Move the power well get/put/enable/disable hooks to the new
intel_display_power_well.c file. The motivation is to reduce the clutter
in intel_display_power.c, keeping the functionality related to power
domains in that file and moving the low-level power well functionality
to intel_display_power_well.c.

No functional change.
Suggested-by: NJani Nikula <jani.nikula@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NJouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222165137.1004194-6-imre.deak@intel.com

Move the i915_power_well_regs struct into i915_power_well_ops. Most of
the power wells use the same ops/regs combination, so this saves some
space and also simplifies the platform power domain->power well
definitions.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NJouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222165137.1004194-5-imre.deak@intel.com

Commit d5ce34da
("drm/i915: Add state verification for the TypeC port mode")
added a verification to the TypeC AUX power well enable()/disable()
hooks to check if the TypeC port related to this power well is properly
locked. If the disabling happens asynchronously the verification is
skipped, since in this case the port is unlocked. The detection of
asnychronous disabling doesn't work as intended though, since the power
well's reference count is always 0 when its disable() hook is called
(and since there won't be any domain reference held for this power well
either, the verification is always skipped); remove the verification
from the disable() hook for now. In the power well's enable() hook the
power well's reference will be always >0 and there won't be any
asynchronous disabling pending for it, so we can drop the async refcount
check from there.

No functional change.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NJouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222165137.1004194-4-imre.deak@intel.com

Instead of open-coding the call of the power wells' enable()/disable()
hooks use the corresponding helper functions. This will also ensure that
the power well's cached-enable state is always up-to-date. Luckily the
lack of this updating hasn't been a problem, since the state either
didn't change (in intel_display_power_set_target_dc_state()), or got
updated subsequently (for vlv_cmnlane_wa(), in the following
intel_power_domains_sync_hw()).
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NJouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222165137.1004194-3-imre.deak@intel.com

The POWER_DOMAIN_TRANSCODER() macro depends on the
POWER_DOMAIN_TRANSCODER_A/B .. DSI_A/C enum values to be consecutive,
move POWER_DOMAIN_TRANSCODER_VDSC_PW2 after these to ensure this. The
wrong order didn't cause a problem, since the DSI_A/C domains are in
always-on power wells on all relevant platforms. The same power well
ends up being enabled/disabled when the VDSC_PW2 domain is selected
incorrectly.

While at it add a code comment about enum values that need to stay
consecutive.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NJouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222165137.1004194-2-imre.deak@intel.com

Registers that exist within the MCH BAR and are mirrored into the GPU's
MMIO space are a good candidate to separate out into their own header.

For reference, the mirror of the MCH BAR starts at the following
locations in the graphics MMIO space (the end of the MCHBAR range
differs slightly on each platform):

 * Pre-gen6:           0x10000
 * Gen6-Gen11 + RKL:  0x140000

v2:
 - Create separate patch to swtich a few register definitions to be
   relative to the MCHBAR mirror base.
 - Drop upper bound of MCHBAR mirror from commit message; there are too
   many different combinations between various platforms to list out,
   and the documentation is spotty for the older pre-gen6 platforms
   anyway.

Bspec: 134, 51771
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220215061342.2055952-2-matthew.d.roper@intel.com

Make sure all unused power wells left enabled by BIOS get disabled
during driver loading and system resume.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5028Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202104249.2680843-1-imre.deak@intel.com

Gather some intel_dump_cdclk_config() changes together to avoid extra
churn: Rename to intel_cdclk_dump_config() to following naming
conventions. Pass in i915. Use i915 for struct drm_device based
logging. Switch to KMS drm debug class.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/80469a83a74912ad69c4518d9cc68f07d65e9aaf.1642769982.git.jani.nikula@intel.com

Prefer acronym-based naming to be in line with the rest of the driver.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220112111740.1208374-1-jani.nikula@intel.com

These registers are only needed in a couple files and on specific
platforms; let's keep them separate from the general register pool.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111051600.3429104-10-matthew.d.roper@intel.com

Collect the dipslay related mask under the display sub-structure
in intel_device_info.

Note that there is a slight change in behaviour in that we zero
out .display entirely when !HAS_DISPLAY (aka. pipe_mask==0), so
now we also zero out the other masks (although cpu_transocder_mask
should already be zero of pipe_mask is zero). abox_mask is
only used by the display core init when HAS_DISPLAY is true, so
the actual behaviour of the system shouldn't change despite the
zeroing of these masks.

There is a lot more display stuff directly in device info that
could be moved over. Maybe someone else will be inspired to do it...
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211210122726.12577-1-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>

Anything internal to the implementation should be hidden away. Move the
intel_display_power structs to the .c file.

Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211116171434.20516-4-jani.nikula@intel.com

The debugfs should have no special privileges to look into the
implementation guts. Move the actual debug printing of power domains to
intel_display_power.c.

Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211116171434.20516-3-jani.nikula@intel.com

MIPI DSI transcoder cannot be in video mode to support any of the
display C states.

Bspec: 49195 (For DC*co DSI transcoders cannot be in video mode)
Bspec: 49193 (Hardware does not support DC5 or DC6 with MIPI DSI enabled)
Bspec: 49188 (desc of DSI_DCSTATE_CTL talks about cmd mode PM control

v2: Align to the power domain ordering (Jani)
    Add bspec references (Imre)
Signed-off-by: NVandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019151435.20477-4-vandita.kulkarni@intel.com

Don't populate the read-only array states on the stack but instead it
static. Also makes the object code smaller.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210915112702.12783-1-colin.king@canonical.com

New workaround added to specification, requiring bit 15 of
GEN8_CHICKEN_DCPR_1 to be programed before power well 1 is enabled.

BSpec: 54369
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211028230449.115832-1-jose.souza@intel.com

This power domain to disable DC states will be used in places outside
of DPLL, so making the name more generic.

Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Reviewed-by: NCaz Yokoyama <caz.yokoyama@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020003558.222198-1-jose.souza@intel.com

Move the PCH refclk stuff (including all the LPT/WPT
iCLKIP/CLKOUT_DP things) to its own file.

We also suck in the mPHY programming from intel_fdi.c
since we're the only caller.

Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015071625.593-2-ville.syrjala@linux.intel.comReviewed-by: NDave Airlie <airlied@redhat.com>

The snb+ pcode mailbox code is not sideband, so split it out to a
separate file. As can be seen from the #include changes, very few places
use both sideband and pcode.

Code movement only.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/185deb18eb739e5ae019e27834b9997dcc1347bc.1634207064.git.jani.nikula@intel.com

The VLV/CHV sideband code is pretty distinct from the rest of the
sideband code. Split it out to new vlv_sideband.[ch].

Pure code movement with relevant #include changes, and a tiny checkpatch
fix on top.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/755ebbbaf01fc6d306b763b6ef60f45e671ba290.1634119597.git.jani.nikula@intel.com

Keep the functionality and the assert code together.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0229659fb8af6c91c774408c6f7bb8c4ff8735e3.1632992608.git.jani.nikula@intel.com

Instead of directly accessing the TypeC port internal struct members,
add/use helpers to retrieve the corresponding properties.

No functional change.

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921002313.1132357-6-imre.deak@intel.com

This adds wrappers around all the vtable callers so they are in
one place.

Suggested by Jani.
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c3dd7aaad039e76acde9dda7211468907aa657c0.1632869550.git.jani.nikula@intel.com

dispcnlunit1_cp_xosc_clkreq clock observed to be active on TGL-H platform
despite Wa_14010685332 original sequence,
thus blocks entry to deeper s0ix state.

The Tweaked Wa_14010685332 sequence fixes this issue, therefore use tweaked
Wa_14010685332 sequence for every PCH since PCH_CNP.

v2:
- removed RKL from comment and simplified condition. [Rodrigo]

Fixes: b896898c ("drm/i915: Tweaked Wa_14010685332 for PCHs used on gen11 platforms")
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210810113112.31739-2-anshuman.gupta@intel.com
(cherry picked from commit 8b46cc65)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

dispcnlunit1_cp_xosc_clkreq clock observed to be active on TGL-H platform
despite Wa_14010685332 original sequence,
thus blocks entry to deeper s0ix state.

The Tweaked Wa_14010685332 sequence fixes this issue, therefore use tweaked
Wa_14010685332 sequence for every PCH since PCH_CNP.

v2:
- removed RKL from comment and simplified condition. [Rodrigo]

Fixes: b896898c ("drm/i915: Tweaked Wa_14010685332 for PCHs used on gen11 platforms")
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210810113112.31739-2-anshuman.gupta@intel.com

DG1 and XE_PLD platforms has Audio MMIO/VERBS lies in PG0 power
well. Adjusting the power domain accordingly to
POWER_DOMAIN_AUDIO_MMIO for audio detection and
POWER_DOMAIN_AUDIO_PLAYBACK for audio playback.

While doing this it requires to use POWER_DOMAIN_AUDIO_MMIO
power domain instead of POWER_DOMAIN_AUDIO in crtc power domain mask
and POWER_DOMAIN_AUDIO_PLAYBACK with intel_display_power_{get, put}
to enable/disable display audio codec power.

It will save the power in use cases when DP/HDMI connectors
configured with PIPE_A without any audio playback.

v1: Changes since RFC
- changed power domain names. [Imre]
- Removed TC{3,6}, AUX_USBC{3,6} and TBT from DG1
  power well and PW_3 power domains. [Imre]
- Fixed the order of powe wells , power domains and its
  registration. [Imre]

v2:
- Not allowe DC states when AUDIO_MMIO domain enabled. [Imre]

v3:
- Squashes the commits of series to avoid build failure.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
[Fix typo in commit message and in AUDIO_PLAYBACK domain name]
Signed-off-by: NImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729121858.16897-2-anshuman.gupta@intel.com

The only real platform with DISPLAY_VER == 10 is GLK. We don't need to
handle CNL explicitly in intel_display_power.c.
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728215946.1573015-14-lucas.demarchi@intel.com

Initialization of the PHY is handled by the hardware/firmware, but the
driver should wait up to 25ms for the PHY to report that its calibration
has completed.

Bspec: 49189
Bspec: 50107
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMatt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723174239.1551352-28-matthew.d.roper@intel.com

Although the BW_BUDDY registers still exist, they are not used for
anything on DG2.  This change is expected to hold true for future dgpu's
too.

Bspec: 49218
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-17-matthew.d.roper@intel.com

On DG2 we're supposed to just wait 600us after programming the well
before moving on; there won't be an ack from the hardware.

Bspec: 49296
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-14-matthew.d.roper@intel.com

Workarounds are documented in the bspec with an exclusive upper bound
(i.e., a "fixed" stepping that no longer needs the workaround).  This
makes our driver's use of an inclusive upper bound for stepping ranges
confusing; the differing notation between code and bspec makes it very
easy for mistakes to creep in.

Let's switch the upper bound of our IS_{GT,DISP}_STEP macros over to use
an exclusive upper bound like the bspec does.  This also has the benefit
of helping make sure workarounds are properly handled for new minor
steppings that show up (e.g., an A1 between the A0 and B0 we already
knew about) --- if the new intermediate stepping pulls in hardware fixes
early, there will be an update to the workaround definition which lets
us know we need to change our code.  If the new stepping does not pull a
hardware fix earlier, then the new stepping will already be captured
properly by the "[begin, fix)" range in the code.

We'll probably need to be extra vigilant in code review of new
workarounds for the near future to make sure developers notice the new
semantics of workaround bounds.  But we just migrated a bunch of our
platforms from the IS_REVID bounds over to IS_{GT,DISP}_STEP, so people
are already adjusting to the new macros and now is a good time to make
this change too.

[mattrope: Split out display changes to apply through intel-next tree]
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717051426.4120328-8-matthew.d.roper@intel.com

Bspec: 53273
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717051426.4120328-6-matthew.d.roper@intel.com

Switch DG1 to use a revid->stepping table as we're trying to do on all
platforms going forward.

This removes the last use of IS_REVID() and REVID_FOREVER, so remove
those now-unused macros as well to prevent their accidental use on
future platforms.

v2:
 - Use COMMON_STEP() macro in table.  (Anusha)

Bspec: 44463
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-11-matthew.d.roper@intel.com

This workaround is also applicable to xelpd display so extending it.

Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713003854.143197-6-jose.souza@intel.com

This workaround is not needed for platforms with display 13.

Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713003854.143197-5-jose.souza@intel.com

This patch adds Pipe A plumbing to the already
existing parsing and loading functions which is
taken care of in the prep patches. Adding MAX_DMC_FW
to keep track for both Main and Pipe A DMC while loading
the respective blobs.

Also adding present field in dmc_info.
s/find_dmc_fw_offset/csr_set_dmc_fw_offset. While at it add
fw_info_matches_stepping() helper. CSR_PROGRAM() should now
take the starting address of the particular blob (Main or Pipe)
and not hardcode it.

v2: Add dmc_offset and start_mmioaddr fields for dmc_info struct.

v3: Add a missing corner cases of stepping-substepping combination in
fw_info_matches_stepping() helper.

v4: Add macro for start_mmioaddr for V1 package. Simplify code
in dmc_set_fw_offset (Lucas)

Cc: Souza, Jose <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210621191415.29823-3-anusha.srivatsa@intel.com

Fix the following coccicheck warning:

./drivers/gpu/drm/i915/display/intel_display_power.c:3081:1-28:
 duplicated argument to & or |

This commit fixes duplicate argument. It might be a typo.
But what I can do is to remove it now.
Signed-off-by: NWan Jiabing <wanjiabing@vivo.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210605032209.16111-1-wanjiabing@vivo.com

On ADL_P the power well->PHY mapping doesn't follow the mapping on previous
platforms, fix this up.

While at it remove the redundant dev_priv param from
icl_tc_phy_aux_ch().
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526143729.2563672-3-imre.deak@intel.com

It's possible that an already dequeued put_async_work() will release the
reference (*) that was put asynchronously after the dequeue happened.
This leaves an async-put work pending, without any reference to release.
A subsequent async-put may trigger the

drm_WARN_ON(!queue_delayed_work(&power_domains->async_put_work));

warn due to async_put_work() still pending. To avoid the warn, cancel
the pending async_put_work() when releasing the reference at (*) above.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3421
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2289Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526143729.2563672-2-imre.deak@intel.com

We check for dmc_payload being there at various points in the driver.
Replace it with the helper.

v2: rebased.
v3: Move intel_dmc to intel_dmc.h in another patch (Lucas)
v4: Remove headers not needed from intel_dmc.h

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526220256.4097-3-anusha.srivatsa@intel.com