Add a node describing the watchdog found in the application subsystem.
Reviewed-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Specify the firmware-name for the adsp, cdsp and mpss and enable the
nodes.
Reviewed-by: NJeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: NSibi Sankar <sibis@codeaurora.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Bluetooth is provided by a wcn3990, which is connected to the main SoC via
blsp1_uart3.
Signed-off-by: NJeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Bluetooth is provided by a wcn3990, which is connected to the main SoC via
blsp1_uart3.
Signed-off-by: NJeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

The blsp1_uart3 peripheral appears to be commonly used for interfacing with
other SoCs on a platform, such as a wcn3990 to provide bluetooth.
Signed-off-by: NJeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

The BAM in the blsp1 block can be used as a DMA engine to offload work
when managing any of the peripherals in the blsp.
Signed-off-by: NJeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Add nodes for Volume UP button connected to GPIO and Volume DOWN button,
which is handled by the pm8916 as is common with msm8916 devices.
Reviewed-by: NStephan Gerhold <stephan@gerhold.net>
Signed-off-by: NNikita Travkin <nikitos.tr@gmail.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

WCNSS is used on L8150 for WiFi and BT.
Its firmware isn't relocatable and must be loaded at specific address.
Reviewed-by: NStephan Gerhold <stephan@gerhold.net>
Signed-off-by: NNikita Travkin <nikitos.tr@gmail.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Thermal framework takes 0 as the lowest/default state for a
cooling/warming device. The current code has the order inverted with 1
corresponding to lowest state in hardware and 0 the highest state.
Invert this for a better fit with the thermal framework.
Signed-off-by: NThara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

In the same way as for msm8974-hammerhead, l21 load, used for SDCARD
VMMC, needs to be increased in order to prevent any voltage drop issues
(due to limited current) happening with some SDCARDS or during specific
operations (e.g. write).
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Fixes: 660a9763 (arm64: dts: qcom: db820c: Add pm8994 regulator node)
Signed-off-by: NLoic Poulain <loic.poulain@linaro.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Add nodes for basic GPIO connected hardware to the Samsung A3/A5 common dtsi.
This includes the Volume UP button, the Home button, and the hall sensor used
to sense "smart cover" open state. Related to that, add a node for the Volume
DOWN button, which is handled by the pm8916 as is common with msm8916 devices.

Tested-by: Stephan Gerhold <stephan@gerhold.net> # a5u
Reviewed-by: NStephan Gerhold <stephan@gerhold.net>
Signed-off-by: NMichael Srba <Michael.Srba@seznam.cz>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

We use a pinctrl "workaround" to toggle the UFS reset line. Now that UFS
controller can issue the reset, just specify the line as a GPIO and let
it be reset that way.
Signed-off-by: NStephen Boyd <swboyd@chromium.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Add the DT nodes for the network-on-chip interconnect buses found
on qcs404-based platforms.
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NGeorgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

msm8916.dtsi sets the iris compatible to "qcom,wcn3620".
While WCN3620 seems to be used on most MSM8916 devices,
MSM8916 can also be paired with another chip (e.g. for WiFi dual-band).

A5U uses WCN3660B instead, so the compatible needs to be overridden
to apply the correct configuration.

However, simply using "qcom,wcn3660" would be incorrect,
since WCN3660B requires a slightly different regulator configuration
compared to WCN3660.

Instead, it requires the same configuration as "qcom,wcn3680".
Replace the compatible with "qcom,wcn3680" for A5U to make WCNSS
work correctly.
Signed-off-by: NStephan Gerhold <stephan@gerhold.net>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

WCNSS is used on A3U and A5U for WiFi and BT,
and seems to work fine without further changes.

Enable it in the common include.
Signed-off-by: NStephan Gerhold <stephan@gerhold.net>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Allows QCS404 based designs to enable watchdog support
Reviewed-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NJorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

This fixed rate clock is required for the operation of some devices
(ie watchdog).
Reviewed-by: NStephen Boyd <sboyd@kernel.org>
Signed-off-by: NJorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Pull btrfs fixes from David Sterba:
 "A bunch of fixes that accumulated in recent weeks, mostly material for
  stable.

  Summary:

   - fix for regression from 5.3 that prevents to use balance convert
     with single profile

   - qgroup fixes: rescan race, accounting leak with multiple writers,
     potential leak after io failure recovery

   - fix for use after free in relocation (reported by KASAN)

   - other error handling fixups"

* tag 'for-5.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: qgroup: Fix reserved data space leak if we have multiple reserve calls
  btrfs: qgroup: Fix the wrong target io_tree when freeing reserved data space
  btrfs: Fix a regression which we can't convert to SINGLE profile
  btrfs: relocation: fix use-after-free on dead relocation roots
  Btrfs: fix race setting up and completing qgroup rescan workers
  Btrfs: fix missing error return if writeback for extent buffer never started
  btrfs: adjust dirty_metadata_bytes after writeback failure of extent buffer
  Btrfs: fix selftests failure due to uninitialized i_mode in test inodes

Pull csky updates from Guo Ren:
 "This round of csky subsystem just some fixups:

   - Fix mb() synchronization problem

   - Fix dma_alloc_coherent with PAGE_SO attribute

   - Fix cache_op failed when cross memory ZONEs

   - Optimize arch_sync_dma_for_cpu/device with dma_inv_range

   - Fix ioremap function losing

   - Fix arch_get_unmapped_area() implementation

   - Fix defer cache flush for 610

   - Support kernel non-aligned access

   - Fix 610 vipt cache flush mechanism

   - Fix add zero_fp fixup perf backtrace panic

   - Move static keyword to the front of declaration

   - Fix csky_pmu.max_period assignment

   - Use generic free_initrd_mem()

   - entry: Remove unneeded need_resched() loop"

* tag 'csky-for-linus-5.4-rc1' of git://github.com/c-sky/csky-linux:
  csky: Move static keyword to the front of declaration
  csky: entry: Remove unneeded need_resched() loop
  csky: Fixup csky_pmu.max_period assignment
  csky: Fixup add zero_fp fixup perf backtrace panic
  csky: Use generic free_initrd_mem()
  csky: Fixup 610 vipt cache flush mechanism
  csky: Support kernel non-aligned access
  csky: Fixup defer cache flush for 610
  csky: Fixup arch_get_unmapped_area() implementation
  csky: Fixup ioremap function losing
  csky: Optimize arch_sync_dma_for_cpu/device with dma_inv_range
  csky/dma: Fixup cache_op failed when cross memory ZONEs
  csky: Fixup dma_alloc_coherent with PAGE_SO attribute
  csky: Fixup mb() synchronization problem

Pull ARM SoC fixes from Olof Johansson:
 "A few fixes that have trickled in through the merge window:

   - Video fixes for OMAP due to panel-dpi driver removal

   - Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7

   - Fixing arch version on ASpeed ast2500

   - Two fixes for reset handling on ARM SCMI"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: aspeed: ast2500 is ARMv6K
  reset: reset-scmi: add missing handle initialisation
  firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset
  bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
  ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
  ARM: dts: am3517-evm: Fix missing video
  ARM: dts: logicpd-torpedo-baseboard: Fix missing video
  ARM: omap2plus_defconfig: Fix missing video
  bus: ti-sysc: Fix handling of invalid clocks
  bus: ti-sysc: Fix clock handling for no-idle quirks

Pull tracing fixes from Steven Rostedt:
 "A few more tracing fixes:

   - Fix a buffer overflow by checking nr_args correctly in probes

   - Fix a warning that is reported by clang

   - Fix a possible memory leak in error path of filter processing

   - Fix the selftest that checks for failures, but wasn't failing

   - Minor clean up on call site output of a memory trace event"

* tag 'trace-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  selftests/ftrace: Fix same probe error test
  mm, tracing: Print symbol name for call_site in trace events
  tracing: Have error path in predicate_parse() free its allocated memory
  tracing: Fix clang -Wint-in-bool-context warnings in IF_ASSIGN macro
  tracing/probe: Fix to check the difference of nr_args before adding probe

Pull more MMC updates from Ulf Hansson:
 "A couple more updates/fixes for MMC:

   - sdhci-pci: Add Genesys Logic GL975x support

   - sdhci-tegra: Recover loss in throughput for DMA

   - sdhci-of-esdhc: Fix DMA bug"

* tag 'mmc-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: host: sdhci-pci: Add Genesys Logic GL975x support
  mmc: tegra: Implement ->set_dma_mask()
  mmc: sdhci: Let drivers define their DMA mask
  mmc: sdhci-of-esdhc: set DMA snooping based on DMA coherence
  mmc: sdhci: improve ADMA error reporting

Move the static keyword to the front of declaration of
csky_pmu_of_device_ids, and resolve the following compiler
warning that can be seen when building with warnings
enabled (W=1):

arch/csky/kernel/perf_event.c:1340:1: warning:
  ‘static’ is not at beginning of declaration [-Wold-style-declaration]
Signed-off-by: NKrzysztof Wilczynski <kw@linux.com>
Signed-off-by: NGuo Ren <guoren@kernel.org>

Since the enabling and disabling of IRQs within preempt_schedule_irq()
is contained in a need_resched() loop, we don't need the outer arch
code loop.
Signed-off-by: NValentin Schneider <valentin.schneider@arm.com>
Signed-off-by: NGuo Ren <guoren@kernel.org>

Pull Documentation/process update from Greg KH:
 "Here are two small Documentation/process/embargoed-hardware-issues.rst
  file updates that missed my previous char/misc pull request.

  The first one adds an Intel representative for the process, and the
  second one cleans up the text a bit more when it comes to how the
  disclosure rules work, as it was a bit confusing to some companies"

* tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  Documentation/process: Clarify disclosure rules
  Documentation/process: Volunteer as the ambassador for Intel

Pull more vfs updates from Al Viro:
 "A couple of misc patches"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  afs dynroot: switch to simple_dir_operations
  fs/handle.c - fix up kerneldoc

Pull more cifs updates from Steve French:
 "Fixes from the recent SMB3 Test events and Storage Developer
  Conference (held the last two weeks).

  Here are nine smb3 patches including an important patch for debugging
  traces with wireshark, with three patches marked for stable.

  Additional fixes from last week to better handle some newly discovered
  reparse points, and a fix the create/mkdir path for setting the mode
  more atomically (in SMB3 Create security descriptor context), and one
  for path name processing are still being tested so are not included
  here"

* tag '5.4-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: Fix oplock handling for SMB 2.1+ protocols
  smb3: missing ACL related flags
  smb3: pass mode bits into create calls
  smb3: Add missing reparse tags
  CIFS: fix max ea value size
  fs/cifs/sess.c: Remove set but not used variable 'capabilities'
  fs/cifs/smb2pdu.c: Make SMB2_notify_init static
  smb3: fix leak in "open on server" perf counter
  smb3: allow decryption keys to be dumped by admin for debugging

The csky_pmu.max_period has type u64, and BIT() can only return
32 bits unsigned long on C-SKY. The initialization for max_period
will be incorrect when count_width is bigger than 32.

Use BIT_ULL()
Signed-off-by: NMao Han <han_mao@c-sky.com>
Signed-off-by: NGuo Ren <ren_guo@c-sky.com>

We need set fp zero to let backtrace know the end. The patch fixup perf
callchain panic problem, because backtrace didn't know what is the end
of fp.
Signed-off-by: NGuo Ren <ren_guo@c-sky.com>
Reported-by: NMao Han <han_mao@c-sky.com>

The csky implementation of free_initrd_mem() is an open-coded version of
free_reserved_area() without poisoning.

Remove it and make csky use the generic version of free_initrd_mem().
Signed-off-by: NMike Rapoport <rppt@linux.ibm.com>
Signed-off-by: NGuo Ren <guoren@kernel.org>

Merge active entropy generation updates.

This is admittedly partly "for discussion".  We need to have a way
forward for the boot time deadlocks where user space ends up waiting for
more entropy, but no entropy is forthcoming because the system is
entirely idle just waiting for something to happen.

While this was triggered by what is arguably a user space bug with
GDM/gnome-session asking for secure randomness during early boot, when
they didn't even need any such truly secure thing, the issue ends up
being that our "getrandom()" interface is prone to that kind of
confusion, because people don't think very hard about whether they want
to block for sufficient amounts of entropy.

The approach here-in is to decide to not just passively wait for entropy
to happen, but to start actively collecting it if it is missing.  This
is not necessarily always possible, but if the architecture has a CPU
cycle counter, there is a fair amount of noise in the exact timings of
reasonably complex loads.

We may end up tweaking the load and the entropy estimates, but this
should be at least a reasonable starting point.

As part of this, we also revert the revert of the ext4 IO pattern
improvement that ended up triggering the reported lack of external
entropy.

* getrandom() active entropy waiting:
  Revert "Revert "ext4: make __ext4_get_inode_loc plug""
  random: try to actively add entropy rather than passively wait for it

This reverts commit 72dbcf72.

Instead of waiting forever for entropy that may just not happen, we now
try to actively generate entropy when required, and are thus hopefully
avoiding the problem that caused the nice ext4 IO pattern fix to be
reverted.

So revert the revert.

Cc: Ahmed S. Darwish <darwish.07@gmail.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Alexander E. Patrakov <patrakov@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For 5.3 we had to revert a nice ext4 IO pattern improvement, because it
caused a bootup regression due to lack of entropy at bootup together
with arguably broken user space that was asking for secure random
numbers when it really didn't need to.

See commit 72dbcf72 (Revert "ext4: make __ext4_get_inode_loc plug").

This aims to solve the issue by actively generating entropy noise using
the CPU cycle counter when waiting for the random number generator to
initialize.  This only works when you have a high-frequency time stamp
counter available, but that's the case on all modern x86 CPU's, and on
most other modern CPU's too.

What we do is to generate jitter entropy from the CPU cycle counter
under a somewhat complex load: calling the scheduler while also
guaranteeing a certain amount of timing noise by also triggering a
timer.

I'm sure we can tweak this, and that people will want to look at other
alternatives, but there's been a number of papers written on jitter
entropy, and this should really be fairly conservative by crediting one
bit of entropy for every timer-induced jump in the cycle counter.  Not
because the timer itself would be all that unpredictable, but because
the interaction between the timer and the loop is going to be.

Even if (and perhaps particularly if) the timer actually happens on
another CPU, the cacheline interaction between the loop that reads the
cycle counter and the timer itself firing is going to add perturbations
to the cycle counter values that get mixed into the entropy pool.

As Thomas pointed out, with a modern out-of-order CPU, even quite simple
loops show a fair amount of hard-to-predict timing variability even in
the absense of external interrupts.  But this tries to take that further
by actually having a fairly complex interaction.

This is not going to solve the entropy issue for architectures that have
no CPU cycle counter, but it's not clear how (and if) that is solvable,
and the hardware in question is largely starting to be irrelevant.  And
by doing this we can at least avoid some of the even more contentious
approaches (like making the entropy waiting time out in order to avoid
the possibly unbounded waiting).

Cc: Ahmed Darwish <darwish.07@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Nicholas Mc Guire <hofrat@opentech.at>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Alexander E. Patrakov <patrakov@gmail.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge tag 'fixes-5.4-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

Fixes for omap variants

Few fixes for ti-sysc interconnect target module driver for no-idle
quirks that caused nfsroot to fail on some dra7 boards.

And let's fixes to get LCD working again for logicpd board that got
broken a while back with removal of panel-dpi driver. We need to now
use generic CONFIG_DRM_PANEL_SIMPLE instead.

* tag 'fixes-5.4-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
  ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
  ARM: dts: am3517-evm: Fix missing video
  ARM: dts: logicpd-torpedo-baseboard: Fix missing video
  ARM: omap2plus_defconfig: Fix missing video
  bus: ti-sysc: Fix handling of invalid clocks
  bus: ti-sysc: Fix clock handling for no-idle quirks

Link: https://lore.kernel.org/r/pull-1568819401-72461@atomide.comSigned-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'scmi-fixes-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes

ARM SCMI fixes for v5.4

Couple of fixes: one in scmi reset driver initialising missed scmi handle
and an other in scmi reset API implementation fixing the assignment of
reset state

* tag 'scmi-fixes-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  reset: reset-scmi: add missing handle initialisation
  firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset

Link: https://lore.kernel.org/r/20190918142139.GA4370@bogusSigned-off-by: NOlof Johansson <olof@lixom.net>

More libnvdimm updates from Dan Williams:

 - Complete the reworks to interoperate with powerpc dynamic huge page
   sizes

 - Fix a crash due to missed accounting for the powerpc 'struct
   page'-memmap mapping granularity

 - Fix badblock initialization for volatile (DRAM emulated) pmem ranges

 - Stop triggering request_key() notifications to userspace when
   NVDIMM-security is disabled / not present

 - Miscellaneous small fixups

* tag 'libnvdimm-fixes-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  libnvdimm/region: Enable MAP_SYNC for volatile regions
  libnvdimm: prevent nvdimm from requesting key when security is disabled
  libnvdimm/region: Initialize bad block for volatile namespaces
  libnvdimm/nfit_test: Fix acpi_handle redefinition
  libnvdimm/altmap: Track namespace boundaries in altmap
  libnvdimm: Fix endian conversion issues 
  libnvdimm/dax: Pick the right alignment default when creating dax devices
  powerpc/book3s64: Export has_transparent_hugepage() related functions.

Pull thermal SoC updates from Eduardo Valentin:
 "This is a really small pull in the midst of a lot of pending patches.

  We are in the middle of restructuring how we are maintaining the
  thermal subsystem, as per discussion in our last LPC. For now, I am
  sending just some changes that were pending in my tree. Looking
  forward to get a more streamlined process in the next merge window"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
  thermal: db8500: Rewrite to be a pure OF sensor
  thermal: db8500: Use dev helper variable
  thermal: db8500: Finalize device tree conversion
  thermal: thermal_mmio: remove some dead code

Pull  more i2c updates from Wolfram Sang:

 - make Lenovo Yoga C630 boot now that the dependencies are merged

 - restore BlockProcessCall for i801, accidently removed in this merge
   window

 - a bugfix for the riic driver

 - an improvement to the slave-eeprom driver which should have been in
   the first pull request but sadly got lost in the process

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: slave-eeprom: Add read only mode
  i2c: i801: Bring back Block Process Call support for certain platforms
  i2c: riic: Clear NACK in tend isr
  i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630

Pull iommu fixes from Joerg Roedel:
 "A couple of fixes for the AMD IOMMU driver have piled up:

   - Some fixes for the reworked IO page-table which caused memory leaks
     or did not allow to downgrade mappings under some conditions.

   - Locking fixes to fix a couple of possible races around accessing
     'struct protection_domain'. The races got introduced when the
     dma-ops path became lock-less in the fast-path"

* tag 'iommu-fixes-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Lock code paths traversing protection_domain->dev_list
  iommu/amd: Lock dev_data in attach/detach code paths
  iommu/amd: Check for busy devices earlier in attach_device()
  iommu/amd: Take domain->lock for complete attach/detach path
  iommu/amd: Remove amd_iommu_devtable_lock
  iommu/amd: Remove domain->updated
  iommu/amd: Wait for completion of IOTLB flush in attach_device
  iommu/amd: Unmap all L7 PTEs when downgrading page-sizes
  iommu/amd: Introduce first_pte_l7() helper
  iommu/amd: Fix downgrading default page-sizes in alloc_pte()
  iommu/amd: Fix pages leak in free_pagetable()