Currently it is possible for userspace (e.g. QEMU) to set a value
for the MSR for a guest VCPU which has both of the TS bits set,
which is an illegal combination.  The result of this is that when
we execute a hrfid (hypervisor return from interrupt doubleword)
instruction to enter the guest, the CPU will take a TM Bad Thing
type of program interrupt (vector 0x700).

Now, if PR KVM is configured in the kernel along with HV KVM, we
actually handle this without crashing the host or giving hypervisor
privilege to the guest; instead what happens is that we deliver a
program interrupt to the guest, with SRR0 reflecting the address
of the hrfid instruction and SRR1 containing the MSR value at that
point.  If PR KVM is not configured in the kernel, then we try to
run the host's program interrupt handler with the MMU set to the
guest context, which almost certainly causes a host crash.

This closes the hole by making kvmppc_set_msr_hv() check for the
illegal combination and force the TS field to a safe value (00,
meaning non-transactional).

Cc: stable@vger.kernel.org # v3.9+
Signed-off-by: NPaul Mackerras <paulus@samba.org>

As we saw with the TM Bad Thing type of program interrupt occurring
on the hrfid that enters the guest, it is not completely impossible
to have a trap occurring in the guest entry/exit code, despite the
fact that the code has been written to avoid taking any traps.

This adds a check in the kvmppc_handle_exit_hv() function to detect
the case when a trap has occurred in the hypervisor-mode code, and
instead of treating it just like a trap in guest code, we now print
a message and return to userspace with a KVM_EXIT_INTERNAL_ERROR
exit reason.

Of the various interrupts that get handled in the assembly code in
the guest exit path and that can return directly to the guest, the
only one that can occur when MSR.HV=1 and MSR.EE=0 is machine check
(other than system call, which we can avoid just by not doing a sc
instruction).  Therefore this adds code to the machine check path to
ensure that if the MCE occurred in hypervisor mode, we exit to the
host rather than trying to continue the guest.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Create a single function that flushes everything (FP, VMX, VSX, SPE).
Doing this all at once means we only do one MSR write.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Let's reuse the new common function for VPCU lookup by id.
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NDominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
[split out the new function into a separate patch]

In static micro-threading modes, the dynamic micro-threading code
is supposed to be disabled, because subcores can't make independent
decisions about what micro-threading mode to put the core in - there is
only one micro-threading mode for the whole core.  The code that
implements dynamic micro-threading checks for this, except that the
check was missed in one case.  This means that it is possible for a
subcore in static 2-way micro-threading mode to try to put the core
into 4-way micro-threading mode, which usually leads to stuck CPUs,
spinlock lockups, and other stalls in the host.

The problem was in the can_split_piggybacked_subcores() function, which
should always return false if the system is in a static micro-threading
mode.  This fixes the problem by making can_split_piggybacked_subcores()
use subcore_config_ok() for its checks, as subcore_config_ok() includes
the necessary check for the static micro-threading modes.

Credit to Gautham Shenoy for working out that the reason for the hangs
and stalls we were seeing was that we were trying to do dynamic 4-way
micro-threading while we were in static 2-way mode.

Fixes: b4deba5c
Cc: vger@stable.kernel.org # v4.3
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This reverts commit 9678cdaa ("Use the POWER8 Micro Partition
Prefetch Engine in KVM HV on POWER8") because the original commit had
multiple, partly self-cancelling bugs, that could cause occasional
memory corruption.

In fact the logmpp instruction was incorrectly using register r0 as the
source of the buffer address and operation code, and depending on what
was in r0, it would either do nothing or corrupt the 64k page pointed to
by r0.

The logmpp instruction encoding and the operation code definitions could
be corrected, but then there is the problem that there is no clearly
defined way to know when the hardware has finished writing to the
buffer.

The original commit attempted to work around this by aborting the
write-out before starting the prefetch, but this is ineffective in the
case where the virtual core is now executing on a different physical
core from the one where the write-out was initiated.

These problems plus advice from the hardware designers not to use the
function (since the measured performance improvement from using the
feature was actually mostly negative), mean that reverting the code is
the best option.

Fixes: 9678cdaa ("Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8")
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This fixes a bug which results in stale vcore pointers being left in
the per-cpu preempted vcore lists when a VM is destroyed.  The result
of the stale vcore pointers is usually either a crash or a lockup
inside collect_piggybacks() when another VM is run.  A typical
lockup message looks like:

[  472.161074] NMI watchdog: BUG: soft lockup - CPU#24 stuck for 22s! [qemu-system-ppc:7039]
[  472.161204] Modules linked in: kvm_hv kvm_pr kvm xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw ses enclosure shpchp rtc_opal i2c_opal powernv_rng binfmt_misc dm_service_time scsi_dh_alua radeon i2c_algo_bit drm_kms_helper ttm drm tg3 ptp pps_core cxgb3 ipr i2c_core mdio dm_multipath [last unloaded: kvm_hv]
[  472.162111] CPU: 24 PID: 7039 Comm: qemu-system-ppc Not tainted 4.2.0-kvm+ #49
[  472.162187] task: c000001e38512750 ti: c000001e41bfc000 task.ti: c000001e41bfc000
[  472.162262] NIP: c00000000096b094 LR: c00000000096b08c CTR: c000000000111130
[  472.162337] REGS: c000001e41bff520 TRAP: 0901   Not tainted  (4.2.0-kvm+)
[  472.162399] MSR: 9000000100009033 <SF,HV,EE,ME,IR,DR,RI,LE>  CR: 24848844  XER: 00000000
[  472.162588] CFAR: c00000000096b0ac SOFTE: 1
GPR00: c000000000111170 c000001e41bff7a0 c00000000127df00 0000000000000001
GPR04: 0000000000000003 0000000000000001 0000000000000000 0000000000874821
GPR08: c000001e41bff8e0 0000000000000001 0000000000000000 d00000000efde740
GPR12: c000000000111130 c00000000fdae400
[  472.163053] NIP [c00000000096b094] _raw_spin_lock_irqsave+0xa4/0x130
[  472.163117] LR [c00000000096b08c] _raw_spin_lock_irqsave+0x9c/0x130
[  472.163179] Call Trace:
[  472.163206] [c000001e41bff7a0] [c000001e41bff7f0] 0xc000001e41bff7f0 (unreliable)
[  472.163295] [c000001e41bff7e0] [c000000000111170] __wake_up+0x40/0x90
[  472.163375] [c000001e41bff830] [d00000000efd6fc0] kvmppc_run_core+0x1240/0x1950 [kvm_hv]
[  472.163465] [c000001e41bffa30] [d00000000efd8510] kvmppc_vcpu_run_hv+0x5a0/0xd90 [kvm_hv]
[  472.163559] [c000001e41bffb70] [d00000000e9318a4] kvmppc_vcpu_run+0x44/0x60 [kvm]
[  472.163653] [c000001e41bffba0] [d00000000e92e674] kvm_arch_vcpu_ioctl_run+0x64/0x170 [kvm]
[  472.163745] [c000001e41bffbe0] [d00000000e9263a8] kvm_vcpu_ioctl+0x538/0x7b0 [kvm]
[  472.163834] [c000001e41bffd40] [c0000000002d0f50] do_vfs_ioctl+0x480/0x7c0
[  472.163910] [c000001e41bffde0] [c0000000002d1364] SyS_ioctl+0xd4/0xf0
[  472.163986] [c000001e41bffe30] [c000000000009260] system_call+0x38/0xd0
[  472.164060] Instruction dump:
[  472.164098] ebc1fff0 ebe1fff8 7c0803a6 4e800020 60000000 60000000 60420000 8bad02e2
[  472.164224] 7fc3f378 4b6a57c1 60000000 7c210b78 <e92d0000> 89290009 792affe3 40820070

The bug is that kvmppc_run_vcpu does not correctly handle the case
where a vcpu task receives a signal while its guest vcpu is executing
in the guest as a result of being piggy-backed onto the execution of
another vcore.  In that case we need to wait for the vcpu to finish
executing inside the guest, and then remove this vcore from the
preempted vcores list.  That way, we avoid leaving this vcpu's vcore
on the preempted vcores list when the vcpu gets interrupted.

Fixes: ec257165Reported-by: NThomas Huth <thuth@redhat.com>
Tested-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The current dynamic micro-threading code has a race due to which a
secondary thread naps when it is supposed to be running a vcpu. As a
side effect of this, on a guest exit, the primary thread in
kvmppc_wait_for_nap() finds that this secondary thread hasn't cleared
its vcore pointer. This results in "CPU X seems to be stuck!"
warnings.

The race is possible since the primary thread on exiting the guests
only waits for all the secondaries to clear its vcore pointer. It
subsequently expects the secondary threads to enter nap while it
unsplits the core. A secondary thread which hasn't yet entered the nap
will loop in kvm_no_guest until its vcore pointer and the do_nap flag
are unset. Once the core has been unsplit, a new vcpu thread can grab
the core and set the do_nap flag *before* setting the vcore pointers
of the secondary. As a result, the secondary thread will now enter nap
via kvm_unsplit_nap instead of running the guest vcpu.

Fix this by setting the do_nap flag after setting the vcore pointer in
the PACA of the secondary in kvmppc_run_core. Also, ensure that a
secondary thread doesn't nap in kvm_unsplit_nap when the vcore pointer
in its PACA struct is set.

Fixes: b4deba5cSigned-off-by: NGautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Whenever a vcore state is VCORE_PREEMPT we need to be counting stolen
time for it.  This currently isn't the case when we have a vcore that
no longer has any runnable threads in it but still has a runner task,
so we do an explicit call to kvmppc_core_start_stolen() in that case.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

When a vcore gets preempted, we put it on the preempted vcore list for
the current CPU.  The runner task then calls schedule() and comes back
some time later and takes itself off the list.  We need to be careful
to lock the list that it was put onto, which may not be the list for the
current CPU since the runner task may have moved to another CPU.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This builds on the ability to run more than one vcore on a physical
core by using the micro-threading (split-core) modes of the POWER8
chip.  Previously, only vcores from the same VM could be run together,
and (on POWER8) only if they had just one thread per core.  With the
ability to split the core on guest entry and unsplit it on guest exit,
we can run up to 8 vcpu threads from up to 4 different VMs, and we can
run multiple vcores with 2 or 4 vcpus per vcore.

Dynamic micro-threading is only available if the static configuration
of the cores is whole-core mode (unsplit), and only on POWER8.

To manage this, we introduce a new kvm_split_mode struct which is
shared across all of the subcores in the core, with a pointer in the
paca on each thread.  In addition we extend the core_info struct to
have information on each subcore.  When deciding whether to add a
vcore to the set already on the core, we now have two possibilities:
(a) piggyback the vcore onto an existing subcore, or (b) start a new
subcore.

Currently, when any vcpu needs to exit the guest and switch to host
virtual mode, we interrupt all the threads in all subcores and switch
the core back to whole-core mode.  It may be possible in future to
allow some of the subcores to keep executing in the guest while
subcore 0 switches to the host, but that is not implemented in this
patch.

This adds a module parameter called dynamic_mt_modes which controls
which micro-threading (split-core) modes the code will consider, as a
bitmap.  In other words, if it is 0, no micro-threading mode is
considered; if it is 2, only 2-way micro-threading is considered; if
it is 4, only 4-way, and if it is 6, both 2-way and 4-way
micro-threading mode will be considered.  The default is 6.

With this, we now have secondary threads which are the primary thread
for their subcore and therefore need to do the MMU switch.  These
threads will need to be started even if they have no vcpu to run, so
we use the vcore pointer in the PACA rather than the vcpu pointer to
trigger them.

It is now possible for thread 0 to find that an exit has been
requested before it gets to switch the subcore state to the guest.  In
that case we haven't added the guest's timebase offset to the
timebase, so we need to be careful not to subtract the offset in the
guest exit path.  In fact we just skip the whole path that switches
back to host context, since we haven't switched to the guest context.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

When running a virtual core of a guest that is configured with fewer
threads per core than the physical cores have, the extra physical
threads are currently unused.  This makes it possible to use them to
run one or more other virtual cores from the same guest when certain
conditions are met.  This applies on POWER7, and on POWER8 to guests
with one thread per virtual core.  (It doesn't apply to POWER8 guests
with multiple threads per vcore because they require a 1-1 virtual to
physical thread mapping in order to be able to use msgsndp and the
TIR.)

The idea is that we maintain a list of preempted vcores for each
physical cpu (i.e. each core, since the host runs single-threaded).
Then, when a vcore is about to run, it checks to see if there are
any vcores on the list for its physical cpu that could be
piggybacked onto this vcore's execution.  If so, those additional
vcores are put into state VCORE_PIGGYBACK and their runnable VCPU
threads are started as well as the original vcore, which is called
the master vcore.

After the vcores have exited the guest, the extra ones are put back
onto the preempted list if any of their VCPUs are still runnable and
not idle.

This means that vcpu->arch.ptid is no longer necessarily the same as
the physical thread that the vcpu runs on.  In order to make it easier
for code that wants to send an IPI to know which CPU to target, we
now store that in a new field in struct vcpu_arch, called thread_cpu.
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Tested-by: NLaurent Vivier <lvivier@redhat.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

When compiling the KVM code for POWER with "make C=1", sparse
complains about functions missing proper prototypes and a 64-bit
constant missing the ULL prefix. Let's fix this by making the
functions static or by including the proper header with the
prototypes, and by appending a ULL prefix to the constant
PPC_MPPE_ADDRESS_MASK.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Function should_resched() is equal to (!preempt_count() && need_resched()).
In preemptive kernel preempt_count here is non-zero because of vc->lock.
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Graf <agraf@suse.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150715095203.12246.72922.stgit@buzzSigned-off-by: NIngo Molnar <mingo@kernel.org>

This lets the function access the new memory slot without going through
kvm_memslots and id_to_memslot.  It will simplify the code when more
than one address space will be supported.

Unfortunately, the "const"ness of the new argument must be casted
away in two places.  Fixing KVM to accept const struct kvm_memory_slot
pointers would require modifications in pretty much all architectures,
and is left for later.
Reviewed-by: NRadim Krcmar <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Architecture-specific helpers are not supposed to muck with
struct kvm_userspace_memory_region contents.  Add const to
enforce this.

In order to eliminate the only write in __kvm_set_memory_region,
the cleaning of deleted slots is pulled up from update_memslots
to __kvm_set_memory_region.
Reviewed-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Reviewed-by: NRadim Krcmar <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

kvm_memslots provides lockdep checking.  Use it consistently instead of
explicit dereferencing of kvm->memslots.
Reviewed-by: NRadim Krcmar <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This fixes a regression introduced in commit 25fedfca, "KVM: PPC:
Book3S HV: Move vcore preemption point up into kvmppc_run_vcpu", which
leads to a user-triggerable oops.

In the case where we try to run a vcore on a physical core that is
not in single-threaded mode, or the vcore has too many threads for
the physical core, we iterate the list of runnable vcpus to make
each one return an EBUSY error to userspace.  Since this involves
taking each vcpu off the runnable_threads list for the vcore, we
need to use list_for_each_entry_safe rather than list_for_each_entry
to traverse the list.  Otherwise the kernel will crash with an oops
message like this:

Unable to handle kernel paging request for data at address 0x000fff88
Faulting instruction address: 0xd00000001e635dc8
Oops: Kernel access of bad area, sig: 11 [#2]
SMP NR_CPUS=1024 NUMA PowerNV
...
CPU: 48 PID: 91256 Comm: qemu-system-ppc Tainted: G      D        3.18.0 #1
task: c00000274e507500 ti: c0000027d1924000 task.ti: c0000027d1924000
NIP: d00000001e635dc8 LR: d00000001e635df8 CTR: c00000000011ba50
REGS: c0000027d19275b0 TRAP: 0300   Tainted: G      D         (3.18.0)
MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE>  CR: 22002824  XER: 00000000
CFAR: c000000000008468 DAR: 00000000000fff88 DSISR: 40000000 SOFTE: 1
GPR00: d00000001e635df8 c0000027d1927830 d00000001e64c850 0000000000000001
GPR04: 0000000000000001 0000000000000001 0000000000000000 0000000000000000
GPR08: 0000000000200200 0000000000000000 0000000000000000 d00000001e63e588
GPR12: 0000000000002200 c000000007dbc800 c000000fc7800000 000000000000000a
GPR16: fffffffffffffffc c000000fd5439690 c000000fc7801c98 0000000000000001
GPR20: 0000000000000003 c0000027d1927aa8 c000000fd543b348 c000000fd543b350
GPR24: 0000000000000000 c000000fa57f0000 0000000000000030 0000000000000000
GPR28: fffffffffffffff0 c000000fd543b328 00000000000fe468 c000000fd543b300
NIP [d00000001e635dc8] kvmppc_run_core+0x198/0x17c0 [kvm_hv]
LR [d00000001e635df8] kvmppc_run_core+0x1c8/0x17c0 [kvm_hv]
Call Trace:
[c0000027d1927830] [d00000001e635df8] kvmppc_run_core+0x1c8/0x17c0 [kvm_hv] (unreliable)
[c0000027d1927a30] [d00000001e638350] kvmppc_vcpu_run_hv+0x5b0/0xdd0 [kvm_hv]
[c0000027d1927b70] [d00000001e510504] kvmppc_vcpu_run+0x44/0x60 [kvm]
[c0000027d1927ba0] [d00000001e50d4a4] kvm_arch_vcpu_ioctl_run+0x64/0x170 [kvm]
[c0000027d1927be0] [d00000001e504be8] kvm_vcpu_ioctl+0x5e8/0x7a0 [kvm]
[c0000027d1927d40] [c0000000002d6720] do_vfs_ioctl+0x490/0x780
[c0000027d1927de0] [c0000000002d6ae4] SyS_ioctl+0xd4/0xf0
[c0000027d1927e30] [c000000000009358] syscall_exit+0x0/0x98
Instruction dump:
60000000 60420000 387e1b30 38800003 38a00001 38c00000 480087d9 e8410018
ebde1c98 7fbdf040 3bdee368 419e0048 <813e1b20> 939e1b18 2f890001 409effcc
---[ end trace 8cdf50251cca6680 ]---

Fixes: 25fedfcaSigned-off-by: NPaul Mackerras <paulus@samba.org>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This uses msgsnd where possible for signalling other threads within
the same core on POWER8 systems, rather than IPIs through the XICS
interrupt controller.  This includes waking secondary threads to run
the guest, the interrupts generated by the virtual XICS, and the
interrupts to bring the other threads out of the guest when exiting.

Aggregated statistics from debugfs across vcpus for a guest with 32
vcpus, 8 threads/vcore, running on a POWER8, show this before the
change:

 rm_entry:     3387.6ns (228 - 86600, 1008969 samples)
  rm_exit:     4561.5ns (12 - 3477452, 1009402 samples)
  rm_intr:     1660.0ns (12 - 553050, 3600051 samples)

and this after the change:

 rm_entry:     3060.1ns (212 - 65138, 953873 samples)
  rm_exit:     4244.1ns (12 - 9693408, 954331 samples)
  rm_intr:     1342.3ns (12 - 1104718, 3405326 samples)

for a test of booting Fedora 20 big-endian to the login prompt.

The time taken for a H_PROD hcall (which is handled in the host
kernel) went down from about 35 microseconds to about 16 microseconds
with this change.

The noinline added to kvmppc_run_core turned out to be necessary for
good performance, at least with gcc 4.9.2 as packaged with Fedora 21
and a little-endian POWER8 host.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Currently, the entry_exit_count field in the kvmppc_vcore struct
contains two 8-bit counts, one of the threads that have started entering
the guest, and one of the threads that have started exiting the guest.
This changes it to an entry_exit_map field which contains two bitmaps
of 8 bits each.  The advantage of doing this is that it gives us a
bitmap of which threads need to be signalled when exiting the guest.
That means that we no longer need to use the trick of setting the
HDEC to 0 to pull the other threads out of the guest, which led in
some cases to a spurious HDEC interrupt on the next guest entry.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

We can tell when a secondary thread has finished running a guest by
the fact that it clears its kvm_hstate.kvm_vcpu pointer, so there
is no real need for the nap_count field in the kvmppc_vcore struct.
This changes kvmppc_wait_for_nap to poll the kvm_hstate.kvm_vcpu
pointers of the secondary threads rather than polling vc->nap_count.
Besides reducing the size of the kvmppc_vcore struct by 8 bytes,
this also means that we can tell which secondary threads have got
stuck and thus print a more informative error message.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Rather than calling cond_resched() in kvmppc_run_core() before doing
the post-processing for the vcpus that we have just run (that is,
calling kvmppc_handle_exit_hv(), kvmppc_set_timer(), etc.), we now do
that post-processing before calling cond_resched(), and that post-
processing is moved out into its own function, post_guest_process().

The reschedule point is now in kvmppc_run_vcpu() and we define a new
vcore state, VCORE_PREEMPT, to indicate that that the vcore's runner
task is runnable but not running.  (Doing the reschedule with the
vcore in VCORE_INACTIVE state would be bad because there are potentially
other vcpus waiting for the runner in kvmppc_wait_for_exec() which
then wouldn't get woken up.)

Also, we make use of the handy cond_resched_lock() function, which
unlocks and relocks vc->lock for us around the reschedule.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Previously, if kvmppc_run_core() was running a VCPU that needed a VPA
update (i.e. one of its 3 virtual processor areas needed to be pinned
in memory so the host real mode code can update it on guest entry and
exit), we would drop the vcore lock and do the update there and then.
Future changes will make it inconvenient to drop the lock, so instead
we now remove it from the list of runnable VCPUs and wake up its
VCPU task.  This will have the effect that the VCPU task will exit
kvmppc_run_vcpu(), go around the do loop in kvmppc_vcpu_run_hv(), and
re-enter kvmppc_run_vcpu(), whereupon it will do the necessary call
to kvmppc_update_vpas() and then rejoin the vcore.

The one complication is that the runner VCPU (whose VCPU task is the
current task) might be one of the ones that gets removed from the
runnable list.  In that case we just return from kvmppc_run_core()
and let the code in kvmppc_run_vcpu() wake up another VCPU task to be
the runner if necessary.

This all means that the VCORE_STARTING state is no longer used, so we
remove it.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This reads the timebase at various points in the real-mode guest
entry/exit code and uses that to accumulate total, minimum and
maximum time spent in those parts of the code.  Currently these
times are accumulated per vcpu in 5 parts of the code:

* rm_entry - time taken from the start of kvmppc_hv_entry() until
  just before entering the guest.
* rm_intr - time from when we take a hypervisor interrupt in the
  guest until we either re-enter the guest or decide to exit to the
  host.  This includes time spent handling hcalls in real mode.
* rm_exit - time from when we decide to exit the guest until the
  return from kvmppc_hv_entry().
* guest - time spend in the guest
* cede - time spent napping in real mode due to an H_CEDE hcall
  while other threads in the same vcore are active.

These times are exposed in debugfs in a directory per vcpu that
contains a file called "timings".  This file contains one line for
each of the 5 timings above, with the name followed by a colon and
4 numbers, which are the count (number of times the code has been
executed), the total time, the minimum time, and the maximum time,
all in nanoseconds.

The overhead of the extra code amounts to about 30ns for an hcall that
is handled in real mode (e.g. H_SET_DABR), which is about 25%.  Since
production environments may not wish to incur this overhead, the new
code is conditional on a new config symbol,
CONFIG_KVM_BOOK3S_HV_EXIT_TIMING.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This creates a debugfs directory for each HV guest (assuming debugfs
is enabled in the kernel config), and within that directory, a file
by which the contents of the guest's HPT (hashed page table) can be
read.  The directory is named vmnnnn, where nnnn is the PID of the
process that created the guest.  The file is named "htab".  This is
intended to help in debugging problems in the host's management
of guest memory.

The contents of the file consist of a series of lines like this:

  3f48 4000d032bf003505 0000000bd7ff1196 00000003b5c71196

The first field is the index of the entry in the HPT, the second and
third are the HPT entry, so the third entry contains the real page
number that is mapped by the entry if the entry's valid bit is set.
The fourth field is the guest's view of the second doubleword of the
entry, so it contains the guest physical address.  (The format of the
second through fourth fields are described in the Power ISA and also
in arch/powerpc/include/asm/mmu-hash64.h.)
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

We don't support real-mode areas now that 970 support is removed.
Remove the remaining details of rma from the code.  Also rename
rma_setup_done to hpte_setup_done to better reflect the changes.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

On POWER, storage caching is usually configured via the MMU - attributes
such as cache-inhibited are stored in the TLB and the hashed page table.

This makes correctly performing cache inhibited IO accesses awkward when
the MMU is turned off (real mode).  Some CPU models provide special
registers to control the cache attributes of real mode load and stores but
this is not at all consistent.  This is a problem in particular for SLOF,
the firmware used on KVM guests, which runs entirely in real mode, but
which needs to do IO to load the kernel.

To simplify this qemu implements two special hypercalls, H_LOGICAL_CI_LOAD
and H_LOGICAL_CI_STORE which simulate a cache-inhibited load or store to
a logical address (aka guest physical address).  SLOF uses these for IO.

However, because these are implemented within qemu, not the host kernel,
these bypass any IO devices emulated within KVM itself.  The simplest way
to see this problem is to attempt to boot a KVM guest from a virtio-blk
device with iothread / dataplane enabled.  The iothread code relies on an
in kernel implementation of the virtio queue notification, which is not
triggered by the IO hcalls, and so the guest will stall in SLOF unable to
load the guest OS.

This patch addresses this by providing in-kernel implementations of the
2 hypercalls, which correctly scan the KVM IO bus.  Any access to an
address not handled by the KVM IO bus will cause a VM exit, hitting the
qemu implementation as before.

Note that a userspace change is also required, in order to enable these
new hcall implementations with KVM_CAP_PPC_ENABLE_HCALL.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
[agraf: fix compilation]
Signed-off-by: NAlexander Graf <agraf@suse.de>

The VPA (virtual processor area) is defined by PAPR and is therefore
big-endian, so we need a be32_to_cpu when reading it in
kvmppc_get_yield_count().  Without this, H_CONFER always fails on a
little-endian host, causing SMP guests to waste time spinning on
spinlocks.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Currently, kvmppc_set_lpcr() has a spinlock around the whole function,
and inside that does mutex_lock(&kvm->lock).  It is not permitted to
take a mutex while holding a spinlock, because the mutex_lock might
call schedule().  In addition, this causes lockdep to warn about a
lock ordering issue:

======================================================
[ INFO: possible circular locking dependency detected ]
3.18.0-kvm-04645-gdfea862-dirty #131 Not tainted
-------------------------------------------------------
qemu-system-ppc/8179 is trying to acquire lock:
 (&kvm->lock){+.+.+.}, at: [<d00000000ecc1f54>] .kvmppc_set_lpcr+0xf4/0x1c0 [kvm_hv]

but task is already holding lock:
 (&(&vcore->lock)->rlock){+.+...}, at: [<d00000000ecc1ea0>] .kvmppc_set_lpcr+0x40/0x1c0 [kvm_hv]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&(&vcore->lock)->rlock){+.+...}:
       [<c000000000b3c120>] .mutex_lock_nested+0x80/0x570
       [<d00000000ecc7a14>] .kvmppc_vcpu_run_hv+0xc4/0xe40 [kvm_hv]
       [<d00000000eb9f5cc>] .kvmppc_vcpu_run+0x2c/0x40 [kvm]
       [<d00000000eb9cb24>] .kvm_arch_vcpu_ioctl_run+0x54/0x160 [kvm]
       [<d00000000eb94478>] .kvm_vcpu_ioctl+0x4a8/0x7b0 [kvm]
       [<c00000000026cbb4>] .do_vfs_ioctl+0x444/0x770
       [<c00000000026cfa4>] .SyS_ioctl+0xc4/0xe0
       [<c000000000009264>] syscall_exit+0x0/0x98

-> #0 (&kvm->lock){+.+.+.}:
       [<c0000000000ff28c>] .lock_acquire+0xcc/0x1a0
       [<c000000000b3c120>] .mutex_lock_nested+0x80/0x570
       [<d00000000ecc1f54>] .kvmppc_set_lpcr+0xf4/0x1c0 [kvm_hv]
       [<d00000000ecc510c>] .kvmppc_set_one_reg_hv+0x4dc/0x990 [kvm_hv]
       [<d00000000eb9f234>] .kvmppc_set_one_reg+0x44/0x330 [kvm]
       [<d00000000eb9c9dc>] .kvm_vcpu_ioctl_set_one_reg+0x5c/0x150 [kvm]
       [<d00000000eb9ced4>] .kvm_arch_vcpu_ioctl+0x214/0x2c0 [kvm]
       [<d00000000eb940b0>] .kvm_vcpu_ioctl+0xe0/0x7b0 [kvm]
       [<c00000000026cbb4>] .do_vfs_ioctl+0x444/0x770
       [<c00000000026cfa4>] .SyS_ioctl+0xc4/0xe0
       [<c000000000009264>] syscall_exit+0x0/0x98

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&(&vcore->lock)->rlock);
                               lock(&kvm->lock);
                               lock(&(&vcore->lock)->rlock);
  lock(&kvm->lock);

 *** DEADLOCK ***

2 locks held by qemu-system-ppc/8179:
 #0:  (&vcpu->mutex){+.+.+.}, at: [<d00000000eb93f18>] .vcpu_load+0x28/0x90 [kvm]
 #1:  (&(&vcore->lock)->rlock){+.+...}, at: [<d00000000ecc1ea0>] .kvmppc_set_lpcr+0x40/0x1c0 [kvm_hv]

stack backtrace:
CPU: 4 PID: 8179 Comm: qemu-system-ppc Not tainted 3.18.0-kvm-04645-gdfea862-dirty #131
Call Trace:
[c000001a66c0f310] [c000000000b486ac] .dump_stack+0x88/0xb4 (unreliable)
[c000001a66c0f390] [c0000000000f8bec] .print_circular_bug+0x27c/0x3d0
[c000001a66c0f440] [c0000000000fe9e8] .__lock_acquire+0x2028/0x2190
[c000001a66c0f5d0] [c0000000000ff28c] .lock_acquire+0xcc/0x1a0
[c000001a66c0f6a0] [c000000000b3c120] .mutex_lock_nested+0x80/0x570
[c000001a66c0f7c0] [d00000000ecc1f54] .kvmppc_set_lpcr+0xf4/0x1c0 [kvm_hv]
[c000001a66c0f860] [d00000000ecc510c] .kvmppc_set_one_reg_hv+0x4dc/0x990 [kvm_hv]
[c000001a66c0f8d0] [d00000000eb9f234] .kvmppc_set_one_reg+0x44/0x330 [kvm]
[c000001a66c0f960] [d00000000eb9c9dc] .kvm_vcpu_ioctl_set_one_reg+0x5c/0x150 [kvm]
[c000001a66c0f9f0] [d00000000eb9ced4] .kvm_arch_vcpu_ioctl+0x214/0x2c0 [kvm]
[c000001a66c0faf0] [d00000000eb940b0] .kvm_vcpu_ioctl+0xe0/0x7b0 [kvm]
[c000001a66c0fcb0] [c00000000026cbb4] .do_vfs_ioctl+0x444/0x770
[c000001a66c0fd90] [c00000000026cfa4] .SyS_ioctl+0xc4/0xe0
[c000001a66c0fe30] [c000000000009264] syscall_exit+0x0/0x98

This fixes it by moving the mutex_lock()/mutex_unlock() pair outside
the spin-locked region.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Currently the H_CONFER hcall is implemented in kernel virtual mode,
meaning that whenever a guest thread does an H_CONFER, all the threads
in that virtual core have to exit the guest.  This is bad for
performance because it interrupts the other threads even if they
are doing useful work.

The H_CONFER hcall is called by a guest VCPU when it is spinning on a
spinlock and it detects that the spinlock is held by a guest VCPU that
is currently not running on a physical CPU.  The idea is to give this
VCPU's time slice to the holder VCPU so that it can make progress
towards releasing the lock.

To avoid having the other threads exit the guest unnecessarily,
we add a real-mode implementation of H_CONFER that checks whether
the other threads are doing anything.  If all the other threads
are idle (i.e. in H_CEDE) or trying to confer (i.e. in H_CONFER),
it returns H_TOO_HARD which causes a guest exit and allows the
H_CONFER to be handled in virtual mode.

Otherwise it spins for a short time (up to 10 microseconds) to give
other threads the chance to observe that this thread is trying to
confer.  The spin loop also terminates when any thread exits the guest
or when all other threads are idle or trying to confer.  If the
timeout is reached, the H_CONFER returns H_SUCCESS.  In this case the
guest VCPU will recheck the spinlock word and most likely call
H_CONFER again.

This also improves the implementation of the H_CONFER virtual mode
handler.  If the VCPU is part of a virtual core (vcore) which is
runnable, there will be a 'runner' VCPU which has taken responsibility
for running the vcore.  In this case we yield to the runner VCPU
rather than the target VCPU.

We also introduce a check on the target VCPU's yield count: if it
differs from the yield count passed to H_CONFER, the target VCPU
has run since H_CONFER was called and may have already released
the lock.  This check is required by PAPR.
Signed-off-by: NSam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

There are two ways in which a guest instruction can be obtained from
the guest in the guest exit code in book3s_hv_rmhandlers.S.  If the
exit was caused by a Hypervisor Emulation interrupt (i.e. an illegal
instruction), the offending instruction is in the HEIR register
(Hypervisor Emulation Instruction Register).  If the exit was caused
by a load or store to an emulated MMIO device, we load the instruction
from the guest by turning data relocation on and loading the instruction
with an lwz instruction.

Unfortunately, in the case where the guest has opposite endianness to
the host, these two methods give results of different endianness, but
both get put into vcpu->arch.last_inst.  The HEIR value has been loaded
using guest endianness, whereas the lwz will load the instruction using
host endianness.  The rest of the code that uses vcpu->arch.last_inst
assumes it was loaded using host endianness.

To fix this, we define a new vcpu field to store the HEIR value.  Then,
in kvmppc_handle_exit_hv(), we transfer the value from this new field to
vcpu->arch.last_inst, doing a byte-swap if the guest and host endianness
differ.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This removes the code that was added to enable HV KVM to work
on PPC970 processors.  The PPC970 is an old CPU that doesn't
support virtualizing guest memory.  Removing PPC970 support also
lets us remove the code for allocating and managing contiguous
real-mode areas, the code for the !kvm->arch.using_mmu_notifiers
case, the code for pinning pages of guest memory when first
accessed and keeping track of which pages have been pinned, and
the code for handling H_ENTER hypercalls in virtual mode.

Book3S HV KVM is now supported only on POWER7 and POWER8 processors.
The KVM_CAP_PPC_RMA capability now always returns 0.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This patch adds trace points in the guest entry and exit code and also
for exceptions handled by the host in kernel mode - hypercalls and page
faults. The new events are added to /sys/kernel/debug/tracing/events
under a new subsystem called kvm_hv.
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NSuresh Warrier <warrier@linux.vnet.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Currently the calculations of stolen time for PPC Book3S HV guests
uses fields in both the vcpu struct and the kvmppc_vcore struct.  The
fields in the kvmppc_vcore struct are protected by the
vcpu->arch.tbacct_lock of the vcpu that has taken responsibility for
running the virtual core.  This works correctly but confuses lockdep,
because it sees that the code takes the tbacct_lock for a vcpu in
kvmppc_remove_runnable() and then takes another vcpu's tbacct_lock in
vcore_stolen_time(), and it thinks there is a possibility of deadlock,
causing it to print reports like this:

=============================================
[ INFO: possible recursive locking detected ]
3.18.0-rc7-kvm-00016-g8db4bc6 #89 Not tainted
---------------------------------------------
qemu-system-ppc/6188 is trying to acquire lock:
 (&(&vcpu->arch.tbacct_lock)->rlock){......}, at: [<d00000000ecb1fe8>] .vcore_stolen_time+0x48/0xd0 [kvm_hv]

but task is already holding lock:
 (&(&vcpu->arch.tbacct_lock)->rlock){......}, at: [<d00000000ecb25a0>] .kvmppc_remove_runnable.part.3+0x30/0xd0 [kvm_hv]

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&vcpu->arch.tbacct_lock)->rlock);
  lock(&(&vcpu->arch.tbacct_lock)->rlock);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

3 locks held by qemu-system-ppc/6188:
 #0:  (&vcpu->mutex){+.+.+.}, at: [<d00000000eb93f98>] .vcpu_load+0x28/0xe0 [kvm]
 #1:  (&(&vcore->lock)->rlock){+.+...}, at: [<d00000000ecb41b0>] .kvmppc_vcpu_run_hv+0x530/0x1530 [kvm_hv]
 #2:  (&(&vcpu->arch.tbacct_lock)->rlock){......}, at: [<d00000000ecb25a0>] .kvmppc_remove_runnable.part.3+0x30/0xd0 [kvm_hv]

stack backtrace:
CPU: 40 PID: 6188 Comm: qemu-system-ppc Not tainted 3.18.0-rc7-kvm-00016-g8db4bc6 #89
Call Trace:
[c000000b2754f3f0] [c000000000b31b6c] .dump_stack+0x88/0xb4 (unreliable)
[c000000b2754f470] [c0000000000faeb8] .__lock_acquire+0x1878/0x2190
[c000000b2754f600] [c0000000000fbf0c] .lock_acquire+0xcc/0x1a0
[c000000b2754f6d0] [c000000000b2954c] ._raw_spin_lock_irq+0x4c/0x70
[c000000b2754f760] [d00000000ecb1fe8] .vcore_stolen_time+0x48/0xd0 [kvm_hv]
[c000000b2754f7f0] [d00000000ecb25b4] .kvmppc_remove_runnable.part.3+0x44/0xd0 [kvm_hv]
[c000000b2754f880] [d00000000ecb43ec] .kvmppc_vcpu_run_hv+0x76c/0x1530 [kvm_hv]
[c000000b2754f9f0] [d00000000eb9f46c] .kvmppc_vcpu_run+0x2c/0x40 [kvm]
[c000000b2754fa60] [d00000000eb9c9a4] .kvm_arch_vcpu_ioctl_run+0x54/0x160 [kvm]
[c000000b2754faf0] [d00000000eb94538] .kvm_vcpu_ioctl+0x498/0x760 [kvm]
[c000000b2754fcb0] [c000000000267eb4] .do_vfs_ioctl+0x444/0x770
[c000000b2754fd90] [c0000000002682a4] .SyS_ioctl+0xc4/0xe0
[c000000b2754fe30] [c0000000000092e4] syscall_exit+0x0/0x98

In order to make the locking easier to analyse, we change the code to
use a spinlock in the kvmppc_vcore struct to protect the stolen_tb and
preempt_tb fields.  This lock needs to be an irq-safe lock since it is
used in the kvmppc_core_vcpu_load_hv() and kvmppc_core_vcpu_put_hv()
functions, which are called with the scheduler rq lock held, which is
an irq-safe lock.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The kvmppc_vcore_blocked() code does not check for the wait condition
after putting the process on the wait queue. This means that it is
possible for an external interrupt to become pending, but the vcpu to
remain asleep until the next decrementer interrupt.  The fix is to
make one last check for pending exceptions and ceded state before
calling schedule().
Signed-off-by: NSuresh Warrier <warrier@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

When we get an HMI (hypervisor maintenance interrupt) while in a
guest, we see that guest enters into paused state.  The reason is, in
kvmppc_handle_exit_hv it falls through default path and returns to
host instead of resuming guest.  This causes guest to enter into
paused state.  HMI is a hypervisor only interrupt and it is safe to
resume the guest since the host has handled it already.  This patch
adds a switch case to resume the guest.

Without this patch we see guest entering into paused state with following
console messages:

[ 3003.329351] Severe Hypervisor Maintenance interrupt [Recovered]
[ 3003.329356]  Error detail: Timer facility experienced an error
[ 3003.329359] 	HMER: 0840000000000000
[ 3003.329360] 	TFMR: 4a12000980a84000
[ 3003.329366] vcpu c0000007c35094c0 (40):
[ 3003.329368] pc  = c0000000000c2ba0  msr = 8000000000009032  trap = e60
[ 3003.329370] r 0 = c00000000021ddc0  r16 = 0000000000000046
[ 3003.329372] r 1 = c00000007a02bbd0  r17 = 00003ffff27d5d98
[ 3003.329375] r 2 = c0000000010980b8  r18 = 00001fffffc9a0b0
[ 3003.329377] r 3 = c00000000142d6b8  r19 = c00000000142d6b8
[ 3003.329379] r 4 = 0000000000000002  r20 = 0000000000000000
[ 3003.329381] r 5 = c00000000524a110  r21 = 0000000000000000
[ 3003.329383] r 6 = 0000000000000001  r22 = 0000000000000000
[ 3003.329386] r 7 = 0000000000000000  r23 = c00000000524a110
[ 3003.329388] r 8 = 0000000000000000  r24 = 0000000000000001
[ 3003.329391] r 9 = 0000000000000001  r25 = c00000007c31da38
[ 3003.329393] r10 = c0000000014280b8  r26 = 0000000000000002
[ 3003.329395] r11 = 746f6f6c2f68656c  r27 = c00000000524a110
[ 3003.329397] r12 = 0000000028004484  r28 = c00000007c31da38
[ 3003.329399] r13 = c00000000fe01400  r29 = 0000000000000002
[ 3003.329401] r14 = 0000000000000046  r30 = c000000003011e00
[ 3003.329403] r15 = ffffffffffffffba  r31 = 0000000000000002
[ 3003.329404] ctr = c00000000041a670  lr  = c000000000272520
[ 3003.329405] srr0 = c00000000007e8d8 srr1 = 9000000000001002
[ 3003.329406] sprg0 = 0000000000000000 sprg1 = c00000000fe01400
[ 3003.329407] sprg2 = c00000000fe01400 sprg3 = 0000000000000005
[ 3003.329408] cr = 48004482  xer = 2000000000000000  dsisr = 42000000
[ 3003.329409] dar = 0000010015020048
[ 3003.329410] fault dar = 0000010015020048 dsisr = 42000000
[ 3003.329411] SLB (8 entries):
[ 3003.329412]   ESID = c000000008000000 VSID = 40016e7779000510
[ 3003.329413]   ESID = d000000008000001 VSID = 400142add1000510
[ 3003.329414]   ESID = f000000008000004 VSID = 4000eb1a81000510
[ 3003.329415]   ESID = 00001f000800000b VSID = 40004fda0a000d90
[ 3003.329416]   ESID = 00003f000800000c VSID = 400039f536000d90
[ 3003.329417]   ESID = 000000001800000d VSID = 0001251b35150d90
[ 3003.329417]   ESID = 000001000800000e VSID = 4001e46090000d90
[ 3003.329418]   ESID = d000080008000019 VSID = 40013d349c000400
[ 3003.329419] lpcr = c048800001847001 sdr1 = 0000001b19000006 last_inst = ffffffff
[ 3003.329421] trap=0xe60 | pc=0xc0000000000c2ba0 | msr=0x8000000000009032
[ 3003.329524] Severe Hypervisor Maintenance interrupt [Recovered]
[ 3003.329526]  Error detail: Timer facility experienced an error
[ 3003.329527] 	HMER: 0840000000000000
[ 3003.329527] 	TFMR: 4a12000980a94000
[ 3006.359786] Severe Hypervisor Maintenance interrupt [Recovered]
[ 3006.359792]  Error detail: Timer facility experienced an error
[ 3006.359795] 	HMER: 0840000000000000
[ 3006.359797] 	TFMR: 4a12000980a84000

 Id    Name                           State
----------------------------------------------------
 2     guest2                         running
 3     guest3                         paused
 4     guest4                         running
Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This patch adds kernel side support for software breakpoint.
Design is that, by using an illegal instruction, we trap to hypervisor
via Emulation Assistance interrupt, where we check for the illegal instruction
and accordingly we return to Host or Guest. Patch also adds support for
software breakpoint in PR KVM.
Signed-off-by: NMadhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Since the guest can read the machine's PVR (Processor Version Register)
directly and see the real value, we should disallow userspace from
setting any value for the guest's PVR other than the real host value.
Therefore this makes kvm_arch_vcpu_set_sregs_hv() check the supplied
PVR value and return an error if it is different from the host value,
which has been put into vcpu->arch.pvr at vcpu creation time.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Occasional failures have been seen with split-core mode and migration
where the message "KVM: couldn't grab cpu" appears.  This increases
the length of time that we wait from 1ms to 10ms, which seems to
work around the issue.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

When calculating the lower bits of AVA field, use the shift
count based on the base page size. Also add the missing segment
size and remove stale comment.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>