Low-power mode implementation for Lite5200b.
Some I/O registers are also saved here.

A recent U-Boot that supports this (lite5200b_PM_config) is needed.
Signed-off-by: NDomen Puncer <domen.puncer@telargo.com>
Signed-off-by: NSylvain Munaut <tnt@246tNt.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This patch adds DEFINE_SPUFS_ATTRIBUTE(), a wrapper around
DEFINE_SIMPLE_ATTRIBUTE which does the specified locking for the get
routine for us.

Unfortunately we need two get routines (a locked and unlocked version) to
support the coredump code.  This hides one of those (the locked version)
inside the macro foo.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Currently the spu coredump code doesn't respect the ulimit, it should.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Rework spufs_coredump_extra_notes_write() to check for and return errors.

If we're coredumping to a pipe we can't trust file->f_pos, we need to
maintain the foffset value passed to us. The cleanest way to do this is
to have the low level write routine increment foffset when we've
successfully written.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

To start with, arch_notes_size() etc. is a little too ambiguous a name for
my liking, so change the function names to be more explicit.

Calling through macros is ugly, especially with hidden parameters, so don't
do that, call the routines directly.

Use ARCH_HAVE_EXTRA_ELF_NOTES as the only flag, and based on it decide
whether we want the extern declarations or the empty versions.

Since we have empty routines, actually use them in the coredump code to
save a few #ifdefs.

We want to change the handling of foffset so that the write routine updates
foffset as it goes, instead of using file->f_pos (so that writing to a pipe
works).  So pass foffset to the write routine, and for now just set it to
file->f_pos at the end of writing.

It should also be possible for the write routine to fail, so change it to
return int and treat a non-zero return as failure.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Because spufs might be built as a module, we can't have other parts of the
kernel calling directly into it, we need stub routines that check first if the
module is loaded.

Currently we have two structures which hold callbacks for these stubs, the
syscalls are in spufs_calls and the coredump calls are in spufs_coredump_calls.
In both cases the logic for registering/unregistering is essentially the same,
so we can simplify things by combining the two.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Acked-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Acked-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The SPUFS attribute get routines take a void * because the generic attribute
code doesn't know what sort of data it's passing around.

However our internal __spufs_get_foo() routines can take a spu_context *
directly, which saves plonking it in and out of a void * again.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Acked-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The spufs_coredump_read array is NULL terminated, and we also store the size.
We only need one or the other, and the other arrays in file.c are NULL
terminated, so do that.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Because the SPU coredump code might be built as part of a module (spufs),
we have a stub which is called by the coredump code, this routine then calls
into spufs if it's loaded.

Unfortunately the stub returns -ENOSYS if spufs is not loaded, which is
interpreted by the coredump code as an extra note size of -38 bytes. This
leads to a corrupt core dump.

If spufs is not loaded there will be no SPU ELF notes to write, and so the
extra notes size will be == 0.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Acked-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The routine to dump the local store, __spufs_mem_read(), does not take the
spu_lslr_RW value into account - so we shouldn't check it when we're
calculating the size either.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Acked-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Unfortunately GDB expects some of the SPU coredump values to be identical
in format to what is found in spufs. This means we need to dump some of
the values as ASCII strings, not the actual values.

Because we don't know what the values will be, we always print the values
with the format "0x%.16lx", that way we know the result will be 19 bytes.

do_coredump_read() doesn't take a __user buffer, so remove the annotation,
and because we know that it's safe to just snprintf() directly to it.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The spufs_coredump_reader array contains the size of the data that will be
returned by the read routine.  Currently these are specified as literals,
and though some are obvious, sizeof(u32) == 4, others are not, 69 * 8 ==  ???

Instead, use sizeof() whatever type is returned by each routine, or in
the case of spufs_mem_read() the #define LS_SIZE.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

It makes sense to stop the SPU processes as soon as possible.  Also if we
dont acquire_saved() I think there's a possibility that the value in
csa.priv2.spu_lslr_RW won't be accurate.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Remove the ctx_info struct entirely, and also the ctx_info_list.  This
fixes a race where two processes can clobber each other's ctx_info structs.

Instead of using the list, we just repeat the search through the file
descriptor table.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Extract the logic for searching through the file descriptors for spu contexts
into a separate routine, coredump_next_context(), so we can use it elsewhere
in future.  In the process we flatten the for loop, and move the NOSCHED test
into coredump_next_context().
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

We don't want SPE programs to be able to flood the kernel log by
invoking the SPE callback handler, so don't enable DEBUG for
spu_callbacks.c by default.
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Based on an original patch from Masato Noguchi
<Masato.Noguchi@jp.sony.com>.

We're currently not restoring the SPE decrementer as specified by the
CBE handbook. This change fixes our implementation to match, and makes
the function read more like the docs.
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

spu_create and spu_run are wrapped by the cell syscall layer, so
we don't need the asmlinkage.
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

At present, a built-in spufs will not use the spufs_calls callbacks, but
directly call sys_spu_create.  This saves us an indirect branch, but
means we have duplicated functions - one for CONFIG_SPU_FS=y and one for
=m.

This change unifies the spufs syscall path, and provides access to the
spufs_calls structure through a get/put pair.  At present, the only user
of the spufs_calls structure is spu_syscalls.c, but this will facilitate
adding the coredump calls later.

Everyone likes numbers, right?  Here's a before/after comparison with
CONFIG_SPU_FS=y, doing spu_create(); close(); 64k times.

Before:
	[jk@cell ~]$ time ./spu_create
	performing 65536 spu_create calls

	real    0m24.075s
	user    0m0.146s
	sys     0m23.925s

After:
	[jk@cell ~]$ time ./spu_create
	performing 65536 spu_create calls

	real    0m24.777s
	user    0m0.141s
	sys     0m24.631s

So, we're adding around 11us per syscall, at the benefit of having
only one syscall path.
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Affinity reference point location (gang->aff_ref_spu) is reset
when the whole gang is descheduled. However, the last member of
a gang can be descheduled while we are trying to schedule another
member of the gang. This was leading to a race condition, and
the code was using gang->aff_ref_spu in an unsafe manner.

By holding the gang->aff_mutex a little bit longer, and increment
gang->aff_sched_count (which controls when gang->aff_ref_spu
should be reset) a little bit earlier, the problem is fixed.
Signed-off-by: NAndre Detsch <adetsch@br.ibm.com>
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

According to the comment in spufs_init_isolated_loader(), the isolated
loader should be aligned on a 16 byte boundary.
ARCH_{KMALLOC,SLAB}_MINALIGN is not defined so only 8 byte alignment is
guaranteed.

This enforces alignment via __get_free_pages.
Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Based on an initial patch from Sebastian Siewior
<sebastian@breakpoint.cc>

spu_harvest isn't used, remove it.
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

do_spu_create doesn't need the asmlinkage qualifier; remove it.
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

There are a few symbols used only in one file within spufs; this change
makes them static where suitable.
Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

drivers/serial/pmac_zilog.c:1590: warning: format '%d' expects type 'int', but argument 3 has type 'pm_message_t'
Signed-off-by: NOlaf Hering <olaf@aepfle.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

After talking to an IBM POWER hypervisor (PHYP) design and development
guy, there seems to be no need for memory barriers when updating the SLB
shadow buffer provided we only update it from the current CPU, which we
do.

Also, these guys see no need in the future for these barriers.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

kmalloc() returns a void pointer so there is absolutely no need to
cast it in ibmebus_chomp().
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Current status of APUS:
- arch/powerpc/: removed in 2.6.23
- arch/ppc/: marked BROKEN since 2 years

This therefore removes the remaining parts of APUS support from
arch/ppc, include/asm-ppc, arch/powerpc and include/asm-powerpc.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Enabled using SPI controller on the MPC832x RDB board.  We currently use
a modalias of "spidev" as a place holder (replace with "mmc_spie") until
the mmc_spi driver support is merged in.

This gets us the ability to test SPI until then.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Add helper function to setup SPI bus/device information
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Use idx as index into mpc52xx_uart_nodes instead of i
Signed-off-by: NJohn Rigby <jrigby@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The current definition of struct ccsr_guts in immap_86xx.h was for 85xx.
This patch fixes that and replaces the vague integer types with sized types
of the correct endianness.  The unused struct ccsr_pci is also deleted.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This patch adds the clrsetbits_xxx() macros, which are used to set and clear
multiple bits in a single read-modify-write operation.  Specify the bits to
clear in the 'clear' parameter and the bits to set in the 'set' parameter.
These macros can also be used to set a multiple-bit bit pattern using a mask,
by specifying the mask in the 'clear' parameter and the new bit pattern in the
'set' parameter.  There are big-endian and little-endian versions for 8, 16,
32, and 64 bits.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This is needed to configure and control QE pario pins from the kernel.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

These I/O accessors will be used in code under drivers/,
which is expected to still work in arch/ppc.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

We get warnings like the following from the various ppc32 head*.S files:

WARNING: vmlinux.o(.text+0x358): Section mismatch: reference to .init.text:early_init (between 'skpinv' and 'interrupt_base')
WARNING: vmlinux.o(.text+0x380): Section mismatch: reference to .init.text:machine_init (between 'skpinv' and 'interrupt_base')
WARNING: vmlinux.o(.text+0x384): Section mismatch: reference to .init.text:MMU_init (between 'skpinv' and 'interrupt_base')
WARNING: vmlinux.o(.text+0x3aa): Section mismatch: reference to .init.text:start_kernel (between 'skpinv' and 'interrupt_base')
WARNING: vmlinux.o(.text+0x3ae): Section mismatch: reference to .init.text:start_kernel (between 'skpinv' and 'interrupt_base')

Added a .text.head section simliar to what other architectures do since
modpost already excludes this from its warnings.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Make it so that SPE support can be determined at runtime.  This is similiar
to how we handle AltiVec.  This allows us to have SPE support built in and
work on processors with and without SPE.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Now that the generic code doesn't assign resources for Freescale
PHBs we dont have to explicitly exclude it.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Updated the device trees to have the PCI nodes be at the same level as
the SOC node.  This is to make it so that the SOC nodes children address
space is just on chip registers and not other bus memory as well.

Also, for PCIe nodes added a P2P bridge to handle the virtual P2P bridge
that exists in the PHB.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>