remove excess spacing from the tda_foo printk macros & line things up better
Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Rename dprintk to tda_dprintk to be consistent with the other tda_foo macros.

Move KERN_DEBUG facility level to tda_dprintk.
Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

For the bandwidth to be less than 8 MHZ and greater than 6 MHZ is logically
impossible.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDouglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Added support to AverMedia Studio 505

[dougsland@redhat.com: fixed rejects and removed the change to add dk as default secam variant]
[mchehab@redhat.com: fix a few CodingStyle issues]
Signed-off-by: NVasiliy Temnikov <vaka@newmail.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDouglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Implement Philips FM1216MK5.

1. Implement get_stereo function.
2. Add correct data byte for FM radio mode
Signed-off-by: NBeholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: NDouglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

KEY_CAMERA is already used for a long time with webcam drivers to take a picture.
On other media drivers, due to the lack of a snapshot button, random KEY codes
were sent, being KEY_SHUFFLE the most used one, probably due to cut-and-paste
from other remotes, since one of them uses the same key for snapshot and shuffle.

The better is to use KEY_CAMERA on all drivers solving this issue. This
follows the IR standard map as defined at:
	http://linuxtv.org/wiki/index.php/Remote_ControllersSigned-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Use standard definitions for channel controls, as defined at:
	http://linuxtv.org/wiki/index.php/Remote_Controllers

While here, fix a few broken up/down/left/right mappings
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Each remote were using a different keycode for timeshift. Use the same
keycode for all of them, using the map as defined at:
	http://linuxtv.org/wiki/index.php/Remote_ControllersSigned-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

There are several IR's that were using IR to type a letter that it is
known by some random application. Instead, the better is to use
the standard definitions found at:
	http://linuxtv.org/wiki/index.php/Remote_Controllers

And, if needed, submit a patch for the application to understand the
media keys.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

While we're still discussing it, let's point to the wiki page. In
the future, this should be added at V4L2 API spec DocBooks.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This is needed to match the standard mapping defined at:
	http://linuxtv.org/wiki/index.php/Remote_Controllers#Remote_ControllersSigned-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Make Checkpatch tool happy:

-:2349: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable

On all cases, it were just a blank line at the wrong place. Yet, fixing it is trivial
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The ir-keymaps.c has frequent additions. As people tend to copy an old
keyboard entry, a bad CodingStyle at an ancient entry may result on a
freshly bad CodingStyle patch.

So, better to fix the CodingStyle for the entire file.

This patch is the first of a series of patches fixing it, generated by
some perl magic plus manual handling.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch adds a document file for si4713 device driver.
It describes the driver interfaces and organization.
Signed-off-by: NEduardo Valentin <eduardo.valentin@nokia.com>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Simply add Makefile and Kconfig entries.

[hverkuil@xs4all.nl: auto-select I2C_SI4713]
Signed-off-by: NEduardo Valentin <eduardo.valentin@nokia.com>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch adds files to control si4713 devices.
Internal functions to control device properties
and initialization procedures are into these files.
Also, a v4l2 subdev interface is also exported.
This way other drivers can use this as v4l2 i2c subdevice.
Signed-off-by: NEduardo Valentin <eduardo.valentin@nokia.com>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch adds files which creates the radio interface
for si4713 FM transmitter (modulator) devices.

In order to do the real access to device registers, this
driver uses the v4l2 subdev interface exported by si4713 i2c driver.
Signed-off-by: NEduardo Valentin <eduardo.valentin@nokia.com>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch adds basic configurations for FM TX extended controls.
That includes controls names, menu strings, pointer identification,
type classification and flags configuration.
Signed-off-by: NEduardo Valentin <eduardo.valentin@nokia.com>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch adds a new class of extended controls. This class
is intended to support FM Radio Modulators properties such as:
rds, audio limiters, audio compression, pilot tone generation,
tuning power levels and preemphasis properties.
Signed-off-by: NEduardo Valentin <eduardo.valentin@nokia.com>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NEduardo Valentin <eduardo.valentin@nokia.com>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The upcoming RDS encoder needs support for string controls. This patch
implements the core implementation.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

With the recent improvements we don't need to probe anymore, if we know
the i2c address of the receiver.

The address of the receiver for the remote with the gray buttons is not
confirmed anywhere, but it is very unlikely to see it on something else.

We want to have that information anyway.

BTW, those remaining still probing, please join.
Signed-off-by: Nhermann pitton <hermann-pitton@arcor.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch removes an unneeded power management primitive.
Power management is automatically enabled as probe ends.
Signed-off-by: NOliver Neukum <oliver@neukum.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

There are several reasons:

 - SAA7133/35 uses DDEP (DemDec Easy Programming mode), which works in 32kHz
   only
 - SAA7134 for TV mode uses DemDec mode (32kHz)
 - Radio works in 32kHz only
 - When recording 48kHz from Line1/Line2, switching of capture source to TV
   means switching to 32kHz without any frequency translation
Signed-off-by: NOldřich Jedlička <oldium.pro@seznam.cz>
Acked-by: Nhermann pitton <hermann-pitton@arcor.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

I just happen to peek inside the PWC driver and did not like what I saw
there. Please consider applying the patch below.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add config of RDS part for the BeholdTV tuners.
Signed-off-by: NBeholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fix error for AC-3 control of the 6752HS MPEG-2 coder.
Signed-off-by: NBeholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

It does matter to set explicitly gpio0 value in
cx88_board structure for TBS 8920 card.
Signed-off-by: NIgor M. Liplianin <liplianin@me.by>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Makes zl10353 a bit more DVB API compliant:
FE_READ_UNCORRECTED_BLOCKS - keep a counter of UNC blocks
FE_GET_FRONTEND - return last set frequency instead of zero
Signed-off-by: NAleksandr V. Piskunov <alexandr.v.piskunov@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d
but is perhaps more readable.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@haskernel@
@@

@depends on haskernel@
expression x,__divisor;
@@

- (((x) + ((__divisor) / 2)) / (__divisor))
+ DIV_ROUND_CLOSEST(x,__divisor)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The AVC protocol uses the same command for tuning and PID filtering and
since dvb-core uses a software zigzagging to do automatic retuning this
could cause all PID filters to be cleared.  PID filter information is
now included in all DSD commands to the card.

Background:

There is a problem in the firedtv driver that causes recordings to stop
if the SW zigzag algorithm in dvb-core kicks in with a retune after the
application has set up the PID filters.  Since tuning and setting PID
filters uses the same AVC command (DSD) and only the replace subfunction
is supported by the card, it is not possible to do a retune without
setting the PID filters.  This means that the PID filtering has to be
sent in each tune.

This problem applies to C and T cards since S and S2 cards tune using a
vendor specific command.  The patch corrects the problem by sending the
PID list in each tune.  I have tested it on my T card with a good
result.

How to trigger problem:  Zap to a channel and output AV to a file, e.g.
"tzap -c channels.conf SVT1 -r -o SVT1.ts".  After a short while, pull
the antenna cable from the card.  The lock on the channel will disappear
and the TS file will stop increasing in size. Wait a couple of seconds.
Replug the cable again.  You will get a lock on the channel again, but
the TS file will never increase in size agains sinze no PIDS are
filtered.

Tested with kaffeine with DVB-T and DVB-C:  Fixes retuning after antenna
was plugged out and back in with DVB-T.  Does not fix this with DVB-C,
but also doesn't regress on DVB-C.
Signed-off-by: NHenrik Kurelid <henrik@kurelid.se>
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Attached is a patch which fixes tuning to low frequency channels with
stb0899+tda8261 cards like the KNC TV-Station DVB-S2.
The cause of the issue was a broken if construct, which should have been
an if/else if, so that the setting for the lowest matching frequency is
applied.

Without this patch for example tuning to "arte" on Astra 19.2, 10744MHz
SR22000 failed most times and when it failed the communication between
driver and tda8261 was completely broken.
This problem disappears with the attached patch.
Signed-off-by: NJulian Scheel <julian@jusst.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add new USB ID (1b80:e400) for KWorld PlusTV Dual DVB-T Stick (DVB-T 399U).
The model number on the devices sticker label is "KW-DVB-T 399UR".
Signed-off-by: NMart Raudsepp <mart.raudsepp@artecdesign.ee>
Acked-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

These changes were a direct result of using a semantic patch
More information can be found at http://www.emn.fr/x-info/coccinelle/

[mchehab@redhat.com: fix a merge conflict]
Signed-off-by: NStoyan Gaydarov <sgayda2@uiuc.edu>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

It seems from other code that it is the dst_type field rather than the
type_flags field that contains values of the form DST_TYPE_IS...
The type_flags field contains values of the form DST_TYPE_HAS...

The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@ struct dst_state E; @@

(
*E.type_flags ==
  \( DST_TYPE_IS_SAT\|DST_TYPE_IS_TERR\|DST_TYPE_IS_CABLE\|DST_TYPE_IS_ATSC \)
|
*E.type_flags !=
  \( DST_TYPE_IS_SAT\|DST_TYPE_IS_TERR\|DST_TYPE_IS_CABLE\|DST_TYPE_IS_ATSC \)
)
// </smpl>

Cc: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch adds support for Humax/Coex DVB-T USB Stick 2.0 High Speed
which is a very popular tuner sold in Vietnam.
Tested with at least 3 tuners.

Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: NPham Thanh Nam <phamthanhnam.ptn@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

It were using 7 spaces instead of tab for indent.

Cc: Janne Grunau <j@jannau.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

It were using 7 spaces instead of tab for indent.

Cc: Erik Andren <erik.andren@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>