Update the PowerPC 4xx git tree to a new location
Signed-off-by: NJosh Boyer <jwboyer@gmail.com>

The AppliedMicro APM8018X embedded processor targets embedded applications that
require low power and a small footprint. It features a PowerPC 405 processor
core built in a 65nm low-power CMOS process with a five-stage pipeline executing
up to one instruction per cycle. The family has 128-kbytes of on-chip memory,
a 128-bit local bus and on-chip DDR2 SDRAM controller with 16-bit interface.
Signed-off-by: NTanmay Inamdar <tinamdar@apm.com>
Signed-off-by: NJosh Boyer <jwboyer@gmail.com>

Since commit 8a0a9bd4, this comment in mmap_rnd() does not
hold true as the value returned by get_random_int() will in fact be

different every single call. Remove the comment and simplify the code
back to its original desired form.

This reverts commit a5adc91a which is no longer necessary and
also fixes the sparc code that copied this same adjustment.
Signed-off-by: NDan McGee <dpmcgee@gmail.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

During kdump stress testing I sometimes see the kdump kernel panic
with:

  Interrupt 0x306 (real) is invalid, disabling it.
  Kernel panic - not syncing: bad return code EOI - rc = -4, value=ff000306

Instead of panicing print the error message, dump the stack the first
time it happens and continue on. Add some more information to the
debug messages as well.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

On a 64bit book3s machine I have an oops from a system reset that
claims the book3e CE bit was set:

MSR: 8000000000021032 <ME,CE,IR,DR>  CR: 24004082  XER: 00000010

On a book3s machine system reset sets IBM bit 46 and 47 depending on
the power saving mode. Separate the definitions by type and for
completeness add the rest of the bits in.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

In lieu of having multiple similiar lines, we can just have one
generic cpu-as line for CONFIG_ALTIVEC
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

CPC925/CPC945 use special window to access host bridge functionality of
u3-ht. Provide a way to access this device.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

As described in the help text in the patch, this token restricts general
access to /dev/mem as a way of increasing the security. Specifically, access
to exclusive IOMEM and kernel RAM is denied unless CONFIG_STRICT_DEVMEM is
set to 'n'.

Implement the 'devmem_is_allowed()' interface for Powerpc. It will be
called from range_is_allowed() when userpsace attempts to access /dev/mem.

This patch is based on an earlier patch from Steve Best and with input from
Paul Mackerras and Scott Wood.

[BenH] Fixed a typo or two and removed the generic change which should
       be submitted as a separate patch
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The patch below removes an extra semicolon.
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
CC: linuxppc-dev@lists.ozlabs.org
CC: Paul Mackerras <paulus@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

On Fri, Nov 11, 2011 at 10:17:55AM +0530, Ananth N Mavinakayanahalli wrote:
> >
> > At this rate we're going to end up with no bits left for CPU features
> > way too quickly... Especially for something we only care about once at
> > boot time.
> >
> > Wouldn't CPU_FTR_PPCAS_ARCH_V2 be a good enough test ?
>
> /me checks Cell manuals... yes, that test would be good enough. I will
> cook up a patch to use this.

Here it is...
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This adds support for p7IOC (and possibly other IODA v1 IO Hubs)
using OPAL v2 interfaces.

We completely take over resource assignment and assign them using an
algorithm that hands out device BARs in a way that makes them fit in
individual segments of the M32 window of the bridge, which enables us
to assign individual PEs to devices and functions.

The current implementation gives out a PE per functions on PCIe, and a
PE for the entire bridge for PCIe to PCI-X bridges.

This can be adjusted / fine tuned later.

We also setup DMA resources (32-bit only for now) and MSIs (both 32-bit
and 64-bit MSI are supported).

The DMA allocation tries to divide the available 256M segments of the
32-bit DMA address space "fairly" among PEs. This is done using a
"weight" heuristic which assigns less value to things like OHCI USB
controllers than, for example SCSI RAID controllers. This algorithm
will probably want some fine tuning for specific devices or device
types.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

It advertises "host bridge" instead of "PCI to PCI bridge" which confuses
the Linux probe code.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This is used for newer IO Hubs such as p7IOC.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

When PCI_REASSIGN_ALL_RSRC is set, we used to clear all bus resources
at the beginning of survey and re-allocate them later.

This changes it so instead, during early fixup, we mark all resources
as IORESOURCE_UNSET and move them down to be 0-based.

Later, if bus resources are still unset at the beginning of the survey,
then we clear them.

This shouldn't impact the re-assignment case on 4xx, but will enable
us to have the platform do some custom resource assignment before the
survey, by clearing individual resources IORESOURCE_UNSET bit.

Also limits the clutter in the kernel log from fixup when re-assigning
since we don't care about the offset applied to the BAR values in this
case.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Some platforms need to perform resource allocation using a custom algorithm
due to HW constraints, or may want to tweak things globally below a host
bridge. For example OPAL support for IODA will need to perform a
resource allocation pass that applies IODA specific segmentation
constraints to MMIO which cannot be done simply using the kernel generic
resource management code.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This adds a pgprot combination required by some cache-enabled IO device
mappings, such as Freescale datapath (QMan and BMan) portals.
Signed-off-by: NGeoff Thorpe <geoff@geoffthorpe.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

All interrupts which must be non threaded are marked
IRQF_NO_THREAD. So it's safe to allow force threaded handlers.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

IPI handlers cannot be threaded. Remove the obsolete IRQF_DISABLED
flag (see commit e58aa3d2) while at it.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Cascade handlers must run in hard interrupt context.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Cascade interrupt must run in hard interrupt context.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The RTAS firmware flash update is conducted using an RTAS call that is
serialized by lock_rtas() which uses spin_lock. While the flash is in
progress, rtasd performs scan for any RTAS events that are generated by
the system. rtasd keeps scanning for the RTAS events generated on the
machine. This is performed via workqueue mechanism. The rtas_event_scan()
also uses an RTAS call to scan the events, eventually trying to acquire
the spin_lock before issuing the request.

The flash update takes a while to complete and during this time, any other
RTAS call has to wait. In this case, rtas_event_scan() waits for a long time
on the spin_lock resulting in a soft lockup.

Fix: Just before the flash update is performed, the queued rtas_event_scan()
work item is cancelled from the work queue so that there is no other RTAS
call issued while the flash is in progress. After the flash completes, the
system reboots and the rtas_event_scan() is rescheduled.
Signed-off-by: NSuzuki Poulose <suzuki@in.ibm.com>
Signed-off-by: NRavi Nittala <ravi.nittala@in.ibm.com>
Reported-by: NDivya Vikas <divya.vikas@in.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This patch add the Chroma platform to WSP/PowerEN, which is a PCIe
card (a defconfig is included).

The card includes an H8 service processor that is used to manage the
card.  The H8 is connected over the second serial UART on the PowerEN
chip so this patch includes a simple 16550 driver to enable
communication, mostly for "power off" and "rebooting".

This patch also includes a, WSP specific, "halt" method that will shut
of all A2 cores but still leave power on at the chip level.  This is
desirable, especially if you wish to interrogate the chip with a
hardware probe after the halt.
Signed-off-by: NJimi Xenidis <jimix@pobox.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Sorry, there was a typo in the #if
signed-off-by: NJimi Xenidis <jimix@pobox.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The 'u' command will print the TLB on book3e parts and the SLB on
Book3s parts, but the help system doesn't say that correctly.
Signed-off-by: NJimi Xenidis <jimix@pobox.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This patch adds a fault handler that responds to illegal Coprocessor
types.  Currently all CTs are treated and illegal.  There are two ways
to report the fault back to the application.  If the application used
the record form ("icswx.") then the architected "reject" is emulated.
If the application did not used the record form ("icswx") then it is
selectable by config whether the failure is silent (as architected) or
a SIGILL is generated.

In all cases pr_warn() is used to log the bad CT.
Signed-off-by: NJimi Xenidis <jimix@pobox.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

ICSWX is also used by the A2 processor to access coprocessors,
although not all "chips" that contain A2s have coprocessors.
Signed-off-by: NJimi Xenidis <jimix@pobox.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Some processors, like embedded, that already have a PID register that
is managed by the system.  This patch separates the ACOP and PID
processing into separate files so that the ACOP code can be shared.
Signed-off-by: NJimi Xenidis <jimix@pobox.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

libio.h is not provided by uClibc, in order to be able to test the
definition of __UCLIBC__ we need to include stdlib.h, which also
includes stddef.h, providing the definition of 'NULL'.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

np is initialized to the result of calling a function that calls
of_node_get, so of_node_put should be called before the pointer is dropped.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e,e1,e2;
@@

* e = \(of_find_node_by_type\|of_find_node_by_name\)(...)
  ... when != of_node_put(e)
      when != true e == NULL
      when != e2 = e
  e = e1
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

np is initialized to the result of calling a function that calls
of_node_get, so of_node_put should be called before the pointer is dropped.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e,e1,e2;
@@

* e = \(of_find_node_by_type\|of_find_node_by_name\)(...)
  ... when != of_node_put(e)
      when != true e == NULL
      when != e2 = e
  e = e1
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Some pseries IOMMUs cache TCEs but don't snoop when the TCEs are changed
in memory, hence we need manually invalidate in software.

This adds code to do the invalidate.  It keys off a device tree property
to say where the to do the MMIO for the invalidate and some information
on what the format of the invalidate including some magic routing info.

it_busno get overloaded with this magic routing info and it_index with
the MMIO address for the invalidate command.

This then gets hooked into the building and freeing of TCEs.

This is only useful on bare metal pseries.  pHyp takes care of this when
virtualised.

Based on patch from Milton with cleanups from Mikey.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

decrementer_check_overflow is called from arch_local_irq_restore so
we want to make it as light weight as possible. As such, turn
decrementer_check_overflow into an inline function.

To avoid a circular mess of includes, separate out the two components
of struct decrementer_clock and keep the struct clock_event_device
part local to time.c.

The fast path improves from:

arch_local_irq_restore
     0:       mflr    r0
     4:       std     r0,16(r1)
     8:       stdu    r1,-112(r1)
     c:       stb     r3,578(r13)
    10:       cmpdi   cr7,r3,0
    14:       beq-    cr7,24 <.arch_local_irq_restore+0x24>
...
    24:       addi    r1,r1,112
    28:       ld      r0,16(r1)
    2c:       mtlr    r0
    30:       blr

to:

arch_local_irq_restore
    0:       std     r30,-16(r1)
    4:       ld      r30,0(r2)
    8:       stb     r3,578(r13)
    c:       cmpdi   cr7,r3,0
   10:       beq-    cr7,6c <.arch_local_irq_restore+0x6c>
...
   6c:       ld      r30,-16(r1)
   70:       blr

Unfortunately we still setup a local TOC (due to -mminimal-toc). Yet
another sign we should be moving to -mcmodel=medium.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Fix some formatting issues and use the DECREMENTER_MAX
define instead of 0x7fffffff.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The clockevents code uses max_delta_ns to avoid calling a
clockevent with too large a value.

Remove the redundant version of this in the timer_interrupt
code.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Use clocksource_register_hz which calculates the shift/mult
factors for us. Also remove the shift = 22 assumption in
vsyscall_update - thanks to Paul Mackerras and John Stultz for
catching that.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We can use clockevents_calc_mult_shift instead of doing all
the work ourselves.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

When re-enabling interrupts we have code to handle edge sensitive
decrementers by resetting the decrementer to 1 whenever it is negative.
If interrupts were disabled long enough that the decrementer wrapped to
positive we do nothing. This means interrupts can be delayed for a long
time until it finally goes negative again.

While we hope interrupts are never be disabled long enough for the
decrementer to go positive, we have a very good test team that can
drive any kernel into the ground. The softlockup data we get back
from these fails could be seconds in the future, completely missing
the cause of the lockup.

We already keep track of the timebase of the next event so use that
to work out if we should trigger a decrementer exception.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Cc: stable@kernel.org
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The UCC UART driver is missing a call to uart_update_timeout().
Without this call, attempting to close the port after outputting large
amounts of data (i.e. using tty and uart buffering) results in long
timeouts before the port will actually be shut down.

For example, cat a large file to a UCC UART port.  With the current
driver, the port will stay open for 30 seconds after the last byte
of data is output.  But with this patch, the port is closed as
expected, just after the data has been output (tx fifos empty).
Signed-off-by: NChuck Meade <chuck@ThePTRGroup.com>
Acked-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

On Freescale parts with multiple MSI controllers, the controllers are
combined into one "pool" of interrupts.  Whenever a device requests an MSI
interrupt, the next available interrupt from the pool is selected,
regardless of which MSI controller the interrupt is from.  This works
because each PCI bus has an ATMU to all of CCSR, so any PCI device can
access any MSI interrupt register.

The fsl,msi property is used to specify that a given PCI bus should only
use a specific MSI device.  This is necessary, for example, with the
Freescale hypervisor, because the MSI devices are assigned to specific
partitions.

Ideally, we'd like to be able to assign MSI devices to PCI busses within
the MSI or PCI layers.  However, there does not appear to be a mechanism
to do that.  Whenever the MSI layer wants to allocate an MSI interrupt to
a PCI device, it just calls arch_setup_msi_irqs().  It would be nice if we
could register an MSI device with a specific PCI bus.

So instead we remember the phandles of each MSI device, and we use that to
limit our search for an available interrupt.  Whenever we are asked to
allocate a new interrupt for a PCI device, we check the fsl,msi property
of the PCI bus for that device.  If it exists, then as we are looping over
all MSI devices, we skip the ones that don't have a matching phandle.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>