Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 29 1月, 2017 2 次提交
  3. 28 1月, 2017 3 次提交
    • W
      iio: stx104: Utilize devm_ functions in driver probe callback · b2d226ca
      由 William Breathitt Gray 提交于 
      The devm_ resource manager functions allow memory to be automatically
released when a device is unbound. This patch takes advantage of the
resource manager functions and replaces the gpiochip_add_data call and
iio_device_register call with the devm_gpiochip_add_data call and
devm_iio_device_register call respectively. In addition, the
stx104_remove function has been removed as no longer necessary due to
the use of the relevant devm_ resource manager functions.
Signed-off-by: NWilliam Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>
      b2d226ca
    • M
      iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs · 3adbf342
      由 Martin Blumenstingl 提交于 
      This adds support for the SAR (Successive Approximation Register) ADC
on the Amlogic Meson SoCs.

The code is based on the public S805 (Meson8b) and S905 (GXBB)
datasheets (see [0] and [1]), as well as by reading (various versions
of) the vendor driver and by inspecting the registers on the vendor
kernels of my testing-hardware.

Currently the GXBB, GXL and GXM SoCs are supported. GXBB hardware has
10-bit ADC resolution, while GXL and GXM have 12-bit ADC resolution.
The code was written to support older SoCs (Meson8 and Meson8b) as well,
but due to lack of actual testing-hardware no of_device_id was added for
these.

Two "features" from the vendor driver are currently missing:
- the vendor driver uses channel #7 for calibration (this improves the
  accuracy of the results - in my tests the results were less than 3%
  off without calibration compared to the vendor driver). Adding support
  for this should be easy, but is not required for most applications.
- channel #6 is connected to the SoCs internal temperature sensor.
  Adding support for this is probably not so easy since (based on the
  u-boot sources) most SoC versions are using different registers and
  algorithms for the conversion from "ADC value" to temperature.

Supported by the hardware but currently not supported by the driver:
- reading multiple channels at the same time (the hardware has a FIFO
  buffer which stores multiple results)
- continuous sampling (this would require a way to enable this
  individually because otherwise the ADC would be drawing power
  constantly)
- interrupt support (similar to the vendor driver this new driver is
  polling the results. It is unclear if the IRQ-mode is supported on
  older (Meson6 or Meson8) hardware as well or if there are any errata)

[0]
http://dn.odroid.com/S805/Datasheet/S805_Datasheet%20V0.8%2020150126.pdf
[1] http://dn.odroid.com/S905/DataSheet/S905_Public_Datasheet_V1.1.4.pdfSigned-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>
      3adbf342
    • M
      iio: adc: Add Renesas GyroADC driver · 059c53b3
      由 Marek Vasut 提交于 
      Add IIO driver for the Renesas RCar GyroADC block. This block is a
simple 4/8-channel ADC which samples 12/15/24 bits of data every
cycle from all channels.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: linux-renesas-soc@vger.kernel.org
Cc: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>
      059c53b3
  5. 22 1月, 2017 3 次提交
  7. 21 1月, 2017 1 次提交
  9. 15 1月, 2017 2 次提交
  11. 11 1月, 2017 7 次提交
  13. 31 12月, 2016 1 次提交
  15. 11 12月, 2016 2 次提交
  17. 03 12月, 2016 2 次提交
  19. 19 11月, 2016 2 次提交
  21. 13 11月, 2016 1 次提交
  23. 12 11月, 2016 1 次提交
  25. 06 11月, 2016 2 次提交
  27. 24 10月, 2016 1 次提交
  29. 09 10月, 2016 1 次提交
  31. 28 9月, 2016 3 次提交
  33. 25 9月, 2016 1 次提交
  35. 18 9月, 2016 1 次提交
    • J
      iio: adc: men_z188_adc: constify iio_info structures · 52ceb773
      由 Julia Lawall 提交于 
      Check for iio_info structures that are only stored in the info field of a
iio_dev structure.  This field is declared const, so iio_info structures
that have this property can be declared as const also.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct iio_info i@p = { ... };

@ok@
identifier r.i;
struct iio_dev e;
position p;
@@
e.info = &i@p;

@bad@
position p != {r.p,ok.p};
identifier r.i;
struct iio_info e;
@@
e@i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct iio_info i = { ... };
// </smpl>

The result of size on this file before the change is:
   text	      data     bss     dec         hex	  filename
   1529	       312       0    1841         731
   drivers/iio/adc/men_z188_adc.o

and after the change it is:
   text	     data        bss	    dec	    hex	filename
   1689       168          0       1857     741
   drivers/iio/adc/men_z188_adc.o
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>
      52ceb773
  37. 06 9月, 2016 2 次提交
  39. 04 9月, 2016 1 次提交
    • W
      iio: stx104: Add IIO support for the ADC channels · 4075a283
      由 William Breathitt Gray 提交于 
      The Apex Embedded Systems STX104 features 16 channels of single-ended (8
channels of true differential) 16-bit analog input. Differential input
configuration may be selected via a physical jumper on the device.
Similarly, input polarity (unipolar/bipolar) is configured via a
physical jumper on the device.

Input gain selection is available to the user via software, thus
allowing eight possible input ranges: +-10V, +-5V, +-2.5V, +-1.25V,
0 to 10V, 0 to 5V, 0 to 2.5V, and 0 to 1.25V. Four input gain
configurations are supported: x1, x2, x4, and x8.

This ADC resolution is 16-bits (1/65536 of full scale). Analog input
samples are taken on software trigger; neither FIFO sampling nor
interrupt triggering is supported by this driver.

The Apex Embedded Systems STX104 is primarily an analog-to-digital
converter device. The STX104 IIO driver was initially placed in the DAC
directory because only the DAC portion of the STX104 was supported at
the time. Now that ADC support has been added to the STX104 IIO driver,
the driver should be moved to the more appropriate ADC directory.
Signed-off-by: NWilliam Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>
      4075a283
  41. 03 9月, 2016 1 次提交