- 20 3月, 2020 2 次提交
-
-
由 Avraham Stern 提交于
Add support for requesting that the ranging measurement will use the trigger-based / non trigger-based flow instead of the EDCA based flow. Signed-off-by: NAvraham Stern <avraham.stern@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-2-luca@coelho.fiSigned-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Markus Theil 提交于
If the nl80211 control port is used before this patch, pre-auth frames (0x88c7) are send to userspace uncoditionally. While this enables userspace to only use nl80211 on the station side, it is not always useful for APs. Furthermore, pre-auth frames are ordinary data frames and not related to the control port. Therefore it should for example be possible for pre-auth frames to be bridged onto a wired network on AP side without touching userspace. For backwards compatibility to code already using pre-auth over nl80211, this patch adds a feature flag to disable this behavior, while it remains enabled by default. An additional ext. feature flag is added to detect this from userspace. Thanks to Jouni for pointing out, that pre-auth frames should be handled as ordinary data frames. Signed-off-by: NMarkus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20200312091055.54257-2-markus.theil@tu-ilmenau.deSigned-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 24 2月, 2020 7 次提交
-
-
由 Tamizh chelvam 提交于
This patch adds support to configure per TID RTSCTS control configuration to enable/disable through the NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL attribute. Signed-off-by: NTamizh chelvam <tamizhr@codeaurora.org> Link: https://lore.kernel.org/r/1579506687-18296-5-git-send-email-tamizhr@codeaurora.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Tamizh chelvam 提交于
This patch adds support to configure per TID AMPDU control configuration to enable/disable aggregation through the NL80211_TID_CONFIG_ATTR_AMPDU_CTRL attribute. Signed-off-by: NTamizh chelvam <tamizhr@codeaurora.org> Link: https://lore.kernel.org/r/1579506687-18296-4-git-send-email-tamizhr@codeaurora.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Tamizh chelvam 提交于
This patch adds support to configure per TID retry configuration through the NL80211_TID_CONFIG_ATTR_RETRY_SHORT and NL80211_TID_CONFIG_ATTR_RETRY_LONG attributes. This TID specific retry configuration will have more precedence than phy level configuration. Signed-off-by: NTamizh chelvam <tamizhr@codeaurora.org> Link: https://lore.kernel.org/r/1579506687-18296-3-git-send-email-tamizhr@codeaurora.org [rebase completely on top of my previous API changes] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
Make some changes to the TID-config API: * use u16 in nl80211 (only, and restrict to using 8 bits for now), to avoid issues in the future if we ever want to use higher TIDs. * reject empty TIDs mask (via netlink policy) * change feature advertising to not use extended feature flags but have own mechanism for this, which simplifies the code * fix all variable names from 'tid' to 'tids' since it's a mask * change to cfg80211_ name prefixes, not ieee80211_ * fix some minor docs/spelling things. Change-Id: Ia234d464b3f914cdeab82f540e018855be580dce Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Tamizh chelvam 提交于
Add the new NL80211_CMD_SET_TID_CONFIG command to support data TID specific configuration. Per TID configuration is passed in the nested NL80211_ATTR_TID_CONFIG attribute. This patch adds support to configure per TID noack policy through the NL80211_TID_CONFIG_ATTR_NOACK attribute. Signed-off-by: NTamizh chelvam <tamizhr@codeaurora.org> Link: https://lore.kernel.org/r/1579506687-18296-2-git-send-email-tamizhr@codeaurora.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Jouni Malinen 提交于
IEEE P802.11-REVmd/D3.0 adds support for protecting Beacon frames using a new set of keys (BIGTK; key index 6..7) similarly to the way group-addressed Robust Management frames are protected (IGTK; key index 4..5). Extend cfg80211 and nl80211 to allow the new BIGTK to be configured. Add an extended feature flag to indicate driver support for the new key index values to avoid array overflows in driver implementations and also to indicate to user space when this functionality is available. Signed-off-by: NJouni Malinen <jouni@codeaurora.org> Link: https://lore.kernel.org/r/20200222132548.20835-2-jouni@codeaurora.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
This reverts commit 8c3ed7aa. As Jouni points out, there's really no need for this, since the RSN pre-authentication frames are normal data frames, not port control frames (locally). We can still revert this now since it hasn't actually gone beyond -next. Fixes: 8c3ed7aa ("nl80211: add src and dst addr attributes for control port tx/rx") Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200224101910.b746e263287a.I9eb15d6895515179d50964dec3550c9dc784bb93@changeidSigned-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 07 2月, 2020 3 次提交
-
-
由 Markus Theil 提交于
When using control port over nl80211 in AP mode with pre-authentication, APs need to forward frames to other APs defined by their MAC address. Before this patch, pre-auth frames reaching user space over nl80211 control port have no longer any information about the dest attached, which can be used for forwarding to a controller or injecting the frame back to a ethernet interface over a AF_PACKET socket. Analog problems exist, when forwarding pre-auth frames from AP -> STA. This patch therefore adds the NL80211_ATTR_DST_MAC and NL80211_ATTR_SRC_MAC attributes to provide more context information when forwarding. The respective arguments are optional on tx and included on rx. Therefore unaware existing software is not affected. Software which wants to detect this feature, can do so by checking against: NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_MAC_ADDRS Signed-off-by: NMarkus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20200115125522.3755-1-markus.theil@tu-ilmenau.de [split into separate cfg80211/mac80211 patches] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Veerendranath Jakkam 提交于
Commit ab4dfa20 ("cfg80211: Allow drivers to advertise supported AKM suites") introduces the support to advertize supported AKMs to userspace. This needs an enhancement to advertize the AKM support per interface type, specifically for the cfg80211-based drivers that implement SME and use different mechanisms to support the AKM's for each interface type (e.g., the support for SAE, OWE AKM's take different paths for such drivers on STA/AP mode). This commit aims the same and enhances the earlier mechanism of advertizing the AKMs per wiphy. Add new nl80211 attributes and data structure to provide supported AKMs per interface type to userspace. the AKMs advertized in akm_suites are default capabilities if not advertized for a specific interface type in iftype_akm_suites. Signed-off-by: NVeerendranath Jakkam <vjakkam@codeaurora.org> Link: https://lore.kernel.org/r/20200126203032.21934-1-vjakkam@codeaurora.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Haim Dreyfuss 提交于
The regulatory domain might forbid HE operation. Certain regulatory domains may restrict it for specific channels whereas others may do it for the whole regulatory domain. Add an option to indicate it in the channel flag. Signed-off-by: NHaim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200121081213.733757-1-luca@coelho.fiSigned-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 15 1月, 2020 1 次提交
-
-
由 John Crispin 提交于
This patch adds the attributes, policy and parsing code to allow userland to send the info about the BSS coloring settings to the kernel. Signed-off-by: NJohn Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20191217141921.8114-1-john@phrozen.org [johannes: remove the strict policy parsing, that was a misunderstanding] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 13 12月, 2019 1 次提交
-
-
由 Toke Høiland-Jørgensen 提交于
Instead of just having an airtime flag in debugfs, turn AQL into a proper NL80211_EXT_FEATURE, so drivers can turn it on when they are ready, and so we also expose the presence of the feature to userspace. This also has the effect of flipping the default, so drivers have to opt in to using AQL instead of getting it by default with TXQs. To keep functionality the same as pre-patch, we set this feature for ath10k (which is where it is needed the most). While we're at it, split out the debugfs interface so AQL gets its own per-station debugfs file instead of using the 'airtime' file. [Johannes:] This effectively disables AQL for iwlwifi, where it fixes a number of issues: * TSO in iwlwifi is causing underflows and associated warnings in AQL * HE (802.11ax) rates aren't reported properly so at HE rates, AQL could never have a valid estimate (it'd use 6 Mbps instead of up to 2400!) Signed-off-by: NToke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20191212111437.224294-1-toke@redhat.com Fixes: 3ace10f5 ("mac80211: Implement Airtime-based Queue Limit (AQL)") Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 08 11月, 2019 1 次提交
-
-
This provides an alternative mechanism for AP VLAN support where a single netdev is used with VLAN tagged frames instead of separate netdevs for each VLAN without tagged frames from the WLAN driver. By setting NL80211_EXT_FEATURE_VLAN_OFFLOAD flag the driver indicates support for a single netdev with VLAN tagged frames. Separate VLAN-specific netdevs can be added using RTM_NEWLINK/IFLA_VLAN_ID similarly to Ethernet. NL80211_CMD_NEW_KEY (for group keys), NL80211_CMD_NEW_STATION, and NL80211_CMD_SET_STATION will optionally specify vlan_id using NL80211_ATTR_VLAN_ID. Signed-off-by: NGurumoorthi Gnanasambandhan <gguru@codeaurora.org> Signed-off-by: NJouni Malinen <jouni@codeaurora.org> Link: https://lore.kernel.org/r/20191031214640.5012-1-jouni@codeaurora.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 04 10月, 2019 1 次提交
-
-
由 Sunil Dutt 提交于
This commit documents the expectation for NL80211_ATTR_IE when included in NL80211_CMD_CONNECT, as following. Driver shall not modify the IEs specified through NL80211_ATTR_IE if NL80211_ATTR_MAC is included. However, if NL80211_ATTR_MAC_HINT is included, these IEs through NL80211_ATTR_IE are specified by the user space based on the best possible BSS selected. Thus, if the driver ends up selecting a different BSS, it can modify these IEs accordingly (e.g. userspace asks the driver to perform PMKSA caching with BSS1 and the driver ends up selecting BSS2 with different PMKSA cache entry. RSNIE has to get updated with the apt PMKID). Signed-off-by: NSunil Dutt <usdutt@codeaurora.org> Link: https://lore.kernel.org/r/1568378504-15179-1-git-send-email-usdutt@codeaurora.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 30 8月, 2019 1 次提交
-
-
由 Felix Fietkau 提交于
This is useful for checking how much airtime is being used up by other transmissions on the channel, e.g. by calculating (time_rx - time_bss_rx) or (time_busy - time_bss_rx - time_tx) Signed-off-by: NFelix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20190828102042.58016-1-nbd@nbd.nameSigned-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 21 8月, 2019 3 次提交
-
-
由 Alexei Avshalom Lazar 提交于
802.11ay specification defines Enhanced Directional Multi-Gigabit (EDMG) STA and AP which allow channel bonding of 2 channels and more. Introduce new NL attributes that are needed for enabling and configuring EDMG support. Two new attributes are used by kernel to publish driver's EDMG capabilities to the userspace: NL80211_BAND_ATTR_EDMG_CHANNELS - bitmap field that indicates the 2.16 GHz channel(s) that are supported by the driver. When this attribute is not set it means driver does not support EDMG. NL80211_BAND_ATTR_EDMG_BW_CONFIG - represent the channel bandwidth configurations supported by the driver. Additional two new attributes are used by the userspace for connect command and for AP configuration: NL80211_ATTR_WIPHY_EDMG_CHANNELS NL80211_ATTR_WIPHY_EDMG_BW_CONFIG New rate info flag - RATE_INFO_FLAGS_EDMG, can be reported from driver and used for bitrate calculation that will take into account EDMG according to the 802.11ay specification. Signed-off-by: NAlexei Avshalom Lazar <ailizaro@codeaurora.org> Link: https://lore.kernel.org/r/1566138918-3823-2-git-send-email-ailizaro@codeaurora.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Ben Greear 提交于
Report timestamp of when sta became associated. This is the boottime clock, units are nano-seconds. Signed-off-by: NBen Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20190809180001.26393-1-greearb@candelatech.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Arend van Spriel 提交于
In the 802.11ax specification a new band is introduced, which is also proposed by FCC for unlicensed use. This band is referred to as 6GHz spanning frequency range from 5925 to 7125 MHz. Reviewed-by: NPieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: NLeon Zegers <leon.zegers@broadcom.com> Signed-off-by: NArend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-2-git-send-email-arend.vanspriel@broadcom.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 31 7月, 2019 1 次提交
-
-
由 John Crispin 提交于
Add the data structure, policy and parsing code allowing userland to send the OBSS PD information into the kernel. Signed-off-by: NJohn Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20190730163701.18836-2-john@phrozen.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 26 7月, 2019 1 次提交
-
-
由 Denis Kenzior 提交于
Commit 1c38c7f2 ("nl80211: send event when CMD_FRAME duration expires") added the possibility of NL80211_CMD_FRAME_WAIT_CANCEL being sent whenever the off-channel wait time associated with a CMD_FRAME completes. Document this in the uapi/linux/nl80211.h file. Signed-off-by: NDenis Kenzior <denkenz@gmail.com> Link: https://lore.kernel.org/r/20190722113312.14031-1-denkenz@gmail.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 21 7月, 2019 1 次提交
-
-
由 John Crispin 提交于
NL80211_HE_MAX_CAPABILITY_LEN has changed between D2.0 and D4.0. It is now MAC (6) + PHY (11) + MCS (12) + PPE (25) = 54. Signed-off-by: NJohn Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20190627095832.19445-1-john@phrozen.orgSigned-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 28 6月, 2019 1 次提交
-
-
由 Jiunn Chang 提交于
Shifting signed 32-bit value by 31 bits is undefined. Changing most significant bit to unsigned. Signed-off-by: NJiunn Chang <c0d1n61at3@gmail.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 14 6月, 2019 3 次提交
-
-
由 John Crispin 提交于
Allow the userland daemon to en/disable TWT support for an AP. Signed-off-by: NShashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: NJohn Crispin <john@phrozen.org> [simplify parsing code] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Chung-Hsien Hsu 提交于
Let drivers advertise support for station-mode SAE authentication offload with a new NL80211_EXT_FEATURE_SAE_OFFLOAD flag. Signed-off-by: NChung-Hsien Hsu <stanley.hsu@cypress.com> Signed-off-by: NChi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Chung-Hsien Hsu 提交于
Add definition of WPA version 3 for SAE authentication. Signed-off-by: NChung-Hsien Hsu <stanley.hsu@cypress.com> Signed-off-by: NChi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 26 4月, 2019 4 次提交
-
-
由 Rajkumar Manoharan 提交于
Adding support to allow mesh HWMP to measure link metrics on unexercised direct mesh path by sending some data frames to other mesh points which are not currently selected as a primary traffic path but only 1 hop away. The absence of the primary path to the chosen node makes it necessary to apply some form of marking on a chosen packet stream so that the packets can be properly steered to the selected node for testing, and not by the regular mesh path lookup. Tested-by: NPradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: NRajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Ashok Raj Nagarajan 提交于
This patch adds support to set transmit power setting type and transmit power level attributes to NL80211_CMD_SET_STATION in order to facilitate adjusting the transmit power level of a station associated to the AP. The added attributes allow selection of automatic and limited transmit power level, with the level defined in dBm format. Co-developed-by: NBalaji Pothunoori <bpothuno@codeaurora.org> Signed-off-by: NAshok Raj Nagarajan <arnagara@codeaurora.org> Signed-off-by: NBalaji Pothunoori <bpothuno@codeaurora.org> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Alexander Wetzel 提交于
Add support for IEEE 802.11-2016 "Extended Key ID for Individually Addressed Frames". Extend cfg80211 and nl80211 to allow pairwise keys to be installed for Rx only, enable Tx separately and allow Key ID 1 for pairwise keys. Signed-off-by: NAlexander Wetzel <alexander@wetzel-home.de> [use NLA_POLICY_RANGE() for NL80211_KEY_MODE] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Shaul Triebitz 提交于
The iwlwifi driver creates one rule per channel, thus it needs more rules than normal. To solve this, increase NL80211_MAX_SUPP_REG_RULES so iwlwifi can also fit UHB (ultra high band) channels. Signed-off-by: NShaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 08 4月, 2019 3 次提交
-
-
由 Sunil Dutt 提交于
This interface allows the host driver to offload OWE processing to user space. This intends to support OWE (Opportunistic Wireless Encryption) AKM by the drivers that implement SME but rely on the user space for the cryptographic/OWE processing in AP mode. Such drivers are not capable of processing/deriving the DH IE. A new NL80211 command - NL80211_CMD_UPDATE_OWE_INFO is introduced to send the request/event between the host driver and user space. Driver shall provide the OWE info (MAC address and DH IE) of the peer to user space for cryptographic processing of the DH IE through the event. Accordingly, the user space shall update the OWE info/DH IE to the driver. Following is the sequence in AP mode for OWE authentication. Driver passes the OWE info obtained from the peer in the Association Request to the user space through the event cfg80211_update_owe_info_event. User space shall process the OWE info received and generate new OWE info. This OWE info is passed to the driver through NL80211_CMD_UPDATE_OWE_INFO request. Driver eventually uses this OWE info to send the Association Response to the peer. This OWE info in the command interface carries the IEs that include PMKID of the peer if the PMKSA is still valid or an updated DH IE for generating a new PMKSA with the peer. Signed-off-by: NLiangwei Dong <liangwei@codeaurora.org> Signed-off-by: NSunil Dutt <usdutt@codeaurora.org> Signed-off-by: NSrinivas Dasari <dasaris@codeaurora.org> [remove policy initialization - no longer exists] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Narayanraddi Masti 提交于
Add support for mesh airtime link metric attribute NL80211_STA_INFO_AIRTIME_LINK_METRIC. Signed-off-by: NNarayanraddi Masti <team.nmasti@gmail.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 vamsi krishna 提交于
This commit adds the support to specify the RSSI thresholds per band for each match set. This enhances the current behavior which specifies a single rssi_threshold across all the bands by introducing the rssi_threshold_per_band. These per band rssi thresholds are referred through NL80211_BAND_* (enum nl80211_band) variables as attribute types. Such attributes/values per each band are nested through NL80211_ATTR_SCHED_SCAN_MIN_RSSI. These band specific rssi thresholds shall take precedence over the current rssi_thold per match set. Drivers indicate this support through %NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD. These per band rssi attributes/values does not specify "default RSSI filter" as done by NL80211_SCHED_SCAN_MATCH_ATTR_RSSI to stay backward compatible. That said, these per band rssi values have to be specified for the corresponding matchset. Signed-off-by: Nvamsi krishna <vamsin@codeaurora.org> Signed-off-by: NSrinivas Dasari <dasaris@codeaurora.org> [rebase on refactoring, add policy] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 26 1月, 2019 2 次提交
-
-
由 Liangwei Dong 提交于
Host drivers may offload authentication to the user space through the commit ("cfg80211: Authentication offload to user space in AP mode"). This interface can be used to implement SAE by having the userspace do authentication/PMKID key derivation and driver handle the association. A step ahead, this interface can get further optimized if the PMKID is passed to the host driver and also have it respond to the association request by the STA on a valid PMKID. This commit enables the userspace to pass the PMKID to the host drivers through the set/del pmksa operations in AP mode. Set/Del pmksa is now restricted to STA/P2P client mode only and thus the drivers might not expect them in any other(AP) mode. This commit also introduces a feature flag NL80211_EXT_FEATURE_AP_PMKSA_CACHING (johannes: renamed) to maintain the backward compatibility of such an expectation by the host drivers. These operations are allowed in AP mode only when the drivers advertize the capability through this flag. Signed-off-by: NLiangwei Dong <liangwei@codeaurora.org> Signed-off-by: NSrinivas Dasari <dasaris@codeaurora.org> [rename flag to NL80211_EXT_FEATURE_AP_PMKSA_CACHING] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Srinivas Dasari 提交于
commit 40cbfa90 ("cfg80211/nl80211: Optional authentication offload to userspace")' introduced authentication offload to user space by the host drivers in station mode. This commit extends the same for the AP mode too. Extend NL80211_ATTR_EXTERNAL_AUTH_SUPPORT to also claim the support of external authentication from the user space in AP mode. A new flag parameter is introduced in cfg80211_ap_settings to intend the same while "start ap". Host driver to use NL80211_CMD_FRAME interface to transmit and receive the authentication frames to / from the user space. Host driver to indicate the flag NL80211_RXMGMT_FLAG_EXTERNAL_AUTH while sending the authentication frame to the user space. This intends to the user space that the driver wishes it to process the authentication frame for certain protocols, though it had initially advertised the support for SME functionality. User space shall accordingly do the authentication and indicate its final status through the command NL80211_CMD_EXTERNAL_AUTH. Allow the command even if userspace doesn't include the attribute NL80211_ATTR_SSID for AP interface. Host driver shall continue with the association sequence and indicate the STA connection status through cfg80211_new_sta. To facilitate the host drivers in AP mode for matching the pmkid by the stations during the association, NL80211_CMD_EXTERNAL_AUTH is also enhanced to include the pmkid to drivers after the authentication. This pmkid can also be used in the STA mode to include in the association request. Also modify nl80211_external_auth to not mandate SSID in AP mode. Signed-off-by: NSrinivas Dasari <dasaris@codeaurora.org> [remove useless nla_get_flag() usage] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 25 1月, 2019 1 次提交
-
-
由 Veerendranath Jakkam 提交于
There was no such capability advertisement from the driver and thus the current user space has to assume the driver to support all the AKMs. While that may be the case with some drivers (e.g., mac80211-based ones), there are cfg80211-based drivers that implement SME and have constraints on which AKMs can be supported (e.g., such drivers may need an update to support SAE AKM using NL80211_CMD_EXTERNAL_AUTH). Allow such drivers to advertise the exact set of supported AKMs so that user space tools can determine what network profile options should be allowed to be configured. Signed-off-by: NVeerendranath Jakkam <vjakkam@codeaurora.org> [pmsr data might be big, start a new netlink message section] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 19 1月, 2019 3 次提交
-
-
由 Julan Hsu 提交于
Expose path change count to destination in mpath info Signed-off-by: NJulan Hsu <julanhsu@google.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Julan Hsu 提交于
Expose hop count to destination information in mpath info Signed-off-by: NJulan Hsu <julanhsu@google.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Toke Høiland-Jørgensen 提交于
This adds TX airtime statistics to the cfg80211 station dump (to go along with the RX info already present), and adds a new parameter to set the airtime weight of each station. The latter allows userspace to implement policies for different stations by varying their weights. Signed-off-by: NToke Høiland-Jørgensen <toke@toke.dk> [rmanohar@codeaurora.org: fixed checkpatch warnings] Signed-off-by: NRajkumar Manoharan <rmanohar@codeaurora.org> [move airtime weight != 0 check into policy] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-