add the get_dpm_ultimate_freq for supporting different swSMU.
-v2:
        Handle the unsupported clock type and read smc message failed case and return error code.
        Move the smu12 uclk frequency retrieved logic to renoir ppt.
-v3:
        Use goto clause to handle invalidate clk index.
        Add the limited tag for smu_get_dpm_uclk to avoid other likewise interface introduced.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Should populate DPM clocks tables during hw init,otherwise will
suffer from invalidate table.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There is no driver message to enable/disable feature mask for APU.
For the sake of APU reusing swSMU interface and assume APU supports all
the feature.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

To avoid the dpm frequence range get failed when DPM enabled and it
will be enabled later once handle well the feature bit map struct.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

enable the dpm feature for the renoir.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch adds add DPMCLOCKS table implementation
Rename smu_populate_smc_pptable to smu_populate_smc_tables
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch updates gfxoff feature.
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

All apu series need powerup sdma and vcn via smu messages.
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Thus VCN can be powered up for normal operations
Signed-off-by: NLeo Liu <leo.liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Renoir DPM is not functional so far, we skip it for the comment.
Will revert this patch once SMU 12 is functional.
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1.Implement PowerUpSDMA/PowerDownSDMA interfaces in the swSMU for renoir
2.adjust smu ip block ahead of gfx&sdma ip block
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add swSMU [smu_v12_0] for renoir

v2: whitespace fixes (Alex)
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

change the smu_read_sensor sequence to:

asic specific sensor read -> smu v11 specific sensor read -> smu v11 common sensor read
Signed-off-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is not supported on Arcturus.

Affected ASIC: Arcturus

V2: minor cosmetic fix
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NLe Ma <Le.Ma@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Same as other Navi asics.
Signed-off-by: NXiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

vcn dpm on is a prerequisite for vcn power gate control.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Hook up the SW SMU power profile switch in KFD routine.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKevin Wang <kevin1.wang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This can prevent CPU to use the out-dated copy.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There are a few spelling mistakes "unknow" -> "unknown" and
"enabeld" -> "enabled". Fix these.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There are two occurrances of off-by-one upper bound checking of indexes
causing potential out-of-bounds array reads. Fix these.

Addresses-Coverity: ("Out-of-bounds read")
Fixes: cb33363d ("drm/amd/powerplay: add smu feature name support")
Fixes: 6b294793 ("drm/amd/powerplay: add smu message name support")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

before this change, the pp_feature sysfs show feature enable state by
logic feature id, it is not easy to read.
this change will sort pp_features show index by asic feature id.

before:
features high: 0x00000623 low: 0xb3cdaffb
00. DPM_PREFETCHER       ( 0) : enabeld
01. DPM_GFXCLK           ( 1) : enabeld
02. DPM_UCLK             ( 3) : enabeld
03. DPM_SOCCLK           ( 4) : enabeld
04. DPM_MP0CLK           ( 5) : enabeld
05. DPM_LINK             ( 6) : enabeld
06. DPM_DCEFCLK          ( 7) : enabeld
07. DS_GFXCLK            (10) : enabeld
08. DS_SOCCLK            (11) : enabeld
09. DS_LCLK              (12) : disabled
10. PPT                  (23) : enabeld
11. TDC                  (24) : enabeld
12. THERMAL              (33) : enabeld
13. RM                   (35) : disabled
......

after:
features high: 0x00000623 low: 0xb3cdaffb
00. DPM_PREFETCHER       ( 0) : enabeld
01. DPM_GFXCLK           ( 1) : enabeld
02. DPM_GFX_PACE         ( 2) : disabled
03. DPM_UCLK             ( 3) : enabeld
04. DPM_SOCCLK           ( 4) : enabeld
05. DPM_MP0CLK           ( 5) : enabeld
06. DPM_LINK             ( 6) : enabeld
07. DPM_DCEFCLK          ( 7) : enabeld
08. MEM_VDDCI_SCALING    ( 8) : enabeld
09. MEM_MVDD_SCALING     ( 9) : enabeld
10. DS_GFXCLK            (10) : enabeld
11. DS_SOCCLK            (11) : enabeld
12. DS_LCLK              (12) : disabled
13. DS_DCEFCLK           (13) : enabeld
......
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Commonly used for VCN powergate status retrieval for SW SMU.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move SMU irq handler register to sw_init as that's totally
software related. Otherwise, it will prevent SMU reset working.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

DPM state relates are not supported on the new SW SMU ASICs. But still
it's not OK to trigger null pointer dereference on accessing them.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The power limit retrieval should be done per asic. Since we may
need to lookup in the pptable and that's really asic specific.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Commonly used for VCN powergate status retrieval for SW SMU.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable arcturus SW SMU routines.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is especially useful in early bring up phase.

v2: disabled by default (Alex)
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NLe Ma <Le.Ma@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1. Unified feature enable status format in sysfs
2. Rename ppfeature to pp_features to adapt other pp sysfs node name
3. this function support all asic, not asic related function.
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Acked-by: NRui Huang <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

this function is not ip or asic related function,
so move it to top level as public api in smu.
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add smu_get_feature_name support in smu.
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add smu_get_message_name support in smu.
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move SMU irq handler register to sw_init as that's totally
software related. Otherwise, it will prevent SMU reset working.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

DPM state relates are not supported on the new SW SMU ASICs. But still
it's not OK to trigger null pointer dereference on accessing them.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Drop redundant check, duplicate check, duplicate setting
and fix the return value.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Honor the 'dpm' module parameter setting on SW SMU routine as what
we did on previous ASICs. SMU FW loading is still proceeded even
with "dpm=0".
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2:
add function smu_default_set_performance_level as default dpm level handler.
change function name smu_set_performance_level to smu_asic_set_performance_level

v1:
1.NAVI10_PEAK_SCLK_XTX    1830 Mhz
2.NAVI10_PEAK_SCLK_XT     1755 Mhz
3.NAVI10_PEAK_SCLK_XL     1625 Mhz
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NJack Gui <Jack.Gui@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

remove redundacy debug log in smu.
eg:
[ 6897.969447] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6897.969448] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6897.969448] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6899.024114] amdgpu: [powerplay] Unsupported SMU message: 38
[ 6899.024151] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6899.024151] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6899.024152] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6900.078296] amdgpu: [powerplay] Unsupported SMU message: 38
[ 6900.078332] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6900.078332] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6900.078333] amdgpu: [powerplay] smu 11 clk dpm feature 1 is not enabled
[ 6901.133230] amdgpu: [powerplay] Unsupported SMU message: 38
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2:
add function smu_default_set_performance_level as default dpm level handler.
change function name smu_set_performance_level to smu_asic_set_performance_level

v1:
1.NAVI10_PEAK_SCLK_XTX    1830 Mhz
2.NAVI10_PEAK_SCLK_XT     1755 Mhz
3.NAVI10_PEAK_SCLK_XL     1625 Mhz
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NKenneth Feng <kenneth.feng@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NJack Gui <Jack.Gui@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

With gfxclk or uclk dpm disabled, it's reasonable to report bootup clock
as the max supported.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>