Prevent enclosure resets.
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.tell@microsemi.com>
Reviewed-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Use the return from TUR as a check for the device state.
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.tell@microsemi.com>
Reviewed-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

external shelves do not support BMICs.
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Reviewed-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

- align with latest spec.
- added __attribute((aligned(512)))
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Update the driver version to 50834
Signed-off-by: NRaghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: NDavid Carroll <david.carroll@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Remove reference to Series-9 HBA and created arc ctrl check function.
Signed-off-by: NPrasad B Munirathnam <prasad.munirathnam@microsemi.com>
Signed-off-by: NRaghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: NDavid Carroll <david.carroll@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Added info and error messages in controller reset function to log
information about the status of the IOP/SOFT reset.
Signed-off-by: NRaghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: NDavid Carroll <david.carroll@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Make sure that IOP and SOFT reset are enabled for both for both arc and
hba1000 controllers.
Signed-off-by: NRaghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: NDavid Carroll <david.carroll@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Made sure that ioctl commands return in case of a controller reset.
Signed-off-by: NRaghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: NDave Carroll <david.carroll@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The command thread checks the ctrl health periodically before sending
updates to the controller. The function that it uses is aac_check_health
which does more than get the health status.
Signed-off-by: NRaghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: NDavid Carroll <david.carroll@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Removed switch case and replaced with if mask checks. Moved KERNEL_PANIC
check to when bled is less than 0.
Signed-off-by: NRaghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: NDavid Carroll <david.carroll@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Now the driver issues a soft reset and waits for the controller to be up
and running by periodically checking on the status of the controller
health registers. Also prevents ARC adapters from issuing soft reset if
IOP resets failed.
Signed-off-by: NRaghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: NDavid Carroll <david.carroll@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Added function that waits with a timeout for the ctrl to be up and running
after triggering an IOP reset. Also removed 30 sec sleep as it is not
needed.
Signed-off-by: NRaghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: NDavid Carroll <david.carroll@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Reworked IOP reset to remove unneeded variable and created a helper
function to notify fw of an imminent IOP reset.
Signed-off-by: NRaghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: NDavid Carroll <david.carroll@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The driver can now trigger IOP reset with a single reset mask. Removed
code that retrieves a reset_mask from the firmware.
Signed-off-by: NRaghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: NDavid Carroll <david.carroll@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Log the status of the controller before issuing a reset.
Signed-off-by: NRaghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: NDavid Carroll <david.carroll@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Log the location of the scsi cmds before triggering a reset. This
information is useful for debugging.
Signed-off-by: NRaghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: NDavid Carroll <david.carroll@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Change the completion wait time for the fibs in the reset and abort
callback from 2 minutes to 15 seconds.

2 minutes is too long for waiting for completion.
Signed-off-by: NRaghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: NDavid Carroll <david.carroll@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Check health does not need to reset the ctrl but just return the
controller health status.
Signed-off-by: NRaghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: NDavid Carroll <david.carroll@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The default queue depth for non NATIVE RAW disks is calculated from the
number of fibs and number of disks or a max of 256. This causes poor disk
IO performance.

The fix is to set default qd based on the type of disks
(SATA -32 and SAS -64)
Signed-off-by: NRaghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: NDavid Carroll <david.carroll@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The qd for ARC Native disks is calculated by dividing the max IO 1024
by the number of disks or 256 which ever is lower. This causes poor
disk IO performance.

The fix is set the qd based on the type of disk (SAS - 64 and SATA -
32).
Signed-off-by: NRaghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: NDavid Carroll <david.carroll@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The driver changed the DMA consistent map after consistent memory was
allocated, this invalidated the IOMMU identity mapping. The fix was to
make sure that we set the DMA consistent mask setting once depending on
the controller card.
Signed-off-by: NRaghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: NDave Carroll <david.carroll@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The raw srb commands do not requires memory that in the ZONE_DMA memory
space. For 32bit srb commands use GFP_DMA32 to limit the memory to 32bit
memory range (4GB).
Signed-off-by: NRaghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: NDave Carroll <david.carroll@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Pull key subsystem fixes from James Morris:
 "Here are a bunch of fixes for Linux keyrings, including:

   - Fix up the refcount handling now that key structs use the
     refcount_t type and the refcount_t ops don't allow a 0->1
     transition.

   - Fix a potential NULL deref after error in x509_cert_parse().

   - Don't put data for the crypto algorithms to use on the stack.

   - Fix the handling of a null payload being passed to add_key().

   - Fix incorrect cleanup an uninitialised key_preparsed_payload in
     key_update().

   - Explicit sanitisation of potentially secure data before freeing.

   - Fixes for the Diffie-Helman code"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (23 commits)
  KEYS: fix refcount_inc() on zero
  KEYS: Convert KEYCTL_DH_COMPUTE to use the crypto KPP API
  crypto : asymmetric_keys : verify_pefile:zero memory content before freeing
  KEYS: DH: add __user annotations to keyctl_kdf_params
  KEYS: DH: ensure the KDF counter is properly aligned
  KEYS: DH: don't feed uninitialized "otherinfo" into KDF
  KEYS: DH: forbid using digest_null as the KDF hash
  KEYS: sanitize key structs before freeing
  KEYS: trusted: sanitize all key material
  KEYS: encrypted: sanitize all key material
  KEYS: user_defined: sanitize key payloads
  KEYS: sanitize add_key() and keyctl() key payloads
  KEYS: fix freeing uninitialized memory in key_update()
  KEYS: fix dereferencing NULL payload with nonzero length
  KEYS: encrypted: use constant-time HMAC comparison
  KEYS: encrypted: fix race causing incorrect HMAC calculations
  KEYS: encrypted: fix buffer overread in valid_master_desc()
  KEYS: encrypted: avoid encrypting/decrypting stack buffers
  KEYS: put keyring if install_session_keyring_to_cred() fails
  KEYS: Delete an error message for a failed memory allocation in get_derived_key()
  ...

Commit abb2ea7d ("compiler, clang: suppress warning for unused
static inline functions") just caused more warnings due to re-defining
the 'inline' macro.

So undef it before re-defining it, and also add the 'notrace' attribute
like the gcc version that this is overriding does.

Maybe this makes clang happier.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull randomness fixes from Ted Ts'o:
 "Improve performance by using a lockless update mechanism suggested by
  Linus, and make sure we refresh per-CPU entropy returned get_random_*
  as soon as the CRNG is initialized"

* tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  random: invalidate batched entropy after crng init
  random: use lockless method of accessing and updating f->reg_idx

Pull ext4 fixes from Ted Ts'o:
 "Fix various bug fixes in ext4 caused by races and memory allocation
  failures"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix fdatasync(2) after extent manipulation operations
  ext4: fix data corruption for mmap writes
  ext4: fix data corruption with EXT4_GET_BLOCKS_ZERO
  ext4: fix quota charging for shared xattr blocks
  ext4: remove redundant check for encrypted file on dio write path
  ext4: remove unused d_name argument from ext4_search_dir() et al.
  ext4: fix off-by-one error when writing back pages before dio read
  ext4: fix off-by-one on max nr_pages in ext4_find_unwritten_pgoff()
  ext4: keep existing extra fields when inode expands
  ext4: handle the rest of ext4_mb_load_buddy() ENOMEM errors
  ext4: fix off-by-in in loop termination in ext4_find_unwritten_pgoff()
  ext4: fix SEEK_HOLE
  jbd2: preserve original nofs flag during journal restart
  ext4: clear lockdep subtype for quota files on quota off

Pull GPIO fixes from Linus Walleij:
 "A few overdue GPIO patches for the v4.12 kernel.

   - Fix debounce logic on the Aspeed platform.

   - Fix the "virtual gpio" things on the Intel Crystal Cove.

   - Fix the blink counter selection on the MVEBU platform"

* tag 'gpio-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: mvebu: fix gpio bank registration when pwm is used
  gpio: mvebu: fix blink counter register selection
  MAINTAINERS: remove self from GPIO maintainers
  gpio: crystalcove: Do not write regular gpio registers for virtual GPIOs
  gpio: aspeed: Don't attempt to debounce if disabled

Pull char/misc driver fixes from Greg KH:
 "Here are some small driver fixes for 4.12-rc5. Nothing major here,
  just some small bugfixes found by people testing, and a MAINTAINERS
  file update for the genwqe driver.

  All have been in linux-next with no reported issues"

[ The cxl driver fix came in through the powerpc tree earlier ]

* tag 'char-misc-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  cxl: Avoid double free_irq() for psl,slice interrupts
  mei: make sysfs modalias format similar as uevent modalias
  drivers: char: mem: Fix wraparound check to allow mappings up to the end
  MAINTAINERS: Change maintainer of genwqe driver
  goldfish_pipe: use GFP_ATOMIC under spin lock
  firmware: vpd: do not leak kobjects
  firmware: vpd: avoid potential use-after-free when destroying section
  firmware: vpd: do not leave freed section attributes to the list

Pull staging/IIO fixes from Greg KH:
 "These are mostly all IIO driver fixes, resolving a number of tiny
  issues. There's also a ccree and lustre fix in here as well, both fix
  problems found in those codebases.

  All have been in linux-next with no reported issues"

* tag 'staging-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: ccree: fix buffer copy
  staging/lustre/lov: remove set_fs() call from lov_getstripe()
  staging: ccree: add CRYPTO dependency
  iio: adc: sun4i-gpadc-iio: fix parent device being used in devm function
  iio: light: ltr501 Fix interchanged als/ps register field
  iio: adc: bcm_iproc_adc: swap primary and secondary isr handler's
  iio: trigger: fix NULL pointer dereference in iio_trigger_write_current()
  iio: adc: max9611: Fix attribute measure unit
  iio: adc: ti_am335x_adc: allocating too much in probe
  iio: adc: sun4i-gpadc-iio: Fix module autoload when OF devices are registered
  iio: adc: sun4i-gpadc-iio: Fix module autoload when PLATFORM devices are registered
  iio: proximity: as3935: fix iio_trigger_poll issue
  iio: proximity: as3935: fix AS3935_INT mask
  iio: adc: Max9611: checking for ERR_PTR instead of NULL in probe
  iio: proximity: as3935: recalibrate RCO after resume

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 4.12-rc5

  They are for some reported issues in the chipidea and gadget drivers.
  Nothing major. All have been in linux-next for a while with no
  reported issues"

* tag 'usb-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: udc: renesas_usb3: Fix PN_INT_ENA disabling timing
  usb: gadget: udc: renesas_usb3: lock for PN_ registers access
  usb: gadget: udc: renesas_usb3: fix deadlock by spinlock
  usb: gadget: udc: renesas_usb3: fix pm_runtime functions calling
  usb: gadget: f_mass_storage: Serialize wake and sleep execution
  usb: dwc2: add support for the DWC2 controller on Meson8 SoCs
  phy: qualcomm: phy-qcom-qmp: fix application of sizeof to pointer
  usb: musb: dsps: keep VBUS on for host-only mode
  usb: chipidea: core: check before accessing ci_role in ci_role_show
  usb: chipidea: debug: check before accessing ci_role
  phy: qcom-qmp: fix return value check in qcom_qmp_phy_create()
  usb: chipidea: udc: fix NULL pointer dereference if udc_start failed
  usb: chipidea: imx: Do not access CLKONOFF on i.MX51

Pull SCSI fixes from James Bottomley:
 "This is a set of user visible fixes (excepting one format string
  change).

  Four of the qla2xxx fixes only affect the firmware dump path, but it's
  still important to the enterprise. The rest are various NULL pointer
  crash conditions or outright driver hangs"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: cxgb4i: libcxgbi: in error case RST tcp conn
  scsi: scsi_debug: Avoid PI being disabled when TPGS is enabled
  scsi: qla2xxx: Fix extraneous ref on sp's after adapter break
  scsi: lpfc: prevent potential null pointer dereference
  scsi: lpfc: Avoid NULL pointer dereference in lpfc_els_abort()
  scsi: lpfc: nvmet_fc: fix format string
  scsi: qla2xxx: Fix crash due to NULL pointer dereference of ctx
  scsi: qla2xxx: Fix mailbox pointer error in fwdump capture
  scsi: qla2xxx: Set bit 15 for DIAG_ECHO_TEST MBC
  scsi: qla2xxx: Modify T262 FW dump template to specify same start/end to debug customer issues
  scsi: qla2xxx: Fix crash due to mismatch mumber of Q-pair creation for Multi queue
  scsi: qla2xxx: Fix NULL pointer access due to redundant fc_host_port_name call
  scsi: qla2xxx: Fix recursive loop during target mode configuration for ISP25XX leaving system unresponsive
  scsi: bnx2fc: fix race condition in bnx2fc_get_host_stats()
  scsi: qla2xxx: don't disable a not previously enabled PCI device

Pull libnvdimm fix from Dan Williams:
 "We expanded the device-dax fs type in 4.12 to be a generic provider of
  a struct dax_device with an embedded inode. However, Sasha found some
  basic negative testing was not run to verify that this fs cleanly
  handles being mounted directly.

  Note that the fresh rebase was done to remove an unnecessary Cc:
  <stable> tag, but this commit otherwise had a build success
  notification from the 0day robot."

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  device-dax: fix 'dax' device filesystem inode destruction crash

Merge tag 'hexagon-for-linus-v4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hexagon fix from Guenter Roeck:
 "This fixes a build error seen when building hexagon images.

  Richard sent me an Ack, but didn't reply when asked if he wants me to
  send the patch to you directly, so I figured I'd just do it"

* tag 'hexagon-for-linus-v4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hexagon: Use raw_copy_to_user

Pull KVM fixes from Paolo Bonzini:
 "Bug fixes (ARM, s390, x86)"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: async_pf: avoid async pf injection when in guest mode
  KVM: cpuid: Fix read/write out-of-bounds vulnerability in cpuid emulation
  arm: KVM: Allow unaligned accesses at HYP
  arm64: KVM: Allow unaligned accesses at EL2
  arm64: KVM: Preserve RES1 bits in SCTLR_EL2
  KVM: arm/arm64: Handle possible NULL stage2 pud when ageing pages
  KVM: nVMX: Fix exception injection
  kvm: async_pf: fix rcu_irq_enter() with irqs enabled
  KVM: arm/arm64: vgic-v3: Fix nr_pre_bits bitfield extraction
  KVM: s390: fix ais handling vs cpu model
  KVM: arm/arm64: Fix isues with GICv2 on GICv3 migration

 INFO: task gnome-terminal-:1734 blocked for more than 120 seconds.
       Not tainted 4.12.0-rc4+ #8
 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
 gnome-terminal- D    0  1734   1015 0x00000000
 Call Trace:
  __schedule+0x3cd/0xb30
  schedule+0x40/0x90
  kvm_async_pf_task_wait+0x1cc/0x270
  ? __vfs_read+0x37/0x150
  ? prepare_to_swait+0x22/0x70
  do_async_page_fault+0x77/0xb0
  ? do_async_page_fault+0x77/0xb0
  async_page_fault+0x28/0x30

This is triggered by running both win7 and win2016 on L1 KVM simultaneously,
and then gives stress to memory on L1, I can observed this hang on L1 when
at least ~70% swap area is occupied on L0.

This is due to async pf was injected to L2 which should be injected to L1,
L2 guest starts receiving pagefault w/ bogus %cr2(apf token from the host
actually), and L1 guest starts accumulating tasks stuck in D state in
kvm_async_pf_task_wait() since missing PAGE_READY async_pfs.

This patch fixes the hang by doing async pf when executing L1 guest.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit ac4691fa ("hexagon: switch to RAW_COPY_USER") replaced
__copy_to_user_hexagon() with raw_copy_to_user(), but did not catch
all callers, resulting in the following build error.

arch/hexagon/mm/uaccess.c: In function '__clear_user_hexagon':
arch/hexagon/mm/uaccess.c:40:3: error:
	implicit declaration of function '__copy_to_user_hexagon'

Fixes: ac4691fa ("hexagon: switch to RAW_COPY_USER")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NRichard Kuo <rkuo@codeaurora.org>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

Pull UFS fixes from Al Viro:
 "This is just the obvious backport fodder; I'm pretty sure that there
  will be more - definitely so wrt performance and quite possibly
  correctness as well"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ufs: we need to sync inode before freeing it
  excessive checks in ufs_write_failed() and ufs_evict_inode()
  ufs_getfrag_block(): we only grab ->truncate_mutex on block creation path
  ufs_extend_tail(): fix the braino in calling conventions of ufs_new_fragments()
  ufs: set correct ->s_maxsize
  ufs: restore maintaining ->i_blocks
  fix ufs_isblockset()
  ufs: restore proper tail allocation

Pull btrfs fixes from Chris Mason:
 "Some fixes that Dave Sterba collected.

  We've been hitting an early enospc problem on production machines that
  Omar tracked down to an old int->u64 mistake. I waited a bit on this
  pull to make sure it was really the problem from production, but it's
  on ~2100 hosts now and I think we're good.

  Omar also noticed a commit in the queue would make new early ENOSPC
  problems. I pulled that out for now, which is why the top three
  commits are younger than the rest.

  Otherwise these are all fixes, some explaining very old bugs that
  we've been poking at for a while"

* 'for-linus-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix delalloc accounting leak caused by u32 overflow
  Btrfs: clear EXTENT_DEFRAG bits in finish_ordered_io
  btrfs: tree-log.c: Wrong printk information about namelen
  btrfs: fix race with relocation recovery and fs_root setup
  btrfs: fix memory leak in update_space_info failure path
  btrfs: use correct types for page indices in btrfs_page_exists_in_range
  btrfs: fix incorrect error return ret being passed to mapping_set_error
  btrfs: Make flush bios explicitely sync
  btrfs: fiemap: Cache and merge fiemap extent before submit it to user