(16, 16); ... slhc_free(slcomp); for the error handling path, and rather than complicate that code, just make it ok to always free what was returned by the init function. That's what the code used to do before commit 4ab42d78 ("ppp, slip: Validate VJ compression slot parameters completely") when slhc_init() just returned NULL for the error case, with no actual indication of the details of the error. Reported-by: syzbot+45474c076a4927533d2e@syzkaller.appspotmail.com Fixes: 4ab42d78 ("ppp, slip: Validate VJ compression slot parameters completely") Acked-by: NBen Hutchings <ben@decadent.org.uk> Cc: David Miller <davem@davemloft.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Maarten Lankhorst 提交于
commit 462ce5d963f18b71c63f6b7730a35a2ee5273540 upstream. A pointer to crtc was missing, resulting in the following build error: drivers/gpu/drm/vc4/vc4_crtc.c:1045:44: sparse: sparse: incorrect type in argument 1 (different base types) drivers/gpu/drm/vc4/vc4_crtc.c:1045:44: sparse: expected struct drm_crtc *crtc drivers/gpu/drm/vc4/vc4_crtc.c:1045:44: sparse: got struct drm_crtc_state *state drivers/gpu/drm/vc4/vc4_crtc.c:1045:39: sparse: sparse: not enough arguments for function vc4_crtc_destroy_state Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Reported-by: Nkbuild test robot <lkp@intel.com> Cc: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/2b6ed5e6-81b0-4276-8860-870b54ca3262@linux.intel.com Fixes: d08106796a78 ("drm/vc4: Fix memory leak during gpu reset.") Cc: <stable@vger.kernel.org> # v4.6+ Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Dave Airlie 提交于
commit 9fa24625 upstream. This reverts commit d179b88d. This commit is documented to break userspace X.org modesetting driver in certain configurations. The X.org modesetting userspace driver is broken. No fixes are available yet. In order for this patch to be applied it either needs a config option or a workaround developed. This has been reported a few times, saying it's a userspace problem is clearly against the regression rules. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109806Signed-off-by: NDave Airlie <airlied@redhat.com> Cc: <stable@vger.kernel.org> # v3.19+ Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Maarten Lankhorst 提交于
commit d08106796a78a4273e39e1bbdf538dc4334b2635 upstream. __drm_atomic_helper_crtc_destroy_state does not free memory, it only cleans it up. Fix this by calling the functions own destroy function. Fixes: 6d6e5003 ("drm/vc4: Allocate the right amount of space for boot-time CRTC state.") Cc: Eric Anholt <eric@anholt.net> Cc: <stable@vger.kernel.org> # v4.6+ Reviewed-by: NEric Anholt <eric@anholt.net> Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190301125627.7285-2-maarten.lankhorst@linux.intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Michael Ellerman 提交于
commit 8adddf34 upstream. Joel reported weird crashes using skiroot_defconfig, in his case we jumped into an NX page: kernel tried to execute exec-protected page (c000000002bff4f0) - exploit attempt? (uid: 0) BUG: Unable to handle kernel instruction fetch Faulting instruction address: 0xc000000002bff4f0 Looking at the disassembly, we had simply branched to that address: c000000000c001bc 49fff335 bl c000000002bff4f0 But that didn't match the original kernel image: c000000000c001bc 4bfff335 bl c000000000bff4f0 <kobject_get+0x8> When STRICT_KERNEL_RWX is enabled, and we're using the radix MMU, we call radix__change_memory_range() late in boot to change page protections. We do that both to mark rodata read only and also to mark init text no-execute. That involves walking the kernel page tables, and clearing _PAGE_WRITE or _PAGE_EXEC respectively. With radix we may use hugepages for the linear mapping, so the code in radix__change_memory_range() uses eg. pmd_huge() to test if it has found a huge mapping, and if so it stops the page table walk and changes the PMD permissions. However if the kernel is built without HUGETLBFS support, pmd_huge() is just a #define that always returns 0. That causes the code in radix__change_memory_range() to incorrectly interpret the PMD value as a pointer to a PTE page rather than as a PTE at the PMD level. We can see this using `dv` in xmon which also uses pmd_huge(): 0:mon> dv c000000000000000 pgd @ 0xc000000001740000 pgdp @ 0xc000000001740000 = 0x80000000ffffb009 pudp @ 0xc0000000ffffb000 = 0x80000000ffffa009 pmdp @ 0xc0000000ffffa000 = 0xc00000000000018f <- this is a PTE ptep @ 0xc000000000000100 = 0xa64bb17da64ab07d <- kernel text The end result is we treat the value at 0xc000000000000100 as a PTE and clear _PAGE_WRITE or _PAGE_EXEC, potentially corrupting the code at that address. In Joel's specific case we cleared the sign bit in the offset of the branch, causing a backward branch to turn into a forward branch which caused us to branch into a non-executable page. However the exact nature of the crash depends on kernel version, compiler version, and other factors. We need to fix radix__change_memory_range() to not use accessors that depend on HUGETLBFS, but we also have radix memory hotplug code that uses pmd_huge() etc that will also need fixing. So for now just disallow the broken combination of Radix with HUGETLBFS disabled. The only defconfig we have that is affected is skiroot_defconfig, so turn on HUGETLBFS there so that it still gets Radix. Fixes: 566ca99a ("powerpc/mm/radix: Add dummy radix_enabled()") Cc: stable@vger.kernel.org # v4.7+ Reported-by: NJoel Stanley <joel@jms.id.au> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Ard Biesheuvel 提交于
commit e17b1af96b2afc38e684aa2f1033387e2ed10029 upstream. The EFI stub is entered with the caches and MMU enabled by the firmware, and once the stub is ready to hand over to the decompressor, we clean and disable the caches. The cache clean routines use CP15 barrier instructions, which can be disabled via SCTLR. Normally, when using the provided cache handling routines to enable the caches and MMU, this bit is enabled as well. However, but since we entered the stub with the caches already enabled, this routine is not executed before we call the cache clean routines, resulting in undefined instruction exceptions if the firmware never enabled this bit. So set the bit explicitly in the EFI entry code, but do so in a way that guarantees that the resulting code can still run on v6 cores as well (which are guaranteed to have CP15 barriers enabled) Cc: <stable@vger.kernel.org> # v4.9+ Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Achim Dahlhoff 提交于
commit 6e7da747 upstream. The tx_status poll in the rcar_dmac driver reads the status register which indicates which chunk is busy (DMACHCRB). Afterwards the point inside the chunk is read from DMATCRB. It is possible that the chunk has changed between the two reads. The result is a non-monotonous increase of the residue. Fix this by introducing a 'safe read' logic. Fixes: 73a47bd0 ("dmaengine: rcar-dmac: use TCRB instead of TCR for residue") Signed-off-by: NAchim Dahlhoff <Achim.Dahlhoff@de.bosch.com> Signed-off-by: NDirk Behme <dirk.behme@de.bosch.com> Reviewed-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: <stable@vger.kernel.org> # v4.16+ Signed-off-by: NVinod Koul <vkoul@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Dirk Behme 提交于
commit 907bd68a upstream. Having a cyclic DMA, a residue 0 is not an indication of a completed DMA. In case of cyclic DMA make sure that dma_set_residue() is called and with this a residue of 0 is forwarded correctly to the caller. Fixes: 3544d287 ("dmaengine: rcar-dmac: use result of updated get_residue in tx_status") Signed-off-by: NDirk Behme <dirk.behme@de.bosch.com> Signed-off-by: NAchim Dahlhoff <Achim.Dahlhoff@de.bosch.com> Signed-off-by: NHiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: NYao Lihua <ylhuajnu@outlook.com> Reviewed-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by: NVinod Koul <vkoul@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Lucas Stach 提交于
commit 3a349763 upstream. Currently any changed config register values don't take effect, as the function to write them back is called with the wrong register offset. Fixes: ff8f8370 (Input: synaptics-rmi4 - add support for 2D sensors and F11) Signed-off-by: NLucas Stach <l.stach@pengutronix.de> Reviewed-by: NPhilipp Zabel <p.zabel@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Harry Pan 提交于
commit 82c99f7a upstream. Kaby Lake (and Coffee Lake) has PC8/PC9/PC10 residency counters. This patch updates the list of Kaby/Coffee Lake PMU event counters from the snb_cstates[] list of events to the hswult_cstates[] list of events, which keeps all previously supported events and also adds the PKG_C8, PKG_C9 and PKG_C10 residency counters. This allows user space tools to profile them through the perf interface. Signed-off-by: NHarry Pan <harry.pan@intel.com> Cc: <stable@vger.kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: gs0622@gmail.com Link: http://lkml.kernel.org/r/20190424145033.1924-1-harry.pan@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 NeilBrown 提交于
commit d58431ea upstream. A recent commit added a call to cache_fresh_locked() when an expired item was found. The call sets the CACHE_VALID flag, so it is important that the item actually is valid. There are two ways it could be valid: 1/ If ->update has been called to fill in relevant content 2/ if CACHE_NEGATIVE is set, to say that content doesn't exist. An expired item that is waiting for an update will be neither. Setting CACHE_VALID will mean that a subsequent call to cache_put() will be likely to dereference uninitialised pointers. So we must make sure the item is valid, and we already have code to do that in try_to_negate_entry(). This takes the hash lock and so cannot be used directly, so take out the two lines that we need and use them. Now cache_fresh_locked() is certain to be called only on a valid item. Cc: stable@kernel.org # 2.6.35 Fixes: 4ecd55ea ("sunrpc: fix cache_head leak due to queued request") Signed-off-by: NNeilBrown <neilb@suse.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Trond Myklebust 提交于
commit e6abc8ca upstream. If there are multiple callbacks queued, waiting for the callback slot when the callback gets shut down, then they all currently end up acting as if they hold the slot, and call nfsd4_cb_sequence_done() resulting in interesting side-effects. In addition, the 'retry_nowait' path in nfsd4_cb_sequence_done() causes a loop back to nfsd4_cb_prepare() without first freeing the slot, which causes a deadlock when nfsd41_cb_get_slot() gets called a second time. This patch therefore adds a boolean to track whether or not the callback did pick up the slot, so that it can do the right thing in these 2 cases. Cc: stable@vger.kernel.org Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Yan, Zheng 提交于
commit 37659182bff1eeaaeadcfc8f853c6d2b6dbc3f47 upstream. We missed two places that i_wrbuffer_ref_head, i_wr_ref, i_dirty_caps and i_flushing_caps may change. When they are all zeros, we should free i_head_snapc. Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/38224Reported-and-tested-by: NLuis Henriques <lhenriques@suse.com> Signed-off-by: N"Yan, Zheng" <zyan@redhat.com> Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Jeff Layton 提交于
commit 76a495d666e5043ffc315695f8241f5e94a98849 upstream. Take the d_lock here to ensure that d_name doesn't change. Cc: stable@vger.kernel.org Signed-off-by: NJeff Layton <jlayton@kernel.org> Reviewed-by: N"Yan, Zheng" <zyan@redhat.com> Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Jeff Layton 提交于
commit 1bcb344086f3ecf8d6705f6d708441baa823beb3 upstream. Ben reported tripping the BUG_ON in create_request_message during some performance testing. Analysis of the vmcore showed that the length of the r_dentry->d_name string changed after we allocated the buffer, but before we encoded it. build_dentry_path returns pointers to d_name in the common case of non-snapped dentries, but this optimization isn't safe unless the parent directory is locked. When it isn't, have the code make a copy of the d_name while holding the d_lock. Cc: stable@vger.kernel.org Reported-by: NBen England <bengland@redhat.com> Signed-off-by: NJeff Layton <jlayton@kernel.org> Reviewed-by: N"Yan, Zheng" <zyan@redhat.com> Signed-off-by: NIlya Dryomov <idryomov@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Xie XiuQi 提交于
commit a860fa7b upstream. sched_clock_cpu() may not be consistent between CPUs. If a task migrates to another CPU, then se.exec_start is set to that CPU's rq_clock_task() by update_stats_curr_start(). Specifically, the new value might be before the old value due to clock skew. So then if in numa_get_avg_runtime() the expression: 'now - p->last_task_numa_placement' ends up as -1, then the divider '*period + 1' in task_numa_placement() is 0 and things go bang. Similar to update_curr(), check if time goes backwards to avoid this. [ peterz: Wrote new changelog. ] [ mingo: Tweaked the code comment. ] Signed-off-by: NXie XiuQi <xiexiuqi@huawei.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: cj.chengjian@huawei.com Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20190425080016.GX11158@hirez.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com> Conflicts: kernel/sched/fair.c [yyl: adjust context] Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Jason Gunthorpe 提交于
commit c660133c339f9ab684fdf568c0d51b9ae5e86002 upstream. The intent of this VMA was to be read-only from user space, but the VM_MAYWRITE masking was missed, so mprotect could make it writable. Cc: stable@vger.kernel.org Fixes: 5c99eaec ("IB/mlx5: Mmap the HCA's clock info to user-space") Signed-off-by: NJason Gunthorpe <jgg@mellanox.com> Reviewed-by: NHaggai Eran <haggaie@mellanox.com> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Josh Collier 提交于
commit 7c39f7f6 upstream. Current implementation was not properly handling frwr memory registrations. This was uncovered by commit 27f26cec761das ("xprtrdma: Plant XID in on-the-wire RDMA offset (FRWR)") in which xprtrdma, which is used for NFS over RDMA, started failing as it was the first ULP to modify the ib_mr iova resulting in the NFS server getting REMOTE ACCESS ERROR when attempting to perform RDMA Writes to the client. The fix is to properly capture the true iova, offset, and length in the call to ib_map_mr_sg, and then update the iova when processing the IB_WR_REG_MEM on the send queue. Fixes: a41081aa ("IB/rdmavt: Add support for ib_map_mr_sg") Cc: stable@vger.kernel.org Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: NMichael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: NJosh Collier <josh.d.collier@intel.com> Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Peter Zijlstra 提交于
commit d6097c9e upstream. Unless the very next line is schedule(), or implies it, one must not use preempt_enable_no_resched(). It can cause a preemption to go missing and thereby cause arbitrary delays, breaking the PREEMPT=y invariant. Link: http://lkml.kernel.org/r/20190423200318.GY14281@hirez.programming.kicks-ass.net Cc: Waiman Long <longman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: the arch/x86 maintainers <x86@kernel.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: huang ying <huang.ying.caritas@gmail.com> Cc: Roman Gushchin <guro@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: stable@vger.kernel.org Fixes: 2c2d7329 ("tracing/ftrace: use preempt_enable_no_resched_notrace in ring_buffer_time_stamp()") Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Aurelien Jarno 提交于
commit 79b4a9cf upstream. Commit 4c21b8fd (MIPS: seccomp: Handle indirect system calls (o32)) added indirect syscall detection for O32 processes running on MIPS64, but it did not work correctly for big endian kernel/processes. The reason is that the syscall number is loaded from ARG1 using the lw instruction while this is a 64-bit value, so zero is loaded instead of the syscall number. Fix the code by using the ld instruction instead. When running a 32-bit processes on a 64 bit CPU, the values are properly sign-extended, so it ensures the value passed to syscall_trace_enter is correct. Recent systemd versions with seccomp enabled whitelist the getpid syscall for their internal processes (e.g. systemd-journald), but call it through syscall(SYS_getpid). This fix therefore allows O32 big endian systems with a 64-bit kernel to run recent systemd versions. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Cc: <stable@vger.kernel.org> # v3.15+ Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: NPaul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 YueHaibing 提交于
commit ae3d6a323347940f0548bbb4b17f0bb2e9164169 upstream. If CONFIG_TEST_KMOD is set to M, while CONFIG_BLOCK is not set, XFS and BTRFS can not be compiled successly. Link: http://lkml.kernel.org/r/20190410075434.35220-1-yuehaibing@huawei.com Fixes: d9c6a72d ("kmod: add test driver to stress test the module loader") Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Reported-by: NHulk Robot <hulkci@huawei.com> Reviewed-by: NKees Cook <keescook@chromium.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Jérôme Glisse 提交于
commit e153abc0739ff77bd89c9ba1688cdb963464af97 upstream. When scheduling work item to read page we need to pass down the proper bvec struct which points to the page to read into. Before this patch it uses a randomly initialized bvec (only if PAGE_SIZE != 4096) which is wrong. Note that without this patch on arch/kernel where PAGE_SIZE != 4096 userspace could read random memory through a zram block device (thought userspace probably would have no control on the address being read). Link: http://lkml.kernel.org/r/20190408183219.26377-1-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Reviewed-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: NMinchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Baolin Wang 提交于
commit 102bbe34 upstream. When setting sync EIC as IRQ_TYPE_EDGE_BOTH type, we missed to set the SPRD_EIC_SYNC_INTMODE register to 0, which means detecting edge signals. Thus this patch fixes the issue. Fixes: 25518e02 ("gpio: Add Spreadtrum EIC driver support") Cc: <stable@vger.kernel.org> Signed-off-by: NBaolin Wang <baolin.wang@linaro.org> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Jann Horn 提交于
commit b9872226 upstream. This fixes multiple issues in buffer_pipe_buf_ops: - The ->steal() handler must not return zero unless the pipe buffer has the only reference to the page. But generic_pipe_buf_steal() assumes that every reference to the pipe is tracked by the page's refcount, which isn't true for these buffers - buffer_pipe_buf_get(), which duplicates a buffer, doesn't touch the page's refcount. Fix it by using generic_pipe_buf_nosteal(), which refuses every attempted theft. It should be easy to actually support ->steal, but the only current users of pipe_buf_steal() are the virtio console and FUSE, and they also only use it as an optimization. So it's probably not worth the effort. - The ->get() and ->release() handlers can be invoked concurrently on pipe buffers backed by the same struct buffer_ref. Make them safe against concurrency by using refcount_t. - The pointers stored in ->private were only zeroed out when the last reference to the buffer_ref was dropped. As far as I know, this shouldn't be necessary anyway, but if we do it, let's always do it. Link: http://lkml.kernel.org/r/20190404215925.253531-1-jannh@google.com Cc: Ingo Molnar <mingo@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org Fixes: 73a757e6 ("ring-buffer: Return reader page back into existing ring buffer") Signed-off-by: NJann Horn <jannh@google.com> Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com> Conflicts: kernel/trace/trace.c include/linux/pipe_fs_i.h [yyl: adjust context] Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-
由 Wenwen Wang 提交于
commit 91862cc7 upstream. In trace_pid_write(), the buffer for trace parser is allocated through kmalloc() in trace_parser_get_init(). Later on, after the buffer is used, it is then freed through kfree() in trace_parser_put(). However, it is possible that trace_pid_write() is terminated due to unexpected errors, e.g., ENOMEM. In that case, the allocated buffer will not be freed, which is a memory leak bug. To fix this issue, free the allocated buffer when an error is encountered. Link: http://lkml.kernel.org/r/1555726979-15633-1-git-send-email-wang6495@umn.edu Fixes: f4d34a87 ("tracing: Use pid bitmap instead of a pid array for set_event_pid") Cc: stable@vger.kernel.org Signed-off-by: NWenwen Wang <wang6495@umn.edu> Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
-