Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 04 7月, 2008 1 次提交
  3. 01 7月, 2008 1 次提交
  5. 28 6月, 2008 6 次提交
    • A
      PCI: remove unused arch pcibios_update_resource() functions · 0aea5313
      由 Adrian Bunk 提交于 
      Russell King did the following back in 2003:

<--  snip  -->

    [PCI] pci-9: Kill per-architecture pcibios_update_resource()

    Kill pcibios_update_resource(), replacing it with pci_update_resource().
    pci_update_resource() uses pcibios_resource_to_bus() to convert a
    resource to a device BAR - the transformation should be exactly the
    same as the transformation used for the PCI bridges.

    pci_update_resource "knows" about 64-bit BARs, but doesn't attempt to
    set the high 32-bits to anything non-zero - currently no architecture
    attempts to do something different.  If anyone cares, please fix; I'm
    going to reflect current behaviour for the time being.

    Ivan pointed out the following architectures need to examine their
    pcibios_update_resource() implementation - they should make sure that
    this new implementation does the right thing.  #warning's have been
    added where appropriate.

        ia64
        mips
        mips64

    This cset also includes a fix for the problem reported by AKPM where
    64-bit arch compilers complain about the resource mask being placed
    in a u32.

<--  snip  -->

This patch removes the unused pcibios_update_resource() functions the
kernel gained since, from FRV, m68k, mips & sh architectures.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Acked-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NGreg Ungerer <gerg@uclinux.org>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
      0aea5313
    • D
      PCI: fix pci_setup_device()'s sprinting into a const buffer · 8b285ce8
      由 David Howells 提交于 
      Make pci_setup_device() write the bus ID directly into the allotted storage,
rather than using pci_name() as the address as that now returns a const
pointer.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
      8b285ce8
    • W
      PCI: Fix comment of pci_dynids · 9433f6dd
      由 Wang Chen 提交于 
      struct pci_driver has no field of driver_data.
It's in pci_device_id.
Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
      9433f6dd
    • K
      pciehp: use get_service_data · b9708940
      由 Kenji Kaneshige 提交于 
      Current pciehp driver saves its private data pointer into pci_dev
structure using pci_set_drvdata()/pci_get_drvdata(). But because
pciehp is not a pci device driver but a PCI Express service driver, it
should save its private data pointer into pcie_device structure using
set_service_data()/get_service_data().
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
      b9708940
    • K
      pciehp: remove needless command completed interrupt setting · 3aa50c44
      由 Kenji Kaneshige 提交于 
      Currently, pciehp driver enables command completed interrupt as follows.

(1) Don't enable at initialization.
(2) Enable command completed interrupt whenever pciehp issues a
    command, if the command doesn't attempt to disable the interrupt.
(3) Disable command completed interrupt at driver unloading.

Once we enable command completed interrupt, we don't need to re-enable
it for every command. So we can simplify above steps as follows:

(1) Enable command completed interrupt at initialization.
(2) No special sequence for command completed interrupt.
(3) Disable command completed interrupt at driver unloading.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
      3aa50c44
    • K
      pciehp: fix interrupt initialization · c4635eb0
      由 Kenji Kaneshige 提交于 
      Current pciehp driver's intialization sequence is as follows:

(1) initialize controller data structure
(2) install interrupt handler
(3) enable software notification
(4) initialize controller specific slot data structure
(5) initialize generic slot data structure and register it to pci hotplug core

The interrupt handler of pciehp assumes that controller specific slot
data structure is already initialized. However, it is installed at (2)
before initializing controller specific slot data structure at
(4). Because of this, pciehp driver cannot handle the following cases
properly.

- If devices that shares IRQ with pciehp raise interrupts between (2) and (4).
- If hotplug events (e.g. MRL open) happen between (3) and (4).

We already have a workaround for this problem ("pciehp: fix NULL
dereference in interrupt handler: dbd79aed).
But we still need fundamental fix.

This patch fix the problem by changing the initilization sequence as follows:

(1) initialize controller data structure
(2) initialize controller specific slot data structure
(3) install interrupt handler
(4) enable software notification
(5) initialize generic slot data structure and register it to pci hotplug core
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Acked-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
      c4635eb0
  7. 26 6月, 2008 10 次提交
  9. 17 6月, 2008 1 次提交
  11. 13 6月, 2008 2 次提交
    • R
      Suspend-related patches for 2.6.27 · d8f3de0d
      由 Rafael J. Wysocki 提交于 
      ACPI PM: Add possibility to change suspend sequence

There are some systems out there that don't work correctly with
our current suspend/hibernation code ordering.  Provide a workaround
for these systems allowing them to pass 'acpi_sleep=old_ordering' in
the kernel command line so that it will use the pre-ACPI 2.0 ("old")
suspend code ordering.

Unfortunately, this requires us to add a platform hook to the
resuming of devices for recovering the platform in case one of the
device drivers' .suspend() routines returns error code.  Namely,
ACPI 1.0 specifies that _PTS should be called before suspending
devices, but _WAK still should be called before resuming them in
order to undo the changes made by _PTS.  However, if there is an
error during suspending devices, they are automatically resumed
without returning control to the PM core, so the _WAK has to be
called from within device_resume() in that cases.

The patch also reorders and refactors the ACPI suspend/hibernation
code to avoid duplication as far as reasonably possible.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
      d8f3de0d
    • J
      Merge branch 'suspend' of... · 53eb2fbe
      由 Jesse Barnes 提交于 
      Merge branch 'suspend' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 into linux-next
      53eb2fbe
  13. 12 6月, 2008 3 次提交
  15. 11 6月, 2008 16 次提交