When setting page array information for message data, provide the
byte length rather than the page count ceph_msg_data_set_pages().
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Define a function ceph_msg_data_set_pages(), which more clearly
abstracts the assignment page-related fields for data in a ceph
message structure.  Use this new function in the osd client and mds
client.

Ideally, these fields would never be set more than once (with
BUG_ON() calls to guarantee that).  At the moment though the osd
client sets these every time it receives a message, and in the event
of a communication problem this can happen more than once.  (This
will be resolved shortly, but setting up these helpers first makes
it all a bit easier to work with.)

Rearrange the field order in a ceph_msg structure to group those
that are used to define the possible data payloads.

This partially resolves:
    http://tracker.ceph.com/issues/4263Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Record the byte count for an osd request rather than the page count.
The number of pages can always be derived from the byte count (and
alignment/offset) but the reverse is not true.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

An osd request defines information about where data to be read
should be placed as well as where data to write comes from.
Currently these are represented by common fields.

Keep information about data for writing separate from data to be
read by splitting these into data_in and data_out fields.

This is the key patch in this whole series, in that it actually
identifies which osd requests generate outgoing data and which
generate incoming data.  It's less obvious (currently) that an osd
CALL op generates both outgoing and incoming data; that's the focus
of some upcoming work.

This resolves:
    http://tracker.ceph.com/issues/4127Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

An osd request uses either pages or a bio list for its data.  Use a
union to record information about the two, and add a data type
tag to select between them.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Pull the fields in an osd request structure that define the data for
the request out into a separate structure.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Currently ceph_osdc_new_request() assigns an osd request's
r_num_pages and r_alignment fields.  The only thing it does
after that is call ceph_osdc_build_request(), and that doesn't
need those fields to be assigned.

Move the assignment of those fields out of ceph_osdc_new_request()
and into its caller.  As a result, the page_align parameter is no
longer used, so get rid of it.

Note that in ceph_sync_write(), the value for req->r_num_pages had
already been calculated earlier (as num_pages, and fortunately
it was computed the same way).  So don't bother recomputing it,
but because it's not needed earlier, move that calculation after the
call to ceph_osdc_new_request().  Hold off making the assignment to
r_alignment, doing it instead r_pages and r_num_pages are
getting set.

Similarly, in start_read(), nr_pages already holds the number of
pages in the array (and is calculated the same way), so there's no
need to recompute it.  Move the assignment of the page alignment
down with the others there as well.

This and the next few patches are preparation work for:
    http://tracker.ceph.com/issues/4127Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The purpose of ceph_calc_object_layout() is to fill in the pool
number and seed for a ceph_pg structure provided, based on a given
osd map and target object id.

Currently that function takes a file layout parameter, but the only
thing used out of that is its pool number.

Change the function so it takes a pool number rather than the full
file layout structure.  Only update the ceph_pg if the pool is found
in the osd map.  Get rid of few useless lines of code from the
function while there.

Since the function now very clearly just fills in the ceph_pg
structure it's provided, rename it ceph_calc_ceph_pg().
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The new cases added to osd_req_encode_op() caused a new sparse
error, which highlighted an existing problem that had been
overlooked since it was originally checked in.  When an unsupported
opcode is found the destination rather than the source opcode was
being used in the error message.  The two differ in their byte
order, and we want to be using the one in the source.

Fix the problem in both spots.
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

An osd request marked to linger will be re-submitted in the event
a connection to the target osd gets dropped.  Currently, if there
is a callback function associated with a request it will be called
each time a request is submitted--which for lingering requests can
be more than once.

Change it so a request--including lingering ones--will get completed
(from the perspective of the user of the osd client) exactly once.

This resolves:
    http://tracker.ceph.com/issues/3967Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The page alignment field for a request is currently set in
ceph_osdc_build_request().  It's not needed at that point
nor do either of its callers need that value assigned at
any point before they call ceph_osdc_start_request().

So move that assignment into ceph_osdc_start_request().
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Use distinct fields for tracking the number of pages in a message's
page array and in a message's page list.  Currently only one or the
other is used at a time, but that will be changing soon.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The only remaining reason to pass the osd request to calc_layout()
is to fill in its r_num_pages and r_page_alignment fields.  Once it
fills those in, it doesn't do anything more with them.

We can therefore move those assignments into the caller, and get rid
of the "req" parameter entirely.

Note, however, that the only caller is ceph_osdc_new_request(),
and that immediately overwrites those fields with values based on
its passed-in page offset.  So the assignment inside calc_layout()
was redundant anyway.

This resolves:
    http://tracker.ceph.com/issues/4262Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Move the formatting of the object name (oid) to use for an object
request into the caller of calc_layout().  This makes the "vino"
parameter no longer necessary, so get rid of it.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Have calc_layout() pass the computed object number back to its
caller.  (This is a small step to simplify review.)
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

If an invalid layout is provided to ceph_osdc_new_request(), its
call to calc_layout() might return an error.  At that point in the
function we've already allocated an osd request structure, so we
need to free it (drop a reference) in the event such an error
occurs.

The only other value calc_layout() will return is 0, so make that
explicit in the successful case.

This resolves:
    http://tracker.ceph.com/issues/4240Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Use the new version of the encoding for osd requests and replies.  In the
process, update the way we are tracking request ops and reply lengths and
results in the struct ceph_osd_request.  Update the rbd and fs/ceph users
appropriately.

The main changes are:
 - we keep pointers into the request memory for fields we need to update
   each time the request is sent out over the wire
 - we keep information about the result in an array in the request struct
   where the users can easily get at it.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

Instead of using the old ceph_object_layout struct, update our internal
ceph_calc_object_layout method to use the ceph_pg type.  This allows us to
pass the full 32-bit precision of the pgid.seed to the callers.  It also
allows some callers to avoid reaching into the request structures for the
struct ceph_object_layout fields.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

Always decode data into our cpu-native ceph_pg type that has the correct
field widths.  Limit any remaining uses of ceph_pg_v1 to dealing with the
legacy protocol.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

Rename the old version this type to distinguish it from the new version.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

Add support for CEPH_OSD_OP_STAT operations in the osd client
and in rbd.

This operation sends no data to the osd; everything required is
encoded in identity of the target object.

The result will be ENOENT if the object doesn't exist.  If it does
exist and no other error occurs the server returns the size and last
modification time of the target object as output data (in little
endian format).  The size is a 64 bit unsigned and the time is
ceph_timespec structure (two unsigned 32-bit integers, representing
a seconds and nanoseconds value).

This resolves:
    http://tracker.ceph.com/issues/4007Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Simplify the way the data length recorded in a message header is
calculated in ceph_osdc_build_request().
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

In osd_req_encode_op() there are a few cases that handle osd
opcodes that are never used in the kernel.  The presence of
this code gives the impression it's correct (which really can't
be assumed), and may impose some unnecessary restrictions on
some upcoming refactoring of this code.

So delete this effectively dead code, and report uses of the
previously handled cases as unsupported.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

If osd_req_encode_op() is given any opcode it doesn't recognize
it reports an error.

This patch fleshes out that routine to distinguish between
well-defined but unsupported values and values that are simply
bogus.

This and the next commit are related to:
    http://tracker.ceph.com/issues/4126Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

There are no actual users of ceph_osdc_wait_event().  This would
have been one-shot events, but we no longer support those so just
get rid of this function.

Since this leaves nothing else that waits for the completion of an
event, we can get rid of the completion in a struct ceph_osd_event.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

There is only one caller of ceph_osdc_create_event(), and it
provides 0 as its "one_shot" argument.  Get rid of that argument and
just use 0 in its place.

Replace the code in handle_watch_notify() that executes if one_shot
is nonzero in the event with a BUG_ON() call.

While modifying "osd_client.c", give handle_watch_notify() static
scope.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

There is no caller of ceph_calc_raw_layout() outside of libceph, so
there's no need to export from the module.

Furthermore, there is only one caller, in calc_layout(), and it
is not much more than a simple wrapper for that function.

So get rid of ceph_calc_raw_layout() and embed it instead within
calc_layout().

While touching "osd_client.c", get rid of the unnecessary forward
declaration of __send_request().
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The only callers of ceph_osdc_init() and ceph_osdc_stop()
ceph_create_client() and ceph_destroy_client() (respectively)
and they are in the same kernel module as those two functions.
There's therefore no need to export those interfaces, so don't.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Two of the three callers of the osd client's send_queued() function
already hold the osd client mutex and drop it before the call.

Change send_queued() so it assumes the caller holds the mutex, and
update all callers accordingly.  Rename it __send_queued() to match
the convention used elsewhere in the file with respect to the lock.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The "num_reply" parameter to ceph_osdc_new_request() is never
used inside that function, so get rid of it.

Note that ceph_sync_write() passes 2 for that argument, while all
other callers pass 1.  It doesn't matter, but perhaps someone should
verify this doesn't indicate a problem.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

There is only one caller of ceph_osdc_writepages(), and it always
passes 0 as its "flags" argument.  Get rid of that argument and
replace its use in ceph_osdc_writepages() with 0.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

There is only one caller of ceph_osdc_writepages(), and it always
passes 0 as its "dosync" argument.  Get rid of that argument and
replace its use in ceph_osdc_writepages() with 0.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

There is only one caller of ceph_osdc_writepages(), and it always
passes the value true as its "nofail" argument.  Get rid of that
argument and replace its use in ceph_osdc_writepages() with the
constant value true.

This and a number of cleanup patches that follow resolve:
    http://tracker.ceph.com/issues/4126Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

There is a check in the completion path for osd requests that
ensures the number of pages allocated is enough to hold the amount
of incoming data expected.

For bio requests coming from rbd the "number of pages" is not really
meaningful (although total length would be).  So stop requiring that
nr_pages be supplied for bio requests.  This is done by checking
whether the pages pointer is null before checking the value of
nr_pages.

Note that this value is passed on to the messenger, but there it's
only used for debugging--it's never used for validation.

While here, change another spot that used r_pages in a debug message
inappropriately, and also invalidate the r_con_filling_msg pointer
after dropping a reference to it.

This resolves:
    http://tracker.ceph.com/issues/3875Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Currently, if the OSD client finds an osd request has had a bio list
attached to it, it drops a reference to it (or rather, to the first
entry on that list) when the request is released.

The code that added that reference (i.e., the rbd client) is
therefore required to take an extra reference to that first bio
structure.

The osd client doesn't really do anything with the bio pointer other
than transfer it from the osd request structure to outgoing (for
writes) and ingoing (for reads) messages.  So it really isn't the
right place to be taking or dropping references.

Furthermore, the rbd client already holds references to all bio
structures it passes to the osd client, and holds them until the
request is completed.  So there's no need for this extra reference
whatsoever.

So remove the bio_put() call in ceph_osdc_release_request(), as
well as its matching bio_get() call in rbd_osd_req_create().

This change could lead to a crash if old libceph.ko was used with
new rbd.ko.  Add a compatibility check at rbd initialization time to
avoid this possibilty.

This resolves:
    http://tracker.ceph.com/issues/3798    and
    http://tracker.ceph.com/issues/3799Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Both ceph_osdc_alloc_request() and ceph_osdc_build_request() are
provided an array of ceph osd request operations.  Rather than just
passing the number of operations in the array, the caller is
required append an additional zeroed operation structure to signal
the end of the array.

All callers know the number of operations at the time these
functions are called, so drop the silly zero entry and supply that
number directly.  As a result, get_num_ops() is no longer needed.
This also means that ceph_osdc_alloc_request() never uses its ops
argument, so that can be dropped.

Also rbd_create_rw_ops() no longer needs to add one to reserve room
for the additional op.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Only one of the two callers of ceph_osdc_alloc_request() provides
page or bio data for its payload.  And essentially all that function
was doing with those arguments was assigning them to fields in the
osd request structure.

Simplify ceph_osdc_alloc_request() by having the caller take care of
making those assignments
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The only thing ceph_osdc_alloc_request() really does with the
flags value it is passed is assign it to the newly-created
osd request structure.  Do that in the caller instead.

Both callers subsequently call ceph_osdc_build_request(), so have
that function (instead of ceph_osdc_alloc_request()) issue a warning
if a request comes through with neither the read nor write flags set.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The osdc parameter to ceph_calc_raw_layout() is not used, so get rid
of it.  Consequently, the corresponding parameter in calc_layout()
becomes unused, so get rid of that as well.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

A snapshot id must be provided to ceph_calc_raw_layout() even though
it is not needed at all for calculating the layout.

Where the snapshot id *is* needed is when building the request
message for an osd operation.

Drop the snapid parameter from ceph_calc_raw_layout() and pass
that value instead in ceph_osdc_build_request().
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>