When memory failure is enabled, a poisoned hugepage pte is marked as a
swap entry. huge_pte_offset() does not return the poisoned page table
entries when it encounters PUD/PMD hugepages.

This behaviour of huge_pte_offset() leads to error such as below when
munmap is called on poisoned hugepages.

[  344.165544] mm/pgtable-generic.c:33: bad pmd 000000083af00074.

Fix huge_pte_offset() to return the poisoned pte which is then
appropriately handled by the generic layer code.
Signed-off-by: NPunit Agrawal <punit.agrawal@arm.com>
Acked-by: NSteve Capper <steve.capper@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Cc: David Woods <dwoods@mellanox.com>
Tested-by: NManoj Iyer <manoj.iyer@canonical.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

When CONFIG_MODULES is disabled, we cannot dereference a module pointer:

arch/arm64/kernel/ftrace.c: In function 'ftrace_make_call':
arch/arm64/kernel/ftrace.c:107:36: error: dereferencing pointer to incomplete type 'struct module'
   trampoline = (unsigned long *)mod->arch.ftrace_trampoline;

Also, the within_module() function is not defined:

arch/arm64/kernel/ftrace.c: In function 'ftrace_make_nop':
arch/arm64/kernel/ftrace.c:171:8: error: implicit declaration of function 'within_module'; did you mean 'init_module'? [-Werror=implicit-function-declaration]

This addresses both by adding replacing the IS_ENABLED(CONFIG_ARM64_MODULE_PLTS)
checks with #ifdef versions.

Fixes: e71a4e1b ("arm64: ftrace: add support for far branches to dynamic ftrace")
Reported-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Whilst debugging a remote crash, I noticed that show_pte is unhelpful
when it comes to describing the structure of the page table being walked.
This is easily fixed by printing out the page table (swapper vs user),
page size and virtual address size when displaying the PGD address.
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Print out the name of the file associated with the vma that faulted.
This is usually the executable or shared library name. We already print
out the task name, but also printing the library name is useful for
pinpointing bugs to libraries.

Also print the base address and size of the vma, which together with the
PC (printed by __show_regs) gives the offset into the library.

Fault prints now look like:
test[2361]: unhandled level 2 translation fault (11) at 0x00000012, esr 0x92000006, in libfoo.so[ffffa0145000+1000]

This is already done on x86, for more details see commit 03252919
("x86: print which shared library/executable faulted in segfault etc.
messages v3").
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NKristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

When we take a fault from EL0 that can't be handled, we print out the
page table entries associated with the faulting address. This allows
userspace to print out any current page table entries, including kernel
(TTBR1) entries. Exposing kernel mappings like this could pose a
security risk, so don't print out page table information on EL0 faults.
(But still print it out for EL1 faults.) This also follows the same
behaviour as x86, printing out page table entries on kernel mode faults
but not user mode faults.
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NKristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

When we take a fault that can't be handled, we print out the page table
entries associated with the faulting address. In some cases we currently
print out the wrong entries. For a faulting TTBR1 address, we sometimes
print out TTBR0 table entries instead, and for a faulting TTBR0 address
we sometimes print out TTBR1 table entries. Fix this by choosing the
tables based on the faulting address.
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NKristina Martsenko <kristina.martsenko@arm.com>
[will: zero-extend addrs to 64-bit, don't walk swapper w/ TTBR0 addr]
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Currently, dynamic ftrace support in the arm64 kernel assumes that all
core kernel code is within range of ordinary branch instructions that
occur in module code, which is usually the case, but is no longer
guaranteed now that we have support for module PLTs and address space
randomization.

Since on arm64, all patching of branch instructions involves function
calls to the same entry point [ftrace_caller()], we can emit the modules
with a trampoline that has unlimited range, and patch both the trampoline
itself and the branch instruction to redirect the call via the trampoline.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
[will: minor clarification to smp_wmb() comment]
Signed-off-by: NWill Deacon <will.deacon@arm.com>

When turning branch instructions into NOPs, we attempt to validate the
action by comparing the old value at the call site with the opcode of
a direct relative branch instruction pointing at the old target.

However, these call sites are statically initialized to call _mcount(),
and may be redirected via a PLT entry if the module is loaded far away
from the kernel text, leading to false negatives and spurious errors.

So skip the validation if CONFIG_ARM64_MODULE_PLTS is configured.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Adjust vdso_{start|end} to be char arrays to avoid compile-time analysis
that flags "too large" memcmp() calls with CONFIG_FORTIFY_SOURCE.

Cc: Jisheng Zhang <jszhang@marvell.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Suggested-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Commit 3fde2999 ("arm64: cpufeature: Don't dump useless backtrace on
CPU_OUT_OF_SPEC") changed the cpufeature detection code to use add_taint
instead of WARN_TAINT_ONCE when detecting a heterogeneous system with
mismatched feature support. Unfortunately, this resulted in all systems
getting the taint, regardless of any feature mismatch.

This patch fixes the problem by conditionalising the taint on detecting
a feature mismatch.
Acked-by: NMark Rutland <mark.rutland@arm.com>
Reported-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

When running lscpu on an AArch64 system that has SMBIOS version 2.0
tables, it will segfault in the following way:

  Unable to handle kernel paging request at virtual address ffff8000bfff0000
  pgd = ffff8000f9615000
  [ffff8000bfff0000] *pgd=0000000000000000
  Internal error: Oops: 96000007 [#1] PREEMPT SMP
  Modules linked in:
  CPU: 0 PID: 1284 Comm: lscpu Not tainted 4.11.0-rc3+ #103
  Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
  task: ffff8000fa78e800 task.stack: ffff8000f9780000
  PC is at __arch_copy_to_user+0x90/0x220
  LR is at read_mem+0xcc/0x140

This is caused by the fact that lspci issues a read() on /dev/mem at the
offset where it expects to find the SMBIOS structure array. However, this
region is classified as EFI_RUNTIME_SERVICE_DATA (as per the UEFI spec),
and so it is omitted from the linear mapping.

So let's restrict /dev/mem read/write access to those areas that are
covered by the linear region.
Reported-by: NAlexander Graf <agraf@suse.de>
Fixes: 4dffbfc4 ("arm64/efi: mark UEFI reserved regions as MEMBLOCK_NOMAP")
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

PCI core requires the NUMA node for the struct pci_host_bridge.dev to
be set by using the pcibus_to_node(struct pci_bus*) API, that on ARM64
systems relies on the struct pci_host_bridge->bus.dev NUMA node.

The struct pci_host_bridge.dev NUMA node is then propagated through
the PCI device hierarchy as PCI devices (and bridges) are enumerated
under it.

Therefore, in order to set-up the PCI NUMA hierarchy appropriately, the
struct pci_host_bridge->bus.dev NUMA node must be set before core
code calls pcibus_to_node(struct pci_bus*) on it so that PCI core can
retrieve the NUMA node for the struct pci_host_bridge.dev device and can
propagate it through the PCI bus tree.

On ARM64 ACPI based systems the struct pci_host_bridge->bus.dev NUMA
node can be set-up in pcibios_root_bridge_prepare() by parsing the root
bridge ACPI device firmware binding.

Add code to the pcibios_root_bridge_prepare() that, when booting with
ACPI, parse the root bridge ACPI device companion NUMA binding and set
the corresponding struct pci_host_bridge->bus.dev NUMA node
appropriately.

Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NRobert Richter <rrichter@cavium.com>
Tested-by: NRobert Richter <rrichter@cavium.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

FUTEX_OP_OPARG_SHIFT instructs the futex code to treat the 12-bit oparg
field as a shift value, potentially leading to a left shift value that
is negative or with an absolute value that is significantly larger then
the size of the type. UBSAN chokes with:

================================================================================
UBSAN: Undefined behaviour in ./arch/arm64/include/asm/futex.h:60:13
shift exponent -1 is negative
CPU: 1 PID: 1449 Comm: syz-executor0 Not tainted 4.11.0-rc4-00005-g977eb52-dirty #11
Hardware name: linux,dummy-virt (DT)
Call trace:
[<ffff200008094778>] dump_backtrace+0x0/0x538 arch/arm64/kernel/traps.c:73
[<ffff200008094cd0>] show_stack+0x20/0x30 arch/arm64/kernel/traps.c:228
[<ffff200008c194a8>] __dump_stack lib/dump_stack.c:16 [inline]
[<ffff200008c194a8>] dump_stack+0x120/0x188 lib/dump_stack.c:52
[<ffff200008cc24b8>] ubsan_epilogue+0x18/0x98 lib/ubsan.c:164
[<ffff200008cc3098>] __ubsan_handle_shift_out_of_bounds+0x250/0x294 lib/ubsan.c:421
[<ffff20000832002c>] futex_atomic_op_inuser arch/arm64/include/asm/futex.h:60 [inline]
[<ffff20000832002c>] futex_wake_op kernel/futex.c:1489 [inline]
[<ffff20000832002c>] do_futex+0x137c/0x1740 kernel/futex.c:3231
[<ffff200008320504>] SYSC_futex kernel/futex.c:3281 [inline]
[<ffff200008320504>] SyS_futex+0x114/0x268 kernel/futex.c:3249
[<ffff200008084770>] el0_svc_naked+0x24/0x28
================================================================================
syz-executor1 uses obsolete (PF_INET,SOCK_PACKET)
sock: process `syz-executor0' is using obsolete setsockopt SO_BSDCOMPAT

This patch attempts to fix some of this by:

  * Making encoded_op an unsigned type, so we can shift it left even if
    the top bit is set.

  * Casting to signed prior to shifting right when extracting oparg
    and cmparg

  * Consider only the bottom 5 bits of oparg when using it as a left-shift
    value.

Whilst I think this catches all of the issues, I'd much prefer to remove
this stuff, as I think it's unused and the bugs are copy-pasted between
a bunch of architectures.
Reviewed-by: NRobin Murphy <robin.murphy@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

It's useless to print machine name and setup arch-specific system
identifiers if of_flat_dt_get_machine_name() return NULL, especially
when ACPI-based boot.
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Unfortunately, it turns out that mismatched CPU features in big.LITTLE
systems are starting to appear in the wild. Whilst we should continue to
taint the kernel with CPU_OUT_OF_SPEC for features that differ in ways
that we can't fix up, dumping a useless backtrace out of the cpufeature
code is pointless and irritating.

This patch removes the backtrace from the taint.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

arm64's mm/mmu.c uses vm_area_add_early, struct vm_area and other
definitions  but relies on implict inclusion of linux/vmalloc.h which
means that changes in other headers could break the build. Thus, add an
explicit include.
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Generic code expects show_regs() to dump the stack, but arm64's
show_regs() does not. This makes it hard to debug softlockups and
other issues that result in show_regs() being called.

This patch updates arm64's show_regs() to dump the stack, as common
code expects.
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NKefeng Wang <wangkefeng.wang@huawei.com>
[will: folded in bug_handler fix from mrutland]
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Generic code expects show_regs() to also dump the stack, but arm64's
show_reg() does not do this. Some arm64 callers of show_regs() *only*
want the registers dumped, without the stack.

To enable generic code to work as expected, we need to make
show_regs() dump the stack. Where we only want the registers dumped,
we must use __show_regs().

This patch updates code to use __show_regs() where only registers are
desired. A subsequent patch will modify show_regs().
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Like arch/arm/, we inherit the READ_IMPLIES_EXEC personality flag across
fork(). This is undesirable for a number of reasons:

  * ELF files that don't require executable stack can end up with it
    anyway

  * We end up performing un-necessary I-cache maintenance when mapping
    what should be non-executable pages

  * Restricting what is executable is generally desirable when defending
    against overflow attacks

This patch clears the personality flag when setting up the personality for
newly spwaned native tasks. Given that semi-recent AArch64 toolchains emit
a non-executable PT_GNU_STACK header, userspace applications can already
not rely on READ_IMPLIES_EXEC so shouldn't be adversely affected by this
change.

Cc: <stable@vger.kernel.org>
Reported-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NDong Bo <dongbo4@huawei.com>
[will: added comment to compat code, rewrote commit message]
Signed-off-by: NWill Deacon <will.deacon@arm.com>

Pull thermal SoC management fixes from Eduardo Valentin:

 - fixes to TI SoC driver, Broadcom, qoriq

 - small sparse warning fix on thermal core

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
  thermal: broadcom: ns-thermal: default on iProc SoCs
  ti-soc-thermal: Fix a typo in a comment line
  ti-soc-thermal: Delete error messages for failed memory allocations in ti_bandgap_build()
  ti-soc-thermal: Use devm_kcalloc() in ti_bandgap_build()
  thermal: core: make thermal_emergency_poweroff static
  thermal: qoriq: remove useless call for of_thermal_get_trip_points()

Pull tty/serial fixes from Greg KH:
 "Here are some serial and tty fixes for 4.12-rc3. They are a bit bigger
  than normal, which is why I had them bake in linux-next for a few
  weeks and didn't send them to you for -rc2.

  They revert a few of the serdev patches from 4.12-rc1, and bring
  things back to how they were in 4.11, to try to make things a bit more
  stable there. Rob and Johan both agree that this is the way forward,
  so this isn't people squabbling over semantics. Other than that, just
  a few minor serial driver fixes that people have had problems with.

  All of these have been in linux-next for a few weeks with no reported
  issues"

* tag 'tty-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: altera_uart: call iounmap() at driver remove
  serial: imx: ensure UCR3 and UFCR are setup correctly
  MAINTAINERS/serial: Change maintainer of jsm driver
  serial: enable serdev support
  tty/serdev: add serdev registration interface
  serdev: Restore serdev_device_write_buf for atomic context
  serial: core: fix crash in uart_suspend_port
  tty: fix port buffer locking
  tty: ehv_bytechan: clean up init error handling
  serial: ifx6x60: fix use-after-free on module unload
  serial: altera_jtaguart: adding iounmap()
  serial: exar: Fix stuck MSIs
  serial: efm32: Fix parity management in 'efm32_uart_console_get_options()'
  serdev: fix tty-port client deregistration
  Revert "tty_port: register tty ports with serdev bus"
  drivers/tty: 8250: only call fintek_8250_probe when doing port I/O

Pull powerpc fixes from Michael Ellerman:
 "Fix running SPU programs on Cell, and a few other minor fixes.

  Thanks to Alistair Popple, Jeremy Kerr, Michael Neuling, Nicholas
  Piggin"

* tag 'powerpc-4.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc: Add PPC_FEATURE userspace bits for SCV and DARN instructions
  powerpc/spufs: Fix hash faults for kernel regions
  powerpc: Fix booting P9 hash with CONFIG_PPC_RADIX_MMU=N
  powerpc/powernv/npu-dma.c: Fix opal_npu_destroy_context() call
  selftests/powerpc: Fix TM resched DSCR test with some compilers

Pull x86 fixes from Thomas Gleixner:
 "A series of fixes for X86:

   - The final fix for the end-of-stack issue in the unwinder
   - Handle non PAT systems gracefully
   - Prevent access to uninitiliazed memory
   - Move early delay calaibration after basic init
   - Fix Kconfig help text
   - Fix a cross compile issue
   - Unbreak older make versions"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/timers: Move simple_udelay_calibration past init_hypervisor_platform
  x86/alternatives: Prevent uninitialized stack byte read in apply_alternatives()
  x86/PAT: Fix Xorg regression on CPUs that don't support PAT
  x86/watchdog: Fix Kconfig help text file path reference to lockup watchdog documentation
  x86/build: Permit building with old make versions
  x86/unwind: Add end-of-stack check for ftrace handlers
  Revert "x86/entry: Fix the end of the stack for newly forked tasks"
  x86/boot: Use CROSS_COMPILE prefix for readelf

Pull timer fixlet from Thomas Gleixner:
 "Silence dmesg spam by making the posix cpu timer printks depend on
  print_fatal_signals"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-timers: Make signal printks conditional

Pull RAS fixes from Thomas Gleixner:
 "Two fixlets for RAS:

   - Export memory_error() so the NFIT module can utilize it

   - Handle memory errors in NFIT correctly"

* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  acpi, nfit: Fix the memory error check in nfit_handle_mce()
  x86/MCE: Export memory_error()

Pull perf tooling fixes from Thomas Gleixner:

 - Synchronization of tools and kernel headers

 - A series of fixes for perf report addressing various failures:
    * Handle invalid maps proper
    * Plug a memory leak
    * Handle frames and callchain order correctly

 - Fixes for handling inlines and children mode

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tools/include: Sync kernel ABI headers with tooling headers
  perf tools: Put caller above callee in --children mode
  perf report: Do not drop last inlined frame
  perf report: Always honor callchain order for inlined nodes
  perf script: Add --inline option for debugging
  perf report: Fix off-by-one for non-activation frames
  perf report: Fix memory leak in addr2line when called by addr2inlines
  perf report: Don't crash on invalid maps in `-g srcline` mode

Pull locking fix from Thomas Gleixner:
 "A fix for a state leak which was introduced in the recent rework of
  futex/rtmutex interaction"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex,rt_mutex: Fix rt_mutex_cleanup_proxy_lock()

Pull kthread fix from Thomas Gleixner:
 "A single fix which prevents a use after free when kthread fork fails"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  kthread: Fix use-after-free if kthread fork fails

Pull ftrace fixes from Steven Rostedt:
 "There's been a few memory issues found with ftrace.

  One was simply a memory leak where not all was being freed that should
  have been in releasing a file pointer on set_graph_function.

  Then Thomas found that the ftrace trampolines were marked for
  read/write as well as execute. To shrink the possible attack surface,
  he added calls to set them to ro. Which also uncovered some other
  issues with freeing module allocated memory that had its permissions
  changed.

  Kprobes had a similar issue which is fixed and a selftest was added to
  trigger that issue again"

* tag 'trace-v4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  x86/ftrace: Make sure that ftrace trampolines are not RWX
  x86/mm/ftrace: Do not bug in early boot on irqs_disabled in cpu_flush_range()
  selftests/ftrace: Add a testcase for many kprobe events
  kprobes/x86: Fix to set RWX bits correctly before releasing trampoline
  ftrace: Fix memory leak in ftrace_graph_release()

ftrace use module_alloc() to allocate trampoline pages. The mapping of
module_alloc() is RWX, which makes sense as the memory is written to right
after allocation. But nothing makes these pages RO after writing to them.

Add proper set_memory_rw/ro() calls to protect the trampolines after
modification.

Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1705251056410.1862@nanosSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

With function tracing starting in early bootup and having its trampoline
pages being read only, a bug triggered with the following:

kernel BUG at arch/x86/mm/pageattr.c:189!
invalid opcode: 0000 [#1] SMP
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 4.12.0-rc2-test+ #3
Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014
task: ffffffffb4222500 task.stack: ffffffffb4200000
RIP: 0010:change_page_attr_set_clr+0x269/0x302
RSP: 0000:ffffffffb4203c88 EFLAGS: 00010046
RAX: 0000000000000046 RBX: 0000000000000000 RCX: 00000001b6000000
RDX: ffffffffb4203d40 RSI: 0000000000000000 RDI: ffffffffb4240d60
RBP: ffffffffb4203d18 R08: 00000001b6000000 R09: 0000000000000001
R10: ffffffffb4203aa8 R11: 0000000000000003 R12: ffffffffc029b000
R13: ffffffffb4203d40 R14: 0000000000000001 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff9a639ea00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff9a636b384000 CR3: 00000001ea21d000 CR4: 00000000000406b0
Call Trace:
 change_page_attr_clear+0x1f/0x21
 set_memory_ro+0x1e/0x20
 arch_ftrace_update_trampoline+0x207/0x21c
 ? ftrace_caller+0x64/0x64
 ? 0xffffffffc029b000
 ftrace_startup+0xf4/0x198
 register_ftrace_function+0x26/0x3c
 function_trace_init+0x5e/0x73
 tracer_init+0x1e/0x23
 tracing_set_tracer+0x127/0x15a
 register_tracer+0x19b/0x1bc
 init_function_trace+0x90/0x92
 early_trace_init+0x236/0x2b3
 start_kernel+0x200/0x3f5
 x86_64_start_reservations+0x29/0x2b
 x86_64_start_kernel+0x17c/0x18f
 secondary_startup_64+0x9f/0x9f
 ? secondary_startup_64+0x9f/0x9f

Interrupts should not be enabled at this early in the boot process. It is
also fine to leave interrupts enabled during this time as there's only one
CPU running, and on_each_cpu() means to only run on the current CPU.

If early_boot_irqs_disabled is set, it is safe to run cpu_flush_range() with
interrupts disabled. Don't trigger a BUG_ON() in that case.

Link: http://lkml.kernel.org/r/20170526093717.0be3b849@gandalf.local.homeSuggested-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Add a testcase to test kprobes via ftrace interface
with many concurrent kprobe events.

This tries to add many kprobe events (up to 256) on
kernel functions. To avoid making ftrace-based
kprobes (kprobes on fentry), it skips first N bytes
(on x86 N=5, on ppc or arm N=4) of function entry.
After that, it enables all those events, disable it,
and remove it.

Since the unoptimization buffer reclaiming will
be delayed, after removing events, it will wait
enough time.

Link: http://lkml.kernel.org/r/149577388470.11702.11832460851769204511.stgit@devboxSigned-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Suggested-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Fix kprobes to set(recover) RWX bits correctly on trampoline
buffer before releasing it. Releasing readonly page to
module_memfree() crash the kernel.

Without this fix, if kprobes user register a bunch of kprobes
in function body (since kprobes on function entry usually
use ftrace) and unregister it, kernel hits a BUG and crash.

Link: http://lkml.kernel.org/r/149570868652.3518.14120169373590420503.stgit@devboxSigned-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Fixes: d0381c81 ("kprobes/x86: Set kprobes pages read-only")
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

ftrace_hash is being kfree'ed in ftrace_graph_release(), however the
->buckets field is not.  This results in a memory leak that is easily
captured by kmemleak:

unreferenced object 0xffff880038afe000 (size 8192):
  comm "trace-cmd", pid 238, jiffies 4294916898 (age 9.736s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff815f561e>] kmemleak_alloc+0x4e/0xb0
    [<ffffffff8113964d>] __kmalloc+0x12d/0x1a0
    [<ffffffff810bf6d1>] alloc_ftrace_hash+0x51/0x80
    [<ffffffff810c0523>] __ftrace_graph_open.isra.39.constprop.46+0xa3/0x100
    [<ffffffff810c05e8>] ftrace_graph_open+0x68/0xa0
    [<ffffffff8114003d>] do_dentry_open.isra.1+0x1bd/0x2d0
    [<ffffffff81140df7>] vfs_open+0x47/0x60
    [<ffffffff81150f95>] path_openat+0x2a5/0x1020
    [<ffffffff81152d6a>] do_filp_open+0x8a/0xf0
    [<ffffffff811411df>] do_sys_open+0x12f/0x200
    [<ffffffff811412ce>] SyS_open+0x1e/0x20
    [<ffffffff815fa6e0>] entry_SYSCALL_64_fastpath+0x13/0x94
    [<ffffffffffffffff>] 0xffffffffffffffff

Link: http://lkml.kernel.org/r/20170525152038.7661-1-lhenriques@suse.com

Cc: stable@vger.kernel.org
Fixes: b9b0c831 ("ftrace: Convert graph filter to use hash tables")
Signed-off-by: NLuis Henriques <lhenriques@suse.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Pull input layer fixes from Dmitry Torokhov:
 "Just a few fixups to a couple of drivers"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elan_i2c - ignore signals when finishing updating firmware
  Input: elan_i2c - clear INT before resetting controller
  Input: atmel_mxt_ts - add T100 as a readable object
  Input: edt-ft5x06 - increase allowed data range for threshold parameter

Merge tag 'led_fixes_for_4-12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED fix from Jacek Anaszewski:
 "A single LED fix for 4.12-rc3.

  leds-pca955x driver uses only i2c_smbus API and thus it should pass
  I2C_FUNC_SMBUS_BYTE_DATA flag to i2c_check_functionality"

* tag 'led_fixes_for_4-12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: pca955x: Correct I2C Functionality

Pull networking fixes from David Miller:

 1) Fix state pruning in bpf verifier wrt. alignment, from Daniel
    Borkmann.

 2) Handle non-linear SKBs properly in SCTP ICMP parsing, from Davide
    Caratti.

 3) Fix bit field definitions for rss_hash_type of descriptors in mlx5
    driver, from Jesper Brouer.

 4) Defer slave->link updates until bonding is ready to do a full commit
    to the new settings, from Nithin Sujir.

 5) Properly reference count ipv4 FIB metrics to avoid use after free
    situations, from Eric Dumazet and several others including Cong Wang
    and Julian Anastasov.

 6) Fix races in llc_ui_bind(), from Lin Zhang.

 7) Fix regression of ESP UDP encapsulation for TCP packets, from
    Steffen Klassert.

 8) Fix mdio-octeon driver Kconfig deps, from Randy Dunlap.

 9) Fix regression in setting DSCP on ipv6/GRE encapsulation, from Peter
    Dawson.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
  ipv4: add reference counting to metrics
  net: ethernet: ax88796: don't call free_irq without request_irq first
  ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets
  sctp: fix ICMP processing if skb is non-linear
  net: llc: add lock_sock in llc_ui_bind to avoid a race condition
  bonding: Don't update slave->link until ready to commit
  test_bpf: Add a couple of tests for BPF_JSGE.
  bpf: add various verifier test cases
  bpf: fix wrong exposure of map_flags into fdinfo for lpm
  bpf: add bpf_clone_redirect to bpf_helper_changes_pkt_data
  bpf: properly reset caller saved regs after helper call and ld_abs/ind
  bpf: fix incorrect pruning decision when alignment must be tracked
  arp: fixed -Wuninitialized compiler warning
  tcp: avoid fastopen API to be used on AF_UNSPEC
  net: move somaxconn init from sysctl code
  net: fix potential null pointer dereference
  geneve: fix fill_info when using collect_metadata
  virtio-net: enable TSO/checksum offloads for Q-in-Q vlans
  be2net: Fix offload features for Q-in-Q packets
  vlan: Fix tcp checksum offloads in Q-in-Q vlans
  ...

Pull XFS fixes from Darrick Wong:
 "A few miscellaneous bug fixes & cleanups:

   - Fix indlen block reservation accounting bug when splitting delalloc
     extent

   - Fix warnings about unused variables that appeared in -rc1.

   - Don't spew errors when bmapping a local format directory

   - Fix an off-by-one error in a delalloc eof assertion

   - Make fsmap only return inode information for CAP_SYS_ADMIN

   - Fix a potential mount time deadlock recovering cow extents

   - Fix unaligned memory access in _btree_visit_blocks

   - Fix various SEEK_HOLE/SEEK_DATA bugs"

* tag 'xfs-4.12-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: Move handling of missing page into one place in xfs_find_get_desired_pgoff()
  xfs: Fix off-by-in in loop termination in xfs_find_get_desired_pgoff()
  xfs: Fix missed holes in SEEK_HOLE implementation
  xfs: fix off-by-one on max nr_pages in xfs_find_get_desired_pgoff()
  xfs: fix unaligned access in xfs_btree_visit_blocks
  xfs: avoid mount-time deadlock in CoW extent recovery
  xfs: only return detailed fsmap info if the caller has CAP_SYS_ADMIN
  xfs: bad assertion for delalloc an extent that start at i_size
  xfs: fix warnings about unused stack variables
  xfs: BMAPX shouldn't barf on inline-format directories
  xfs: fix indlen accounting error on partial delalloc conversion

Andrey Konovalov reported crashes in ipv4_mtu()

I could reproduce the issue with KASAN kernels, between
10.246.7.151 and 10.246.7.152 :

1) 20 concurrent netperf -t TCP_RR -H 10.246.7.152 -l 1000 &

2) At the same time run following loop :
while :
do
 ip ro add 10.246.7.152 dev eth0 src 10.246.7.151 mtu 1500
 ip ro del 10.246.7.152 dev eth0 src 10.246.7.151 mtu 1500
done

Cong Wang attempted to add back rt->fi in commit
82486aa6 ("ipv4: restore rt->fi for reference counting")
but this proved to add some issues that were complex to solve.

Instead, I suggested to add a refcount to the metrics themselves,
being a standalone object (in particular, no reference to other objects)

I tried to make this patch as small as possible to ease its backport,
instead of being super clean. Note that we believe that only ipv4 dst
need to take care of the metric refcount. But if this is wrong,
this patch adds the basic infrastructure to extend this to other
families.

Many thanks to Julian Anastasov for reviewing this patch, and Cong Wang
for his efforts on this problem.

Fixes: 2860583f ("ipv4: Kill rt->fi")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NAndrey Konovalov <andreyknvl@google.com>
Reviewed-by: NJulian Anastasov <ja@ssi.bg>
Acked-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>