Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 23 5月, 2014 2 次提交
  3. 12 4月, 2014 1 次提交
    • D
      net: Fix use after free by removing length arg from sk_data_ready callbacks. · 676d2369
      由 David S. Miller 提交于 
      Several spots in the kernel perform a sequence like:

	skb_queue_tail(&sk->s_receive_queue, skb);
	sk->sk_data_ready(sk, skb->len);

But at the moment we place the SKB onto the socket receive queue it
can be consumed and freed up.  So this skb->len access is potentially
to freed up memory.

Furthermore, the skb->len can be modified by the consumer so it is
possible that the value isn't accurate.

And finally, no actual implementation of this callback actually uses
the length argument.  And since nobody actually cared about it's
value, lots of call sites pass arbitrary values in such as '0' and
even '1'.

So just remove the length argument from the callback, that way there
is no confusion whatsoever and all of these use-after-free cases get
fixed as a side effect.

Based upon a patch by Eric Dumazet and his suggestion to audit this
issue tree-wide.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      676d2369
  5. 01 4月, 2014 1 次提交
    • S
      nfsd: check passed socket's net matches NFSd superblock's one · 30646394
      由 Stanislav Kinsbursky 提交于 
      There could be a case, when NFSd file system is mounted in network, different
to socket's one, like below:

"ip netns exec" creates new network and mount namespace, which duplicates NFSd
mount point, created in init_net context. And thus NFS server stop in nested
network context leads to RPCBIND client destruction in init_net.
Then, on NFSd start in nested network context, rpc.nfsd process creates socket
in nested net and passes it into "write_ports", which leads to RPCBIND sockets
creation in init_net context because of the same reason (NFSd monut point was
created in init_net context). An attempt to register passed socket in nested
net leads to panic, because no RPCBIND client present in nexted network
namespace.

This patch add check that passed socket's net matches NFSd superblock's one.
And returns -EINVAL error to user psace otherwise.

v2: Put socket on exit.
Reported-by: NWeng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Cc: stable@vger.kernel.org
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
      30646394
  7. 10 10月, 2013 1 次提交
  9. 09 10月, 2013 1 次提交
    • E
      ipv6: make lookups simpler and faster · efe4208f
      由 Eric Dumazet 提交于 
      TCP listener refactoring, part 4 :

To speed up inet lookups, we moved IPv4 addresses from inet to struct
sock_common

Now is time to do the same for IPv6, because it permits us to have fast
lookups for all kind of sockets, including upcoming SYN_RECV.

Getting IPv6 addresses in TCP lookups currently requires two extra cache
lines, plus a dereference (and memory stall).

inet6_sk(sk) does the dereference of inet_sk(__sk)->pinet6

This patch is way bigger than its IPv4 counter part, because for IPv4,
we could add aliases (inet_daddr, inet_rcv_saddr), while on IPv6,
it's not doable easily.

inet6_sk(sk)->daddr becomes sk->sk_v6_daddr
inet6_sk(sk)->rcv_saddr becomes sk->sk_v6_rcv_saddr

And timewait socket also have tw->tw_v6_daddr & tw->tw_v6_rcv_saddr
at the same offset.

We get rid of INET6_TW_MATCH() as INET6_MATCH() is now the generic
macro.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      efe4208f
  11. 01 8月, 2013 1 次提交
    • N
      NFSD/sunrpc: avoid deadlock on TCP connection due to memory pressure. · 447383d2
      由 NeilBrown 提交于 
      Since we enabled auto-tuning for sunrpc TCP connections we do not
guarantee that there is enough write-space on each connection to
queue a reply.

If memory pressure causes the window to shrink too small, the request
throttling in sunrpc/svc will not accept any requests so no more requests
will be handled.  Even when pressure decreases the window will not
grow again until data is sent on the connection.
This means we get a deadlock:  no requests will be handled until there
is more space, and no space will be allocated until a request is
handled.

This can be simulated by modifying svc_tcp_has_wspace to inflate the
number of byte required and removing the 'svc_sock_setbufsize' calls
in svc_setup_socket.

I found that multiplying by 16 was enough to make the requirement
exceed the default allocation.  With this modification in place:
   mount -o vers=3,proto=tcp 127.0.0.1:/home /mnt
would block and eventually time out because the nfs server could not
accept any requests.

This patch relaxes the request throttling to always allow at least one
request through per connection.  It does this by checking both
  sk_stream_min_wspace() and xprt->xpt_reserved
are zero.
The first is zero when the TCP transmit queue is empty.
The second is zero when there are no RPC requests being processed.
When both of these are zero the socket is idle and so one more
request can safely be allowed through.

Applying this patch allows the above mount command to succeed cleanly.
Tracing shows that the allocated write buffer space quickly grows and
after a few requests are handled, the extra tests are no longer needed
to permit further requests to be processed.

The main purpose of request throttling is to handle the case when one
client is slow at collecting replies and the send queue gets full of
replies that the client hasn't acknowledged (at the TCP level) yet.
As we only change behaviour when the send queue is empty this main
purpose is still preserved.
Reported-by: NBen Myers <bpm@sgi.com>
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
      447383d2
  13. 25 7月, 2013 1 次提交
  15. 02 7月, 2013 2 次提交
    • J
      svcrpc: don't error out on small tcp fragment · 1f691b07
      由 J. Bruce Fields 提交于 
      Though clients we care about mostly don't do this, it is possible for
rpc requests to be sent in multiple fragments.  Here we have a sanity
check to ensure that the final received rpc isn't too small--except that
the number we're actually checking is the length of just the final
fragment, not of the whole rpc.  So a perfectly legal rpc that's
unluckily fragmented could cause the server to close the connection
here.

Cc: stable@vger.kernel.org
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
      1f691b07
    • J
      svcrpc: fix handling of too-short rpc's · cf3aa02c
      由 J. Bruce Fields 提交于 
      If we detect that an rpc is too short, we abort and close the
connection.  Except, there's a bug here: we're leaving sk_datalen
nonzero without leaving any pages in the sk_pages array.  The most
likely result of the inconsistency is a subsequent crash in
svc_tcp_clear_pages.

Also demote the BUG_ON in svc_tcp_clear_pages to a WARN.

Cc: stable@kernel.org
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
      cf3aa02c
  17. 01 2月, 2013 1 次提交
  19. 18 12月, 2012 2 次提交
  21. 04 12月, 2012 5 次提交
  23. 05 11月, 2012 1 次提交
  25. 10 9月, 2012 1 次提交
    • J
      nfsd: remove unused listener-removal interfaces · eccf50c1
      由 J. Bruce Fields 提交于 
      You can use nfsd/portlist to give nfsd additional sockets to listen on.
In theory you can also remove listening sockets this way.  But nobody's
ever done that as far as I can tell.

Also this was partially broken in 2.6.25, by
a217813f "knfsd: Support adding
transports by writing portlist file".

(Note that we decide whether to take the "delfd" case by checking for a
digit--but what's actually expected in that case is something made by
svc_one_sock_name(), which won't begin with a digit.)

So, let's just rip out this stuff.
Acked-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
      eccf50c1
  27. 22 8月, 2012 6 次提交
  29. 21 8月, 2012 1 次提交
    • J
      svcrpc: fix BUG() in svc_tcp_clear_pages · be1e4444
      由 J. Bruce Fields 提交于 
      Examination of svc_tcp_clear_pages shows that it assumes sk_tcplen is
consistent with sk_pages[] (in particular, sk_pages[n] can't be NULL if
sk_tcplen would lead us to expect n pages of data).

svc_tcp_restore_pages zeroes out sk_pages[] while leaving sk_tcplen.
This is OK, since both functions are serialized by XPT_BUSY.  However,
that means the inconsistency must be repaired before dropping XPT_BUSY.

Therefore we should be ensuring that svc_tcp_save_pages repairs the
problem before exiting svc_tcp_recv_record on error.

Symptoms were a BUG() in svc_tcp_clear_pages.

Cc: stable@vger.kernel.org
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
      be1e4444
  31. 28 6月, 2012 1 次提交
  33. 16 5月, 2012 1 次提交
  35. 22 4月, 2012 1 次提交
  37. 12 3月, 2012 1 次提交
    • T
      SUNRPC: Fix a few sparse warnings · 09acfea5
      由 Trond Myklebust 提交于 
      net/sunrpc/svcsock.c:412:22: warning: incorrect type in assignment
(different address spaces)
 - svc_partial_recvfrom now takes a struct kvec, so the variable
   save_iovbase needs to be an ordinary (void *)

Make a bunch of variables in net/sunrpc/xprtsock.c static

Fix a couple of "warning: symbol 'foo' was not declared. Should it be
static?" reports.

Fix a couple of conflicting function declarations.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
      09acfea5
  39. 04 2月, 2012 1 次提交
  41. 01 2月, 2012 2 次提交
  43. 07 12月, 2011 1 次提交
  45. 23 11月, 2011 1 次提交
  47. 01 11月, 2011 1 次提交
  49. 14 9月, 2011 1 次提交
  51. 16 7月, 2011 1 次提交
  53. 15 7月, 2011 1 次提交