- 05 8月, 2015 1 次提交
-
-
由 K. Y. Srinivasan 提交于
The guest may have to send a completion packet back to the host. To support this usage, permit sending a packet without a payload - we would be only sending the descriptor in this case. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 13 6月, 2015 1 次提交
-
-
由 K. Y. Srinivasan 提交于
Allocate ring buffer memory from the NUMA node assigned to the channel. Since this is a performance and not a correctness issue, if the node specific allocation were to fail, fall back and allocate without specifying the node. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 25 5月, 2015 1 次提交
-
-
由 Vitaly Kuznetsov 提交于
In case there was an error reported in the response to the CHANNELMSG_OPENCHANNEL call we need to do the cleanup as a vmbus_open() user won't be doing it after receiving an error. The cleanup should be done on all failure paths. We also need to avoid returning open_info->response.open_result.status as the return value as all other errors we return from vmbus_open() are -EXXX and vmbus_open() callers are not supposed to analyze host error codes. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 25 3月, 2015 3 次提交
-
-
由 K. Y. Srinivasan 提交于
Handle the case when the write to the ringbuffer fails. In this case, unconditionally signal the host. Since we may have deferred signalling the host based on the kick_q parameter, signalling the host unconditionally in this case deals with the issue. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 K. Y. Srinivasan 提交于
Export the vmbus_sendpacket_pagebuffer_ctl() interface. This export will be used by the netvsc driver. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 K. Y. Srinivasan 提交于
When a channel has been rescinded, the close operation is a noop. Restructure the code so we deal with the rescind condition after we properly cleanup the channel. I would like to thank Dexuan Cui <decui@microsoft.com> for observing this problem. The current code leaks memory when the channel is rescinded. The current char-next branch is broken and this patch fixes the bug. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 02 3月, 2015 6 次提交
-
-
由 K. Y. Srinivasan 提交于
Implement an API that gives additional control on the what VMBUS flags will be set as well as if the host needs to be signalled. This API will be useful for clients that want to batch up requests to the host. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 K. Y. Srinivasan 提交于
Implement an API for sending pagebuffers that gives more control to the client in terms of setting the vmbus flags as well as deciding when to notify the host. This will be useful for enabling batch processing. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 K. Y. Srinivasan 提交于
In response to a rescind message, we need to remove the channel and the corresponding device. Cleanup this code path by factoring out the code to remove a channel. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 K. Y. Srinivasan 提交于
Correctly rollback state if the failure occurs after we have handed over the ownership of the buffer to the host. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Nicholas Mc Guire 提交于
return type of wait_for_completion_timeout is unsigned long not int, this patch changes the type of t from int to unsigned long. Signed-off-by: NNicholas Mc Guire <der.herr@hofr.at> Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Dexuan Cui 提交于
Without this patch, the state is put to CHANNEL_OPENING_STATE, and when the driver is loaded next time, vmbus_open() will fail immediately due to newchannel->state != CHANNEL_OPEN_STATE. CC: "K. Y. Srinivasan" <kys@microsoft.com> Signed-off-by: NDexuan Cui <decui@microsoft.com> Reviewed-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 26 1月, 2015 3 次提交
-
-
由 Vitaly Kuznetsov 提交于
sc_lock spinlock in struct vmbus_channel is being used to not only protect the sc_list field, e.g. vmbus_open() function uses it to implement test-and-set access to the state field. Rename it to the more generic 'lock' and add the description. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Acked-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 K. Y. Srinivasan 提交于
Currently, the API for sending a multi-page buffer over VMBUS is limited to a maximum pfn array of MAX_MULTIPAGE_BUFFER_COUNT. This limitation is not imposed by the host and unnecessarily limits the maximum payload that can be sent. Implement an API that does not have this restriction. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 K. Y. Srinivasan 提交于
Correctly compute the local (gpadl) handle. I would like to thank Michael Brown <mcb30@ipxe.org> for seeing this bug. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Reported-by: NMichael Brown <mcb30@ipxe.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 24 9月, 2014 5 次提交
-
-
由 K. Y. Srinivasan 提交于
Disable preemption when sampling current processor ID when preemption is otherwise possible. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Tested-by: NSitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 K. Y. Srinivasan 提交于
Eliminate calls to BUG_ON() in vmbus_close_internal(). We have chosen to potentially leak memory, than crash the guest in case of failures. In this version of the patch I have addressed comments from Dan Carpenter (dan.carpenter@oracle.com). Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Cc: <stable@vger.kernel.org> Tested-by: NSitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 K. Y. Srinivasan 提交于
Fix a bug in vmbus_open() and properly propagate the error. I would like to thank Dexuan Cui <decui@microsoft.com> for identifying the issue. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Cc: <stable@vger.kernel.org> Tested-by: NSitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 K. Y. Srinivasan 提交于
Eliminate the call to BUG_ON() by waiting for the host to respond. We are trying to reclaim the ownership of memory that was given to the host and so we will have to wait until the host responds. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Cc: <stable@vger.kernel.org> Tested-by: NSitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 K. Y. Srinivasan 提交于
Eliminate calls to BUG_ON() by properly handling errors. In cases where rollback is possible, we will return the appropriate error to have the calling code decide how to rollback state. In the case where we are transferring ownership of the guest physical pages to the host, we will wait for the host to respond. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Cc: <stable@vger.kernel.org> Tested-by: NSitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 10 7月, 2014 1 次提交
-
-
由 Jason Wang 提交于
All its callers depends on the return value of -ENOBUFS to reallocate a bigger buffer and retry the receiving. So there's no need to call pr_err() here since it was not a real issue, otherwise syslog will be flooded by this false warning. Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 04 5月, 2014 2 次提交
-
-
由 Tobias Klauser 提交于
pfncount is of type u32 and thus can never be smaller than 0. Found by the coverity scanner, CID 143213. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 K. Y. Srinivasan 提交于
By ensuring that we set the callback handler to NULL in the channel close path on the same CPU that the channel is bound to, we can eliminate this lock acquisition and release in a performance critical path. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 08 2月, 2014 1 次提交
-
-
由 K. Y. Srinivasan 提交于
The current channel code is using scatterlist abstraction to pass data to the ringbuffer API on the send path. This causes unnecessary translations between virtual and physical addresses. Fix this. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 28 1月, 2014 1 次提交
-
-
由 Haiyang Zhang 提交于
This will allow us to use bigger receive buffer, and prevent allocation failure due to fragmented memory. Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com> Reviewed-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 9月, 2013 11 次提交
-
-
由 Dan Carpenter 提交于
Don't return success if the buffer has not been initialized. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
It's only used once, only contains 2 function calls, so just make those calls directly, deleting the function, and the now unneeded structure entirely. Tested-by: N"K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
This moves the "client_monitor_conn_id" and "server_monitor_conn_id" bus attributes to the dev_groups structure, removing the need for it to be in a temporary structure. Tested-by: N"K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
This moves the "client_monitor_latency" and "server_monitor_latency" bus attributes to the dev_groups structure, removing the need for it to be in a temporary structure. Tested-by: N"K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
This moves the "client_monitor_pending" and "server_monitor_pending" bus attributes to the dev_groups structure, removing the need for it to be in a temporary structure. Tested-by: N"K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
monitor_pages was a void pointer, containing an unknown number of arrays that we just "knew" were a child and parent array of a specific size. Instead of that implicit knowledge, let's make them a real pointer, allowing us to have type safety, and a semblance of sane addressing schemes. Tested-by: N"K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
This moves the "device_id" bus attribute to the dev_groups structure, removing the need for it to be in a temporary structure. Tested-by: N"K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
This moves the "class_id" bus attribute to the dev_groups structure, removing the need for it to be in a temporary structure. Tested-by: N"K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
This moves the "state" bus attribute to the dev_groups structure, removing the need for it to be in a temporary structure. Tested-by: N"K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
This moves the "state" bus attribute to the dev_groups structure, removing the need for it to be in a temporary structure. Tested-by: N"K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
This patch is the first in a series that moves the hv bus code to use the dev_groups field instead of dev_attrs, as dev_attrs is going away in future kernel releases. It moves the id sysfs file to the dev_groups structure, and creates the needed show/store functions, instead of relying on one "universal" function for this. By doing this, it removes the need for this to be in a temporary structure. Tested-by: N"K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 04 6月, 2013 1 次提交
-
-
由 K. Y. Srinivasan 提交于
Starting with Win8, the host supports multiple sub-channels for a given device. As in the past, the initial channel offer specifies the device and is associated with both the type and the instance GUIDs. For performance critical devices, the host may support multiple sub-channels. The sub-channels share the same type and instance GUID as the primary channel. The number of sub-channels offerrred to the guest depends on the number of virtual CPUs assigned to the guest. The guest can request the creation of these sub-channels and once created and opened, the guest can distribute the traffic across all the channels (the primary and the sub-channels). A request sent on a sub-channel will have the response delivered on the same sub-channel. At channel (sub-channel) creation we bind the channel interrupt to a CPU and with this sub-channel support we will be able to spread the interrupt load of a given device across all available CPUs. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 18 1月, 2013 3 次提交
-
-
由 Wei Yongjun 提交于
The variable userlen is initialized but never used otherwise, so remove the unused variable. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 K. Y. Srinivasan 提交于
Implement flow management on the send side. When the sender is blocked, the reader can potentially signal the sender to indicate there is now room to send. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 K. Y. Srinivasan 提交于
Add state to bind a channel to a specific VCPU. This will help us better distribute incoming interrupt load. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-