- 22 1月, 2018 9 次提交
-
-
由 Igor Russkikh 提交于
These ops are not related to HW and are now implemented in pci module. Thus, remove these ops pointers and implementation. Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Igor Russkikh 提交于
Driver contained a dead code of maintaining multiple pci port instances. That will never be used since for each pci function a separate NIC instance is created. Simplify this, making pci module only responsible for pci resource management. NIC initialization is also simplified accordingly. Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Igor Russkikh 提交于
This removes unnecessary structure copying, and prepares the driver for separate firmware ops table introduction. We also remove extra copy of capabilities structure (which is const actually) and also replace it with a const pointer in aq_nic_cfg. Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Igor Russkikh 提交于
A number of new AQC devices is going to be released. To support more flexible capabilities management a number of static caps instances is now declared. Devices now are mainly differs by supported speeds, but in future more parameters will be customized. A set of AQC100 devices have fibre media, not twisted pair - this is also reflected in new capabilities definitions. HW level also now directly exports hw_ops for each of A0/B0 hardware. PCI configuration now uses a device configuration table where each device ID is explicitly mapped with hardware OPs and capabilities structures. Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Igor Russkikh 提交于
New set of aquantia devices has an upgraded hardware (B1). The hardware interface is identical to B0. The difference will be in firmware which is incompatible with old one. Reorganized and removed duplicate speed and devid definitions Introduced explicit flow control configuration defines Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux由 David S. Miller 提交于
Saeed Mahameed says: ==================== mlx5-updates-2018-01-19 From: Or Gerlitz <ogerlitz@mellanox.com> ======= First six patches of this series further enhances the mlx5 hairpin support. The first two patches deal with using different hairpin instances for flows whose packets have different priorities to align with the port TX QoS model. The next four patches allow us to do HW spreading of flows over a set of hairpin pairs using RSS. The last two patches change the driver to also set the size of the HW hairpin queues. ======== Next four patches from Eran Ben Elisha <eranbe@mellanox.com>: Add more debug data for TX timeout handling, and further enhance and optimize TX timeout handling upon lost interrupts, which adds a mechanism for explicitly polling EQ in case of a TX timeout in order to recover from a lost interrupt. If this is not the case (no pending EQEs), perform a channels full recovery as usual. From Kamal Heib <kamalh@mellanox.com>, Two patches to extend the stats group API to have an update_stats() callback which will be used to fetch the hardware or software counters data, this will improve the current API and reduce code duplication. From Gal Pressman <galp@mellanox.com>, Last patch, Add likely to the common RX checksum flow. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pieter Jansen van Vuuren 提交于
Previously it was possible to interrupt processing stats updates because they were handled in a work queue. Interrupting the stats updates could lead to a situation where we backup the control message queue. This patch moves the stats update processing out of the work queue to be processed as soon as hardware sends a request. Reported-by: NLouis Peens <louis.peens@netronome.com> Signed-off-by: NPieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Walleij 提交于
The zeroday builder notices that since Usermode Linux does not have IO memory, the build fails for them when selecting everything it can enable. As the driver is clearly using memory-mapped registers to access the network adapter, we add depends on HAS_IOMEM to solve this problem. Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next由 David S. Miller 提交于
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for your net-next tree. Basically, a new extension for ip6tables, simplification work of nf_tables that saves us 500 LoC, allow raw table registration before defragmentation, conversion of the SNMP helper to use the ASN.1 code generator, unique 64-bit handle for all nf_tables objects and fixes to address fallout from previous nf-next batch. More specifically, they are: 1) Seven patches to remove family abstraction layer (struct nft_af_info) in nf_tables, this simplifies our codebase and it saves us 64 bytes per net namespace. 2) Add IPv6 segment routing header matching for ip6tables, from Ahmed Abdelsalam. 3) Allow to register iptable_raw table before defragmentation, some people do not want to waste cycles on defragmenting traffic that is going to be dropped, hence add a new module parameter to enable this behaviour in iptables and ip6tables. From Subash Abhinov Kasiviswanathan. This patch needed a couple of follow up patches to get things tidy from Arnd Bergmann. 4) SNMP helper uses the ASN.1 code generator, from Taehee Yoo. Several patches for this helper to prepare this change are also part of this patch series. 5) Add 64-bit handles to uniquely objects in nf_tables, from Harsha Sharma. 6) Remove log message that several netfilter subsystems print at boot/load time. 7) Restore x_tables module autoloading, that got broken in a previous patch to allow singleton NAT hook callback registration per hook spot, from Florian Westphal. Moreover, return EBUSY to report that the singleton NAT hook slot is already in instead. 8) Several fixes for the new nf_tables flowtable representation, including incorrect error check after nf_tables_flowtable_lookup(), missing Kconfig dependencies that lead to build breakage and missing initialization of priority and hooknum in flowtable object. 9) Missing NETFILTER_FAMILY_ARP dependency in Kconfig for the clusterip target. This is due to recent updates in the core to shrink the hook array size and compile it out if no specific family is enabled via .config file. Patch from Florian Westphal. 10) Remove duplicated include header files, from Wei Yongjun. 11) Sparse warning fix for the NFPROTO_INET handling from the core due to missing static function definition, also from Wei Yongjun. 12) Restore ICMPv6 Parameter Problem error reporting when defragmentation fails, from Subash Abhinov Kasiviswanathan. 13) Remove obsolete owner field initialization from struct file_operations, patch from Alexey Dobriyan. 14) Use boolean datatype where needed in the Netfilter codebase, from Gustavo A. R. Silva. 15) Remove double semicolon in dynset nf_tables expression, from Luis de Bethencourt. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 1月, 2018 1 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next由 David S. Miller 提交于
Alexei Starovoitov says: ==================== pull-request: bpf-next 2018-01-19 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) bpf array map HW offload, from Jakub. 2) support for bpf_get_next_key() for LPM map, from Yonghong. 3) test_verifier now runs loaded programs, from Alexei. 4) xdp cpumap monitoring, from Jesper. 5) variety of tests, cleanups and small x64 JIT optimization, from Daniel. 6) user space can now retrieve HW JITed program, from Jiong. Note there is a minor conflict between Russell's arm32 JIT fixes and removal of bpf_jit_enable variable by Daniel which should be resolved by keeping Russell's comment and removing that variable. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 1月, 2018 30 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 David S. Miller 提交于
The BPF verifier conflict was some minor contextual issue. The TUN conflict was less trivial. Cong Wang fixed a memory leak of tfile->tx_array in 'net'. This is an skb_array. But meanwhile in net-next tun changed tfile->tx_arry into tfile->tx_ring which is a ptr_ring. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexei Starovoitov 提交于
Daniel Borkmann says: ==================== This series adds various misc improvements to BPF: detection of BPF helper definition misconfiguration for mem/size argument pairs, csum_diff helper also for XDP, various test cases, removal of the recently added pure_initcall(), restriction of the jit sysctls to cap_sys_admin for initns, a minor size improvement for x86 jit in alu ops, output of complexity limit to verifier log and last but not least having the event output more flexible with moving to const_size_or_zero type. Thanks! ==================== Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
Similar rationale as in a60dd35d ("bpf: change bpf_perf_event_output arg5 type to ARG_CONST_SIZE_OR_ZERO"), change the type to CONST_SIZE_OR_ZERO such that we can better deal with optimized code. No changes needed in bpf_event_output() as it can also deal with 0 size entirely (e.g. as only wake-up signal with empty frame in perf RB, or packet dumps w/o meta data as another such possibility). Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
Given the limit could potentially get further adjustments in the future, add it to the log so it becomes obvious what the current limit is w/o having to check the source first. This may also be helpful for debugging complexity related issues on kernels that backport from upstream. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
For the BPF_REG_0 (BPF_REG_A in cBPF, respectively), we can use the short form of the opcode as dst mapping is on eax/rax and thus save a byte per such operation. Added to add/sub/and/or/xor for 32/64 bit when K immediate is used. There may be more such low-hanging fruit to add in future as well. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
Given BPF reaches far beyond just networking these days, it was never intended to allow setting and in some cases reading those knobs out of a user namespace root running without CAP_SYS_ADMIN, thus tighten such access. Also the bpf_jit_enable = 2 debugging mode should only be allowed if kptr_restrict is not set since it otherwise can leak addresses to the kernel log. Dump a note to the kernel log that this is for debugging JITs only when enabled. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
Having a pure_initcall() callback just to permanently enable BPF JITs under CONFIG_BPF_JIT_ALWAYS_ON is unnecessary and could leave a small race window in future where JIT is still disabled on boot. Since we know about the setting at compilation time anyway, just initialize it properly there. Also consolidate all the individual bpf_jit_enable variables into a single one and move them under one location. Moreover, don't allow for setting unspecified garbage values on them. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
Add couple of missing test cases for eBPF div/mod by zero to the new test_verifier prog runtime feature. Also one for an empty prog and only exit. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
Add a couple of test cases for interpreter and JIT that are related to an issue we faced some time ago in Cilium [1], which is fixed in LLVM with commit e53750e1e086 ("bpf: fix bug on silently truncating 64-bit immediate"). Test cases were run-time checking kernel to behave as intended which should also provide some guidance for current or new JITs in case they should trip over this. Added for cBPF and eBPF. [1] https://github.com/cilium/cilium/pull/2162Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
Useful for porting cls_bpf programs w/o increasing program complexity limits much at the same time, so add the helper to XDP as well. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
I've seen two patch proposals now for helper additions that used ARG_PTR_TO_MEM or similar in reg_X but no corresponding ARG_CONST_SIZE in reg_X+1. Verifier won't complain in such case, but it will omit verifying the memory passed to the helper thus ending up badly. Detect such buggy helper function signature and bail out during verification rather than finding them through review. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Jesper Dangaard Brouer 提交于
The xdp_redirect_cpu sample have some "builtin" monitoring of the tracepoints for xdp_cpumap_*, but it is practical to have an external tool that can monitor these transpoint as an easy way to troubleshoot an application using XDP + cpumap. Specifically I need such external tool when working on Suricata and XDP cpumap redirect. Extend the xdp_monitor tool sample with monitoring of these xdp_cpumap_* tracepoints. Model the output format like xdp_redirect_cpu. Given I needed to handle per CPU decoding for cpumap, this patch also add per CPU info on the existing monitor events. This resembles part of the builtin monitoring output from sample xdp_rxq_info. Thus, also covering part of that sample in an external monitoring tool. Performance wise, the cpumap tracepoints uses bulking, which cause them to have very little overhead. Thus, they are enabled by default. Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Daniel Borkmann 提交于
Yonghong Song says: ==================== This patch set implements MAP_GET_NEXT_KEY command for LPM_TRIE map. This command is really useful for key enumeration, and for key deletion if what keys in the trie are unknown. Patch #1 implements the functionality in the kernel and patch #2 adds a test case in tools/testing/selftests/bpf. ==================== Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Yonghong Song 提交于
A test case is added in tools/testing/selftests/bpf/test_lpm_map.c for MAP_GET_NEXT_KEY command. A four node trie, which is described in kernel/bpf/lpm_trie.c, is built and the MAP_GET_NEXT_KEY results are checked. Signed-off-by: NYonghong Song <yhs@fb.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Yonghong Song 提交于
Current LPM_TRIE map type does not implement MAP_GET_NEXT_KEY command. This command is handy when users want to enumerate keys. Otherwise, a different map which supports key enumeration may be required to store the keys. If the map data is sparse and all map data are to be deleted without closing file descriptor, using MAP_GET_NEXT_KEY to find all keys is much faster than enumerating all key space. This patch implements MAP_GET_NEXT_KEY command for LPM_TRIE map. If user provided key pointer is NULL or the key does not have an exact match in the trie, the first key will be returned. Otherwise, the next key will be returned. In this implemenation, key enumeration follows a postorder traversal of internal trie. More specific keys will be returned first than less specific ones, given a sequence of MAP_GET_NEXT_KEY syscalls. Signed-off-by: NYonghong Song <yhs@fb.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Shuah Khan 提交于
Update .gitignore with missing generated files. Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Roman Gushchin 提交于
Add BPF_MAP_TYPE_CPUMAP map type to the list of map type recognized by bpftool and define corresponding text representation. Signed-off-by: NRoman Gushchin <guro@fb.com> Cc: Quentin Monnet <quentin.monnet@netronome.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@kernel.org> Acked-by: NQuentin Monnet <quentin.monnet@netronome.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 David S. Miller 提交于
Andrew Lunn says: ==================== ATU and VTU irq fixes Further testing and code review found two sets of bugs. Core review found a cut/paste error in the irq setup code. A board which does not have an interrupt line from the switch to the SoC, and experiancing an EPROBE_DEFER throw a splat when the ATU irq was freed but never registered. v2: Fix typ0 chip->chip->vtu_prob_irq to chip->vtu_prob_irq 0-day compile testing. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Lunn 提交于
We only register the ATU and VTU irq when we have a chip level IRQ. In the error path, we should only attempt to remove the ATU and VTU irq if we also have a chip level IRQ. Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Lunn 提交于
Fix a cut/paste error. When irq_find_mapping() returns an error for the ATU or VTU interrupt, return that error, not the value of chip->device_irq. Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Alexander Aring says: ==================== net: sched: cls: add extack support this patch adds extack support for TC classifier subsystem. The first patch fixes some code style issues for this patch series pointed out by checkpatch. The other patches until the last one prepares extack handling for the TC classifier subsystem and handle generic extack errors. The last patch is an example for u32 classifier to add extack support inside the callbacks delete and change. There exists a init callback as well, but most classifier implementation run a kalloc() once to allocate something. Not necessary _yet_ to add extack support now. - Alex Cc: David Ahern <dsahern@gmail.com> changes since v3: - fix accidentally move of config option mismatch message in PATCH 2/8 correct one is 4/8, detected by kbuildbot (Thank you) - Removed patch "net: sched: cls: add extack support for tc_setup_cb_call" PATCH 7/8 in version v2 as suggested by Jakub Kicinski (Thank you) - changed NL_SET_ERR_MSG to NL_SET_ERR_MSG_MOD as suggested by Jakub Kicinski in u32 cls (Thank You) - Removed text from cover letter that I was waiting for Jiri's Patches as detected by Jamal Hadi Salim (Thank you). changes since v2: - rebased on Jiri's patches (Thank you) - several spelling fixes pointed out by Cong Wang (Thank you) - several spelling fixes pointed out by David Ahern (Thank you) - use David Ahern recommendation if config option is mismatch, but combine it with Cong Wang recommendation to put config name into it (Thank you) ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Aring 提交于
This patch adds extack support for the u32 classifier as example for delete and init callback. Cc: David Ahern <dsahern@gmail.com> Signed-off-by: NAlexander Aring <aring@mojatatu.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Aring 提交于
This patch adds extack handling for the tcf_change_indev function which is common used by TC classifier implementations. Cc: David Ahern <dsahern@gmail.com> Signed-off-by: NAlexander Aring <aring@mojatatu.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Aring 提交于
This patch adds extack support for classifier delete callback api. This prepares to handle extack support inside each specific classifier implementation. Cc: David Ahern <dsahern@gmail.com> Signed-off-by: NAlexander Aring <aring@mojatatu.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Aring 提交于
The tcf_exts_validate function calls the act api change callback. For preparing extack support for act api, this patch adds the extack as parameter for this function which is common used in cls implementations. Furthermore the tcf_exts_validate will call action init callback which prepares the TC action subsystem for extack support. Cc: David Ahern <dsahern@gmail.com> Signed-off-by: NAlexander Aring <aring@mojatatu.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Aring 提交于
This patch adds extack support for classifier change callback api. This prepares to handle extack support inside each specific classifier implementation. Cc: David Ahern <dsahern@gmail.com> Signed-off-by: NAlexander Aring <aring@mojatatu.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Aring 提交于
This patch adds extack support for generic cls handling. The extack will be set deeper to each called function which is not part of netdev core api. Cc: David Ahern <dsahern@gmail.com> Signed-off-by: NAlexander Aring <aring@mojatatu.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Aring 提交于
This patch changes some code style issues pointed out by checkpatch inside the TC cls subsystem. Signed-off-by: NAlexander Aring <aring@mojatatu.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
During initialization the driver checks whether the flashed FW image suits its requirements by checking that it's sufficiently new. However, there's only a weak backward compatibility scheme that is actually guaranteed by the FW, so driver must also upper bound the version to prevent compatibility issues between current driver and some possible future fw. Signed-off-by: NYuval Mintz <yuvalm@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jakub Kicinski says: ==================== nfp: devlink, capabilities extensions and updates This series starts with an improvement to the usability of the device memory accessors (CPP transactions). Next few patches are devoted to fixing the devlink locking. After recent patches for mlxsw the locking scheme of devlink ops has to be reworked. Following patches improve NFP code dealing with "representors", and expands the error message printed when driver has no support for loaded FW. Second part of the series is focused on vNIC capabilities read from vNIC control memory (often referred to as "BAR0" for historical reasons). TLV capability format is established and immediately made use of. The next patches rework parsing of features for control vNIC which allows apps to mask out features they don't want enabled. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-