- 28 2月, 2013 2 次提交
-
-
由 Sasha Levin 提交于
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: NPeter Senna Tschudin <peter.senna@gmail.com> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NSasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stephen Rothwell 提交于
Change it to CONFIG_HAVE_VIRT_TO_BUS and set it in all architecures that already provide virt_to_bus(). Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: NJames Hogan <james.hogan@imgtec.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: H Hartley Sweeten <hartleys@visionengravers.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 2月, 2013 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 25 2月, 2013 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 24 2月, 2013 5 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Tang Chen 提交于
Introduce a new API vmemmap_free() to free and remove vmemmap pagetables. Since pagetable implements are different, each architecture has to provide its own version of vmemmap_free(), just like vmemmap_populate(). Note: vmemmap_free() is not implemented for ia64, ppc, s390, and sparc. [mhocko@suse.cz: fix implicit declaration of remove_pagetable] Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: NJianguo Wu <wujianguo@huawei.com> Signed-off-by: NWen Congyang <wency@cn.fujitsu.com> Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NMichal Hocko <mhocko@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yasuaki Ishimatsu 提交于
For removing memmap region of sparse-vmemmap which is allocated bootmem, memmap region of sparse-vmemmap needs to be registered by get_page_bootmem(). So the patch searches pages of virtual mapping and registers the pages by get_page_bootmem(). NOTE: register_page_bootmem_memmap() is not implemented for ia64, ppc, s390, and sparc. So introduce CONFIG_HAVE_BOOTMEM_INFO_NODE and revert register_page_bootmem_info_node() when platform doesn't support it. It's implemented by adding a new Kconfig option named CONFIG_HAVE_BOOTMEM_INFO_NODE, which will be automatically selected by memory-hotplug feature fully supported archs(currently only on x86_64). Since we have 2 config options called MEMORY_HOTPLUG and MEMORY_HOTREMOVE used for memory hot-add and hot-remove separately, and codes in function register_page_bootmem_info_node() are only used for collecting infomation for hot-remove, so reside it under MEMORY_HOTREMOVE. Besides page_isolation.c selected by MEMORY_ISOLATION under MEMORY_HOTPLUG is also such case, move it too. [mhocko@suse.cz: put register_page_bootmem_memmap inside CONFIG_MEMORY_HOTPLUG_SPARSE] [linfeng@cn.fujitsu.com: introduce CONFIG_HAVE_BOOTMEM_INFO_NODE and revert register_page_bootmem_info_node()] [mhocko@suse.cz: remove the arch specific functions without any implementation] [linfeng@cn.fujitsu.com: mm/Kconfig: move auto selects from MEMORY_HOTPLUG to MEMORY_HOTREMOVE as needed] [rientjes@google.com: fix defined but not used warning] Signed-off-by: NWen Congyang <wency@cn.fujitsu.com> Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Reviewed-by: NWu Jianguo <wujianguo@huawei.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NMichal Hocko <mhocko@suse.cz> Signed-off-by: NLin Feng <linfeng@cn.fujitsu.com> Signed-off-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Wen Congyang 提交于
For removing memory, we need to remove page tables. But it depends on architecture. So the patch introduce arch_remove_memory() for removing page table. Now it only calls __remove_pages(). Note: __remove_pages() for some archtecuture is not implemented (I don't know how to implement it for s390). Signed-off-by: NWen Congyang <wency@cn.fujitsu.com> Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Phileas Fogg 提交于
Disable hard IRQ before kexec a new kernel image. Not doing it can result in corrupted data in the memory segments reserved for the new kernel. Signed-off-by: NPhileas Fogg <phileas-fogg@mail.ru> CC: <stable@vger.kernel.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 23 2月, 2013 2 次提交
-
-
由 Al Viro 提交于
NOTE: this really needs testing - I could've easily fucked up refcounting in there. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 20 2月, 2013 2 次提交
-
-
由 Harninder Rai 提交于
Signed-off-by: NHarninder Rai <harninder.rai@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Harninder Rai 提交于
BSC9131RDB doesn't have SDHC enabled. As a result of this typo, the node was not getting disabled from the device tree which was leading to linux hang during bootup Signed-off-by: NHarninder Rai <harninder.rai@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 16 2月, 2013 6 次提交
-
-
由 Scott Wood 提交于
The MPIC code will disable coreint if it detects an insufficient MPIC version. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Scott Wood 提交于
This will be used by the qemu-e500 platform, as the MPIC version (and thus whether we have coreint) depends on how QEMU is configured. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Varun Sethi 提交于
The pci controller structure has a provision to store the device structure pointer of the corresponding platform device. Currently this information is not stored during fsl pci controller initialization. This information is required while dealing with iommu groups for pci devices connected to the fsl pci controller. For the case where the pci devices can't be paritioned, they would fall under the same device group as the pci controller. This patch stores the platform device information in the pci controller structure during initialization. Signed-off-by: NVarun Sethi <Varun.Sethi@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Stef van Os 提交于
Initial board support for the Prodrive PPA8548 AMC module. Board is an MPC8548 AMC platform used in RapidIO systems. This module is also used to test/work on mainline linux RapidIO software. PPA8548 overview: - 1.3 GHz Freescale PowerQUICC III MPC8548 processor - 1 GB DDR2 @ 266 MHz - 8 MB NOR flash - Serial RapidIO 1.2 - 1 x 10/100/1000 BASE-T front ethernet - 1 x 1000 BASE-BX ethernet on AMC connector Signed-off-by: NStef van Os <stef.van.os@prodrive.nl> Acked-by: NTimur Tabi <timur@tabi.org> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Timur Tabi 提交于
The Freescale DIU driver was recently updated to not require every DIU platform function, so now we can remove the unneeded functions from some boards. Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Julia Lawall 提交于
Delete successive tests to the same location. The code tested the result of a previous call, that itself was already tested. It is changed to test the result of the most recent call. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @s exists@ local idexpression y; expression x,e; @@ *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } ... when != \(y = e\|y += e\|y -= e\|y |= e\|y &= e\|y++\|y--\|&y\) when != \(XT_GETPAGE(...,y)\|WMI_CMD_BUF(...)\) *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 15 2月, 2013 21 次提交
-
-
由 Michael Neuling 提交于
Signed-off-by: NMatt Evans <matt@ozlabs.org> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
Kconfig option for transactional memory on powerpc. Signed-off-by: NMatt Evans <matt@ozlabs.org> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
Signed-off-by: NMatt Evans <matt@ozlabs.org> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
This adds the new transactional memory archtected state to the signal context in both 32 and 64 bit. Signed-off-by: NMatt Evans <matt@ozlabs.org> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
This hooks the new transactional memory code into context switching, FP/VMX/VMX unavailable and exception return. Signed-off-by: NMatt Evans <matt@ozlabs.org> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
We do lazy FP but not lazy TM (ie. userspace starts with MSR TM=1 FP=0). Hence if userspace does an FP instruction during a transaction, we'll take an fp unavailable exception. This adds functions needed to handle this case. We have to inject the current FP state into the checkpoint so that the hardware can decide what to do with the transaction. We can't inject only the FP so we have to do a full treclaim and recheckpoint to inject just the FP state. This will cause the transaction to be marked as aborted by the hardware. This just add the routines needed to do this for FP, VMX and VSX. It doesn't hook them into the rest of the code yet. Signed-off-by: NMatt Evans <matt@ozlabs.org> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
These should never happen since we always turn on MSR TM when in userspace. We don't do lazy TM. Hence if we hit this, we barf and kill the task as something's gone horribly wrong. Signed-off-by: NMatt Evans <matt@ozlabs.org> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
powerpc: Add reclaim and recheckpoint functions for context switching transactional memory processes When we switch out a task, we need to save both the checkpointed and the speculated state into the thread struct. Similarly when we are switching in a task we need to load both the checkpointed and speculated state. If the task was using FP, we non-lazily reload both the original and the speculative FP register states. This is because the kernel doesn't see if/when a TM rollback occurs, so if we take an FP unavoidable later, we are unable to determine which set of FP regs need to be restored. This simply adds these functions. It doesn't hook them into the existing code yet. Signed-off-by: NMatt Evans <matt@ozlabs.org> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
This adds functions to restore the state of the FP/VSX registers from what's stored in the thread_struct. Two version for FP/VSX are required since one restores them from transactional/checkpoint side of the thread_struct and the other from the speculated side. Similar functions are added for VMX registers. Signed-off-by: NMatt Evans <matt@ozlabs.org> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
Here we add the helper functions to be used when context switching. These allow us to fully reclaim and recheckpoint a transaction. We introduce a new paca field called tm_scratch to help us store away register values when doing the low level tm reclaim register save. Signed-off-by: NMatt Evans <matt@ozlabs.org> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
Add transactional memory paca scratch register to show_regs. This is useful for debugging. Signed-off-by: NMatt Evans <matt@ozlabs.org> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
Defines for MSR bits and transactional memory related SPRs TFIAR, TEXASR and TEXASRU. Signed-off-by: NMatt Evans <matt@ozlabs.org> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
This adds new macros for saving and restoring checkpointed architected state from and to the thread_struct. It also adds some debugging macros for when your brain explodes trying to debug your transactional memory enabled kernel. Signed-off-by: NMatt Evans <matt@ozlabs.org> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
Set of new archtected state for saving away on context switch. Signed-off-by: NMatt Evans <matt@ozlabs.org> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
Here we define the new instructions we need for transactional memory in the kernel. This is so we can support compiling with binutils that don't support the new transactional memory instructions. Transactional memory results in two sets of architected state (GPRs/VSRs etc). treclaim allows us to read the checkpointed state (from the tbegin) so that we can store it away on a context switch. It does this by overwriting the exiting architected state, so you have to save that away before you treclaim. treclaim will also abort a transaction, so you can give a register value which contains an abort reason. trecheckpoint allows us to inject into the checkpointed state as if it were at the tbegin. It does this by copying the current architected state into the checkpointed state. Signed-off-by: NMatt Evans <matt@ozlabs.org> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
Signed-off-by: NMatt Evans <matt@ozlabs.org> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
In commit 466921c5 we added a hack to set the paca data_offset to zero so that per-cpu accesses would work on the boot cpu prior to per-cpu areas being setup. This fixed a problem with lockdep touching per-cpu areas very early in boot. However if we combine CONFIG_LOCK_STAT=y with any of the PPC_EARLY_DEBUG options, we can hit the same problem in udbg_early_init(). To avoid that we need to set the data_offset of the boot_paca also. So factor out the fixup logic and call it for both the boot_paca, and "the paca of the boot cpu". Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Tested-by: NGeoff Levand <geoff@infradead.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Geoff Levand 提交于
The powerpc boot_paca symbol is now only used within the early_setup() routine, so move it from its global definition into early_setup(). Signed-off-by: NGeoff Levand <geoff@infradead.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Geoff Levand 提交于
Signed-off-by: NGeoff Levand <geoff@infradead.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Geoff Levand 提交于
Signed-off-by: NGeoff Levand <geoff@infradead.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Geoff Levand 提交于
To allow more control of the verbosity of ps3_result() add a check for the preprocessor macro PS3_VERBOSE_RESULT that builds a verbose verion of the ps3_result() routine. Signed-off-by: NGeoff Levand <geoff@infradead.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-