- 22 7月, 2011 39 次提交
-
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan path - kill priv->vlgrp and mlx4_en_vlan_rx_register Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill jme->vlgrp and jme_vlan_rx_register Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill adapter->vlgrp and igbvf_vlan_rx_register Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill priv->vlgrp and gfar_vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill enic->vlan_group and enic_vlan_rx_register Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill pi->vlan_grp and cxgb4vf_vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool (set_features) Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill adapter->vlan_grp and t1_vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool (set_features) Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill bnad->vlan_grp and bnad_vlan_rx_register Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill adapter->vlgrp and atl1e_vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool (set_features) Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill adapter->vlgrp and atl1c_vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool (set_features) Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill lp->vlgrp and amd8111e_vlan_rx_register Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- remove useless vlan parameters and pointers Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
no longer used Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill port->vgrp and ehea_vlan_rx_register Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- unify vlan and nonvlan rx path - kill nesvnic->vlan_grp and nes_netdev_vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool (set_features) Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Since vlan_group_get_device and vlan_group is not going to be accessible from device drivers, introduce function which substitutes it. Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
else case remained forgotten. Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Conflicts: net/bluetooth/l2cap_core.c
-
由 Matt Evans 提交于
An implementation of a code generator for BPF programs to speed up packet filtering on PPC64, inspired by Eric Dumazet's x86-64 version. Filter code is generated as an ABI-compliant function in module_alloc()'d mem with stackframe & prologue/epilogue generated if required (simple filters don't need anything more than an li/blr). The filter's local variables, M[], live in registers. Supports all BPF opcodes, although "complicated" loads from negative packet offsets (e.g. SKF_LL_OFF) are not yet supported. There are a couple of further optimisations left for future work; many-pass assembly with branch-reach reduction and a register allocator to push M[] variables into volatile registers would improve the code quality further. This currently supports big-endian 64-bit PowerPC only (but is fairly simple to port to PPC32 or LE!). Enabled in the same way as x86-64: echo 1 > /proc/sys/net/core/bpf_jit_enable Or, enabled with extra debug output: echo 2 > /proc/sys/net/core/bpf_jit_enable Signed-off-by: NMatt Evans <matt@ozlabs.org> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
so that ethtool -i will display it correctly on big endian systems. Signed-off-by: NMichael Chan <mchan@broadcom.com> Reviewed-by: NBhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The bnx2fc driver needs to handle netdev events on VLAN devices. Signed-off-by: NMichael Chan <mchan@broadcom.com> Reviewed-by: NBhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Otherwise, the firmware will not respond and we'll have to wait for timeout. Refactor the wait loop we already have into a separate function for this purpose. Signed-off-by: NMichael Chan <mchan@broadcom.com> Reviewed-by: NBhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Include FCoE CID space only for E2_PLUS devices. Remove old CID offset adjustments that are no longer needed. Signed-off-by: NMichael Chan <mchan@broadcom.com> Reviewed-by: NBhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch fixes NVRAM selftest failures for 5720 devices by fixing the checksum area size. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
Newer VPD datablocks can exceed the size the tg3 driver is traditionally used to. This can cause some of the routines that operate on the VPD data to fail when in-fact they could have succeeded had they known the correct size. This patch fixes the problem. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch fixes interrupt selftest failures for recent devices (57765, 5717, 5718. 5719, 5720) by disabling MSI one-shot mode and applying the status tag workaround to the selftest code. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
The current RSS indirection table is populated such that more traffic will hit the first RSS ring. This patch adjusts the indirection table so that the load is more evenly distributed. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch adds the 5719 and the 5720 to the list of devices that are EEE capable. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
Occasionally, when the network cable is removed after a successful autonegotiation, the device will not send a link down interrupt to the driver. This happens because of a bad interaction of an EEE workaround. The fix is to adjust the code so that the root cause condition does not happen. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch increases the scope of the EEE interoperability workaround to include more asic revisions. The workarond value is tuned to workaround a link flap issue at 100Mbps. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
Commit f2096f94, entitled "tg3: Add 5720 H2BMC support", needed to add code to preserve some bits set by firmware. Unfortunately the new code causes throughput to stop after a chip reset because it enables state machines before they are ready. This patch undoes the problematic code. The bits will be restored later in the init sequence. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladislav Zolotarov 提交于
This patch fixes both the failure in the self-test on 578xx and a hole in a parity recovery flow that this failure has discovered: - internal 'pending' state in a VLAN_MAC object wasn't been cleared when the object state change was called with DRV_ONLY flag, which in particular happens when a parity error happens during the self-test. - bp->sp_state wasn't cleared in the similar circumstances as described above. Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladislav Zolotarov 提交于
Fix the parity errors recovery flow for 578xx: - Add a separate column for the 578xx in the parity mask registers DB. - Fix the bnx2x_process_kill_chip_reset() to handle the blocks newly introduced in the 578xx. Cover ATC and PGLUE_B blocks for 57712 and 578xx. Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladislav Zolotarov 提交于
Read FIP MAC address from SHMEM's "port" section similar to what we do in a MF mode when we read it from a "func" section of SHMEM. Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladislav Zolotarov 提交于
Registers dump code erroneously treated 578xx as 57712. This patch fixes the above and also removes unused data structures. Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladislav Zolotarov 提交于
Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 7月, 2011 1 次提交
-
-
由 Chris Friesen 提交于
Some gcc versions warn about prototypes without "inline" when the declaration includes the "inline" keyword. The fix generates a false error message "marked inline, but without a definition" with sparse below 0.4.2. Signed-off-by: NChris Friesen <chris.friesen@genband.com> Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: NPatrick McHardy <kaber@trash.net>
-