It is not called directly outside of the file it's defined in anymore.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Currently emulator returns -1 when emulation failed or IO is needed.
Caller tries to guess whether emulation failed by looking at other
variables. Make it easier for caller to recognise error condition by
always returning -1 in case of failure. For this new emulator
internal return value X86EMUL_IO_NEEDED is introduced. It is used to
distinguish between error condition (which returns X86EMUL_UNHANDLEABLE)
and condition that requires IO exit to userspace to continue emulation.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Fill in run->mmio details in (read|write)_emulated function just like
pio does. There is no point in filling only vcpu fields there just to
copy them into vcpu->run a little bit later.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Currently X86EMUL_PROPAGATE_FAULT, X86EMUL_RETRY_INSTR and
X86EMUL_CMPXCHG_FAILED have the same value so caller cannot
distinguish why function such as emulator_cmpxchg_emulated()
(which can return both X86EMUL_PROPAGATE_FAULT and
X86EMUL_CMPXCHG_FAILED) failed.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Make (get|set)_dr() callback return error if it fails instead of
injecting exception behind emulator's back.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Make set_cr() callback return error if it fails instead of injecting #GP
behind emulator's back.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Use callbacks from x86_emulate_ops to access segments instead of calling
into kvm directly.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

On VMX it is expensive to call get_cached_descriptor() just to get segment
base since multiple vmcs_reads are done instead of only one. Introduce
new call back get_cached_segment_base() for efficiency.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Add (set|get)_msr callbacks to x86_emulate_ops instead of calling
them directly.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Add (set|get)_dr callbacks to x86_emulate_ops instead of calling
them directly.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

ljmp/lcall instruction operand contains address and segment.
It can be 10 bytes long. Currently we decode it as two different
operands. Fix it by introducing new kind of operand that can hold
entire far address.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Make it more explicit what we are checking for.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Dst operand is already initialized during decoding stage. No need to
reinitialize.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This instruction does not need generic decoding for its dst operand.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Introduce read cache which is needed for instruction that require more
then one exit to userspace. After returning from userspace the instruction
will be re-executed with cached read value.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

cr0.ts may change between entries, so we copy cr0 to HOST_CR0 before each
entry.  That is slow, so instead, set HOST_CR0 to have TS set unconditionally
(which is a safe value), and issue a clts() just before exiting vcpu context
if the task indeed owns the fpu.

Saves ~50 cycles/exit.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Annotate it thusly.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Although we always allocate a new dirty bitmap in x86's get_dirty_log(),
it is only used as a zero-source of copy_to_user() and freed right after
that when memslot is clean. This patch uses clear_user() instead of doing
this unnecessary zero-source allocation.

Performance improvement: as we can expect easily, the time needed to
allocate a bitmap is completely reduced. In my test, the improved ioctl
was about 4 to 10 times faster than the original one for clean slots.
Furthermore, reducing memory allocations and copies will produce good
effects to caches too.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

!! is not needed due to the cast to bool.
Signed-off-by: NAvi Kivity <avi@redhat.com>

In common cases, guest SRAO MCE will cause corresponding poisoned page
be un-mapped and SIGBUS be sent to QEMU-KVM, then QEMU-KVM will relay
the MCE to guest OS.

But it is reported that if the poisoned page is accessed in guest
after unmapping and before MCE is relayed to guest OS, userspace will
be killed.

The reason is as follows. Because poisoned page has been un-mapped,
guest access will cause guest exit and kvm_mmu_page_fault will be
called. kvm_mmu_page_fault can not get the poisoned page for fault
address, so kernel and user space MMIO processing is tried in turn. In
user MMIO processing, poisoned page is accessed again, then userspace
is killed by force_sig_info.

To fix the bug, kvm_mmu_page_fault send HWPOISON signal to QEMU-KVM
and do not try kernel and user space MMIO processing for poisoned
page.

[xiao: fix warning introduced by avi]
Reported-by: NMax Asbock <masbock@linux.vnet.ibm.com>
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

HW breakpoints events stopped working correctly with kgdb
as a result of commit: 018cbffe
(Merge commit 'v2.6.33' into perf/core).

The regression occurred because the behavior changed for setting
NOTIFY_STOP as the return value to the die notifier if the breakpoint
was known to the HW breakpoint API.  Because kgdb is using the HW
breakpoint API to register HW breakpoints slots, it must also now
implement the overflow_handler call back else kgdb does not get to see
the events from the die notifier.

The kgdb_ll_trap function will be changed to be general purpose code
which can allow an easy way to implement the hw_breakpoint API
overflow call back.
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
Acked-by: NDongdong Deng <dongdong.deng@windriver.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>

Per the da850/omap-l138 Beta EVM SOM schematic, the DEFDCDC2 and
DEFDCDC3 lines are tied high. This leads to a 3.3V IO and 1.2V CVDD
voltage.

Pass the right platform data to the TPS6507x driver so it can operate
on the DEFDCDC{2,3}_HIGH register to read and change voltage levels.
Signed-off-by: NSekhar Nori <nsekhar@ti.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>

We should use perf_sample_data_init() to initialize struct
perf_sample_data.  As explained in the description of commit dc1d628a
("perf: Provide generic perf_sample_data initialization"), it is
possible for userspace to get the kernel to dereference data.raw,
so if it is not initialized, that means that unprivileged userspace
can possibly oops the kernel.  Using perf_sample_data_init makes sure
it gets initialized to NULL.

This conversion should have been included in commit dc1d628a, but it
got missed.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NKumar Gala <kumar.gala@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The Pstate transition latency check was added for broken F10h BIOSen
which wrongly contain a value of 0 for transition and bus master
latency. Fam11h and later, however, (will) have similar transition
latency so extend that behavior for them too.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
Signed-off-by: NDave Jones <davej@redhat.com>

The PCC cpufreq driver unmaps the mailbox address range if any CPUs fail to
initialise, but doesn't do anything to remove the registered CPUs from the
cpufreq core resulting in failures further down the line. We're better off
simply returning a failure - the cpufreq core will unregister us cleanly if
we end up with no successfully registered CPUs. Tidy up the failure path
and also add a sanity check to ensure that the firmware gives us a realistic
frequency - the core deals badly with that being set to 0.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Signed-off-by: NDave Jones <davej@redhat.com>

Prevent double freeing on error path.
Signed-off-by: NDaniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: NDave Jones <davej@redhat.com>

The pcc specification documents an _OSC method that's incompatible with the
one defined as part of the ACPI spec. This shouldn't be a problem as both
are supposed to be guarded with a UUID. Unfortunately approximately nobody
(including HP, who wrote this spec) properly check the UUID on entry to the
_OSC call. Right now this could result in surprising behaviour if the pcc
driver performs an _OSC call on a machine that doesn't implement the pcc
specification. Check whether the PCCH method exists first in order to reduce
this probability.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Signed-off-by: NDave Jones <davej@redhat.com>

This patch fixes a build failure [1-4] in the atmel_serial code introduced by
patch the patch ARM: 6092/1: atmel_serial: support for RS485
communications (e8faff73)

The build failure was caused by missing struct field and missing defines
for the avr32 board - the patch fixes this.

[1] http://kisskb.ellerman.id.au/kisskb/buildresult/2575242/ - first failure in linux-next, may 11th
[2] http://kisskb.ellerman.id.au/kisskb/buildresult/2816418/ - still exists as of today
[3] http://kisskb.ellerman.id.au/kisskb/buildresult/2617511/ - first failure in Linus' tree - May 20th - did really no one notice this?!
[4] http://kisskb.ellerman.id.au/kisskb/buildresult/2813956/ - still exists in Linus' tree as of today
Signed-off-by: NPeter Huewe <peterhuewe@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Several MIPS platforms don't set pci_controller::io_map_base for their
PCI bridges.  This results in a panic in pci_iomap().  (The panic is
conditional on CONFIG_PCI_DOMAINS, but that is now enabled for all PCI
MIPS systems.)
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Cc: linux-mips@linux-mips.org
Cc: Martin Michlmayr <tbm@cyrius.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: 584784@bugs.debian.org
Patchwork: https://patchwork.linux-mips.org/patch/1377/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Currently, the eth devices are probed in the inverse order, first
au1xxx_eth1_device and then au1xxx_eth0_device. On the GPR board,
this makes trouble:

  # ifconfig|grep HWaddr
  eth0      Link encap:Ethernet  HWaddr 00:50:C2:0C:30:01
  eth1      Link encap:Ethernet  HWaddr 66:22:01:80:38:10

A bogous ethernet hwaddr is assigned to the first device and
au1xxx_eth0_device is mapped to eth1, which even does not work
properly. With this patch, the problems are gone:

  # ifconfig|grep HWaddr
  eth0      Link encap:Ethernet  HWaddr 66:22:11:32:38:10
  eth1      Link encap:Ethernet  HWaddr 66:22:11:32:38:11
Signed-off-by: NWolfgang Grandegger <wg@denx.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1473/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This SoC has only one ethernet MAC, so prevent registration of a second one.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1482/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

For 64-bit, we must use DADDU and DSUBU.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1483/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

As a relativly new ABI N32 should only have received the getdents64(2) but
instead it only had getdents(2).  This was noticed as a performance anomaly
in glibc.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch fixes a regression introduced by commit "MIPS: Alchemy: MTX-1:
Use linux gpio api." (bb706b28) which broke
PCI bus operation. The problem is caused by alchemy_gpio2_enable() which
resets the GPIO2 block. Two PCI signals (PCI_SERR and PCI_RST) are connected
to GPIO2 and they obviously do not to like the reset. Since GPIO2 is
correctly initialized by the boot monitor (YAMON) it is not necessary to
call this function, so just remove it.

Also replace gpio_set_value() with alchemy_gpio_set_value() to avoid
problems in case gpiolib gets initialized after PCI. And since alchemy
gpio_set_value() calls au_sync() we don't have to au_sync() again later.
Signed-off-by: NBruno Randolf <br1@einfach.org>
To: linux-mips@linux-mips.org
To: manuel.lauss@googlemail.com
Patchwork: https://patchwork.linux-mips.org/patch/1448/Tested-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Quoting from Jiri Slaby's patch of a similar nature for x86:

    When initrd is in use and a driver does request_module() in its
    module_init (i.e. __initcall or device_initcall), a modprobe
    process is created with VDSO mapping. But VDSO is inited even in
    __initcall, i.e. on the same level (at the same time), so it may
    not be inited yet (link order matters).

Move init_vdso up to subsys_initcall to avoid the issue.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Patchwork: http://patchwork.linux-mips.org/patch/1386/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

In addition to being useless, it was mis-spelled.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Cc: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1385/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The 4600 family code reads registers to differentiate between two ASIC
variants, but this was being done prior to the register setup. This moves
register setup before the reading code.
Signed-off-by: NDavid VomLehn <dvomlehn@cisco.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1392/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Commit 3fea6026 ("Input: twl40300-keypad - fix handling of "all
ground" rows") broke compilation as I managed to use non-existent
keycodes.
Reported-by: NArjan van de Ven <arjan@infradead.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

qnap_tsx1x_register_flash is only called by qnap_ts219_init and
qnap_ts41x_init which both live in .init.text, too.  So the move is OK.

This fixes the following warning in kirkwood_defconfig:
	WARNING: vmlinux.o(.text+0x9334): Section mismatch in reference from the function qnap_tsx1x_register_flash() to the variable .init.data:qnap_tsx1x_spi_slave_info
	The function qnap_tsx1x_register_flash() references
	the variable __initdata qnap_tsx1x_spi_slave_info.
	This is often because qnap_tsx1x_register_flash lacks a __initdata
	annotation or the annotation of qnap_tsx1x_spi_slave_info is wrong.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: NNicolas Pitre <nico@fluxnic.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

the different putc variants used an initialized local static variable
which is broken since

	5de813b6 (ARM: Eliminate decompressor -Dstatic= PIC hack)

This needs to be initialized at runtime and so needs to be global.
While at it give it a better name.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>