Add support for XDP. Implement ndo_bpf and ndo_xdp_xmit.  Upon load of
an XDP program, allocate additional Tx rings for dedicated XDP use.
The following actions are supported: XDP_TX, XDP_DROP, XDP_REDIRECT,
XDP_PASS, and XDP_ABORTED.
Signed-off-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

There's no reason for treating DCB as first class citizen when configuring
the Tx queues and going through TCs. Reverse the logic and base the
configuration logic on rings, which is the object of interest anyway.
Signed-off-by: NMaciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Remove a few uses of kernel configuration flags from ice_lib.c by
introducing a new source file ice_base.c. Also move corresponding
function prototypes from ice_lib.h to ice_base.h and include ice_base.h
where required.
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/isdn/hardware/mISDN/mISDNisar.c:30:17:
 warning: faxmodulation_s defined but not used [-Wunused-const-variable=]

It is never used, so can be removed.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The IDT ClockMatrix (TM) family includes integrated devices that provide
eight PLL channels.  Each PLL channel can be independently configured as a
frequency synthesizer, jitter attenuator, digitally controlled
oscillator (DCO), or a digital phase lock loop (DPLL).  Typically
these devices are used as timing references and clock sources for PTP
applications.  This patch adds support for the device.
Co-developed-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NVincent Cheng <vincent.cheng.xh@renesas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As reported in [0] at least one RTL8168dp version has problems
establishing a link. This chip version has an integrated RTL8211b PHY,
however the chip seems to report a wrong PHY ID, resulting in a wrong
PHY driver (for Generic Realtek PHY) being loaded.
Work around this issue by adding a hook to r8168dp_2_mdio_read()
for returning the correct PHY ID.

[0] https://bbs.archlinux.org/viewtopic.php?id=246508

Fixes: 242cd9b5 ("r8169: use phy_resume/phy_suspend")
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since it became possible for the DSA core to use a CPU port different
than 8, our bcm_sf2_imp_setup() function was broken because it assumes
that registers are applicable to port 8. In particular, the port's MAC
is going to stay disabled, so make sure we clear the RX_DIS and TX_DIS
bits if we are not configured for port 8.

Fixes: 9f91484f ("net: dsa: make "label" property optional for dsa2")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The phylink_dbg() macro does not follow dynamic debug or defined(DEBUG)
and as a result, it spams the kernel log since a PR_DEBUG level is
currently used. Fix it to be defined appropriately whether
CONFIG_DYNAMIC_DEBUG or defined(DEBUG) are set.

Fixes: 17091180 ("net: phylink: Add phylink_{printk, err, warn, info, dbg} macros")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Synces the DMA buffer properly in order for CPU and device to see
the most up-to-data data.
Signed-off-by: NYangchun Fu <yangchun@google.com>
Reviewed-by: NCatherine Sullivan <csully@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Historically linux tried to stick to RFC 791, 1122, 2003
for IPv4 ID field generation.

RFC 6864 made clear that no matter how hard we try,
we can not ensure unicity of IP ID within maximum
lifetime for all datagrams with a given source
address/destination address/protocol tuple.

Linux uses a per socket inet generator (inet_id), initialized
at connection startup with a XOR of 'jiffies' and other
fields that appear clear on the wire.

Thiemo Nagel pointed that this strategy is a privacy
concern as this provides 16 bits of entropy to fingerprint
devices.

Let's switch to a random starting point, this is just as
good as far as RFC 6864 is concerned and does not leak
anything critical.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NThiemo Nagel <tnagel@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Until now SW steering supported matchers that are IPv4 and IPv6.
The limitation was mixed matchers in which the outer header IP version
was different from the inner header IP version.

To support the mixed matcher we create all the possible ste_builder
combinations, once we create a rule we select the correct one to
be used for rule creation.
Signed-off-by: NAlex Vesker <valex@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Instead of using explicit indexes, simply use affinity
type enumerators to make the code more readable.

Fixes: 544fe7c2 ("net/mlx5e: Activate HW multipath and handle port affinity based on FIB events")
Signed-off-by: NErez Alfasi <ereza@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Instead of using explicit array indexes, simply use
ports enumerators to make the code more readable.

Fixes: 7907f23a ("net/mlx5: Implement RoCE LAG feature")
Signed-off-by: NErez Alfasi <ereza@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

when debug a bug, which triggers TX hang, and kernel log is
spammed with the following info message

    [ 1172.044764] mlx5_core 0000:21:00.0: cmd_work_handler:930:(pid 8):
    failed to allocate command entry
Signed-off-by: NLi RongQing <lirongqing@baidu.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Add support for rewriting of DSCP part of ToS field.
Next commands, for example, can be used to offload rewrite action:

OVS:
 $ ovs-ofctl add-flow ovs-sriov "ip, in_port=REP, \
       actions=mod_nw_tos:68, output:NIC"

iproute2 (used retain mask, as tc command rewrite whole ToS field):
 $ tc filter add dev REP ingress protocol ip prio 1 flower skip_sw \
       ip_proto icmp action pedit munge ip tos set 68 retain 0xfc pipe \
       action mirred egress redirect dev NIC
Signed-off-by: NDmytro Linkin <dmitrolin@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

This patch doesn't change any functionality, but is a pre-step for
adding support for rewriting of bit-sized fields, like DSCP and ECN
in IPv4 header, similar fields in IPv6, etc.
Signed-off-by: NDmytro Linkin <dmitrolin@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Move short Work Queue API getter functions into the WQ
header file.
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Dump the Work Queue's TX WQE descriptor when a completion with
error is received.

Example:
[5.331832] mlx5_core 0000:00:04.0 enp0s4: Error cqe on cqn 0xa, ci 0x1, TXQ-SQ qpn 0xe, opcode 0xd, syndrome 0x2, vendor syndrome 0x0
[5.333127] 00000000: 55 65 02 75 31 fe c2 d2 6b 6c 62 1e f9 e1 d8 5c
[5.333837] 00000010: d3 b2 6c b8 89 e4 84 20 0b f4 3c e0 f3 75 41 ca
[5.334568] 00000020: 46 00 00 00 cd 70 a0 92 18 3a 01 de 00 00 00 00
[5.335313] 00000030: 7d bc 05 89 b2 e9 00 02 1e 00 00 0e 00 00 30 d2
[5.335972] WQE DUMP: WQ size 1024 WQ cur size 0, WQE index 0x0, len: 64
[5.336710] 00000000: 00 00 00 1e 00 00 0e 04 00 00 00 08 00 00 00 00
[5.337524] 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 12 33 33
[5.338151] 00000020: 00 00 00 16 52 54 00 00 00 01 86 dd 60 00 00 00
[5.338740] 00000030: 00 00 00 48 00 00 00 00 00 00 00 00 66 ba 58 14
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

During connection tracking offloads with high number of connections,
(40K connections per second), flow table group lock contention is
observed.
To improve the performance by reducing lock contention, lockless
FTE read lookup is performed as described below.

Each flow table entry is refcounted.
Flow table entry is removed when refcount drops to zero.
rhash table allows rcu protected lookup.
Each hash table entry insertion and removal is write lock protected.

Hence, it is possible to perform lockless lookup in rhash table using
following scheme.

(a) Guard FTE entry lookup per group using rcu read lock.
(b) Before freeing the FTE entry, wait for all readers to finish
accessing the FTE.

Below example of one reader and write in parallel racing, shows
protection in effect with rcu lock.

lookup_fte_locked()
  rcu_read_lock();
  search_hash_table()
                                  existing_flow_group_write_lock();
                                  tree_put_node(fte)
                                    drop_ref_cnt(fte)
                                    del_sw_fte(fte)
                                    del_hash_table_entry();
                                    call_rcu();
                                  existing_flow_group_write_unlock();
  get_ref_cnt(fte) fails
  rcu_read_unlock();
                                  rcu grace period();
                                    [..]
                                    kmem_cache_free(fte);
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

FTE memory allocation using alloc_fte() doesn't have any dependency
on the flow group.
Hence, do not hold flow group lock while performing alloc_fte().
This helps to reduce contention of flow group lock.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Currently, mlx5 tc layer doesn't verify that rule has at least one forward
or drop action which leads to following firmware syndrome when user tries
to offload such action:

[ 1824.860501] mlx5_core 0000:81:00.0: mlx5_cmd_check:753:(pid 29458): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x144b7a)

Add check at the end of parse_tc_fdb_actions() that verifies that resulting
attribute has action fwd or drop flag set.
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Reviewed-by: NPaul Blakey <paulb@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

When setting number of VFs to 0 (disable SRIOV), clear VF's
configuration.
Signed-off-by: NAya Levin <ayal@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

mlx5_unload_one do not need local variable to store different value,
Hence just remove it.
Signed-off-by: Nzhong jiang <zhongjiang@huawei.com>
Acked-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Not all mlx5 cards with FPGA device use it for network processing.

mlx5_core driver configures network connection to FPGA device
for all mlx5 cards with installed FPGA. If FPGA is not a part of
network path, driver crashes in this case

Check FPGA name in function mlx5_fpga_device_start() and continue
integrate FPGA into packets flow only for dedicated cards.
Currently there are Newton and Edison cards.
Signed-off-by: NIgor Leshenko <igorle@mellanox.com>
Reviewed-by: NMeir Lichtinger <meirl@mellanox.com>
Reviewed-by: NBoris Pismenny <borisp@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Use kernel function to calculate crc32 Instead of dr implementation
since it has the same algorithm "slice by 8".

Fixes: 26d688e3 ("net/mlx5: DR, Add Steering entry (STE) utilities")
Signed-off-by: NHamdan Igbaria <hamdani@mellanox.com>
Reviewed-by: NAlex Vesker <valex@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

__IXGBE_RX_BUILD_SKB_ENABLED bit is already cleared.
Signed-off-by: NIgor Pylypiv <igor.pylypiv@gmail.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

In e1000_set_ringparam(), 'tx_old' and 'rx_old' are not deallocated if
e1000_up() fails, leading to memory leaks. Refactor the code to fix this
issue.
Signed-off-by: NWenwen Wang <wenwen@cs.uga.edu>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Magnus's fix to resolve a potential receive buffer starvation for AF_XDP
got applied to both the i40e_xsk_umem_enable/disable() functions, when it
should have only been applied to the "enable".  So clean up the undesired
code in the disable function.

CC: Magnus Karlsson <magnus.karlsson@intel.com>
Fixes: 1f459bdc ("i40e: fix potential RX buffer starvation for AF_XDP")
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>

At least on the i350 there is an annoying behavior that is maybe also
present on 82580 devices, but was probably not noticed yet as MAS is not
widely used.

If no cable is connected on both fiber/copper ports the media auto sense
code will constantly swap between them as part of the watchdog task and
produce many unnecessary kernel log messages.

The swap code responsible for this behavior (switching to fiber) should
not be executed if the current media type is copper and there is no signal
detected on the fiber port. In this case we can safely wait until the
AUTOSENSE_EN bit is cleared.
Signed-off-by: NManfred Rudigier <manfred.rudigier@omicronenergy.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The remove misses to disable and unprepare priv->macclk like what is done
when probe fails.
Add the missed call in remove.
Signed-off-by: NChuhong Yuan <hslester96@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

100BaseVG AnyLAN hasn't been useful since 1996 or so and even then
didn't sell many devices.  It's unlikely any are still in use.

Move the driver to staging with the intent of removing it altogether
one day.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NJaroslav Kysela <perex@perex.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Inform the RDMA driver to stop/start during suspend/resume.  The
RDMA driver needs to stop and start just like error recovery.
Signed-off-by: NPavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Notify the RDMA driver by calling the bnxt_ulp_stop()/bnxt_ulp_start()
hooks during error recovery.  The current ULP IRQ start/stop
sequence in error recovery (which is insufficient) is replaced with the
full reset sequence when we call bnxt_ulp_stop()/bnxt_ulp_start().
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We call bnxt_ulp_stop() to notify the RDMA driver that some error or
imminent reset is about to happen.  After that we always call
some variants of bnxt_close().

In the next patch, we will integrate the recently added error
recovery with the RDMA driver.  In response to ulp_stop, the
RDMA driver may free MSIX vectors and that will also trigger
bnxt_close().  To avoid bnxt_close() from being called twice,
we set a new flag after ulp_stop is called.  If the RDMA driver
frees MSIX vectors while the new flag is set, we will not call
bnxt_close(), knowing that it will happen in due course.

With this change, we must make sure that the bnxt_close() call
after ulp_stop will reset IRQ.  Modify bnxt_reset_task()
accordingly if we call ulp_stop.
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The decap (VXLAN tunnel) flow rules are not getting offloaded with
upstream kernel. This is because TC block callback infrastructure has
been updated to use indirect callbacks to get offloaded rules from
other higher level devices (such as tunnels), instead of ndo_setup_tc().
Since the decap rules are applied to the tunnel devices (e.g, vxlan_sys),
the driver should register for indirect TC callback with tunnel devices
to get the rules for offloading. This patch updates the driver to
register and process indirect TC block callbacks from VXLAN tunnels.
Signed-off-by: NSriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Provides support for modifying L3/L4 Header parameters to support NAT.
Sets the appropriate fields/bits in cfa_flow_alloc cmd.

Sample cmd for offloading an IPv4 flow with SNAT:

ovs-ofctl add-flow ovsbr0 "ip,nw_src=192.168.201.44 \
actions=mod_nw_src:203.31.220.144,output:p7p1"

Replace 'nw_src' with 'nw_dst' in above cmd for DNAT with IPv4

Sample cmd for offloading an IPv4 flow with SNAPT:

ovs-ofctl add-flow ovsbr0 "ip,nw_src=192.168.201.44 \
actions=mod_nw_src:203.31.220.144, mod_tp_src:6789,output:p7p1"

Similar to DNAT, replace 'tp_src' with 'tp_dst' for offloading flow
with DNAPT

Sample cmd for offloading an IPv6 flow with SNAT:

ovs-ofctl add-flow ovsbr0 "ipv6, ipv6_src=2001:5c0:9168::2/64 \
actions=load:0x1->NXM_NX_IPV6_SRC[0..63], \
load:0x20010db801920000->NXM_NX_IPV6_SRC[64..127],output:p7p1"

Replace 'SRC' with DST' above for IPv6 DNAT
Signed-off-by: NSomnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For every single case where bnxt_tc_can_offload() can fail, we are
logging a user friendly descriptive message anyway, but because of the
path it would take in case of failure, another redundant error message
would get logged. Just freeing the node and returning from the point of
failure should suffice.
Signed-off-by: NSomnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support for packet edit offload of L2 fields (src mac &
dst mac, also referred as L2 rewrite). Only when the mask is fully exact
match for a field, the command is sent down to the adapter to offload
such a flow. Otherwise, an error is returned.

v2: Fix pointer alignment issue in bnxt_fill_l2_rewrite_fields() [MChan]
Signed-off-by: NVenkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement a new list of DSA links in the switch fabric itself, to
provide an alterative to the ds->rtable static arrays.

At the same time, provide a new dsa_routing_port() helper to abstract
the usage of ds->rtable in drivers. If there's no port to reach a
given device, return the first invalid port, ds->num_ports. This avoids
potential signedness errors or the need to define special values.
Signed-off-by: NVivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The dpaa2-eth driver now has support for connecting to its associated
PHY device found through standard OF bindings.

This happens when the DPNI object (that the driver probes on) gets
connected to a DPMAC. When that happens, the device tree is looked up by
the DPMAC ID, and the associated PHY bindings are found.

The old logic of handling the net device's link state by hand still
needs to be kept, as the DPNI can be connected to other devices on the
bus than a DPMAC: other DPNI, DPSW ports, etc. This logic is only
engaged when there is no DPMAC (and therefore no phylink instance)
attached.

The MC firmware support multiple type of DPMAC links: TYPE_FIXED,
TYPE_PHY. The TYPE_FIXED mode does not require any DPMAC management from
Linux side, and as such, the driver will not handle such a DPMAC.

Although PHYLINK typically handles SFP cages and in-band AN modes, for
the moment the driver only supports the RGMII interfaces found on the
LX2160A. Support for other modes will come later.
Signed-off-by: NIoana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>