- 23 1月, 2013 2 次提交
-
-
由 Chris Wilson 提交于
On SNB, if bit 13 of GFX_MODE, Flush TLB Invalidate Mode, is not set to 1, the hardware can not program the scanline values. Those scanline values then control when the signal is sent from the display engine to the render ring for MI_WAIT_FOR_EVENTs. Note setting this bit means that TLB invalidations must be performed explicitly through the appropriate bits being set in PIPE_CONTROL. References: https://bugzilla.kernel.org/show_bug.cgi?id=52311Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Reviewed-by: NBen Widawsky <ben@bwidawsk.net> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Chris Wilson 提交于
This is a required workarounds for all products, especially on gen6+ where it causes the command streamer to fail to parse instructions following a WAIT_FOR_EVENT. We use WAIT_FOR_EVENT for synchronising between the GPU and the display engines, and so this bit being unset may cause hangs. References: https://bugzilla.kernel.org/show_bug.cgi?id=52311Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Reviewed-by: NImre Deak <imre.deak@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 21 1月, 2013 4 次提交
-
-
由 Dave Airlie 提交于
if we have a move notify callback, when moving fails, we call move notify the opposite way around, however this ends up with *mem containing the mm_node from the bo, which means we double free it. This is a follow on to the previous fix. Reviewed-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
When we are using memcpy to move objects around, and we fail to memcpy due to lack of memory to populate or failure to finish the copy, we don't want to destroy the mm_node that has been copied into old_copy. While working on a new kms driver that uses memcpy, if I overallocated bo's up to the memory limits, and eviction failed, then machine would oops soon after due to having an active bo with an already freed drm_mm embedded in it, freeing it a second time didn't end well. Reviewed-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://people.freedesktop.org/~danvet/drm-intel由 Dave Airlie 提交于
More important fixes for 3.9: - error_state improvements to help debug the new scanline wait code added for gen6+ - bug reports started popping up :( patch from Chris Wilson. - fix a panel power sequence confusion between the eDP and lvds detection code resulting in black screens - regression introduce in 3.8 (Jani Nikula) - Chris fixed the root-cause of the ilk relocation vs. evict bug. - Another piece of cargo-culted rc6 lore from Jani, fixes up a regression where a system refused to go into rc6 after suspend sometimes. * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: fix FORCEWAKE posting reads drm/i915: Invalidate the relocation presumed_offsets along the slow path drm/i915/eDP: do not write power sequence registers for ghost eDP drm/i915: Record DERRMR, FORCEWAKE and RING_CTL in error-state
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
A number of fixes, and one revert for a patch having some wierd side effects. * 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linux: Revert "drm/radeon: do not move bo to different placement at each cs" drm/radeon: improve semaphore debugging on lockup drm/radeon: allow FP16 color clear registers on r500 drm/radeon: clear reset flags if engines are idle
-
- 18 1月, 2013 1 次提交
-
-
由 Alex Deucher 提交于
This reverts commit d025e9e2. This causes corruption for a number of users and needs further investigation in the next cycle. https://bugzilla.kernel.org/show_bug.cgi?id=52491 https://bugs.freedesktop.org/show_bug.cgi?id=58659 http://lists.freedesktop.org/archives/dri-devel/2013-January/032961.htmlSigned-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 17 1月, 2013 1 次提交
-
-
由 Jani Nikula 提交于
We stopped reading FORCEWAKE for posting reads in commit 8dee3eea Author: Ben Widawsky <ben@bwidawsk.net> Date: Sat Sep 1 22:59:50 2012 -0700 drm/i915: Never read FORCEWAKE and started using something from the same cacheline instead. On the bug reporter's machine this broke entering rc6 states after a suspend/resume cycle. It turns out reading ECOBUS as posting read worked fine, while GTFIFODBG did not, preventing RC6 states after suspend/resume per the bug report referenced below. It's not entirely clear why, but clearly GTFIFODBG was nowhere near the same cacheline or address range as FORCEWAKE. Trying out various registers for posting reads showed that all tested registers for which NEEDS_FORCE_WAKE() (in i915_drv.c) returns true work. Conversely, most (but not quite all) registers for which NEEDS_FORCE_WAKE() returns false do not work. Details in the referenced bug. Based on the above, add posting reads on ECOBUS where GTFIFODBG was previously relied on. In true cargo cult spirit, add posting reads for FORCEWAKE_VLV writes as well, but instead of ECOBUS, use FORCEWAKE_ACK_VLV which is in the same address range as FORCEWAKE_VLV. v2: Add more details to the commit message. No functional changes. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52411Reported-and-tested-by: NAlexander Bersenev <bay@hackerdom.ru> CC: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org [danvet: add cc: stable and make the commit message a bit clearer that this is a regression fix and what exactly broke.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 16 1月, 2013 2 次提交
-
-
由 Chris Wilson 提交于
In the slow path, we are forced to copy the relocations prior to acquiring the struct mutex in order to handle pagefaults. We forgo copying the new offsets back into the relocation entries in order to prevent a recursive locking bug should we trigger a pagefault whilst holding the mutex for the reservations of the execbuffer. Therefore, we need to reset the presumed_offsets just in case the objects are rebound back into their old locations after relocating for this exexbuffer - if that were to happen we would assume the relocations were valid and leave the actual pointers to the kernels dangling, instant hang. Fixes regression from commit bcf50e27 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Sun Nov 21 22:07:12 2010 +0000 drm/i915: Handle pagefaults in execbuffer user relocations Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55984Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@fwll.ch> Cc: stable@vger.kernel.org Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Jani Nikula 提交于
Some machines detect an eDP port even if it's not really there, and eDP initialization has a fail path for this. Typically such machines have an LVDS display instead. A regression introduced in commit 82ed61fa Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Oct 20 20:57:41 2012 +0200 drm/i915: make edp panel power sequence setup more robust updated the power sequence registers PCH_PP_ON_DELAYS, PCH_PP_OFF_DELAYS, and PCH_PP_DIVISOR also in the ghost eDP case, messing up the LVDS display. Split the power sequencer initialization into two, delaying the register updates until after we know the eDP is real. Note: Keep the PP_CONTROL unlocking in the first part, even if it does not update registers, per the commit message of the above mentioned commit. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52601Reported-and-tested-by: NRyan Coe <ryan@rycomotorsports.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 15 1月, 2013 4 次提交
-
-
由 Jerome Glisse 提交于
Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Marek Olšák 提交于
Probably not a candidate for stable kernels because of conflicts in DRM versioning. Signed-off-by: NMarek Olšák <maraeo@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Fixes a hard lock in the gpu reset code after the rework for DMA support (0ecebb9e "drm/radeon: switch to a finer grained reset for evergreen") due to not bailing before the MC shutdown if the relevant engines are idle. Discussion: http://lists.freedesktop.org/archives/dri-devel/2013-January/032985.htmlReported-by: NEldad Zack <eldad@fogrefinery.com> Tested-by: NEldad Zack <eldad@fogrefinery.com> Acked-by: NPaul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Chris Wilson 提交于
These are useful for investigating hangs involving WAIT_FOR_EVENT. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> [danvet: Apply a droplet of Future-Proof in the if-ladder.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 14 1月, 2013 5 次提交
-
-
由 Hans de Goede 提交于
This is a left-over from when udl_get_edid returned the amount of bytes successfully read, which it no longer does. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Hans de Goede 提交于
The buffer passed to usb_control_msg may end up in scatter-gather list, and may thus not be on the stack. Having it on the stack usually works on x86, but not on other archs. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Hans de Goede 提交于
udldrmfb only reads the main EDID block, and if that advertises extensions the drm_edid code expects them to be present, and starts reading beyond the buffer udldrmfb passes it. Although it may be possible to read more EDID info with the udl we simpy don't know how, and even if trial and error gets it working on one device, that is no guarantee it will work on other revisions. So this patch does a simple fix in the form of patching the EDID info to report 0 extension blocks, this fixes udldrmfb only doing 1024x768 on monitors with EDID extension blocks. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
Fixes for UMS mode which has been broken for a while plus an rn50 fix and a dma fix. * 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linux: radeon/kms: fix dma relocation checking radeon/kms: force rn50 chip to always report connected on analog output drm/radeon: fix error path in kpage allocation drm/radeon: fix a bogus kfree drm/radeon: fix NULL pointer dereference in UMS mode
-
由 Dave Airlie 提交于
Merge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next Regression fixes since rework mostly. * 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nvc0/fb: fix crash when different mutex is used to protect same list drm/nouveau/clock: fix support for more than 2 monitors on nve0 drm/nv50/disp: fix selection of bios script for analog outputs drm/nv17-50: restore fence buffer on resume drm/nouveau: fix blank LVDS screen regression on pre-nv50 cards drm/nouveau: fix nouveau_client allocation failure path drm/nouveau: don't return freed object from nouveau_handle_create drm/nouveau/vm: fix memory corruption when pgt allocation fails drm/nouveau: add locking around instobj list operations drm/nouveau: do not forcibly power on lvds panels drm/nouveau/devinit: ensure legacy vga control is enabled during post
-
- 13 1月, 2013 11 次提交
-
-
由 Aleksi Torhamo 提交于
Fixes regression introduced in commit 861d2107 "drm/nouveau/fb: merge fb/vram and port to subdev interfaces" nv50_fb_vram_{new,del} functions were changed to use nouveau_subdev->mutex instead of the old nouveau_mm->mutex. nvc0_fb_vram_new still uses the nouveau_mm->mutex, but nvc0 doesn't have its own fb_vram_del function, using nv50_fb_vram_del instead. Because of this, on nvc0 a different mutex ends up being used to protect additions and deletions to the same list. This patch is a -stable candidate for 3.7. Signed-off-by: NAleksi Torhamo <aleksi@torhamo.net> Reported-by: NRoy Spliet <r.spliet@student.tudelft.nl> Tested-by: NRoy Spliet <r.spliet@student.tudelft.nl> Signed-off-by: NBen Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
-
由 Aleksi Torhamo 提交于
Fixes regression introduced in commit 70790f4f "drm/nouveau/clock: pull in the implementation from all over the place" When code was moved from nv50_crtc_set_clock to nvc0_clock_pll_set, the PLLs it is used for got limited to only the first two VPLLs. nv50_crtc_set_clock was only called to change VPLLs, so it didn't limit what it was used for in any way. Since nvc0_clock_pll_set is used for all PLLs, it has to specify which PLLs the code is used for, and only listed the first two VPLLs. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=58735 This patch is a -stable candidate for 3.7. Signed-off-by: NAleksi Torhamo <aleksi@torhamo.net> Tested-by: NAleksi Torhamo <aleksi@torhamo.net> Tested-by: NSean Santos <quantheory@gmail.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
-
由 Marcin Slusarz 提交于
Analog output number was overwritten by value from digital output path. Fix it. Fixes resume from s2ram: https://bugs.freedesktop.org/show_bug.cgi?id=58729 (as stumbled on by J Binder, Pontus Fuchs and me) Fixes blank screen on module load (reported by Sune Mølgaard). Fixes regression from commit 186ecad2 ("drm/nv50/disp: move remaining interrupt handling into core"). Reported-by: NJ Binder <wheel@herr-der-mails.de> Reported-by: NPontus Fuchs <pontus.fuchs@gmail.com> Reported-by: NSune Mølgaard <sune@molgaard.org> Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Tested-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Tested-by: NSune Mølgaard <sune@molgaard.org> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Marcin Slusarz 提交于
Since commit 5e120f6e "drm/nouveau/fence: convert to exec engine, and improve channel sync" nouveau fence sync implementation for nv17-50 and nvc0+ started to rely on state of fence buffer left by previous sync operation. But as pinned bo's (where fence state is stored) are not saved+restored across suspend/resume, we need to do it manually. nvc0+ was fixed by commit d6ba6d21 "drm/nvc0/fence: restore pre-suspend fence buffer context on resume". Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=50121Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
-
由 Marcin Slusarz 提交于
Commit 2a44e499 ("drm/nouveau/disp: introduce proper init/fini, separate from create/destroy") started to call display init routines on pre-nv50 hardware on module load. But LVDS init code sets driver state in a way which prevents modesetting code from operating properly. nv04_display_init calls nv04_dfp_restore, which sets encoder->last_dpms to NV_DPMS_CLEARED. drm_crtc_helper_set_mode nv04_dfp_prepare nv04_lvds_dpms(DRM_MODE_DPMS_OFF) nv04_lvds_dpms checks last_dpms mode (which is NV_DPMS_CLEARED) and wrongly assumes it's a "powersaving mode", the new one (DRM_MODE_DPMS_OFF) is too, so it skips calling some crucial lvds scripts. Reported-by: NChris Paulson-Ellis <chris@edesix.com> Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
-
由 Marcin Slusarz 提交于
Depending on the point of failure, freed object would be returned or memory leak would happen. Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Marcin Slusarz 提交于
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Marcin Slusarz 提交于
If we return freed vm, nouveau_drm_open will happily call nouveau_cli_destroy, which will try to free it again. Reported-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Marcin Slusarz 提交于
Fixes memory corruptions, oopses, etc. when multiple gpuobjs are simultaneously created or destroyed. Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
-
由 Ben Skeggs 提交于
This fix was put in place to fix a bug where the eDP panel on certain laptops fails to respond over the aux channel after suspend. It appears that on some systems (Dell M6600, with LVDS panel) there's a very bad interaction with the eDP init table that causes the SOR to get very confused and not drive the panel correctly, leading to bleed. A DPMS off/on cycle is enough to bring it back, but, this will avoid the problem by not touching the panel GPIOs at times we're not meant to. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Fixes ACPI backlight control after suspend on some systems. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 11 1月, 2013 10 次提交
-
-
由 Jerome Glisse 提交于
We were checking the index against the size of the relocation buffer instead of against the last index. This fix kernel segfault when userspace submit ill formated command stream/relocation buffer pair. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jerome Glisse 提交于
Those rn50 chip are often connected to console remoting hw and load detection often fails with those. Just don't try to load detect and report connect. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Ilija Hadzic 提交于
Index into chunks[] array doesn't look right. Signed-off-by: NIlija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Ilija Hadzic 提交于
parser->chunks[.].kpage[.] is not always kmalloc-ed by the parser initialization, so parser_fini should not try to kfree it if it didn't allocate it. This patch fixes a kernel oops that can be provoked in UMS mode. Signed-off-by: NIlija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Ilija Hadzic 提交于
In UMS mode parser->rdev is NULL, so dereferencing will cause an oops. Signed-off-by: NIlija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
git://people.freedesktop.org/~danvet/drm-intel由 Dave Airlie 提交于
Daniel writes: "Pretty much all just major fixes: - 2 pieces of duct-tape for the ilk bug. - Sprite regression fixes from Chris. - OOPS fix for a div-by-zero from Chris, regression due to the modeset rework in 3.7, now brought to light by a benign change in 3.8. - Fix interrupted bo pinning, used to work around CS coherency issues on i830/i845 (kernel also has a w/a newly in 3.8, but pinning is more efficient if possible)."
-
git://cavan.codon.org.uk/platform-drivers-x86由 Linus Torvalds 提交于
Pull x86 platform driver bugfixes from Matthew Garrett. * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: asus-laptop: Fix potential invalid pointer dereference Update MAINTAINERS entry asus-laptop: Do not call HWRS on init sony-laptop: fix SNC buffer calls when SN06 returns Integers samsung-laptop: Add quirk for broken acpi_video backlight on N250P acer-wmi: add Aspire 5741G touchpad toggle key acer-wmi: change to emit touchpad on off key acer-wmi: fix obj is NULL but dereferenced MAINTAINERS: change the mail address of acer-wmi/msi-laptop maintainer
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM bugfixes from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: use dynamic percpu allocations for shared msrs area KVM: PPC: Book3S HV: Fix compilation without CONFIG_PPC_POWERNV powerpc: Corrected include header path in kvm_para.h Add rcu user eqs exception hooks for async page fault
-
由 Linus Torvalds 提交于
Merge tag 'trace-3.8-rc2-regression-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing regression fix from Steven Rostedt: "A change that came in this merge window broke the writing to the trace_options file. It causes garbage to be read during the compare of option names, and breaks setting options via the trace_options file, although options can still be set via the options/<option> files." * tag 'trace-3.8-rc2-regression-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix regression of trace_options file setting
-
由 Daniel Vetter 提交于
This partially reverts commit 6c085a72 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon Aug 20 11:40:46 2012 +0200 drm/i915: Track unbound pages Closer inspection of that patch revealed a bunch of unrelated changes in the shrinker: - The shrinker count is now in pages instead of objects. - For counting the shrinkable objects the old code only looked at the inactive list, the new code looks at all bounds objects (including pinned ones). That is obviously in addition to the new unbound list. - The shrinker cound is no longer scaled with sysctl_vfs_cache_pressure. Note though that with the default tuning value of vfs_cache_pressue = 100 this doesn't affect the shrinker behaviour. - When actually shrinking objects, the old code first dropped purgeable objects, then normal (inactive) objects. Only then did it, in a last-ditch effort idle the gpu and evict everything. The new code omits the intermediate step of evicting normal inactive objects. Safe for the first change, which seems benign, and the shrinker count scaling, which is a bit a different story, the endresult of all these changes is that the shrinker is _much_ more likely to fall back to the last-ditch resort of idling the gpu and evicting everything. The old code could only do that if something else evicted lots of objects meanwhile (since without any other changes the nr_to_scan will be smaller than the object count). Reverting the vfs_cache_pressure behaviour itself is a bit bogus: Only dentry/inode object caches should scale their shrinker counts with vfs_cache_pressure. Originally I've had that change reverted, too. But Chris Wilson insisted that it's too bogus and shouldn't again see the light of day. Hence revert all these other changes and restore the old shrinker behaviour, with the minor adjustment that we now first scan the unbound list, then the inactive list for each object category (purgeable or normal). A similar patch has been tested by a few people affected by the gen4/5 hangs which started to appear in 3.7, which some people bisected to the "drm/i915: Track unbound pages" commit. But just disabling the unbound logic alone didn't change things at all. Note that this patch doesn't fix the referenced bugs, it only hides the underlying bug(s) well enough to restore pre-3.7 behaviour. The key to achieve that is to massively reduce the likelyhood of going into a full gpu stall and evicting everything. v2: Reword commit message a bit, taking Chris Wilson's comment into account. v3: On Chris Wilson's insistency, do not reinstate the rather bogus vfs_cache_pressure change. Tested-by: NGreg KH <gregkh@linuxfoundation.org> Tested-by: NDave Kleikamp <dave.kleikamp@oracle.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=55984 References: https://bugs.freedesktop.org/show_bug.cgi?id=57122 References: https://bugs.freedesktop.org/show_bug.cgi?id=56916 References: https://bugs.freedesktop.org/show_bug.cgi?id=57136 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Acked-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-