- 31 10月, 2012 1 次提交
-
-
HS and SS descriptors are staticaly created. They are updated during the bind process with the endpoint address, string id or interface numbers. After that, the descriptor chain is linked to struct usb_function which is used by composite in order to serve the GET_DESCRIPTOR requests, number of available configs and so on. There is no need to assign the HS descriptor only if the UDC supports HS speed because composite won't report those to the host if HS support has not been reached. The same reasoning is valid for SS. This patch makes sure each function updates HS/SS descriptors unconditionally and uses the newly introduced helper function to create a copy the descriptors for the speed which is supported by the UDC. While at that, also rename f->descriptors to f->fs_descriptors in order to make it more explicit what that means. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
- 04 5月, 2012 1 次提交
-
-
由 Paul Zimmerman 提交于
Add two isochronous endpoints to the gadget zero source/sink function. They are enabled by selecting alternate interface 1, so by default they are not enabled. Module parameters for setting all the isoc endpoint characteristics are also provided. Signed-off-by: NPratyush Anand <pratyush.anand@st.com> Signed-off-by: NPaul Zimmerman <paulz@synopsys.com> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
- 30 1月, 2012 1 次提交
-
-
由 Timo Juhani Lindfors 提交于
ab943a2e (USB: gadget: gadget zero uses new suspend/resume hooks) introduced a copy-paste error where f_loopback.c writes to a variable declared in f_sourcesink.c. This prevents one from creating gadgets that only have a loopback function. Cc: stable <stable@vger.kernel.org> Signed-off-by: NTimo Juhani Lindfors <timo.lindfors@iki.fi> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
- 10 9月, 2011 1 次提交
-
-
由 Klaus Schwarzkopf 提交于
remove the following two paragraphs as they are not needed: This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc.,59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. Signed-off-by: NKlaus Schwarzkopf <schwarzkopf@sensortherm.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 08 7月, 2011 1 次提交
-
-
由 Amit Blay 提交于
This patch adds SuperSpeed descriptors to the g_zero gadget. The SuperSpeed descriptors were added both for f_soursesink and f_loopback function drivers. Signed-off-by: NTatyana Brokhman <tlinder@codeaurora.org> Signed-off-by: NAmit Blay <ablay@codeaurora.org> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
- 29 6月, 2011 2 次提交
-
-
由 Tatyana Brokhman 提交于
Remove obsolete functions: 1. ep_choose() 2. usb_find_endpoint() Signed-off-by: NTatyana Brokhman <tlinder@codeaurora.org> Signed-off-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tatyana Brokhman 提交于
Change usb_ep_enable() prototype to use endpoint descriptor from usb_ep. This optimization spares the FDs from saving the endpoint chosen descriptor. This optimization is not full though. To fully exploit this change, one needs to update all the UDCs as well since in the current implementation each of them saves the endpoint descriptor in it's internal (and extended) endpoint structure. Signed-off-by: NTatyana Brokhman <tlinder@codeaurora.org> Signed-off-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 23 10月, 2010 2 次提交
-
-
由 Uwe Kleine-König 提交于
The bind function is most of the time only called at init time so there is no need to save a pointer to it in the configuration structure. This fixes many section mismatches reported by modpost. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> [m.nazarewicz@samsung.com: updated for -next] Signed-off-by: NMichał Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Michal Nazarewicz 提交于
This reverts a commit which proposed an invalid solution for a section mismatch. Next 3 commits will fix it correctly. Conflicts: drivers/usb/gadget/mass_storage.c Signed-off-by: NMichal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 11 8月, 2010 1 次提交
-
-
由 Michal Nazarewicz 提交于
In may gadgets bind and bind like functions were in a init section as they were only run during initialisation. However, being callback functions they were referenced from structures in “normal” sections. Changing the tag from “__init” to “__ref” fixes the warnings. Signed-off-by: NMichal Nazarewicz <m.nazarewicz@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 24 9月, 2009 1 次提交
-
-
由 Alexey Dobriyan 提交于
* remove asm/atomic.h inclusion from linux/utsname.h -- not needed after kref conversion * remove linux/utsname.h inclusion from files which do not need it NOTE: it looks like fs/binfmt_elf.c do not need utsname.h, however due to some personality stuff it _is_ needed -- cowardly leave ELF-related headers and files alone. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 3月, 2009 2 次提交
-
-
由 David Brownell 提交于
Use the new device-level suspend/resume hooks for Gadget Zero; always enable them with the OTG test mode; and support remote wakeup on both configurations even in non-OTG mode. This ensures that both configurations can pass the USBCV remote wakeup tests when the OTG test mode is enabled. This changes behavior by adding autoresume support to the loopback config even in non-OTG mode; the test failure was that it didn't work in OTG mode. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Harvey Harrison 提交于
The base versions handle constant folding now. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 18 10月, 2008 1 次提交
-
-
由 David Brownell 提交于
Offer a "how much VBUS power to request" configuration option for USB gadgets that aren't using board-specific customization of their gadget or (composite) configuration drivers. Also remove a couple pointless "depends on USB_GADGET" bits from the Kconfig text; booleans inside an "if USB_GADGET" will already have that dependency. Based on a patch from Justin Clacherty. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Justin Clacherty <justin@redfish-group.com> Tested-by: NRobert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 17 10月, 2008 1 次提交
-
-
由 David Brownell 提交于
Change how the Gadget Zero driver builds: don't use separate compilation, since it works poorly when key parts are library code (with init sections etc). Instead be as close as we can to "gcc --combine ...". Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 22 7月, 2008 1 次提交
-
-
由 David Brownell 提交于
This splits the gadget zero "loopback" configuration into a standalone "configuration driver", building on the composite gadget framework code. It doesn't yet pull the original code out of gadget zero or update how that driver is built. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-