- don't stop the caching thread until btrfs_commit_super return.

- if caching is interrupted by umount, set last to (u64)-1.
  otherwise the un-scanned range of block group will be considered
  as free extent.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

We are racy with async block caching and unpinning extents.  This patch makes
things much less complicated by only unpinning the extent if the block group is
cached.  We check the block_group->cached var under the block_group->lock spin
lock.  If it is set to BTRFS_CACHE_FINISHED then we update the pinned counters,
and unpin the extent and add the free space back.  If it is not set to this, we
start the caching of the block group so the next time we unpin extents we can
unpin the extent.  This keeps us from racing with the async caching threads,
lets us kill the fs wide async thread counter, and keeps us from having to set
DELALLOC bits for every extent we hit if there are caching kthreads going.

One thing that needed to be changed was btrfs_free_super_mirror_extents.  Now
instead of just looking for LOCKED extents, we also look for DIRTY extents,
since we could have left some extents pinned in the previous transaction that
will never get freed now that we are unmounting, which would cause us to leak
memory.  So btrfs_free_super_mirror_extents has been changed to
btrfs_free_pinned_extents, and it will clear the extents locked for the super
mirror, and any remaining pinned extents that may be present.  Thank you,
Signed-off-by: NJosef Bacik <jbacik@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch moves the caching of the block group off to a kthread in order to
allow people to allocate sooner.  Instead of blocking up behind the caching
mutex, we instead kick of the caching kthread, and then attempt to make an
allocation.  If we cannot, we wait on the block groups caching waitqueue, which
the caching kthread will wake the waiting threads up everytime it finds 2 meg
worth of space, and then again when its finished caching.  This is how I tested
the speedup from this

mkfs the disk
mount the disk
fill the disk up with fs_mark
unmount the disk
mount the disk
time touch /mnt/foo

Without my changes this took 11 seconds on my box, with these changes it now
takes 1 second.

Another change thats been put in place is we lock the super mirror's in the
pinned extent map in order to keep us from adding that stuff as free space when
caching the block group.  This doesn't really change anything else as far as the
pinned extent map is concerned, since for actual pinned extents we use
EXTENT_DIRTY, but it does mean that when we unmount we have to go in and unlock
those extents to keep from leaking memory.

I've also added a check where when we are reading block groups from disk, if the
amount of space used == the size of the block group, we go ahead and mark the
block group as cached.  This drastically reduces the amount of time it takes to
cache the block groups.  Using the same test as above, except doing a dd to a
file and then unmounting, it used to take 33 seconds to umount, now it takes 3
seconds.

This version uses the commit_root in the caching kthread, and then keeps track
of how many async caching threads are running at any given time so if one of the
async threads is still running as we cross transactions we can wait until its
finished before handling the pinned extents.  Thank you,
Signed-off-by: NJosef Bacik <jbacik@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

If the tree roots hit read errors during mount, btrfs is not properly
erroring out.  We need to check the uptodate bits after
reading in the tree root node.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

write_dev_supers is called in sequence.  First is it called with wait == 0,
which starts IO on all of the super blocks for a given device.  Then it is
called with wait == 1 to make sure they all reach the disk.

It doesn't currently pin the buffers between the two calls, and it also
assumes the buffers won't go away between the two calls, leading to
an oops if the VM manages to free the buffers in the middle of the sync.

This fixes that assumption and updates the code to return an error if things
are not up to date when the wait == 1 run is done.
Signed-off-by: NHisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

On multi-device filesystems, btrfs writes supers to all of the devices
before considering a sync complete.  There wasn't any additional
locking between super writeout and the device list management code
because device management was done inside a transaction and
super writeout only happened  with no transation writers running.

With the btrfs fsync log and other async transaction updates, this
has been racey for some time.  This adds a mutex to protect
the device list.  The existing volume mutex could not be reused due to
transaction lock ordering requirements.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

There's no need to preserve this abstraction; it used to let us use
hardware crc32c support directly, but libcrc32c is already doing that for us
through the crypto API -- so we're already using the Intel crc32c
acceleration where appropriate.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

During mount, btrfs will check the queue nonrot flag
for all the devices found in the FS.  If they are all
non-rotating, SSD mode is enabled by default.

If the FS was mounted with -o nossd, the non-rotating
flag is ignored.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Once a metadata block has been written, it must be recowed, so the
btrfs dirty balancing call has a check to make sure a fair amount of metadata
was actually dirty before it started writing it back to disk.

A previous commit had changed the dirty tracking for metadata without
updating the btrfs dirty balancing checks.  This commit switches it
to use the correct counter.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This commit introduces a new kind of back reference for btrfs metadata.
Once a filesystem has been mounted with this commit, IT WILL NO LONGER
BE MOUNTABLE BY OLDER KERNELS.

When a tree block in subvolume tree is cow'd, the reference counts of all
extents it points to are increased by one.  At transaction commit time,
the old root of the subvolume is recorded in a "dead root" data structure,
and the btree it points to is later walked, dropping reference counts
and freeing any blocks where the reference count goes to 0.

The increments done during cow and decrements done after commit cancel out,
and the walk is a very expensive way to go about freeing the blocks that
are no longer referenced by the new btree root.  This commit reduces the
transaction overhead by avoiding the need for dead root records.

When a non-shared tree block is cow'd, we free the old block at once, and the
new block inherits old block's references. When a tree block with reference
count > 1 is cow'd, we increase the reference counts of all extents
the new block points to by one, and decrease the old block's reference count by
one.

This dead tree avoidance code removes the need to modify the reference
counts of lower level extents when a non-shared tree block is cow'd.
But we still need to update back ref for all pointers in the block.
This is because the location of the block is recorded in the back ref
item.

We can solve this by introducing a new type of back ref. The new
back ref provides information about pointer's key, level and in which
tree the pointer lives. This information allow us to find the pointer
by searching the tree. The shortcoming of the new back ref is that it
only works for pointers in tree blocks referenced by their owner trees.

This is mostly a problem for snapshots, where resolving one of these
fuzzy back references would be O(number_of_snapshots) and quite slow.
The solution used here is to use the fuzzy back references in the common
case where a given tree block is only referenced by one root,
and use the full back references when multiple roots have a reference
on a given block.

This commit adds per subvolume red-black tree to keep trace of cached
inodes. The red-black tree helps the balancing code to find cached
inodes whose inode numbers within a given range.

This commit improves the balancing code by introducing several data
structures to keep the state of balancing. The most important one
is the back ref cache. It caches how the upper level tree blocks are
referenced. This greatly reduce the overhead of checking back ref.

The improved balancing code scales significantly better with a large
number of snapshots.

This is a very large commit and was written in a number of
pieces.  But, they depend heavily on the disk format change and were
squashed together to make sure git bisect didn't end up in a
bad state wrt space balancing or the format change.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

These debugging WARN_ONs make too much console noise during regular
IO failures.  An IO failure will still generate a number of messages
as we verify checksums etc, but these two are not needed.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Just happened to notice a bunch of %llu vs u64 warnings.  Here's a patch
to cast them all.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Btrfs has printks for various IO errors, including bad checksums and
mismatches between what we expect the block headers to contain and what
we actually find on the disk.

Longer term we need a real reporting mechanism for this, but for now
printk is going to have to do.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Btrfs had some old code sitting around under #if 0, this drops it.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch makes the chunk allocator keep a good ratio of metadata vs data
block groups.  By default for every 8 data block groups, we'll allocate 1
metadata chunk, or about 12% of the disk will be allocated for metadata.  This
can be changed by specifying the metadata_ratio mount option.

This is simply the number of data block groups that have to be allocated to
force a metadata chunk allocation.  By making sure we allocate metadata chunks
more often, we are less likely to get into situations where the whole disk
has been allocated as data block groups.
Signed-off-by: NJosef Bacik <jbacik@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Btrfs is using WRITE_SYNC_PLUG to send down synchronous IOs with a
higher priority.  But, the checksumming helper threads prevent it
from being fully effective.

There are two problems.  First, a big queue of pending checksumming
will delay the synchronous IO behind other lower priority writes.  Second,
the checksumming uses an ordered async work queue.  The ordering makes sure
that IOs are sent to the block layer in the same order they are sent
to the checksumming threads.  Usually this gives us less seeky IO.

But, when we start mixing IO priorities, the lower priority IO can delay
the higher priority IO.

This patch solves both problems by adding a high priority list to the async
helper threads, and a new btrfs_set_work_high_prio(), which is used
to make put a new async work item onto the higher priority list.

The ordering is still done on high priority IO, but all of the high
priority bios are ordered separately from the low priority bios.  This
ordering is purely an IO optimization, it is not involved in data
or metadata integrity.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Part of reducing fsync/O_SYNC/O_DIRECT latencies is using WRITE_SYNC for
writes we plan on waiting on in the near future.  This patch
mirrors recent changes in other filesystems and the generic code to
use WRITE_SYNC when WB_SYNC_ALL is passed and to use WRITE_SYNC for
other latency critical writes.

Btrfs uses async worker threads for checksumming before the write is done,
and then again to actually submit the bios.  The bio submission code just
runs a per-device list of bios that need to be sent down the pipe.

This list is split into low priority and high priority lists so the
WRITE_SYNC IO happens first.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Remove an unneeded return statement and conditional
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Because btrfs is copy-on-write, we end up picking new locations for
blocks very often.  This makes it fairly difficult to maintain perfect
read patterns over time, but we can at least do some optimizations
for writes.

This is done today by remembering the last place we allocated and
trying to find a free space hole big enough to hold more than just one
allocation.  The end result is that we tend to write sequentially to
the drive.

This happens all the time for metadata and it happens for data
when mounted -o ssd.  But, the way we record it is fairly racey
and it tends to fragment the free space over time because we are trying
to allocate fairly large areas at once.

This commit gets rid of the races by adding a free space cluster object
with dedicated locking to make sure that only one process at a time
is out replacing the cluster.

The free space fragmentation is somewhat solved by allowing a cluster
to be comprised of smaller free space extents.  This part definitely
adds some CPU time to the cluster allocations, but it allows the allocator
to consume the small holes left behind by cow.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch removes the pinned_mutex.  The extent io map has an internal tree
lock that protects the tree itself, and since we only copy the extent io map
when we are committing the transaction we don't need it there.  We also don't
need it when caching the block group since searching through the tree is also
protected by the internal map spin lock.
Signed-off-by: NJosef Bacik <jbacik@redhat.com>

Renames and truncates are both common ways to replace old data with new
data.  The filesystem can make an effort to make sure the new data is
on disk before actually replacing the old data.

This is especially important for rename, which many application use as
though it were atomic for both the data and the metadata involved.  The
current btrfs code will happily replace a file that is fully on disk
with one that was just created and still has pending IO.

If we crash after transaction commit but before the IO is done, we'll end
up replacing a good file with a zero length file.  The solution used
here is to create a list of inodes that need special ordering and force
them to disk before the commit is done.  This is similar to the
ext3 style data=ordering, except it is only done on selected files.

Btrfs is able to get away with this because it does not wait on commits
very often, even for fsync (which use a sub-commit).

For renames, we order the file when it wasn't already
on disk and when it is replacing an existing file.  Larger files
are sent to filemap_flush right away (before the transaction handle is
opened).

For truncates, we order if the file goes from non-zero size down to
zero size.  This is a little different, because at the time of the
truncate the file has no dirty bytes to order.  But, we flag the inode
so that it is added to the ordered list on close (via release method).  We
also immediately add it to the ordered list of the current transaction
so that we can try to flush down any writes the application sneaks in
before commit.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Chris says it's safe to kill.
Acked-by: NChris Mason <chris.mason@oracle.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

btrfs_mark_buffer dirty would set dirty bits in the extent_io tree
for the buffers it was dirtying.  This may require a kmalloc and it
was not atomic.  So, anyone who called btrfs_mark_buffer_dirty had to
set any btree locks they were holding to blocking first.

This commit changes dirty tracking for extent buffers to just use a flag
in the extent buffer.  Now that we have one and only one extent buffer
per page, this can be safely done without losing dirty bits along the way.

This also introduces a path->leave_spinning flag that callers of
btrfs_search_slot can use to indicate they will properly deal with a
path returned where all the locks are spinning instead of blocking.

Many of the btree search callers now expect spinning paths,
resulting in better btree concurrency overall.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The delayed reference queue maintains pending operations that need to
be done to the extent allocation tree.  These are processed by
finding records in the tree that are not currently being processed one at
a time.

This is slow because it uses lots of time searching through the rbtree
and because it creates lock contention on the extent allocation tree
when lots of different procs are running delayed refs at the same time.

This commit changes things to grab a cluster of refs for processing,
using a cursor into the rbtree as the starting point of the next search.
This way we walk smoothly through the rbtree.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The extent allocation tree maintains a reference count and full
back reference information for every extent allocated in the
filesystem.  For subvolume and snapshot trees, every time
a block goes through COW, the new copy of the block adds a reference
on every block it points to.

If a btree node points to 150 leaves, then the COW code needs to go
and add backrefs on 150 different extents, which might be spread all
over the extent allocation tree.

These updates currently happen during btrfs_cow_block, and most COWs
happen during btrfs_search_slot.  btrfs_search_slot has locks held
on both the parent and the node we are COWing, and so we really want
to avoid IO during the COW if we can.

This commit adds an rbtree of pending reference count updates and extent
allocations.  The tree is ordered by byte number of the extent and byte number
of the parent for the back reference.  The tree allows us to:

1) Modify back references in something close to disk order, reducing seeks
2) Significantly reduce the number of modifications made as block pointers
are balanced around
3) Do all of the extent insertion and back reference modifications outside
of the performance critical btrfs_search_slot code.

#3 has the added benefit of greatly reducing the btrfs stack footprint.
The extent allocation tree modifications are done without the deep
(and somewhat recursive) call chains used in the past.

These delayed back reference updates must be done before the transaction
commits, and so the rbtree is tied to the transaction.  Throttling is
implemented to help keep the queue of backrefs at a reasonable size.

Since there was a similar mechanism in place for the extent tree
extents, that is removed and replaced by the delayed reference tree.

Yan Zheng <yan.zheng@oracle.com> helped review and fixup this code.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

btrfs_tree_locked was being used to make sure a given extent_buffer was
properly locked in a few places.  But, it wasn't correct for UP compiled
kernels.

This switches it to using assert_spin_locked instead, and renames it to
btrfs_assert_tree_locked to better reflect how it was really being used.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Btrfs is currently using spin_lock_nested with a nested value based
on the tree depth of the block.  But, this doesn't quite work because
the max tree depth is bigger than what spin_lock_nested can deal with,
and because locks are sometimes taken before the level field is filled in.

The solution here is to use lockdep_set_class_and_name instead, and to
set the class before unlocking the pages when the block is read from the
disk and just after init of a freshly allocated tree block.

btrfs_clear_path_blocking is also changed to take the locks in the proper
order, and it also makes sure all the locks currently held are properly
set to blocking before it tries to retake the spinlocks.  Otherwise, lockdep
gets upset about bad lock orderin.

The lockdep magic cam from Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Most of the btrfs metadata operations can be protected by a spinlock,
but some operations still need to schedule.

So far, btrfs has been using a mutex along with a trylock loop,
most of the time it is able to avoid going for the full mutex, so
the trylock loop is a big performance gain.

This commit is step one for getting rid of the blocking locks entirely.
btrfs_tree_lock takes a spinlock, and the code explicitly switches
to a blocking lock when it starts an operation that can schedule.

We'll be able get rid of the blocking locks in smaller pieces over time.
Tracing allows us to find the most common cause of blocking, so we
can start with the hot spots first.

The basic idea is:

btrfs_tree_lock() returns with the spin lock held

btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in
the extent buffer flags, and then drops the spin lock.  The buffer is
still considered locked by all of the btrfs code.

If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops
the spin lock and waits on a wait queue for the blocking bit to go away.

Much of the code that needs to set the blocking bit finishes without actually
blocking a good percentage of the time.  So, an adaptive spin is still
used against the blocking bit to avoid very high context switch rates.

btrfs_clear_lock_blocking() clears the blocking bit and returns
with the spinlock held again.

btrfs_tree_unlock() can be called on either blocking or spinning locks,
it does the right thing based on the blocking bit.

ctree.c has a helper function to set/clear all the locked buffers in a
path as blocking.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Before metadata is written to disk, it is updated to reflect that writeout
has begun.  Once this update is done, the block must be cow'd before it
can be modified again.

This update was originally synchronized by using a per-fs spinlock.  Today
the buffers for the metadata blocks are locked before writeout begins,
and everyone that tests the flag has the buffer locked as well.

So, the per-fs spinlock (called hash_lock for no good reason) is no
longer required.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Tracing shows the delay between when an async thread goes to sleep
and when more work is added is often very short.  This commit adds
a little bit of delay and extra checking to the code right before
we schedule out.

It allows more work to be added to the worker
without requiring notifications from other procs.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

To improve performance, btrfs_sync_log merges tree log sync
requests. But it wrongly merges sync requests for different
tree logs. If multiple tree logs are synced at the same time,
only one of them actually gets synced.

This patch has following changes to fix the bug:

Move most tree log related fields in btrfs_fs_info to
btrfs_root. This allows merging sync requests separately
for each tree log.

Don't insert root item into the log root tree immediately
after log tree is allocated. Root item for log tree is
inserted when log tree get synced for the first time. This
allows syncing the log root tree without first syncing all
log trees.

At tree-log sync, btrfs_sync_log first sync the log tree;
then updates corresponding root item in the log root tree;
sync the log root tree; then update the super block.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

a bug in open_ctree:

struct btrfs_root *open_ctree(..)
{
....
	if (!extent_root || !tree_root || !fs_info ||
	    !chunk_root || !dev_root || !csum_root) {
		err = -ENOMEM;
		goto fail;
//When code flow goes to "fail", fs_info may be NULL or uninitialized.
	}
....

fail:
	btrfs_close_devices(fs_info->fs_devices);// !
	btrfs_mapping_tree_free(&fs_info->mapping_tree);// !

	kfree(extent_root);
	kfree(tree_root);
	bdi_destroy(&fs_info->bdi);// !
...
)
Signed-off-by: NQinghuang Feng <qhfeng.kernel@gmail.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Merge list_for_each* and list_entry to list_for_each_entry*
Signed-off-by: NQinghuang Feng <qhfeng.kernel@gmail.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

kthread_run() returns the kthread or ERR_PTR(-ENOMEM), not NULL.
Signed-off-by: NQinghuang Feng <qhfeng.kernel@gmail.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Removed unused #include <version.h>'s in btrfs
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

There were many, most are fixed now.  struct-funcs.c generates some warnings
but these are bogus.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The data in fs_info->super_for_commit are zeros before the
first transaction commit. If tree log sync and system crash
both occur before the first transaction commit, super block
will get corrupted.

This fixes it by properly filling in the super_for_commit field at
open time.
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

bio_end_io for reads without checksumming on and btree writes were
happening without using async thread pools.  This means the extent_io.c
code had to use spin_lock_irq and friends on the rb tree locks for
extent state.

There were some irq safe vs unsafe lock inversions between the delallock
lock and the extent state locks.  This patch gets rid of them by moving
all end_io code into the thread pools.

To avoid contention and deadlocks between the data end_io processing and the
metadata end_io processing yet another thread pool is added to finish
off metadata writes.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch makes seed device possible to be shared by
multiple mounted file systems. The sharing is achieved
by cloning seed device's btrfs_fs_devices structure.
Thanks you,
Signed-off-by: NYan Zheng <zheng.yan@oracle.com>