add ieee80211_iter_keys_rcu() to iterate over uploaded
keys in atomic context (when rcu is locked)

The station removal code removes the keys only after
calling synchronize_net(), so it's not safe to iterate
the keys at this point (and postponing the actual key
deletion with call_rcu() might result in some
badly-ordered ops calls).

Add a flag to indicate a station is being removed,
and skip the configured keys if it's set.
Signed-off-by: NEliad Peller <eliadx.peller@intel.com>
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

This can happen when the driver needs to send less frames
than expected and then needs to close the SP.
Mac80211 still needs to set the more_data properly based
on its buffer state (ps_tx_buffer and buffered frames on
other TIDs).
To that end, refactor the code that delivers frames upon
uAPSD trigger frames to be able to get only the more_data
bit without actually delivering those frames in case the
driver is just asking to set a NDP with EOSP and MORE_DATA
bit properly set.
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Signed-off-by: NOla Olsson <ola.olsson@sonymobile.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

In this attribute's documentation, it was not clear whether the delay
started counting when WoWLAN net-detect was enabled or when the system
was suspended.  The correct answer is that it starts when the system
suspends (which is when, in practice, the scan is scheduled).  Clarify
that in the nl80211.h documentation.
Suggested-by: NSamuel Tan <samueltan@google.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

This really should never happen except very early in the process
of bringing up a new driver, at which point you'll have to add
more debugging in the driver and this string isn't useful. Remove
it and save some size (when it's even compiled in.)
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

This indicates a driver key selection issue, but even then there's
no point in printing it all the time, so ratelimit it. Also remove
the priv pointer from it -- people debugging will only have a single
device anyway and it's useless as anything but a cookie.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

There's no point in printing the mpath pointer since it can't
be used for anything - print the MAC address instead (like in
the forwarding case.)
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Acked-by: NBob Copeland <me@bobcopeland.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The function is a very simple wrapper around another one,
just adds a few default parameters, so replace it with a
static inline instead of using EXPORT_SYMBOL, reducing
the module size slightly.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Complete the tracepoint with the missing data - it's not printed
by default (a lot of it is dynamic arrays) but will be recorded
and be available during post-processing.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Add missing tracing for:

1. start_radar_detection()
2. set_mcast_rates()
3. set_coalesce()
Signed-off-by: NIlan Peer <ilan.peer@intel.com>
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Some devices or drivers cannot deal with having the same station
address for different virtual interfaces, say as a client to two
virtual AP interfaces. Rather than requiring each driver with a
limitation like that to enforce it, add a hardware flag for it.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

I want to get the full off-channel bugfix since later code depends on
it, as well as the AP client state change so I can revert it correctly.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

In the last change here, I neglected to update the cookie in one code
path: when a mgmt-tx has no real cookie sent to userspace as it doesn't
wait for a response, but is off-channel. The original code used the SKB
pointer as the cookie and always assigned the cookie to the TX SKB in
ieee80211_start_roc_work(), but my change turned this around and made
the code rely on a valid cookie being passed in.

Unfortunately, the off-channel no-wait TX path wasn't assigning one at
all, resulting in an uninitialized stack value being used. This wasn't
handed back to userspace as a cookie (since in the no-wait case there
isn't a cookie), but it was tested for non-zero to distinguish between
mgmt-tx and off-channel.

Fix this by assigning a dummy non-zero cookie unconditionally, and get
rid of a misleading comment and some dead code while at it. I'll clean
up the ACK SKB handling separately later.

Fixes: 3b79af97 ("mac80211: stop using pointers as userspace cookies")
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

DFS channels should not be actively scanned as we can't be sure
if we are allowed or not.

If the current channel is in the DFS band, active scan might be
performed after CSA, but we have no guarantee about other channels,
therefore it is safer to prevent active scanning at all.

Cc: stable@vger.kernel.org
Signed-off-by: NAntonio Quartulli <antonio@open-mesh.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Interfaces are being initialized (setup) on addition,
and torn down on removal.

However, p2p device is being torn down when stopped,
resulting in the next p2p start operation being done
on uninitialized interface.

Solve it by calling ieee80211_teardown_sdata() only
on interface removal (for the non-netdev case).
Signed-off-by: NEliad Peller <eliadx.peller@intel.com>
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
[squashed in fix to call teardown after unregister]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Geert Uytterhoeven says:

====================
sh_eth: Remove obsolete platform_device_id entries

Since commit 3d7608e4 ("ARM: shmobile: bockw: remove legacy
board file and config"), which is in v4.4-rc1, shmobile SoCs are only
supported in generic DT-only ARM multi-platform builds.  The sh_eth
driver doesn't need to match platform devices by name anymore, hence
this series removes the corresponding platform_device_id entries.

Changes since v2:
  - More Acks,
  - Platform dependency has entered mainline,

Changes since v1:
  - Protect some data and functions by #ifdef CONFIG_OF to silence
    unused compiler warnings on SH,
  - New patches 3 and 4.

Thanks for applying!
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since commit 3d7608e4 ("ARM: shmobile: bockw: remove legacy
board file and config"), R-Car Gen1 SoCs are only supported in generic
DT-only ARM multi-platform builds.  The driver doesn't need to match
platform devices by name anymore, hence remove the corresponding
platform_device_id entry.

Protect sh_eth_set_rate_r8a777x() and r8a777x_data by #ifdef CONFIG_OF,
as they're now referenced on DT platforms only.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since commit 1fa59bda ("ARM: shmobile: Remove legacy board code
for Armadillo-800 EVA"), r8a7740 is only supported in generic DT-only
ARM multi-platform builds.  The driver doesn't need to match platform
devices by name anymore, hence remove the corresponding
platform_device_id entry.

Protect r8a7740_data by #ifdef CONFIG_OF as it's now referenced on DT
platforms only. Move it to a more logical position, in front of the
r8a777x support, so we can have a single #ifdef covering all r7s* and
r8a* support soon. This requires moving a few helper functions, too.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since commit a483dcbf ("ARM: shmobile: lager: Remove legacy
board support"), R-Car Gen2 SoCs are only supported in generic DT-only
ARM multi-platform builds.  The driver doesn't need to match platform
devices by name anymore, hence remove the corresponding
platform_device_id entry.

Protect r8a779x_data by #ifdef CONFIG_OF as it's now referenced on DT
platforms only.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since commit 05104c26 ("ARM: shmobile: r7s72100: genmai: Remove
legacy board file"), r7s72100 is only supported in generic DT-only ARM
multi-platform builds.  The driver doesn't need to match platform
devices by name anymore, hence remove the corresponding
platform_device_id entry.

Protect r7s72100_data by #ifdef CONFIG_OF as it's now referenced on DT
platforms only. Move it to a more logical position, in front of the
r8a777x support, so we can have a single #ifdef covering all r7s* and
r8a* support soon. This requires moving a helper function, too.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The private slave queue and slave struct haven't been used for anything
and aren't needed, this allows to reduce memory usage and simplify
enslave/release. We can use netdev_for_each_lower_dev() to free the vrf
ports when deleting a vrf device. Also if in the future a private struct
is needed for each slave, it can be implemented via lower devices'
private member (similar to how bonding does it).
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2015-11-23

Here's the first bluetooth-next pull request for the 4.5 kernel.

 - Add new Get Advertising Size Information management command
 - Add support for new system note message type on monitor channel
 - Refactor LE scan changes behind separate workqueue to avoid races
 - Fix issue with privacy feature when powering on adapter
 - Various minor fixes & cleanups here and there

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

in case of error no need to set num_tx and num_rx = 1, because in case of error
these variables will remain unchanged by of_property_read_u32 ie 1 only
Signed-off-by: NSaurabh Sengar <saurabh.truth@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

this patch does the following:
1 .  remove unnecessary if, else condition
2 .  reduce one variable
3 .  change the return type of 2 functions to void as there return values
turn out to be 0 always after above changes
Signed-off-by: NSaurabh Sengar <saurabh.truth@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'linux-can-next-for-4.5-20151123' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2015-11-23

this is a pull request of a single patch for net-next/master.

The patch by Kedareswara rao Appana converts the xilinx CAN driver to
runtime_pm.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 09605cc1 ("net ipv4: use preferred log methods") replaced
a few calls of pr_cont() after a console print without a trailing
newline by pr_info(), causing lines to be split during IP
autoconfiguration, like:

    .
    ,
     OK
    IP-Config: Got DHCP answer from 192.168.97.254,
    my address is 192.168.97.44

Convert these back to using pr_cont(), so it prints again:

    ., OK
    IP-Config: Got DHCP answer from 192.168.97.254, my address is 192.168.97.44

Absorb the printing of "my address ..." into the previous call to
pr_info(), as there's no reason to use a continuation there.

Convert one more pr_info() to print nameservers while we're at it.

Fixes: 09605cc1 ("net ipv4: use preferred log methods")
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After the introduction of the switch gpio reset API, I'm getting
build errors in configurations that disable CONFIG_GPIOLIB:

net/dsa/dsa.c:783:16: error: implicit declaration of function 'gpio_to_desc' [-Werror=implicit-function-declaration]

The reason is that linux/gpio/consumer.h is not automatically
included without gpiolib support. This adds an explicit #include
statement to make it compile in all configurations. The reset
functionality will not work without gpiolib, which is what you
get when disabling the feature.

As far as I can tell, gpiolib is supported on all architectures
on which you can have DSA at the moment.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Fixes: cc30c163 ("net: dsa: Add support for a switch reset gpio")
Acked-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2015-11-23

This series contains updates to ixgbe, ixgbevf, fm10k, i40e and i40evf.

Jacob fixes an issue where VF could attempt to read queues it does not own,
so prevent this we check queue 0 before we continue.

Matthew fixes the MTU for jumbo frames for fm10k.

Julia Lawall cleans up a unneeded NULL test in ixgbe.

Mark cleans up a redundant header inclusion.  Adds KR mode support for
CS4227 chip.  Cleaned up diagnostic code, which is no longer needed, for
the CS4227 chip.

Jean Sacren fixes kernel documentation for ixgbe.

Alex Duyck fixes an fm10k and ixgbe issue in which the polling routine would
increase the budget for receive to at least 1 per queue if multiple queues were
present.  This would result in receive packets being processed when the budget
was 0 which is meant to indicate that no receive can be handled.  Also fixes
an ixgbevf performance issue where netperf test will starve for memory in the
time form one transmit interrupt to the next, so limit lowest interrupt rate
for adaptive interrupt moderation to 12K.  Fixed up ixgbe and ixgbevf to
use napi_schedule_irqoff() where the drivers were run from hard interrupt
context or with interrupts already disabled in netpoll.

Jesse fixes a compiler warning about an unused variable for i40evf.

John Greene fixes an issue with ixgbevf, where if the VF driver is loaded
while the corresponding PH interface is down, the driver assigns a random
MAC address, can be overwritten with the value of hw->mac.perm_addr which
is 0 at that point.  So avoid this case by initializing hw->mac.perm_addr
to the randomly generated address and do not set it unless we receive an
ACK from ixgbe.

Rasmus Villemoes cleans up some confusing code in i40e debugfs code.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The vmci_transport_notify_ops structures are never modified, so declare
them as const.

Done with the help of Coccinelle.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The in_cache_ops and eg_cache_ops structures are never modified, so declare
them as const.

Done with the help of Coccinelle.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Nikolay Aleksandrov says:

====================
net: ipmr: cleanups and minor improvements

Since I'll have to work with ipmr, I decided to clean it up and do some
minor improvements. Functionally there're almost no changes except the
SLAB_PANIC removal. Most of the patches just re-design some functions to
be clearer and more concise and try to remove the ifdef web that was
inside. There's more information in each commit. This is the first set,
the end goal is to introduce complete netlink support and control over
the mfc and vif devices.
I've tried to test all of the setsockopt/getsockopt options, and also
made builds with various ipmr kconfig options turned on and off.

v2: change patch 7 to keep SLAB_PANIC and just drop the unnecessary null
check
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Factor out common vif init code used in both tunnel and pimreg
initialization and create ipmr_init_vif_indev() function.
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Take rtnl in the beginning unconditionally as most options already need
it (one exception - MRT_DONE, see the comment inside), make the
lock/unlock places central and move out the switch() local variables.
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It's not necessary to check for null as SLAB_PANIC is used and we'll
panic if the alloc fails, so just drop it.
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Trivial replace of ifdef with IS_BUILTIN().
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use a switch to determine if optname is correct and set val accordingly.
This produces a much more straight-forward and readable code.
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Trivial code and comment style fixes, also removed some extra newlines,
spaces and tabs.
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the helper pimsm_enabled() which replaces the old CONFIG_IP_PIMSM
define and is used to check if any version of PIM-SM has been enabled.
Use a single if defined(CONFIG_IP_PIMSM_V1) || defined(CONFIG_IP_PIMSM_V2)
for the pim-sm shared code. This is okay w.r.t IGMPMSG_WHOLEPKT because
only a VIFF_REGISTER device can send such packet, and it can't be
created if pimsm_enabled() is false.
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Before mroute_reg_vif_num was defined only if any of the CONFIG_PIMSM_
options were set, but that's not really necessary as the size of the
struct is the same in both cases (checked with pahole, both cases size
is 3256 bytes) and we can remove some unnecessary ifdefs to simplify the
code.
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move the table id check in ipmr_new_table and make it return error
pointer. We need this change for the upcoming netlink table manipulation
support in order to avoid code duplication and a race condition.
Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>