To follow the prefix names used by the thermal functions,
this patch renames notify_thermal_framework to thermal_notify_framework.
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

The thermal governors are part of the thermal framework,
rather than a seperate feature/module.
Because the generic thermal layer can not work without
thermal governors, and it must load the thermal governors
during its initialization.

Build them into one module in this patch.

This also fix a problem that the generic thermal layer does not
work when CONFIG_THERMAL=m and CONFIG_THERMAL_GOV_XXX=y.
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Acked-by: NDurgadoss R <durgadoss.r@intel.com>

Because this feature is for debuging purposes, it is highly
recommended to do not enable this on production systems.
This patch adds warnings for system integrators, so that
people are aware of this potential security issue.
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

This patch adds support to set the emulated temperature method in
thermal zone (sensor). After setting this feature thermal zone may
report this temperature and not the actual temperature. The emulation
implementation may be based on sensor capability through platform
specific handler or pure software emulation if no platform handler defined.

This is useful in debugging different temperature threshold and its
associated cooling action. Critical threshold's cannot be emulated.
Writing 0 on this node should disable emulation.
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

This patch changes the function thermal_generate_netlink_event
to receive a thermal zone device instead of a originator id.

This way, the messages will always be bound to a thermal zone.
Signed-off-by: NEduardo Valentin <eduardo.valentin@ti.com>
Reviewed-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

This patch adds documentation for thermal_bind_params
and thermal_zone_params structures. Also, adds details
on EXPORT_SYMBOL APIs.
Signed-off-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

set upper and lower limits when binding
a thermal cooling device to a thermal zone device.
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Reviewed-by: NRafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: NEduardo Valentin <eduardo.valentin@ti.com>

With commit 6503e5df,
the value of /sys/class/thermal/thermal_zoneX/mode has been changed
from user/kernel to enabled/disabled.
Update the documentation so that users won't be confused.
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

The Linux Thermal Framework does not support hysteresis
attributes. Most thermal sensors, today, have a
hysteresis value associated with trip points.

This patch adds hysteresis attributes on a per-trip-point
basis, to the Thermal Framework. These attributes are
optionally writable.
Signed-off-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Some of the thermal drivers using the Generic Thermal Framework
require (all/some) trip points to be writeable. This patch makes
the trip point temperatures writeable on a per-trip point basis,
and modifies the required function call in thermal.c. This patch
also updates the Documentation to reflect the new change.
Signed-off-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

It doesn't seem right for the thermal subsystem to export a symbol
named generate_netlink_event. This function is thermal-specific and
its name should reflect that fact. Rename it to
thermal_generate_netlink_event.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NR.Durgadoss <durgadoss.r@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

This patch adds event notification support to the generic
thermal sysfs framework in the kernel. The notification is in the
form of a netlink event.
Signed-off-by: NR.Durgadoss <durgadoss.r@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Values below 1000 milli-celsius don't make sense and can cause the
system to go into a thermal heart attack: the actual temperature
will always be lower and thus the system will be throttled down to
its lowest setting.

An additional problem is that values below 1000 will show as 0 in
/proc/acpi/thermal/TZx/trip_points:passive.

cat passive
0
echo -n 90 >passive
bash: echo: write error: Invalid argument
echo -n 90000 >passive
cat passive
90000
Signed-off-by: NFrans Pop <elendil@planet.nl>
Acked-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NFrans Pop <elendil@planet.nl>
Acked-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

The document currently uses large indentations which make the text
too wide for easy readability. Also improve general consistency.
Signed-off-by: NFrans Pop <elendil@planet.nl>
Acked-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

Update the documentation for the thermal driver hwmon sys I/F.

Change the ACPI thermal zone type to be consistent with hwmon.
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Acked-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

From: Zhang Rui <rui.zhang@intel.com>

(reverting the previous sysfs patch also reverted a fix
 to the thermal units documentation, which is restored by this commit)

The generic thermal driver shows temperature in millidegree Celsius.
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

This reverts commit 3152fb9f.

This broke libsensors.
Acked-by: NZhang Rui <rui.zhang@intel.com>
Acked-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Reviewed-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

The Generic Thermal sysfs driver for thermal management.
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NThomas Sujith <sujith.thomas@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>