v2: Hide the 945 vs. rest of gen2/3 difference in the macro
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Bspec update tells that we have to enable oscaledcompmethod instead of
ouniqetrangenmethod for enabling scale value during swing programming.

v2: Adding back 'don't care' values to bxt_ddi_translations_dp and add
error message if ouniquetrangemethod was set (Imre)
Signed-off-by: NSonika Jindal <sonika.jindal@intel.com>
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>(v1)
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Adding voltage swing table for edp to support low vswings.

v2: Rebased.
Signed-off-by: NSonika Jindal <sonika.jindal@intel.com>
Reviewed-by: NSivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

According to the PCI docs and Rafael, we don't need to be doing explicit
enables and disables in our init and teardown routines, as they're taken
care of by the PCI core.  So drop the pm_runtime_disable() at teardown
and pm_runtime_set_active() at init.

This fixes one failure of the basic-pci-d3-state test on my BYT.

v2: drop extra get_noresume() and put_noidle() (Rafael)

Signed-off-by: Jesse Barnes <jbarnes at virtuousgeek.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Acked-by: N"Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Bit 16 of GuC status indicates resuming from RC6. The LAPIC_DONE
status is a reliable readiness flag only when resuming from RC6.
This fix a racing issue that allocation of doorbell fails whilst
GuC init is not finished.
Signed-off-by: NAlex Dai <yu.dai@intel.com>
Reviewed-by: NSagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Always name any variable pointing at the adjusted mode as
'adjustead_mode'. This will make it much easier to identify
when we should use the crtc_ timings and when we shoudln't.

Conversion was performed with coccinelle:
@@
expression E;
identifier I;
@@
- struct drm_display_mode *I = &E.adjusted_mode;
+ struct drm_display_mode *adjusted_mode = &E.adjusted_mode;
<...
- I
+ adjusted_mode
...>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMika Kahola <mika.kahola@intel.com>
[danvet: Fixup conflicts.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Replace intel_dvo->panel_fixed_mode with the appropriate intel_panel
stuff. Now all connectors that have a fixed mode use intel_panel.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMika Kahola <mika.kahola@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Another interesting criteria to work dmc as expected is pw1 to be
enabled by driver and dmc will shut it off in its execution
sequence. If already disabled by driver dmc will get confuse and
behave differently than expected found during pc10 entry issue
for skl.

So berfore we disable power-well 1, added check if dmc firmware is
present and driver will not disable power well 1, but for any reason
if firmware is not present of failed to load we can shut off the
power well 1 which will save some power.

As skl is currently fully dependent on dmc to go in lowest possible
power state (dc6) but the same is not applicable for bxt. Display
engine can enter into dc9 without dmc, hence unblocking disable call.

v1: Initial version.

v2: Rebased as per current patch series.

Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Sunil Kamath <sunil.kamath@intel.com>
Signed-off-by: NAnimesh Manna <animesh.manna@intel.com>
Signed-off-by: NVathsala Nagaraju <vathsala.nagaraju@intel.com>
Reviewed-by: NA.Sunil Kamath <sunil.kamath@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

While display engine entering into low power state no need to disable
cdclk pll as CSR firmware of dmc will take care. If pll is already
enabled firmware execution sequence will be blocked. This is one
of the criteria for dmc to work properly.

v1: Initial version.

v2: Based on review comment from Daniel added code commnent.

Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Sunil Kamath <sunil.kamath@intel.com>
Signed-off-by: NAnimesh Manna <animesh.manna@intel.com>
Signed-off-bt: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: NRajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Reviewed-by: NA.Sunil Kamath <sunil.kamath@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch remove the function call to set the firmware
loading status as uninitialized during suspend.

Dmc firmware will restore the firmware in normal suspend. In previous
patch added a check to directly read the hardware status and load
the firmware if got reset during resume from suspend-hibernation.

Cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: NAnimesh Manna <animesh.manna@intel.com>
Signed-off-by: NVathsala Nagaraju <vathsala.nagaraju@intel.com>
Reviewed-by: NA.Sunil Kamath <sunil.kamath@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Dmc will restore the csr program except DC9, cold boot,
warm reset, PCI function level reset, and hibernate/suspend.

intel_csr_load_program() function is used to load the firmware
data from kernel memory to csr address space.

All values of csr address space will be zero if it got reset and
the first byte of csr program is always a non-zero if firmware
is loaded successfuly. Based on hardware status will load the
firmware.

Without this condition check if we overwrite the firmware data the
counters exposed for dc5/dc6 (help for debugging) will be nullified.

Note: Above commit message seems to be confused and the real problem
apparently going on is that for suspend-to-idle and system standby the
firmware survives (it's like runtime pm), but it doesn't for
suspend-to-mem and hibernate-to-disk. All the other talking about DC9
and pci reset are irrelevant for the path touched here (only driver
load and system resume functions) and might not be true statements.

v1: Initial version.

v2: Based on review comments from Daniel,
- Added a check to know hardware status and load the firmware if not loaded.

Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Sunil Kamath <sunil.kamath@intel.com>
Signed-off-by: NAnimesh Manna <animesh.manna@intel.com>
Signed-off-by: NVathsala Nagaraju <vathsala.nagaraju@intel.com>
Reviewed-by: NA.Sunil Kamath <sunil.kamath@intel.com>
[danvet: Explain clearly in the code comment when we need to reload
and when not and make it a FIXME. Also deconfuse the commit message
with a note. Also: Make. it. compile.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Virtualized systems often use a virtual P2X4 south bridge.
Detect this in intel_detect_pch and make a best guess as to which PCH
we should be using.

This was seen on vmware esxi hypervisor. When passing the graphics device
through to a guest, it can not pass through the PCH. Instead it simulates
a P2X4 southbridge.
Signed-off-by: NRobert Beckett <robert.beckett@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Leak a task reference in i915_ppgtt_info(), add put_task_struct()
to fix it.

Introduced by

commit 1c60fef5
Author: Ben Widawsky <ben@bwidawsk.net>
Date:   Fri Dec 6 14:11:30 2013 -0800

    drm/i915: Dump all ppgtt
Signed-off-by: NGeliang Tang <geliangtang@163.com>
[danvet: Add note provided by Jani about which commit introduced this
issue.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This function is the KMS native variant of drm_vblank_count_and_time().
It takes a struct drm_crtc * instead of a struct drm_device * and an
index of the CRTC.

Eventually the goal is to access vblank data through the CRTC only so
that the per-CRTC data can be moved to struct drm_crtc.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Since the original crtc parameter was renamed to pipe, there is no
longer a need to artificially prefix the CRTC parameter.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Fixes the following sparse warning:
 drivers/gpu/drm/drm_atomic.c:442:5: warning: symbol
 'drm_atomic_crtc_get_property' was not declared. Should it be static?
Signed-off-by: NGeliang Tang <geliangtang@163.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The DRM/DP helpers already contain a definition for this macro. Remove
the duplicate in the GMA500 driver to avoid having to keep both updated
synchronously.

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Reviewed-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Keep the fb_id, which means that any application exiting without
unsetting the framebuffer from all planes will preserve its contents.

This is similar to preserving the initial framebuffer, except all
planes are preserved.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
[danvet: Remove unused variable, reported by Stephen Rothwell.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Previously RMFB and fd close chose to disable any plane that had
an active framebuffer from this file. If it was a primary plane the
crtc was disabled. However the fbdev code or any system compositor
should restore the planes anyway so there's no need to do it twice.

The old fb_id is zero'd, so there's no danger of being able to
restore the fb from fb_id.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When lacking am accurate hardware frame counter, we can fall back to
using the vblank timestamps to guesstimagte how many vblanks have
elapsed since the last time the vblank counter was updated.

Take the oppostunity to unify the vblank_disable_and_save() and
drm_handle_vblank_events() to call the same function
(drm_update_vblank_count()) to perform the vblank updates.

If the hardware/driver has an accurate frame counter use it instead of
the timestamp based guesstimate. If the hardware/driver has neither
a frame counter nor acurate vblank timestamps, we fall back to assuming
that each drm_handle_vblank_events() should increment the vblank count
by one.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Remove the NULL 't_vblank' checks from store_vblank() since that will
never happen.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Avoid confusion and don't use 'vbl_status' as both the
.get_scanout_position() return value and the return value from
drm_calc_vbltimestamp_from_scanoutpos().

While at it make 'vbl_status' unsigned and print it as hex in the
debug prints since it's a bitmask.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Pontential infinite loops in the vblank code are a bad idea. Add some
limits.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We'll soon have use for the 'flags' in drm_update_vblank_count() so pass
it in.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The vblank counts are u32 so make flip_queued_vblank and
flip_ready_vblank u32 as well.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

pixeldur_ns is now unsued, so kill it from drm_vblank_crtc. framedur_ns
is also currently unused but we will have use for it in the near future
so leave it be. linedur_ns is still used by nouveau for some internal
delays.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

linedur_ns, and especially pixeldur_ns are becoming rather inaccurate
to be used for the vblank timestamp correction. With 4k@60 the pixel
duration is already below 2ns, so the amount of error due to the
truncation to nanoseconds is introducing quite a bit of error.

We can avoid such problems if we instead calculate the timestamp
delta_ns directly from the dislay timings, avoiding the use of
these intermediate truncated values.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
[danvet: Squash in fixup from Thierry Reding for amdgpu.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Collect the timestamping constants alongside the rest of the relevant
stuff under drm_vblank_crtc.

We can now get rid of the 'refcrtc' parameter to
drm_calc_vbltimestamp_from_scanoutpos().
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Starting with commit

        commit 28cc504e
        Author: Rob Clark <robdclark@gmail.com>
        Date:   Tue Aug 25 15:36:00 2015 -0400

            drm/i915: enable atomic fb-helper

I've been seeing some panics on i915 when the DRM master shuts down that appear
to be caused by using an already-freed framebuffer (i.e., we're unexpectedly
dropping our initial FB's reference count to 0 and freeing it, which causes a
crash when we try to restore it later).  Digging deeper, the state FB
refcounting is working as expected, but we seem to be missing proper
refcounting on the legacy plane->fb pointers in the new atomic fbdev code.

Tracking plane->old_fb and then doing a ref/unref at the end of the
fbdev restore like we do in the legacy ioctl's ensures we don't miscount
references on plane->fb and avoids the panics.

v2 from Daniel:

Really do what the atomic ioctl does:
- Also update plane->fb and plane->crtc.
- Clear out plane->old_fb on failures too.

v3: git add everything. Oops.

v4: Also clear old_fb in all other failure paths, spotted by David.

Cc: Rob Clark <robdclark@gmail.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com> (v1)
Reviewd-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Currently everyone and their dog has their own favourite spelling
for vga_switcheroo. This makes it hard to grep dmesg for log entries
relating to vga_switcheroo. It also makes it hard to find related
source files in the tree.

vga_switcheroo.c uses pr_fmt "vga_switcheroo". Use that everywhere.
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Finish the recent replacement of 'int pipe' with 'unsigned int pipe'

Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When preallocating a stolen object during early initialisation, we may
be running before we have setup the the global GTT VM state, in
particular before we have initialised the range manager and associated
lists. As this is the case, we defer binding the stolen object until we
call i915_gem_setup_global_gtt(). Not only should we defer the binding,
but we should also defer the VM list manipulation.

Fixes regression uncovered by commit a2cad9df
Author: Michał Winiarski <michal.winiarski@intel.com>
Date:   Wed Sep 16 11:49:00 2015 +0200

    drm/i915/gtt: Do not initialize drm_mm twice.

Whilst I am here remove the duplicate work leaving dangling pointers
from the error path...

v2: Typos galore before coffee.
Reported-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92099Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: NMichał Winiarski <michal.winiarski@intel.com>
Tested-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This should be harmless.
Vmware will, due to old infrastructure reasons, be using a privileged
control client to supply GUI layout information rather than obtaining
it from the device. That control client will be needing access to DRM
version information.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NBrian Paul <brianp@vmware.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>
Acked-by: NDavid Herrmann <dh.herrmann@gmail.com>

Function vmw_kms_helper_dirty() uses the uninitialized variable ret as
return value. Make the result deterministic and directly return as the
variable is unused anyway. Detected by Coverity CID 1324255.
Signed-off-by: NChristian Engelmayer <cengelma@gmx.at>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>

Function vmw_cotable_unbind() uses the uninitialized variable ret as
return value. Make the result deterministic and directly return as
the variable is unused anyway. Detected by Coverity CID 1324256.
Signed-off-by: NChristian Engelmayer <cengelma@gmx.at>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>

The function can return negative value.

The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1].

[1]: http://permalink.gmane.org/gmane.linux.kernel/2038576Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

mgag200_driver_load's error path just calls the drm driver's
driver_unload op. It isn't safe to call this because it doesn't handle
things well if driver_load fails somewhere mid way.

Replace the call to mgag200_driver_unload with a more finegrained
error handling path.

Link: http://lkml.kernel.org/r/55F6E68D.8070800@codeaurora.orgReported-by: NIngo Molnar <mingo@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Set up error handling in mgag200_fbdev_init and mgag200fb_create such that
they release the things they allocate, rather than relying on someone
calling mga_fbdev_destroy.

Based on a patch by Sudip Mukherjee <sudipm.mukherjee@gmail.com>

Link: http://lkml.kernel.org/r/55F6E68D.8070800@codeaurora.orgReported-by: NIngo Molnar <mingo@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

If the server isn't new enough to give us state, report the first
monitor as always connected, otherwise believe the server side.

Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>