This is in preparation for Ivy Bridge support
Signed-off-by: NAristeu Rozanski <arozansk@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This is in preparation for Ivy Bridge support
Signed-off-by: NAristeu Rozanski <arozansk@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This is preparation of Ivy Bridge support.
Signed-off-by: NAristeu Rozanski <arozansk@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

Ivy Bridge has more than one, so rename pci_br to pci_br0
Signed-off-by: NAristeu Rozanski <arozansk@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This is in preparation for the Ivy Bridge support.
Signed-off-by: NAristeu Rozanski <arozansk@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

This is in preparation of Ivy Bridge support.
Signed-off-by: NAristeu Rozanski <arozansk@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>

The Sandy Bridge EDAC driver uses a register in the IMC_DDRIO CSR
space to determine the type of DIMMs (registered or unregistered).
But this device does not exist on some single socket Sandy Bridge
servers.  While the type of DIMMs is nice to know, it is not essential
for this driver's other functions. So it seems harsh to have it
refuse to load at all when it cannot find this device.

Make the check for this device be optional. If it isn't present
just report the memory type as "MEM_UNKNOWN".
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, and __devexit
from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Daney <david.daney@cavium.com>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[   17.024963] EDAC DEBUG: get_memory_layout: TOHM: 132.160 GB (0x0000002043ffffff)<7>[   17.024971] EDAC DEBUG: get_memory_layout: SAD#0 DRAM up to 33.792 GB (0x0000000840000000) Interleave: 8:6 reg=0x000083c3
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Sandy bridge EDAC is calculating the memory size with overflow.
Basically, the size field and the integer calculation is using 32 bits.
More bits are needed, when the DIMM memories have high density.

The net result is that memories are improperly reported there, when
high-density DIMMs are used:

EDAC DEBUG: in drivers/edac/sb_edac.c, line at 591: mc#0: channel 0, dimm 0, -16384 Mb (-4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 591: mc#0: channel 1, dimm 0, -16384 Mb (-4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800

As the number of pages value is handled at the EDAC core as unsigned
ints, the driver shows the 16 GB memories at sysfs interface as 16760832
MB! The fix is simple: calculate the number of pages as unsigned 64-bits
integer.

After the patch, the memory size (16 GB) is properly detected:

EDAC DEBUG: in drivers/edac/sb_edac.c, line at 592: mc#0: channel 0, dimm 0, 16384 Mb (4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 592: mc#0: channel 1, dimm 0, 16384 Mb (4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800

Cc: stable@kernel.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Instead of reporting the error count via driver-specific details,
use the new way provided by edac_mc_handle_error.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

In order to avoid loosing error events, it is desirable to group
error events together and generate a single trace for several identical
errors.

The trace API already allows reporting multiple errors. Change the
handle_error function to also allow that.

The changes at the drivers were made by this small script:

	$file .=$_ while (<>);
	$file =~ s/(edac_mc_handle_error)\s*\(([^\,]+)\,([^\,]+)\,/$1($2,$3, 1,/g;
	print $file;
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove the arch-dependent parameter, as it were not used,
as the MCE tracepoint weren't implemented. It probably doesn't
make sense to have an MCE-specific tracepoint, as this will
cost more bytes at the tracepoint, and tracepoint is not free.

The changes at the EDAC drivers were done by this small perl script:

	$file .=$_ while (<>);
	$file =~ s/(edac_mc_handle_error)\s*\(([^\;]+)\,([^\,\)]+)\s*\)/$1($2)/g;
	print $file;
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Use a more common debugging style.

Remove __FILE__ uses, add missing newlines,
coalesce formats and align arguments.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The debug macro already adds that. Most of the work here was
made by this small script:

$f .=$_ while (<>);

$f =~ s/(debugf[0-9]\s*\(\s*)__FILE__\s*": /\1"/g;
$f =~ s/(debugf[0-9]\s*\(\s*)__FILE__\s*/\1/g;
$f =~ s/(debugf[0-9]\s*\(\s*)__FILE__\s*"MC: /\1"/g;

$f =~ s/(debugf[0-9]\s*\(\")\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+)__func__\s*\,\s*/\1\2/g;
$f =~ s/(debugf[0-9]\s*\(\")\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+),\s*__func__\s*\)/\1\2)/g;
$f =~ s/(debugf[0-9]\s*\(\"MC\:\s*)\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+)__func__\s*\,\s*/\1\2/g;
$f =~ s/(debugf[0-9]\s*\(\"MC\:\s*)\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+),\s*__func__\s*\)/\1\2)/g;

$f =~ s/\"MC\: \\n\"/"MC:\\n"/g;

print $f;

After running the script, manual cleanups were done to fix it the remaining
places.

While here, removed the __LINE__ on most places, as it doesn't actually give
useful info on most places.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

As EDAC doesn't use struct device itself, it created a parent dev
pointer called as "pdev".  Now that we'll be converting it to use
struct device, instead of struct devsys, this needs to be fixed.

No functional changes.
Reviewed-by: NAristeu Rozanski <arozansk@redhat.com>
Acked-by: NChris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

On SandyBridge, DDRIOA(Dev: 17 Func: 0 Offset: 328) is used
to detect whether DIMM is RDIMM/LRDIMM, not TA(Dev: 15 Func: 0).
Signed-off-by: NChen Gong <gong.chen@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Some edac drivers register themselves as mce decoders via
notifier_chain. But in current notifier_chain implementation logic,
it doesn't accept same notifier registered twice. If so, it will be
wrong when adding/removing the element from the list. For example,
on one SandyBridge platform, remove module sb_edac and then trigger
one error, it will hit oops because it has no mce decoder registered
but related notifier_chain still points to an invalid callback
function. Here is an example:

Call Trace:
 [<ffffffff8150ef6a>] atomic_notifier_call_chain+0x1a/0x20
 [<ffffffff8102b936>] mce_log+0x46/0x180
 [<ffffffff8102eaea>] apei_mce_report_mem_error+0x4a/0x60
 [<ffffffff812e19d2>] ghes_do_proc+0x192/0x210
 [<ffffffff812e2066>] ghes_proc+0x46/0x70
 [<ffffffff812e20d8>] ghes_notify_sci+0x48/0x80
 [<ffffffff8150ef05>] notifier_call_chain+0x55/0x80
 [<ffffffff81076f1a>] __blocking_notifier_call_chain+0x5a/0x80
 [<ffffffff812aea11>] ? acpi_os_wait_events_complete+0x23/0x23
 [<ffffffff81076f56>] blocking_notifier_call_chain+0x16/0x20
 [<ffffffff812ddc4d>] acpi_hed_notify+0x19/0x1b
 [<ffffffff812b16bd>] acpi_device_notify+0x19/0x1b
 [<ffffffff812beb38>] acpi_ev_notify_dispatch+0x67/0x7f
 [<ffffffff812aea3a>] acpi_os_execute_deferred+0x29/0x36
 [<ffffffff81069dc2>] process_one_work+0x132/0x450
 [<ffffffff8106bbcb>] worker_thread+0x17b/0x3c0
 [<ffffffff8106ba50>] ? manage_workers+0x120/0x120
 [<ffffffff81070aee>] kthread+0x9e/0xb0
 [<ffffffff81514724>] kernel_thread_helper+0x4/0x10
 [<ffffffff81070a50>] ? kthread_freezable_should_stop+0x70/0x70
 [<ffffffff81514720>] ? gs_change+0x13/0x13
Code: f3 49 89 d4 45 85 ed 4d 89 c6 48 8b 0f 74 48 48 85 c9 75 17 eb 41
0f 1f 80 00 00 00 00 41 83 ed 01 4c 89 f9 74 22 4d 85 ff 74 1d <4c> 8b
79 08 4c 89 e2 48 89 de 48 89 cf ff 11 4d 85 f6 74 04 41
RIP  [<ffffffff8150eef6>] notifier_call_chain+0x46/0x80
 RSP <ffff88042868fb20>
CR2: ffffffffa01af838
---[ end trace 0100930068e73e6f ]---
BUG: unable to handle kernel paging request at fffffffffffffff8
IP: [<ffffffff810705b0>] kthread_data+0x10/0x20
PGD 1a0d067 PUD 1a0e067 PMD 0
Oops: 0000 [#2] SMP

Only i7core_edac and sb_edac have such issues because they have more
than one memory controller which means they have to register mce
decoder many times.

Cc: <stable@vger.kernel.org> # 3.2 and upper
Signed-off-by: NChen Gong <gong.chen@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove some information that it is duplicated at the MCE log,
and don't have much usage for the error. Those data will be
added again, when creating a trace function that outputs both
memory errors and MCE fields.

Cc: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Now that all drivers got converted to use the new ABI, we can
drop the old one.
Acked-by: NChris Metcalf <cmetcalf@tilera.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The number of pages is a dimm property. Move it to the dimm struct.

After this change, it is possible to add sysfs nodes for the DIMM's that
will properly represent the DIMM stick properties, including its size.

A TODO fix here is to properly represent dual-rank/quad-rank DIMMs when
the memory controller represents the memory via chip select rows.
Reviewed-by: NAristeu Rozanski <arozansk@redhat.com>
Acked-by: NBorislav Petkov <borislav.petkov@amd.com>
Acked-by: NChris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Almost all edac	drivers	initialize csrow_info->first_page,
csrow_info->last_page and csrow_info->page_mask. Those vars are
used inside the EDAC core, in order to calculate the csrow affected
by an error, by using the routine edac_mc_find_csrow_by_page().

However, very few drivers actually use it:
        e752x_edac.c
        e7xxx_edac.c
        i3000_edac.c
        i82443bxgx_edac.c
        i82860_edac.c
        i82875p_edac.c
        i82975x_edac.c
        r82600_edac.c

There also a few other drivers that have their own calculus
formula internally using those vars.

All the others are just wasting time by initializing those
data.

While initializing data without using them won't cause any troubles, as
those information is stored at the wrong place (at csrows structure), it
is better to remove what is unused, in order to simplify the next patch.
Reviewed-by: NAristeu Rozanski <arozansk@redhat.com>
Acked-by: NBorislav Petkov <borislav.petkov@amd.com>
Acked-by: NChris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

On systems based on chip select rows, all channels need to use memories
with the same properties, otherwise the memories on channels A and B
won't be recognized.

However, such assumption is not true for all types of memory
controllers.

Controllers for FB-DIMM's don't have such requirements.

Also, modern Intel controllers seem to be capable of handling such
differences.

So, we need to get rid of storing the DIMM information into a per-csrow
data, storing it, instead at the right place.

The first step is to move grain, mtype, dtype and edac_mode to the
per-dimm struct.
Reviewed-by: NAristeu Rozanski <arozansk@redhat.com>
Reviewed-by: NBorislav Petkov <borislav.petkov@amd.com>
Acked-by: NChris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: James Bottomley <James.Bottomley@parallels.com>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: Mike Williams <mike@mikebwilliams.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The way a DIMM is currently represented implies that they're
linked into a per-csrow struct. However, some drivers don't see
csrows, as they're ridden behind some chip like the AMB's
on FBDIMM's, for example.

This forced drivers to fake^Wvirtualize a csrow struct, and to create
a mess under csrow/channel original's concept.

Move the DIMM labels into a per-DIMM struct, and add there
the real location of the socket, in terms of csrow/channel.
Latter patches will modify the location to properly represent the
memory architecture.

All other drivers will use a per-csrow type of location.
Some of those drivers will require a latter conversion, as
they also fake the csrows internally.

TODO: While this patch doesn't change the existing behavior, on
csrows-based memory controllers, a csrow/channel pair points to a memory
rank. There's a known bug at the EDAC core that allows having different
labels for the same DIMM, if it has more than one rank. A latter patch
is need to merge the several ranks for a DIMM into the same dimm_info
struct, in order to avoid having different labels for the same DIMM.

The edac_mc_alloc() will now contain a per-dimm initialization loop that
will be changed by latter patches in order to match other types of
memory architectures.
Reviewed-by: NAristeu Rozanski <arozansk@redhat.com>
Reviewed-by: NBorislav Petkov <borislav.petkov@amd.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NDavid Mackey <tdmackey@twitter.com>
Signed-off-by: NVinson Lee <vlee@twitter.com>
Acked-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

>From the driver design, the variable limit wants to compare with its
previous value, we should set the value of limit instead of the value
of tmp_mb to the variable prev.
Signed-off-by: NHui Wang <jason77.wang@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

We can identify dram interleave mode from the Dram Rule register
rather than Dram Interleave list register.

In this context, the reg of INTERLEAVE_MODE(reg) contains the Dram
Interleave list register, we can't get interleave mode from the reg,
while the variable interleave_mode saves the the mode got from the
Dram Rule register, so we use the variable to replace
INTERLEAVE_MDDE(reg) here.
Signed-off-by: NHui Wang <jason77.wang@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

As reported by Josh Boyer <jwboyer@redhat.com>:
>	drivers/edac/sb_edac.c: In function 'get_memory_error_data':
> 	drivers/edac/sb_edac.c:861:2: warning: left shift count >= width of type
> 	[enabled by default]
> 	<snip>
> 	ERROR: "__udivdi3" [drivers/edac/sb_edac.ko] undefined!
> 	make[1]: *** [__modpost] Error 1
> 	make: *** [modules] Error 2

PS.: compile-tested only
Reported-by: NJosh Boyer <jwboyer@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

These const tables are currently marked __devinitdata, but
Documentation/PCI/pci.txt says:

"o The ID table array should be marked __devinitconst; this is done
automatically if the table is declared with DEFINE_PCI_DEVICE_TABLE()."

So use DEFINE_PCI_DEVICE_TABLE(x).

Based on PaX and earlier work by Andi Kleen.
Signed-off-by: NLionel Debroux <lionel_debroux@yahoo.fr>
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

Several fields in struct cpuinfo_x86 were not defined for the
!SMP case, likely to save space.  However, those fields still
have some meaning for UP, and keeping them allows some #ifdef
removal from other files.  The additional size of the UP kernel
from this change is not significant enough to worry about
keeping up the distinction:

	   text    data     bss     dec     hex filename
	4737168	 506459	 972040	6215667	 5ed7f3	vmlinux.o.before
	4737444	 506459	 972040	6215943	 5ed907	vmlinux.o.after

for a difference of 276 bytes for an example UP config.

If someone wants those 276 bytes back badly then it should
be implemented in a cleaner way.
Signed-off-by: NKevin Winchester <kjwinchester@gmail.com>
Cc: Steffen Persvold <sp@numascale.com>
Link: http://lkml.kernel.org/r/1324428742-12498-1-git-send-email-kjwinchester@gmail.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

No functionality change, this is done so that in a follow-on patch all
queued-up MCEs can be decoded after registering on the chain.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

The edac driver for Sandy Bridge was found to be reporting "FPM"
for edac_mode, which clearly doesn't make sense. It was found that
sb_edac.c:get_dimm_config was reusing a variable for both mem_type
and edac_type, and thus was overwriting the value after setting
it correctly. This patch fixes that issue.

Before the patch:
/sys/devices/system/edac/mc/mc0/csrow0/edac_mode:FPM
/sys/devices/system/edac/mc/mc0/csrow1/edac_mode:FPM
/sys/devices/system/edac/mc/mc0/csrow2/edac_mode:FPM
/sys/devices/system/edac/mc/mc0/csrow3/edac_mode:FPM

After:
/sys/devices/system/edac/mc/mc0/csrow0/edac_mode:S4ECD4ED
/sys/devices/system/edac/mc/mc0/csrow1/edac_mode:S4ECD4ED
/sys/devices/system/edac/mc/mc0/csrow2/edac_mode:S4ECD4ED
/sys/devices/system/edac/mc/mc0/csrow3/edac_mode:S4ECD4ED
Signed-off-by: NMark A. Grondona <mgrondona@llnl.gov>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Some changes on it were required due to changeset cd90cc84c6bf0, that
changed the glue with the MCE logic.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This driver is known to work on mine and Tony's test environments,
using software error injection, and a partial hardware/software
error injection tool.

There's no broader range test yet to double check if the error decoding
logic will actually point to the right DIMM, so use it with care.
More tests are required to be sure that the driver will work on all
different types of memory configurations.

If you're willing to risk using it, I suggest you to enable EDAC debugs
for your test machines, as the debug logs helps to track what's going
inside the driver.

Please feed me with bug reports, if you notice that the driver
is miss-behaving.
Tested-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>