DSA drivers and core use switchdev. Include switchdev.h only once, in
the dsa.h public header, so that inclusion in DSA drivers or forward
declarations of switchdev structures in not necessary anymore.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds support for hdlc-bus mode to the fsl_ucc_hdlc driver. This can
be enabled with the "fsl,hdlc-bus" property in the DTS node of the
corresponding ucc.

This aligns the configuration of the UPSMR and GUMR registers to what is
done in our ucc_hdlc driver (that only support hdlc-bus mode) and with
the QuickEngine's documentation for hdlc-bus mode.

GUMR/SYNL is set to AUTO for the busmode as in this case the CD signal
is ignored. The brkpt_support is enabled to set the HBM1 bit in the
CMXUCR register to configure an open-drain connected HDLC bus.
Signed-off-by: NHolger Brunck <holger.brunck@keymile.com>
Cc: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We can't assume that we are always in loopback mode if rx and tx clock
have the same clock source. If we want to use HDLC busmode we also have
the same clock source but we are not in loopback mode. So move the
setting of the baudrate generator after the check for property for the
loopback mode.
Signed-off-by: NHolger Brunck <holger.brunck@keymile.com>
Cc: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need space for the struct qe_bd and not for a pointer to this struct.
Signed-off-by: NHolger Brunck <holger.brunck@keymile.com>
Cc: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHolger Brunck <holger.brunck@keymile.com>
Cc: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes the following compiler warnings:
drivers/net/wan/fsl_ucc_hdlc.c: In function 'ucc_hdlc_poll':
warning: 'skb' may be used uninitialized in this function
[-Wmaybe-uninitialized]
  skb->mac_header = skb->data - skb->head;

and

drivers/net/wan/fsl_ucc_hdlc.c: In function 'ucc_hdlc_probe':
drivers/net/wan/fsl_ucc_hdlc.c:1127:3: warning: 'utdm' may be used
uninitialized in this function [-Wmaybe-uninitialized]
   kfree(utdm);
Signed-off-by: NHolger Brunck <holger.brunck@keymile.com>
Cc: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some of the tracing seems to be remaining traces for basic driver
development. They can be removed now, as they cause noisy printouts.
Signed-off-by: NHolger Brunck <holger.brunck@keymile.com>
Cc: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

4 billion packet queue is something unthinkable so use 32-bit value
for now.

Space savings on x86_64:

	add/remove: 0/0 grow/shrink: 3/70 up/down: 16/-131 (-115)
	function                                     old     new   delta
	change_tx_queue_len                           94     108     +14
	qdisc_create                                1176    1177      +1
	alloc_netdev_mqs                            1124    1125      +1
	xenvif_alloc                                 533     532      -1
	x25_asy_setup                                167     166      -1
			...
	tun_queue_resize                             945     940      -5
	pfifo_fast_enqueue                           167     162      -5
	qfq_init_qdisc                               168     158     -10
	tap_queue_resize                             810     799     -11
	transmit                                     719     698     -21
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We used to dequeue one skb during recvmsg() from skb_array, this could
be inefficient because of the bad cache utilization and spinlock
touching for each packet. This patch tries to batch them by calling
batch dequeuing helpers explicitly on the exported skb array and pass
the skb back through msg_control for underlayer socket to finish the
userspace copying. Batch dequeuing is also the requirement for more
batching improvement on receive path.

Tests were done by pktgen on tap with XDP1 in guest. Host is Intel(R)
Xeon(R) CPU E5-2650 0 @ 2.00GHz.

rx batch | pps

0   2.25Mpps
1   2.33Mpps (+3.56%)
4   2.33Mpps (+3.56%)
16  2.35Mpps (+4.44%)
64  2.42Mpps (+7.56%) <- Default rx batching
128 2.40Mpps (+6.67%)
256 2.38Mpps (+5.78%)
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch makes tap_recvmsg() can receive from skb from its caller
through msg_control. Vhost_net will be the first user.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch makes tun_recvmsg() can receive from skb from its caller
through msg_control. Vhost_net will be the first user.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch exports skb_array through tap_get_skb_array(). Caller can
then manipulate skb array directly.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch exports skb_array through tun_get_skb_array(). Caller can
then manipulate skb array directly.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fold lines longer than 80 characters
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Makes the code a bit more readable, and solves quite a few checkpatch
warnings of lines longer than 80 characters.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Break big functions up by using a number of smaller helper
function. Solves some of the over 80 lines warnings, by reducing the
indentation level.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Avoid multiple assignments
Comparisons should place the constant on the right side of the test
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove the extra blank lines, add one in where recommended.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use net style comment blocks, and wrap one block with long lines.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With more drivers being added, it is time to sort the drivers to
impose some order.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the function assigned to .ndo_set_vf_mac, check the validity of the
vfidx argument before proceeding to tell the firmware to set the VF MAC
address.
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDerek Chickles <derek.chickles@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When multiple liquidio NICs are plugged in, the first insmod of the PF
driver succeeds.  But after an rmmod, a subsequent insmod fails.  Reason is
during rmmod, the PF driver resets the Octeon of only one of the NICs; it
neglects to reset the Octeons of the other NICs.

Fix the insmod failure by adding the missing Octeon resets at rmmod.  Keep
a per-NIC refcount that indicates the number of active PFs in a given NIC.
When the refcount goes to zero, then reset the Octeon of that NIC.
Signed-off-by: NRick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A dsa_switch_tree instance holds a dsa_switch pointer and a port index
to identify the switch port to which the CPU is attached.

Now that the DSA layer has a dsa_port structure to hold this data, use
it to point the switch CPU port.

This patch simply substitutes s/dst->cpu_switch/dst->cpu_dp->ds/ and
s/dst->cpu_port/dst->cpu_dp->index/.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In virtual mode, packets are classified to FIDs based on their ingress
port and VLAN whereas in non-virtual mode only the VLAN is taken into
account.

Currently ports are initialized to use virtual mode due to the presence
of the PVID vPort. However, we're going to transition ports between both
modes based on the FIDs they use and not merely based on the presence on
a VLAN upper. Therefore, during initialization, no mode will be
explicitly set.

Since the Programmer's Reference Manual (PRM) doesn't specify a default,
explicitly set the port to non-virtual mode and later transition the
port between both modes based on the FIDs it uses.

In a follow-up patchset, this step will be moved to the common FID core
where it logically belongs.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

PVID is a port attribute and should therefore reside in the main driver
file and not the switchdev specific one.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We no longer batch VLAN operations, so there's no need to set the
learning state for a range of VLANs.

Use a common function to set the learning state for a Port-VLAN, thereby
making the code saner more receptive for upcoming changes.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Simplify the code by using the common function that sets an STP state
for a Port-VLAN and remove the existing one that tries to batch it for
several VLANs.

This will help us in a follow-up patchset to introduce a unified
infrastructure for bridge ports, regardless if the bridge is VLAN-aware
or not.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

switchdev's VLAN object has the ability to describe a range of VLAN IDs,
but this is only used when VLAN operations are done using the SELF flag,
which is something we would like to remove as it allows one to bypass
the bridge driver.

Do VLAN operations on a per-VLAN basis, thereby simplifying the code and
preparing it for refactoring in a follow-up patchset.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since commit 97c24290 ("switchdev: Execute bridge ndos only for
bridge ports") switchdev code checks that port is bridged, so no need to
perform the same check in the driver.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The router interfaces (RIFs) array is currently initialized together
with the general router configuration. However, in a follow-up patchset
we're going to introduce a common RIF core that will require us to
initialize more RIF constructs, so move the RIF initialization to its
own function.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The FIB notification block logically belongs inside the router specific
struct, so move it there.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The router interfaces (RIFs) array is of no interest to code outside the
routing realm, so declare it inside the router specific struct instead
of the chip-wide one.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some attributes in the global chip struct are only relevant for bridge
operation, so encapsulate them in their own struct that isn't exposed to
non-bridge code.

This will also help us later, when we add more bridge-specific
attributes.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In a similar fashion to previous patch, the router structure
('mlxsw_sp_router') doesn't need to be accessible to anyone, but the
router code located at spectrum_router.c

Make this apparent and reduce its scope by defining it there.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The shared buffer structure ('mlxsw_sp_sb') doesn't need to be
accessible to anyone, but the shared buffer code located at
spectrum_buffers.c

Make this apparent and reduce its scope by defining it there.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When is_kdump_kernel() is true, reduce memory footprint of
cxgb4 by using a single "Queue Set".
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit fa8cddaf ("net phylib: Remove unnecessary condition check in phy")
removed the only place where the PHY flag PHY_HAS_MAGICANEG was
checked. But it left the flag being set in the drivers. Remove the flag.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is inline function to test if carrier present,
so it makes open-coded solution redundant.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Acked-by: NYuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>