Make use of common cleanup code.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Hold the mapped device's type_lock before calling populate_table() since
it is where the table's type is determined based on the specified
targets.  There is no need to allow concurrent table loads to race to
establish the table's targets or type.

This eliminates the need to grab the lock in dm_table_set_type().

Also verify that the type_lock is held in both dm_set_md_type() and
dm_get_md_type().
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

A device-mapper device must always have a name consisting of a non-empty
string.  If the device also has a uuid, this similarly must not be an
empty string.

The DM_DEV_CREATE ioctl enforces these rules when the device is created,
but this patch is needed to enforce them when DM_DEV_RENAME is used to
change the name or uuid.
Reported-by: NZdenek Kabelac <zkabelac@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Acked-by: NMikulas Patocka <mpatocka@redhat.com>

break_sharing() now handles an arbitrary alloc_data_block() error
the same way as provision_block(): marks pool read-only and errors the
cell.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Acked-by: NJoe Thornber <ejt@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Useful to know which pool is experiencing the error.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Acked-by: NJoe Thornber <ejt@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

It may be useful to switch a request-based table to the "error" target.
Enhance the DM core to allow a hybrid target_type which is capable of
handling either bios (via .map) or requests (via .map_rq).

Add a request-based map function (.map_rq) to the "error" target_type;
making it DM's first hybrid target.  Train dm_table_set_type() to prefer
the mapped device's established type (request-based or bio-based).  If
the mapped device doesn't have an established type default to making the
table with the hybrid target(s) bio-based.

Tested 'dmsetup wipe_table' to work on both bio-based and request-based
devices.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJoe Jin <joe.jin@oracle.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Acked-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Prior to this patch these methods did a lookup followed by an insert.
Instead they now call a common mutate function that adjusts the value
according to a callback function.  This avoids traversing the data
structures twice and hence improves performance.

Also factor out sm_ll_lookup_big_ref_count() for use by both
sm_ll_lookup() and sm_ll_mutate().
Signed-off-by: NJoe Thornber <ejt@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

dm-btree now takes advantage of dm-bufio's ability to prefetch data via
dm_bm_prefetch().  Prior to this change many btree node visits were
causing a synchronous read.
Signed-off-by: NJoe Thornber <ejt@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Remove a visited leaf straight away from the stack, rather than
marking all it's children as visited and letting it get removed on the
next iteration.  May also offer a micro optimisation in dm_btree_del.
Signed-off-by: NJoe Thornber <ejt@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Reorder members in the cache structure to eliminate 6 out of 7 holes
(reclaiming 24 bytes).  Also, the 'worker' and 'waker' members no longer
straddle cachelines.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Acked-by: NJoe Thornber <ejt@redhat.com>

Do not blindly override the queue limits (specifically io_min and
io_opt).  Allow traditional stacking of these limits if io_opt is a
factor of the cache's data block size.

Without this patch mkfs.xfs does not recognize the cache device's
provided limits as a useful geometry (e.g. raid) so these hints are
ignored.  This was due to setting io_min to a useless value.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Acked-by: NJoe Thornber <ejt@redhat.com>

Do not blindly override the queue limits (specifically io_min and
io_opt).  Allow traditional stacking of these limits if io_opt is a
factor of the thin-pool's data block size.

Without this patch mkfs.xfs does not recognize the thin device's
provided limits as a useful geometry (e.g. raid) so these hints are
ignored.  This was due to setting io_min to a useless value.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Acked-by: NJoe Thornber <ejt@redhat.com>

Place upper bound on the cache's data block size (1GB).

Inform users that the data block size can't be any arbitrary number,
i.e. its value must be between 32KB and 1GB.  Also, it should be a
multiple of 32KB.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Acked-by: NJoe Thornber <ejt@redhat.com>

dbf2576e ("workqueue: make all workqueues non-reentrant") made
WQ_NON_REENTRANT no-op and the flag is going away.  Remove its usages.

This patch doesn't introduce any behavior changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Acked-by: NJoe Thornber <ejt@redhat.com>

On sparc32, which includes <linux/swap.h> from <asm/pgtable_32.h>:

drivers/md/dm-cache-policy-mq.c:962:13: error: conflicting types for 'remove_mapping'
include/linux/swap.h:285:12: note: previous declaration of 'remove_mapping' was here

As mq_remove_mapping() already exists, and the local remove_mapping() is
used only once, inline it manually to avoid the conflict.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair Kergon <agk@redhat.com>
Acked-by: NJoe Thornber <ejt@redhat.com>

This reverts commit 407a2c2a.

Explanation provided by Benjamin Tissoires:

Commit "HID: hid-logitech-dj, querying_devices was never set" activate
a flag which guarantees that we do not ask the receiver for too many
enumeration. When the flag is set, each following enumeration call is
discarded (the usb request is not forwarded to the receiver). The flag
is then released when the driver receive a pairing information event,
which normally follows the enumeration request.
However, the USB3 bug makes the driver think the enumeration request
has been forwarded to the receiver. However, it is actually not the
case because the USB stack returns -EPIPE. So, when a new unknown
device appears, the workaround consisting in asking for a new
enumeration is not working anymore: this new enumeration is discarded
because of the flag, which is never reset.

A solution could be to trigger a timeout before releasing it, but for
now, let's just revert the patch.
Reported-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com>
Tested-by: NSune Mølgaard <sune@molgaard.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

In adt7470_write_word_data(), which writes two bytes using
i2c_smbus_write_byte_data(), the return codes are incorrectly AND-ed
together when they should be OR-ed together.

The return code of i2c_smbus_write_byte_data() is zero for success.

The upshot is only the first byte was ever written to the hardware.
The 2nd byte was never written out.

I noticed that trying to set the fan speed limits was not working
correctly on my system.  Setting the fan speed limits is the only
code that uses adt7470_write_word_data().  After making the change
the limit settings work and the alarms work also.
Signed-off-by: NCurt Brune <curt@cumulusnetworks.com>
Cc: stable@vger.kernel.org
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

It takes an unsigned value. This happens not to blow up on 64-bit
architectures, but it does on 32-bit, causing
drm_calc_vbltimestamp_from_scanoutpos() to calculate totally bogus
timestamps for vblank events. Which in turn causes e.g. gnome-shell to
hang after a DPMS off cycle with current xf86-video-ati Git.

[airlied: regression introduced in drm: use monotonic time in drm_calc_vbltimestamp_from_scanoutpos]

Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59339
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59836Tested-by: Nshui yangwei <yangweix.shui@intel.com>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The smc ucode is required for dpm (dynamic power
management), but if it's missing just skip dpm setup
and don't disable acceleration.

Should fix:
https://bugs.freedesktop.org/show_bug.cgi?id=67876Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The rlc is required for dpm to work properly, so if
the rlc ucode is missing, don't enable dpm.  Enabling
dpm without the rlc enabled can result in hangs.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We need proper locking in the driver when accessing instanced
registers on CIK.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We don't pin the BO on allocation, so don't unpin it on free.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Improve error handling in case userspace sends us
an invalid command buffer.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We also need to check the handle.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Otherwise just reinitialize from scratch on resume,
and so make it more likely to succeed.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For r6xx+ asics.  This mirrors the behavior of pre-r6xx
asics.  We need to program the MC even if something
else in startup() fails.  Failure to do so results in
an unusable GPU.

Based on a fix from: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Need to set the wallclock ratio and adjust the phase
and module registers appropriately.  May fix problems
with audio timing at certain display timings.

v2: properly handle clocks below 24mhz
v3: rebase r600 changes
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enabling spread spectrum on the engine clock
leads to hangs on some asics.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=66963Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Removing the clock/power or resetting the VCPU can cause
hangs if that happens in the middle of a register write.

Stall the memory and register bus before putting the VCPU
into reset. Keep it in reset when unloading the module or
suspending.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There are some hardware issue with reclocking on SI when
UVD is active, so use a stable power state when UVD is
active.  Fixes possible hangs and performance issues when
using UVD on SI.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Need to check for engine and memory clock ss separately
and only enable dynamic ss if either of them are found.

This should fix systems which have a ss table, but do
not have entries for engine or memory.  On those systems
we may enable dynamic spread spectrum without enabling
it on the engine or memory clocks which can lead to a
hang in some cases.

fixes some systems reported here:
https://bugs.freedesktop.org/show_bug.cgi?id=66963

v2: fix typo
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

On rv770 and newer, clock gating is not required
for thermal protection.  The only requirement is that
the design utilizes a thermal sensor.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There are two audio dtos on radeon asics that you can
select between.  Normally, dto0 is used for hdmi and
dto1 for DP, but it seems that the dto is somehow
tied to the encoders on DCE3 asics.

fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=67435Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

When we reset the GPU, we need to properly tear
down power management before reseting the GPU and then
set it back up again after reset.  Add the missing
radeon_pm_[suspend|resume] calls to the gpu reset
function.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In theory, under a given ACPI namespace node there should be only
one child device object with _ADR whose value matches a given bus
address exactly.  In practice, however, there are systems in which
multiple child device objects under a given parent have _ADR matching
exactly the same address.  In those cases we use _STA to determine
which of the multiple matching devices is enabled, since some systems
are known to indicate which ACPI device object to associate with the
given physical (usually PCI) device this way.

Unfortunately, as it turns out, there are systems in which many
device objects under the same parent have _ADR matching exactly the
same bus address and none of them has _STA, in which case they all
should be regarded as enabled according to the spec.  Still, if
those device objects are supposed to represent bridges (e.g. this
is the case for device objects corresponding to PCIe ports), we can
try harder and skip the ones that have no child device objects in the
ACPI namespace.  With luck, we can avoid using device objects that we
are not expected to use this way.

Although this only works for bridges whose children also have ACPI
namespace representation, it is sufficient to address graphics
adapter detection issues on some systems, so rework the code finding
a matching device ACPI handle for a given bus address to implement
this idea.

Introduce a new function, acpi_find_child(), taking three arguments:
the ACPI handle of the device's parent, a bus address suitable for
the device's bus type and a bool indicating if the device is a
bridge and make it work as outlined above.  Reimplement the function
currently used for this purpose, acpi_get_child(), as a call to
acpi_find_child() with the last argument set to 'false' and make
the PCI subsystem use acpi_find_child() with the bridge information
passed as the last argument to it.  [Lan Tianyu notices that it is
not sufficient to use pci_is_bridge() for that, because the device's
subordinate pointer hasn't been set yet at this point, so use
hdr_type instead.]

This change fixes a regression introduced inadvertently by commit
33f767d7 (ACPI: Rework acpi_get_child() to be more efficient) which
overlooked the fact that for acpi_walk_namespace() "post-order" means
"after all children have been visited" rather than "on the way back",
so for device objects without children and for namespace walks of
depth 1, as in the acpi_get_child() case, the "post-order" callbacks
ordering is actually the same as the ordering of "pre-order" ones.
Since that commit changed the namespace walk in acpi_get_child() to
terminate after finding the first matching object instead of going
through all of them and returning the last one, it effectively
changed the result returned by that function in some rare cases and
that led to problems (the switch from a "pre-order" to a "post-order"
callback was supposed to prevent that from happening, but it was
ineffective).

As it turns out, the systems where the change made by commit
33f767d7 actually matters are those where there are multiple ACPI
device objects representing the same PCIe port (which effectively
is a bridge).  Moreover, only one of them, and the one we are
expected to use, has child device objects in the ACPI namespace,
so the regression can be addressed as described above.

References: https://bugzilla.kernel.org/show_bug.cgi?id=60561Reported-by: NPeter Wu <lekensteyn@gmail.com>
Tested-by: NVladimir Lalov <mail@vlalov.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: 3.9+ <stable@vger.kernel.org> # 3.9+

This sysfs file was called ignore_nice_load earlier and commit
4d5dcc42 (cpufreq: governor: Implement per policy instances of
governors) changed its name to ignore_nice by mistake.

Lets get it renamed back to its original name.
Reported-by: NMartin von Gagern <Martin.vGagern@gmx.net>
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Commit 42913c79 (MIPS: Loongson2: Use clk API instead of direct
dereferences) broke the cpufreq functionality on Loongson2 boards:
clk_set_rate() is called before the CPU frequency table is
initialized, and therefore will always fail.

Fix by moving the clk_set_rate() after the table initialization.
Tested on Lemote FuLoong mini-PC.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Cc: 3.9+ <stable@vger.kernel.org> # 3.9+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

try_offline_node() checks that all CPUs associated with the given
node have been removed by using cpu_present_bits.  If all cpus
related to that node have been removed, try_offline_node() clears
the node information.

However, try_offline_node() called from acpi_processor_remove() never
clears the node information.  For disabling cpu_present_bits,
acpi_unmap_lsapic() needs be called.  Yet, acpi_unmap_lsapic() is
called after try_offline_node() has run.  So when try_offline_node()
runs, the CPU's cpu_present_bits is always set.

Fix the issue by moving try_offline_node() after acpi_unmap_lsapic().

The problem fixed here was uncovered by commit cecdb193 "ACPI / scan:
Change the implementation of acpi_bus_trim()".

[rjw: Changelog]
Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: NToshi Kani <toshi.kani@hp.com>
Cc: 3.9+ <stable@vger.kernel.org> # 3.9+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

On muxed systems, the other vgaswitcheroo client may depend on i915 to
handle the backlight. We began switching off the backlight since

commit a261b246
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jul 26 19:21:47 2012 +0200

    drm/i915: disable all crtcs at suspend time

breaking backlight on discreet graphics in (some) muxed systems.

Keep the backlight on when the state is changed through vgaswitcheroo.

Note: The alternative would be to add a quirk table to achieve the same
based on system identifiers, but AFAICS it would asymptotically approach
effectively the same as this patch as more IDs are added, but with the
maintenance burden of the quirk table.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=55311Tested-by: NFede <fedevx@yahoo.com>
Tested-by: NAximab <laurent.debian@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59785Tested-by: Nsfievet <sebastien.fievet@free.fr>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The SDVO code tries to compare the encoder's and crtc's idea of the
pixel_multiplier. Normally they have to match, but when transitioning
to DPMS off, we turn off the pipe before reading out the pipe_config,
so the pixel_multiplier in the pipe_config will be 0, whereas the
encoder will still have its pixel_multiplier set to whatever value we
were using when the display was active. This leads to a warning
from intel_modeset_check_state().

WARNING: CPU: 1 PID: 2846 at drivers/gpu/drm/i915/intel_sdvo.c:1378 intel_sdvo_get_config+0x158/0x160()
SDVO pixel multiplier mismatch, port: 0, encoder: 1
Modules linked in: snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep
CPU: 1 PID: 2846 Comm: Xorg Not tainted 3.11.0-rc3-00208-gbe1e8d7-dirty #19
Hardware name: Apple Computer, Inc. Macmini1,1/Mac-F4208EC8, BIOS  MM11.88Z.0055.B03.0604071521 04/07/06
 00000000 00000000 ef0afa54 c1597bbb c1737ea4 ef0afa84 c10392ca c1737e6c
 ef0afab0 00000b1e c1737ea4 00000562 c12dfbe8 c12dfbe8 ef0afb14 00000000
 f697ec00 ef0afa9c c103936e 00000009 ef0afa94 c1737e6c ef0afab0 ef0afadc
Call Trace:
 [<c1597bbb>] dump_stack+0x41/0x56
 [<c10392ca>] warn_slowpath_common+0x7a/0xa0
 [<c103936e>] warn_slowpath_fmt+0x2e/0x30
 [<c12dfbe8>] intel_sdvo_get_config+0x158/0x160
 [<c12c3220>] check_crtc_state+0x1e0/0xb10
 [<c12cdc7d>] intel_modeset_check_state+0x29d/0x7c0
 [<c12dfe5c>] intel_sdvo_dpms+0x5c/0xa0
 [<c12985de>] drm_mode_obj_set_property_ioctl+0x40e/0x420
 [<c1298625>] drm_mode_connector_property_set_ioctl+0x35/0x40
 [<c1289294>] drm_ioctl+0x3e4/0x540
 [<c10fc1a2>] do_vfs_ioctl+0x72/0x570
 [<c10fc72f>] SyS_ioctl+0x8f/0xa0
 [<c159b7fa>] sysenter_do_call+0x12/0x22
---[ end trace 7ce940aff1366d60 ]---

Fix the problem by skipping the encoder get_config() function for
inactive encoders.
Tested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>