- 23 2月, 2009 11 次提交
-
-
由 Eric Anholt 提交于
The problem was that object_set_to_gpu_domain would set the new write_domains that are getting set by this batchbuffer, then the accumulated flushes required for all the objects in preparation for this batchbuffer were posted, and the brand new write domain would get cleared by the flush being posted. Instead, hang on to the new (or old if we're not changing it) value and set it after the flush is queued. Results from this noticably included conformance test failures from reads shortly after writes (where the new write domain had been lost and thus not flushed and waited on), but is a suspected cause of hangs in some apps when a write domain is lost on a buffer that gets reused for instruction or commmand state. Signed-off-by: NEric Anholt <eric@anholt.net> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Eric Anholt 提交于
While not strictly required, it helped while thinking about the following change. This change should be invariant. Signed-off-by: NEric Anholt <eric@anholt.net> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip由 Linus Torvalds 提交于
* 'core/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: PM: Split up sysdev_[suspend|resume] from device_power_[down|up], fix
-
由 Ingo Molnar 提交于
Impact: module build fix Fix: ERROR: "sysdev_resume" [arch/x86/kernel/apm.ko] undefined! ERROR: "sysdev_suspend" [arch/x86/kernel/apm.ko] undefined! As these APIs are now used by the APM driver, which can be built as a module. Also fix a few extra (and inconsistent) newlines in comment blocks preceding these functions. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Randy Dunlap 提交于
The kernel-api docbook was much larger than any of the others, so processing it took longer and needed some docbook extras in some cases, so split it into kernel-api (infrastructure etc.) and device drivers/device subsystems. This allows these docbooks to be generated in parallel. (This reduced the docbook processing time on my 4-proc system with make -j4 from about 5min:16sec to about 2min:01sec.) The chapters that were moved from kernel-api to device-drivers are: Driver Basics Device drivers infrastructure Parallel Port Devices Message-based devices Sound Devices 16x50 UART Driver Frame Buffer Library Input Subsystem Serial Peripheral Interface (SPI) I2C and SMBus Subsystem Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rafael J. Wysocki 提交于
Move the sysdev_suspend/resume from the callee to the callers, with no real change in semantics, so that we can rework the disabling of interrupts during suspend/hibernation. This is based on an earlier patch from Linus. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Right now nobody cares, but the suspend/resume code will eventually want to suspend device interrupts without suspending the timer, and will depend on this flag to know. The modern x86 timer infrastructure uses the local APIC timers and never shows up as a device interrupt at all, so it isn't affected and doesn't need any of this. Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: remove CONFIG_ACPI_SYSTEM fujitsu-laptop: Use RFKILL support bitmask from firmware x86_64: Fix S3 fail path x86_64: acpi/wakeup_64 cleanup battery: don't assume we are fully charged when not charging or discharging ACPI: EC: Add delay for slow MSI controller
-
由 Mike Murphy 提交于
Fix descriptions of device attributes to be consistent with the actual implementations in include/linux/device.h Signed-off-by: Mike Murphy <mamurph[at]cs.clemson.edu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Murphy 提交于
Fix the presented definition of struct device_attribute to match the actual definition in include/linux/device.h Signed-off-by: Mike Murphy <mamurph[at]cs.clemson.edu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
http://kisskb.ellerman.id.au/kisskb/buildresult/72115/: | net/mac80211/ieee80211_i.h:327: error: syntax error before 'volatile' | net/mac80211/ieee80211_i.h:350: error: syntax error before '}' token | net/mac80211/ieee80211_i.h:455: error: field 'sta' has incomplete type | distcc[19430] ERROR: compile net/mac80211/main.c on sprygo/32 failed This is caused by | # define mfp ((*(volatile struct MFP*)MFP_BAS)) in arch/m68k/include/asm/atarihw.h, which conflicts with the new "mfp" enum in net/mac80211/ieee80211_i.h. Rename "mfp" to "st_mfp", as it's a way too generic name for a global #define. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 2月, 2009 19 次提交
-
-
由 Len Brown 提交于
-
由 Bjorn Helgaas 提交于
Remove CONFIG_ACPI_SYSTEM. It was always set the same as CONFIG_ACPI, and it had no menu label, so there was no way to set it to anything other than "y". Some things under CONFIG_ACPI_SYSTEM (acpi_irq_handled, acpi_os_gpe_count(), event_is_open, register_acpi_notifier(), etc.) are used unconditionally by the CA, the OSPM, and drivers, so we depend on them always being present. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Tony Vroon 提交于
Up until now, we polled the rfkill status for every incoming FUJ02E3 ACPI event. It turns out that the firmware has a bitmask which indicates what rfkill-related state it can report. The rfkill_supported bitmask is now used to avoid polling for rfkill at all in the notification handler if there is no support. Also, it is used in the platform device callbacks. As before we register all callbacks and report "unknown" if the firmware does not give us status updates for that particular bit. This was fed through checkpatch.pl and tested on the S6420, S7020 and P8010 platforms. Signed-off-by: NTony Vroon <tony@linx.net> Tested-by: NStephen Gildea <stepheng+linux@gildea.com> Acked-by: NJonathan Woithe <jwoithe@physics.adelaide.edu.au> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Jiri Slaby 提交于
As acpi_enter_sleep_state can fail, take this into account in do_suspend_lowlevel and don't return to the do_suspend_lowlevel's caller. This would break (currently) fpu status and preempt count. Technically, this means use `call' instead of `jmp' and `jmp' to the `resume_point' after the `call' (i.e. if acpi_enter_sleep_state returns=fails). `resume_point' will handle the restore of fpu and preempt count gracefully. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Jiri Slaby 提交于
- remove %ds re-set, it's already set in wakeup_long64 - remove double labels and alignment (ENTRY already adds both) - use meaningful resume point labelname - skip alignment while jumping from wakeup_long64 to the resume point - remove .size, .type and unused labels [v2] - added ENDPROCs Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Acked-by: NCyrill Gorcunov <gorcunov@openvz.org> Acked-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Linus Torvalds 提交于
* hibernate: PM: Fix suspend_console and resume_console to use only one semaphore PM: Wait for console in resume PM: Fix pm_notifiers during user mode hibernation swsusp: clean up shrink_all_zones() swsusp: dont fiddle with swappiness PM: fix build for CONFIG_PM unset PM/hibernate: fix "swap breaks after hibernation failures" PM/resume: wait for device probing to finish Consolidate driver_probe_done() loops into one place
-
由 Arve Hjønnevåg 提交于
This fixes a race where a thread acquires the console while the console is suspended, and the console is resumed before this thread releases it. In this case, the secondary console semaphore would be left locked, and the primary semaphore would be released twice. This in turn would cause the console switch on suspend or resume to hang forever. Note that suspend_console does not actually lock the console for clients that use acquire_console_sem, it only locks it for clients that use try_acquire_console_sem. If we change suspend_console to fully lock the console, then the kernel may deadlock on suspend. One client of try_acquire_console_sem is acquire_console_semaphore_for_printk, which uses it to prevent printk from using the console while it is suspended. Signed-off-by: NArve Hjønnevåg <arve@android.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Arve Hjønnevåg 提交于
Avoids later waking up to a blinking cursor if the device woke up and returned to sleep before the console switch happened. Signed-off-by: NBrian Swetland <swetland@google.com> Signed-off-by: NArve Hjønnevåg <arve@android.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrey Borzenkov 提交于
Snapshot device is opened with O_RDONLY during suspend and O_WRONLY durig resume. Make sure we also call notifiers with correct parameter telling them what we are really doing. Signed-off-by: NAndrey Borzenkov <arvidjaar@mail.ru> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <gregkh@suse.de> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
Move local variables to innermost possible scopes and use local variables to cache calculations/reads done more than once. No change in functionality (intended). Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <gregkh@suse.de> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
sc.swappiness is not used in the swsusp memory shrinking path, do not set it. Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rafael J. Wysocki 提交于
Compilation of kprobes.c with CONFIG_PM unset is broken due to some broken config dependncies. Fix that. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <gregkh@suse.de> Reported-by: NIngo Molnar <mingo@elte.hu> Tested-by: NMasami Hiramatsu <mhiramat@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Jenkins 提交于
http://bugzilla.kernel.org/show_bug.cgi?id=12239 The image writing code dropped a reference to the current swap device. This doesn't show up if the hibernation succeeds - because it doesn't affect the image which gets resumed. But it means multiple _failed_ hibernations end up freeing the swap device while it is still use! swsusp_write() finds the block device for the swap file using swap_type_of(). It then uses blkdev_get() / blkdev_put() to open and close the block device. Unfortunately, blkdev_get() assumes ownership of the inode of the block_device passed to it. So blkdev_put() calls iput() on the inode. This is by design and other callers expect this behaviour. The fix is for swap_type_of() to take a reference on the inode using bdget(). Signed-off-by: NAlan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Arjan van de Ven 提交于
the resume code does not currently wait for device probing to finish. Even without async function calls this is dicey and not correct, but with async function calls during the boot sequence this is going to get hit more... This patch adds the synchronization using the newly introduced helper. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <lenb@kernel.org> Acked-by: NGreg KH <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Arjan van de Ven 提交于
there's a few places that currently loop over driver_probe_done(), and I'm about to add another one. This patch abstracts it into a helper to reduce duplication. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <lenb@kernel.org> Acked-by: NGreg KH <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Richard Hughes 提交于
On hardware like the T61 it can take a couple of seconds for the battery to start charging after the power is connected, and we incorrectly tell userspace that we are fully charged, and then go back to charging. Only mark a battery as fully charged when the preset charge matches either the last full charge, or the design charge. http://bugzilla.kernel.org/show_bug.cgi?id=12632Signed-off-by: NRichard Hughes <hughsient@gmail.com> Acked-by: NAlexey Starikovskiy <astarikovskiy@suse.de> Acked-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Alexey Starikovskiy 提交于
http://bugzilla.kernel.org/show_bug.cgi?id=12011Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, mce: remove incorrect __cpuinit for mce_cpu_features() MAINTAINERS: paravirt-ops maintainers update
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] Fix multiuser mounts so server does not invalidate earlier security contexts [CIFS] improve posix semantics of file create [CIFS] Fix oops in cifs_strfromUCS_le mounting to servers which do not specify their OS cifs: posix fill in inode needed by posix open cifs: properly handle case where CIFSGetSrvInodeNumber fails cifs: refactor new_inode() calls and inode initialization [CIFS] Prevent OOPs when mounting with remote prefixpath. [CIFS] ipv6_addr_equal for address comparison
-
- 21 2月, 2009 10 次提交
-
-
由 H. Peter Anvin 提交于
Impact: Bug fix on UP Checkin 6ec68bff: x86, mce: reinitialize per cpu features on resume introduced a call to mce_cpu_features() in the resume path, in order for the MCE machinery to get properly reinitialized after a resume. However, this function (and its successors) was flagged __cpuinit, which becomes __init on UP configurations (on SMP suspend/resume requires CPU hotplug and so this would not be seen.) Remove the offending __cpuinit annotations for mce_cpu_features() and its successor functions. Cc: Andi Kleen <ak@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Steve French 提交于
When two different users mount the same Windows 2003 Server share using CIFS, the first session mounted can be invalidated. Some servers invalidate the first smb session when a second similar user (e.g. two users who get mapped by server to "guest") authenticates an smb session from the same client. By making sure that we set the 2nd and subsequent vc numbers to nonzero values, this ensures that we will not have this problem. Fixes Samba bug 6004, problem description follows: How to reproduce: - configure an "open share" (full permissions to Guest user) on Windows 2003 Server (I couldn't reproduce the problem with Samba server or Windows older than 2003) - mount the share twice with different users who will be authenticated as guest. noacl,noperm,user=john,dir_mode=0700,domain=DOMAIN,rw noacl,noperm,user=jeff,dir_mode=0700,domain=DOMAIN,rw Result: - just the mount point mounted last is accessible: Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Steve French 提交于
Samba server added support for a new posix open/create/mkdir operation a year or so ago, and we added support to cifs for mkdir to use it, but had not added the corresponding code to file create. The following patch helps improve the performance of the cifs create path (to Samba and servers which support the cifs posix protocol extensions). Using Connectathon basic test1, with 2000 files, the performance improved about 15%, and also helped reduce network traffic (17% fewer SMBs sent over the wire) due to saving a network round trip for the SetPathInfo on every file create. It should also help the semantics (and probably the performance) of write (e.g. when posix byte range locks are on the file) on file handles opened with posix create, and adds support for a few flags which would have to be ignored otherwise. Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Steve French 提交于
Fixes kernel bug #10451 http://bugzilla.kernel.org/show_bug.cgi?id=10451 Certain NAS appliances do not set the operating system or network operating system fields in the session setup response on the wire. cifs was oopsing on the unexpected zero length response fields (when trying to null terminate a zero length field). This fixes the oops. Acked-by: NJeff Layton <jlayton@redhat.com> CC: stable <stable@kernel.org> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
function needed to prepare for posix open Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
...if it does then we pass a pointer to an unintialized variable for the inode number to cifs_new_inode. Have it pass a NULL pointer instead. Also tweak the function prototypes to reduce the amount of casting. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
Move new inode creation into a separate routine and refactor the callers to take advantage of it. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Igor Mammedov 提交于
Fixes OOPs with message 'kernel BUG at fs/cifs/cifs_dfs_ref.c:274!'. Checks if the prefixpath in an accesible while we are still in cifs_mount and fails with reporting a error if we can't access the prefixpath Should fix Samba bugs 6086 and 5861 and kernel bug 12192 Signed-off-by: NIgor Mammedov <niallain@gmail.com> Acked-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (26 commits) drm/radeon: update sarea copies of last_ variables on resume. drm/i915: Keep refs on the object over the lifetime of vmas for GTT mmap. drm/i915: take struct mutex around fb unref drm: Use spread spectrum when the bios tells us it's ok. drm: Collapse identical i8xx_clock() and i9xx_clock(). drm: Bring PLL limits in sync with DDX values. drm: Add locking around cursor gem operations. drm: Propagate failure from setting crtc base. drm: Check for a NULL encoder when reverting on error path drm/i915: Cleanup the hws on ringbuffer constrution failure. drm/i915: Don't add panel_fixed_mode to the probed modes list at LVDS init. drm: Release user fbs in drm_release drm/i915: Unpin the fb on error during construction. drm/i915: Unpin the hws if we fail to kmap. drm/i915: Unpin the ringbuffer if we fail to ioremap it. drm/i915: unpin for an invalid memory domain. drm/i915: Release and unlock on mmap_gtt error path. drm/i915: Set framebuffer alignment based upon the fence constraints. drm: Do not leak a new reference for flink() on an existing name drm/i915: Fix potential AB-BA deadlock in i915_gem_execbuffer() ...
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: use the right protections for split-up pagetables x86, vmi: TSC going backwards check in vmi clocksource
-