Each gt contains an independent instance of pcode. Extend pcode functions
to interface with pcode on different gt's. To avoid creating dependency of
display functionality on intel_gt, pcode function interfaces are exposed in
terms of uncore rather than intel_gt. Callers have been converted to pass
in the appropritate (i915 or intel_gt) uncore to the pcode functions.

v2: Expose pcode functions in terms of uncore rather than gt (Jani/Rodrigo)
v3: Retain previous function names to eliminate needless #defines (Rodrigo)
v4: Move out i915_pcode_init() to a separate patch (Tvrtko)
    Remove duplicated drm_err/drm_dbg from intel_pcode_init() (Tvrtko)

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: NAshutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NAndi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519085732.1276255-2-tvrtko.ursulin@linux.intel.com
[tursulin: fixup merge conflict]

Media ratio mode (the ability for media IP to work at a different frequency
from the GT) is available for a subset of dGfx platforms supporting
GuC/SLPC. Introduce 'has_media_ratio_mode' flag in intel_device_info to
identify these platforms and set it for XEHPSDV and DG2/ATS-M.
Signed-off-by: NAshutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NAndi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519085732.1276255-1-tvrtko.ursulin@linux.intel.com
[tursulin: fixup merge conflict]

Use REG_GENMASK() and REG_FIELD_PREP() to avoid errors due to
-fsanitize=shift.

References: https://lore.kernel.org/r/20220405151517.29753-12-bp@alien8.deReported-by: NBorislav Petkov <bp@suse.de>
Reported-by: NRuiqi GONG <gongruiqi1@huawei.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220518113315.1305027-1-jani.nikula@intel.com

Current update area calculation is not handling situation where
e.g. cursor plane is fully or partially outside pipe area.

Fix this by checking damage area against pipe_src area using
drm_rect_intersect.

v2: Set x1 and x2 in damaged_area initialization
v3: Move drm_rect_intersect into clip_area_update
v4: draw_area -> pipe_src

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5440
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NJouni Högander <jouni.hogander@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220513142811.779331-3-jouni.hogander@intel.com

Currently we have some corner cases where area calculation fails.  For
these sel fetch area calculation ends up having update area as y1 = 0,
y2 = 4. Instead of these values safer option is full update.

One of such for example is big fb with offset. We don't have usable
offset in psr2_sel_fetch_update. Currently it's open what is the
proper way to fix this corner case. Use full update for now.

v2: Commit message modified
v3: Print out debug info once when area calculation fails
v4: Use drm_info_once
v5: pipeA -> "pipe %c", pipe_name(crtc-pipe)

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: NJouni Högander <jouni.hogander@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220513142811.779331-2-jouni.hogander@intel.com

RPM suspend/resume also supported on gfx platforms which doesn't have
kms support and even on platforms without any connected display panel.
There is no good reason to log rpm suspend/resume debug message with
drm_dbg_kms() therefore changing it to drm_dbg().
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: NAshutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511130455.22028-1-anshuman.gupta@intel.com

Need to use pipe_name(pipe) instead of pipe directly.

Fixes: 1f31e35f ("drm/i915/audio: unify audio codec enable/disable debug logging")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220512161638.272601-1-jani.nikula@intel.com

Bspec has added some steps that check forDMC MMIO range before
programming them

v2: Fix for CI
v3: move register defines to .h (Anusha)
- Check MMIO restrictions per pipe
- Add MMIO restricton for v1 dmc header as well (Lucas)
v4: s/_PICK/_PICK_EVEN and use it only for Pipe DMC scenario.
- clean up sanity check logic.(Lucas)
- Add MMIO range for RKL as well.(Anusha)
v5: Use DISPLAY_VER instead of per platform check (Lucas)

BSpec: 49193

Cc: stable@vger.kernel.org
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511000847.1068302-1-anusha.srivatsa@intel.com

Fix the following sparse warnings:

drivers/gpu/drm/i915/display/intel_display_power.c:2431:34: warning: mixing different enum types:
drivers/gpu/drm/i915/display/intel_display_power.c:2431:34:    unsigned int enum intel_display_power_domain
drivers/gpu/drm/i915/display/intel_display_power.c:2431:34:    int enum port
drivers/gpu/drm/i915/display/intel_display_power.c:2442:37: warning: mixing different enum types:
drivers/gpu/drm/i915/display/intel_display_power.c:2442:37:    unsigned int enum intel_display_power_domain
drivers/gpu/drm/i915/display/intel_display_power.c:2442:37:    int enum port
drivers/gpu/drm/i915/display/intel_display_power.c:2468:43: warning: mixing different enum types:
drivers/gpu/drm/i915/display/intel_display_power.c:2468:43:    unsigned int enum intel_display_power_domain
drivers/gpu/drm/i915/display/intel_display_power.c:2468:43:    unsigned int enum aux_ch
drivers/gpu/drm/i915/display/intel_display_power.c:2479:35: warning: mixing different enum types:
drivers/gpu/drm/i915/display/intel_display_power.c:2479:35:    unsigned int enum intel_display_power_domain
drivers/gpu/drm/i915/display/intel_display_power.c:2479:35:    unsigned int enum aux_ch

Fixes: 979e1b32 ("drm/i915: Sanitize the port -> DDI/AUX power domain mapping for each platform")
Reported-by: NJani Nikula <jani.nikula@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220510114957.406070-1-imre.deak@intel.com

Add Support for DC states on Dg2.

v2: Add dc9 as the max supported DC states and disable DC5.
v3: set max_dc to 0. (Imre)

Cc: Imre Deak <imre.deak@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>(v1)
Signed-off-by: NImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504202213.740200-2-anusha.srivatsa@intel.com

Reduce the magic of what's going on in GEM_DEBUG_EXEC() by expanding it
inline and being explicit about it. It's as single use case anyway, so
the macro feels overkill.

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504183716.987793-2-jani.nikula@intel.com

There are already too many choices here, take away the unused ones.

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504183716.987793-1-jani.nikula@intel.com

Make sure our choice of downclock mode respects the VBT
seameless DRRS min refresh rate limit.

v2: s/vrefesh/vrefresh/ (Jani)
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-10-ville.syrjala@linux.intel.com

Extract the seamless DRRS min refresh rate from the VBT.

v2: Do a version check
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-9-ville.syrjala@linux.intel.com

Make the panel type code a bit more abstract along the
lines of the source of the panel type. For the moment
we have three classes: OpRegion, VBT, fallback.
Well introduce another one shortly.

We can now also print out all the different panel types,
and indicate which one we ultimately selected. Could help
with debugging.

v2: Add .get_panel_type() vfunc (Jani)
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-8-ville.syrjala@linux.intel.com

Pull the code to determine the panel type into its own set of
sane functions.

v2: rebase
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-7-ville.syrjala@linux.intel.com

Just assume panel_type==0 always if the VBT gives us bogus data.
We actually already do this everywhere else except in
parse_panel_options() since we just leave i915->vbt.panel_type
zeroed. This also seems to be what Windows does.
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-6-ville.syrjala@linux.intel.com

Document the fact that struct lvds_lfp_data_entry can't be used
directly and instead must be accessed via the data table pointers.

Also remove the bogus comment implying that there might be a
variable number of panel entries in the table. There are always
exactly 16.
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-5-ville.syrjala@linux.intel.com

We need to start parsing stuff from the tail end of the LFP data block.
This is made awkward by the fact that the fp_timing table has variable
size. So we must use a bit more finesse to get the tail end, and to
make sure we allocate enough memory for it to make sure our struct
representation fits.

v2: Rebase due to the preallocation of BDB blocks
v3: Rebase due to min_size WARN relocation
v4: Document BDB_LVDS_LFP_DATA vs. BDB_LVDS_LFP_DATA_PTRS order (Jani)
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-4-ville.syrjala@linux.intel.com

Modern VBTs no longer contain the LFP data table pointers
block (41). We are expecting to have one in order to be able
to parse the LFP data block (42), so let's make one up.

Since the fp_timing table has variable size we must somehow
determine its size. Rather than just hardcode it we look for
the terminator bytes (0xffff) to figure out where each table
entry starts. dvo_timing, panel_pnp_id, and panel_name are
expected to have fixed size.

This has been observed on various machines, eg. TGL with BDB
version 240, CML with BDB version 231, etc. The most recent
VBT I've observed that still had block 41 had BDB version
228. So presumably the cutoff (if an exact cutoff even exists)
is somewhere around BDB version 229-231.

v2: kfree the thing we allocated, not the thing+3 bytes
v3: Do the debugprint only if we found the LFP data block
v4: Fix t0 null check (Jani)
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-3-ville.syrjala@linux.intel.com

Reorder things so that we can parse the entier LFP data block
in one go. For now we just stick to parsing the DTD from it.

Also fix the misleading comment about block 42 being deprecated.
Only the DTD part is deprecated, the rest is still very much needed.

v2: Move the version check+comment into parse_generic_dtd() (Jani)
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504150440.13748-2-ville.syrjala@linux.intel.com

Initialize on-stack modes with drm_mode_init() to guarantee
no stack garbage in the list head, or that we aren't copying
over another mode's list head.

Based on the following cocci script, with manual fixups:
@decl@
identifier M;
expression E;
@@
- struct drm_display_mode M = E;
+ struct drm_display_mode M;

@@
identifier decl.M;
expression decl.E;
statement S, S1;
@@
struct drm_display_mode M;
... when != S
+ drm_mode_init(&M, &E);
+
S1

@@
expression decl.E;
@@
- &*E
+ E
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-19-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>

Make sure each DDI platform has sane ->get_buf_trans initialized.
Suggested-by: NMatt Roper <matthew.d.roper@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NArun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220503082134.4128355-1-jani.nikula@intel.com

Using compound literals for initialization can be tricky. Lacking a
const qualifier, they won't end up in rodata, which is probably not
expected or intended. Add const to move a whopping 136 initializers to
rodata.

Compare:

$ objdump --syms drivers/gpu/drm/i915/display/intel_display_power_map.o | grep "\.rodata.*__compound_literal"
$ objdump --syms drivers/gpu/drm/i915/display/intel_display_power_map.o | grep "\.data.*__compound_literal"

Before and after the change.

Fixes: c32ffce4 ("drm/i915: Convert the power well descriptor domain mask to an array of domains")
Fixes: 4a845ff0 ("drm/i915: Simplify power well definitions by adding power well instances")
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220429142140.2671828-1-jani.nikula@intel.com

gvt-next-2022-04-29

Introduce fixes from previous pull.
- Fix a compiling warning of non-static funtion only having one caller.
- Fix a potential NULL pointer reference in the code re-factor.
- Fix a compiling error when CONFIG_DRM_I915_DEBUG_RUNTIME_PM=n
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
From: "Wang, Zhi A" <zhi.a.wang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9c2fc678-2e6e-a9d5-a540-2a6bfda31196@intel.com

Fix following coccicheck error:
./drivers/gpu/drm/i915/gvt/handlers.c:2925:35-41: ERROR: block is NULL but dereferenced.

Use gvt->mmio.mmio_block instead of block to avoid NULL pointer
dereference when find_mmio_block returns NULL.

Fixes: e0f74ed4 ("i915/gvt: Separate the MMIO tracking table from GVT-g")
Signed-off-by: NWan Jiabing <wanjiabing@vivo.com>
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220427115457.836729-1-wanjiabing@vivo.comReviewed-by: NZhi Wang <zhi.a.wang@intel.com>

A compiling error was reported when CONFIG_DRM_I915_DEBUG_RUNTIME_PM=n.
Fix the problem by using the pre-defined macro.

Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220427212849.18109-2-zhi.a.wang@intel.comReviewed-by: NJani Nikula <jani.nikula@linux.intel.com>

After the refactor of GVT-g, the reference of intel_gvt_match_device()
only happens in handlers.c. Make it static to let the compiler be
happy.

Fixes: e0f74ed4 ("i915/gvt: Separate the MMIO tracking table from GVT-g")
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Robert Beckett <bob.beckett@collabora.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220427212849.18109-1-zhi.a.wang@intel.comReviewed-by: NCc: Jani Nikula <jani.nikula@linux.intel.com>

The IDs added here are the subset reserved for 'motherboard down'
designs of DG2.  We have all the necessary support upstream to enable
these now (although they'll continue to require force_probe until the
usual requirements are met).

The remaining DG2 IDs for add-in cards will come in a future patch once
some additional required functionality has fully landed.

Bspec: 44477
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220425211251.77154-3-matthew.d.roper@intel.com

To avoid AUX timeouts and subsequent spurious hotplug interrupts, make
sure that the first DPCD access during detection is a read from an LTTPR
register.

Some ADLP DP link configuration at least with multiple LTTPRs expects
the first DPCD access during the LTTPR/DPCD detection after hotplug to
be a read from the LTTPR range starting with
DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV. The side effect of
this read is to put each LTTPR into the LTTPR transparent or LTTPR
non-transparent mode.

The lack of the above read may leave some of the LTTPRs in non-LTTPR
mode, while other LTTPRs in LTTPR transparent or LTTPR non-transparent
mode (for instance LTTPRs after system suspend/resume that kept their
mode from before suspend). Due to the different AUX timeouts the
different modes imply, the DPCD access from a non-LTTPR range will
timeout and lead to an LTTPR generated hotplug towards the source (which
the LTTPR firmware uses to account for buggy TypeC adapters with a long
wake-up delay).

SYSCROS: 72939

v2: Keep DPCD read-out working on non-LTTPR platforms.
v3: Summarize what and why the patch does at the beginning of the commit
    log. (Jani)
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220408224629.845887-1-imre.deak@intel.com

Need to bring commit d8bb92e7 ("drm/dp: Factor out a function to
probe a DPCD address") back as a dependency to further work in
drm-intel-next.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

gvt-next-2022-04-26

- Add two missing exports of symbols when i915 debug is enabled
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
From: "Wang, Zhi A" <zhi.a.wang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c5cf6773-e7a2-8ba8-4cde-0bb14007bc6b@intel.com

When CONFIG_DRM_I915_DEBUG_RUNTIME and CONFIG_DRM_I915_DEBUG_PM
are enabled, two more extra symols in i915 are required to be
exported.

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220425220331.24865-1-zhi.a.wang@intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>

Start splitting the .compute_crtc_clock() into two parts; one
part does the computation, the second part does the shared dpll
assignment. I want to move the actual computation part much earlier
into the compute_config() phase.

v2: dg2_crtc_get_shared_dpll() not needed (Jani)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220325123205.22140-10-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>

DG2 doesn't currently used the shared_dpll stuff so let's just
split it out from hsw_crtc_compute_clock() entirely.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220325123205.22140-9-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>

Clear the dpll_hw_state when we're about disable the pipe.
Previously it looks like we just left the old junk in there.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220325123205.22140-8-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>

All .crtc_compute_clock() implementations do the same memset() to
clear the dpll_hw_state (since we preserve it across
intel_crtc_prepare_cleared_state()). Move the memset() to the common
wrapper.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220325123205.22140-7-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>

Move some checks into intel_dpll_crtc_compute_clock() from the
caller. Avoids the caller from having to worry about all this
crap.

We'll also reorder the hw.enable vs. shared_dpll checks since
it makes sense to sanity check that we've cleared out the
old shared_dpll even if the pipe is getting disabled.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220325123205.22140-6-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>

Pass the full atomic state+crtc rather than the redundant
crtc+crtc_state pair. We already need the full atomic state
in the hsw+ codepath anyway.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220325123205.22140-5-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>

All platforms have dpll_funcs. Remove the pointless NULL checks.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220325123205.22140-4-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>