This header contains the timings for the common CEA-861 and all VESA
DMT formats for use with the V4L2 dv_timings API.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

These new ioctls make it possible for the dv_timings API to replace
the dv_preset API eventually.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

When the device is physically unplugged but there are still
open file handles, resource release is defered until last
opened handle is closed.
This patch fixes a missing em28xx_fh struct release.
Tested by compilation only.
Signed-off-by: NEzequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

It has been indicated on Atmark Techno Web page
http://armadillo.atmark-techno.com/faq/a800eva-dont-work-cameraSigned-off-by: NMasahiro Nakai <nakai@atmark-techno.com>
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

CAMCR::DTIF feild controls camera bus as upper8bit/16bit/lower8bit.
This patch manages unmanaged lower 8bit bus
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

VIDIOC_TRY_FMT shouldn't fail if the user requests an unsupported pixel
format. Instead the driver should replace it with a supported one. Fix the
sh_mobile_ceu_camera driver accordingly.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The recently introduced .enum_mbus_fsizes() v4l2-subdev video operation is
a duplicate of the .enum_framesizes() operation, introduced earlier. Switch
soc-camera over to using the original one.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

In mx2_camera_try_fmt(), when applying i.MX25 restrictions to frame sizes,
the height is checked to be <= 0xffff. But later an integer multiplication
height * 4 * 0x3ffff is performed, which will overflow even for bounded
height values. This patch switches to using 64-bit multiplication and
division to avoid overflowing.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

In image mode, the CEU allows configurable line strides up to 8188
pixels.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
[g.liakhovetski@gmx.de: unify sh_mobile_ceu_set_rect() in data-fetch mode]
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add a capabilities field to the soc_camera_host structure to flag hosts
that support user-configurable line strides. soc_camera_try_fmt() then
passes the user-provided bytesperline and sizeimage format fields to
such hosts, and expects the host to check (and fix if needed) the
values.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
[g.liakhovetski@gmx.de: fix a typo in mx2_camera.c]
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Use the new soc_mbus_image_size() function to compute the image size.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Compute the bytesperline and sizeimage values when trying/setting
formats or when allocating buffers by taking the user-requested values
into account.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The function returns the minimum size of an image for a given number of
bytes per line (as per the V4L2 specification), width and format.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The V4L2 specification defines bytesperline for planar formats as the
number of bytes per line for the largest plane. Modify
soc_mbus_bytes_per_line() accordingly.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

To compute the value of the v4l2_pix_format::bytesperline field, we need
information about planes layout for planar formats. The new enum
soc_mbus_layout conveys that information.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Instead of computing the line sizes, use the previously negotiated
soc_camera_device::bytesperline value.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Instead of computing the buffer size manually in the videobuf queue
setup and buffer prepare callbacks, use the previously negotiated
soc_camera_device::sizeimage value.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The try_fmt() handler restricts the image width based on the hardware
limits and updates the bytesperline value, but doesn't update sizeimage.
Fix it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fix a trivial alignment calculation issue.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove smiapp-debug.h and let people use CONFIG_DYNAMIC_DEBUG instead. The
option only affected to when debug information was being printed.
Signed-off-by: NSakari Ailus <sakari.ailus@maxwell.research.nokia.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJim Cromie <jim.cromie@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch fixes following compilation warning:
Error: no ID for constraint linkend: v4l2-jpeg-chroma-subsampling.

and adds missing JPEG control class at the Table A.58.
Signed-off-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Clean-up dvb_usb_device_properties and fix errors
reported by checkpatch.pl.

Some other very minor changes. Functionality remains
untouched.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The usage of ../*.h breaks out-of-tree compilation and likely breaks
compilation when O= argument is used. Instead of doing that,
just add the include path via Makefile.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove MX2_CAMERA_SWAP16 and MX2_CAMERA_PACK_DIR_MSB flags
so that the driver can negotiate with the attached sensor
whether the mbus format needs convertion from UYUV to YUYV
or not.
Signed-off-by: NJavier Martin <javier.martin@vista-silicon.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJavier Martin <javier.martin@vista-silicon.com>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

According to p.14 fig 3-3 of the datasheet (SLES098A)
this decoder transmits data in UYVY format.
Signed-off-by: NJavier Martin <javier.martin@vista-silicon.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The patch replaces Dib*Lock macros with direct calls to mutex functions
as soon as they just make the driver code harder to review
(per request of Mauro).
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

DVB USB core refuses to	load driver when current USB ID
does not match IDs on driver table. Due to that dynamic
IDs does not work. Replace reference design ID by dynamic
ID in .probe() in order to get it working.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Firmware for the PCTV QuatroStick nano (520e).
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

In 'dib0700_i2c_xfer_new()' and 'dib0700_i2c_xfer_legacy()'
we are taking two locks:
                1. i2c_mutex
                2. usb_mutex
If attempt to take 'usb_mutex' lock fails then the previously taken
lock 'i2c_mutex' should be unlocked and -EINTR should be returned so
that caller can take appropriate action.

If locking attempt was interrupted by a signal then
we should return -EINTR. At present we are returning '0' for
such scenarios  which is wrong.

Replace -EAGAIN by -EINTR as a return type for the the scenario
where locking attempt was interrupted by signal.
Signed-off-by: NSantosh Nayak <santoshprasadnayak@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

MPIS based STBs running 3.x kernels and the Enigma2 OS are not able to tune
DVB-T channels with the PCTV 290e using the current cxd2820r driver.
DVB-T2 channels instead work properly.

This patch fixes the problem by changing the condition to break out from the
wait lock loop in the "search" function of the cxd2820r demodulator from
FE_HAS_SIGNAL to FE_HAS_LOCK.

As a consequence, the "search" function of the demodulator driver now returns
DVBFE_ALGO_SEARCH_SUCCESS only if the frequency lock is successfully acquired.

This behavior seems consistent with other demodulator drivers (e.g. stv090x,
hd29l2, stv0900, stb0899, mb86a16).

This patch has been successfully tested with DVB-T and DVB-T2 signals,
on both PC and the mipsel STB running Enigma2.
No apparent side effect has been observed on PC applications like Kaffeine.
DVB-C is not available in my country so it's not tested.
Signed-off-by: NGianluca Gennari <gennarone@gmail.com>
Acked-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Enable the LNA amplifier also for DVB-T (like for DVB-T2 and DVB-C);
this greatly improves reception of weak signals without affecting the reception
of the strong ones.

Experimental data (collected with the mipsel STB) on the weakest frequencies
available in my area:

LNA OFF:

MUX          level   BER     picture

RAI mux 4    72%     32000   corrupted
TIMB 2       75%     14      OK
TVA Vicenza  68%     32000   corrupted
RAI mux 2    78%     14      OK

LNA ON:

MUX          level   BER     picture

RAI mux 4    73%     1500    OK
TIMB 2       76%     0       OK
TVA Vicenza  69%     0       OK
RAI mux 2    79%     0       OK

Moreover, with LNA enabled, the PCTV 290e was able to pick up 2 new frequencies
matching the integrated tuner of my Panasonic G20 TV, which is really good.
Signed-off-by: NGianluca Gennari <gennarone@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

As reported by Masanari, this macro is using "KERN_ERR"
instead of "KERN_ERROR". That would lead into a compilation
breakage, if this macro were used somewhere inside the driver.

Instead of fixing the macro, as originally proposed, let's just
remove the dead code.
Reported-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The patch splits easycap_delete(), which is in charge of
buffer deallocation, into smaller functions each
deallocating a specific kind of buffer.
Signed-off-by: NEzequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NEzequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NEzequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

When the device is probed, this driver allocates
audio buffers, and audio urbs.
This patch just split this into separate functions,
which helps clearing the currently gigantic probe function.
Signed-off-by: NEzequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>